Problem: layout i.e. whitespace that is part of codelenses is currently
displayed as weird symbols and large amounts of spaces
Solution: replace all consecutive whitespace symbols with a single space
character when trying to display codelenses as virtual text
Problem: getregionpos() wrong with blockwise mode and multibyte.
Solution: Use textcol and textlen instead of start_vcol and end_vcol.
Handle coladd properly (zeertzjq).
Also remove unnecessary buflist_findnr() in add_regionpos_range(), as
getregionpos() has already switched buffer.
closes: vim/vim#14805c95e64f41f
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: vim/vim#14609closes: vim/vim#14617b4757e627e
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: On nvim 11.0-dev, deprecation warnings due to an use of
hard-deprecated APIs such as:
- `vim.diagnostic.disable()`
- `vim.diagnostic.is_disabled()`
etc. are not accompanied by backtrace information. It makes difficult
for users to figure out which lines or which plugins are still using
deprecated APIs.
Solution: use `backtrace = true` in vim.deprecate() call.
The namespacing for healthchecks for neovim modules is inconsistent and
confusing. The completion for `:checkhealth` with `--clean` gives
```
nvim
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
vim.lsp
vim.treesitter
```
There are now three top-level module names for nvim: `nvim`, `provider`
and `vim` with no signs of stopping. The `nvim` name is especially
confusing as it does not contain all neovim checkhealths, which makes it
almost a decoy healthcheck.
The confusion only worsens if you add plugins to the mix:
```
lazy
mason
nvim
nvim-treesitter
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
telescope
vim.lsp
vim.treesitter
```
Another problem with the current approach is that it's not easy to run
nvim-only healthchecks since they don't share the same namespace. The
current approach would be to run `:che nvim vim.* provider.*` and would
also require the user to know these are the neovim modules.
Instead, use this alternative structure:
```
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
and
```
lazy
mason
nvim-treesitter
telescope
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
Now, the entries are properly sorted and running nvim-only healthchecks
requires running only `:che vim.*`.
The optimizations that vim.iter uses for array-like tables don't require
that the source table has no holes. The only thing that needs to change
is the determination if a table is "list-like": rather than requiring
consecutive, integer keys, we can simply test for (positive) integer
keys only, and remove any holes in the original array when we make a
copy for the iterator.
Problem: `has-ancestor?` is O(n²) for the depth of the tree since it iterates over each of the node's ancestors (bottom-up), and each ancestor takes O(n) time.
This happens because tree-sitter's nodes don't store their parent nodes, and the tree is searched (top-down) each time a new parent is requested.
Solution: Make use of new `ts_node_child_containing_descendant()` in tree-sitter v0.22.6 (which is now the minimum required version) to rewrite the `has-ancestor?` predicate in C to become O(n).
For a sample file, decreases the time taken by `has-ancestor?` from 360ms to 6ms.
Problem:
vim.fs.normalize() normalizes too much vim.loader and is slow.
Solution:
Make it faster by doing less. This reduces the times spent in
vim.fs.normalize in vim.loader from ~13ms -> 1-2ms.
Numbers from a relative benchmark:
- Skipping `vim.validate()`: 285ms -> 230ms
- Skipping `path_resolve_dot()`: 285ms -> 60ms
- Skipping `double_slash`: 60ms -> 35ms
Closes https://github.com/neovim/neovim/issues/28484.
Closes https://github.com/neovim/neovim/issues/28719.
Co-authored-by: Chris <crwebb85@gmail.com>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Jake B <16889000+jakethedev@users.noreply.github.com>
Co-authored-by: Jonathan Raines <jonathan.s.raines@gmail.com>
Co-authored-by: Yi Ming <ofseed@foxmail.com>
Co-authored-by: Zane Dufour <zane@znd4.me>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Re-normalizing a path after a `joinpath` isn't necessary. Calling
`normalize` on each child directory had quite a bit of impact when
traversing a large directory.
A simple test showed:
Before: ~144ms
After: ~80ms
running the following logic against a dir with 4367 child folders and
25826 files:
local files = {}
local start = uv.hrtime()
for name, type in vim.fs.dir(path, { depth = max_depth }) do
table.insert(files, { name, type })
end
local duration = uv.hrtime() - start
Relates to https://github.com/neovim/neovim/issues/23291
Problem: The column width 10 for parser name (lang) is too short.
For example, `markdown_inline` has 15 characters, which results in a
slight misalignment with other lines.
e.g. it looked like:
```
- OK Parser: markdown ABI: 14, path: .../parser/markdown.so
- OK Parser: markdown_inline ABI: 14, path: .../parser/markdown_inline.so
- OK Parser: php ABI: 14, path: .../parser/php.so
```
Solution: Use column width 20. As of now, the longest name among those
available in nvim-treesitter has length 18 (`haskell_persistent`).
e.g.:
```
- OK Parser: markdown ABI: 14, path: .../parser/markdown.so
- OK Parser: markdown_inline ABI: 14, path: .../parser/markdown_inline.so
- OK Parser: php ABI: 14, path: .../parser/php.so
```
Problem:
The nvim_win_xx_ns function family introduced in ba0370b1d7
needs more bake-time. Currently it's narrowly defined for windows, but
other scopes ("buffer") and features are likely in the future.
Solution:
- Rename the API with double-underscore to mark it as EXPERIMENTAL.
TODO/FUTURE:
- Rename and change the signature to support more than just "window"
scope, and for other flexibility.
- Open question: we could choose either:
- "store scopes on namespaces", or
- "store namespaces on scopes (w:/b:/…)"
Problem: filetype: zsh module files are not recognized
Solution: Detect '*.mdh' and '*.epro' as C filetype, '*.mdd' as zsh
filetype, determine zsh-modules '*.pro' from from it's content
(Wu, Zhenyu)
closes: vim/vim#14737887a38cee7
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem:
The file watcher backends for Linux have too many limitations and
doesn't work reliably.
Solution:
disable didChangeWatchedFiles on Linux
Ref: #27807, #28058, #23291, #26520
Rename the field `result` to `params` in the `data` table for
`LspProgress` autocmds. This aligns with LspNotify.
The previous name was chosen because the initial handler implementation
mistakenly had a parameter name `result` instead of `params` for the
`$/progress` LSP "notification" handler. However, `params` would be a
more appropriate name that is more consistent with the underlying LSP
type (`ProgressParams`).
See also: https://microsoft.github.io/language-server-protocol/specifications/specification-current/#progress
Problem:
inlay_hint `enable(<no args>)` does not activate inlay hints on open
buffers. If a buffer does not have a corresponding `bufstate` in
`bufstates`, then `enable` all buffers will not take effect on it.
Solution:
Make the effective range determined by the loaded buffers.
Fix#28624
Revert the default LSP mappings before the 0.10 release as these might
need some further consideration. In particular, it's not clear if "c"
prefixed maps in Normal mode are acceptable as defaults since they
interfere with text objects or operator ranges.
We will re-introduce default mappings at the beginning of the 0.11
release cycle, this reversion is only for the imminent 0.10 release.
