Problem:
Language server version information missing from `:checkhealth vim.lsp`.
Solution:
Store `InitializeResult.serverInfo.version` from the `initialize`
response and display for each client in `:checkhealth vim.lsp`.
Problem: cannot highlight completed text
Solution: (optionally) highlight auto-completed text using the
ComplMatchIns highlight group (glepnir)
closes: vim/vim#161736a38aff218
Co-authored-by: glepnir <glephunter@gmail.com>
When a terminal application running inside the terminal emulator sets
the cursor shape or blink status of the cursor, update the cursor in the
parent terminal to match.
This removes the "virtual cursor" that has been in use by the terminal
emulator since the beginning. The original rationale for using the
virtual cursor was to avoid having to support additional UI methods to
change the cursor color for other (non-TUI) UIs, instead relying on the
TermCursor and TermCursorNC highlight groups.
The TermCursor highlight group is now used in the default 'guicursor'
value, which has a new entry for Terminal mode. However, the
TermCursorNC highlight group is no longer supported: since terminal
windows now use the real cursor, when the window is not focused there is
no cursor displayed in the window at all, so there is nothing to
highlight. Users can still use the StatusLineTermNC highlight group to
differentiate non-focused terminal windows.
BREAKING CHANGE: The TermCursorNC highlight group is no longer supported.
Problem: hard to view an existing buffer in the preview window
Solution: add the :pbuffer command (Yinzuo Jiang)
Similar as `:pedit` and `:buffer` command. `:pbuffer` edits buffer [N]
from the buffer list in the preview window.
`:pbuffer` can also open special buffer, for example terminal buffer.
closes: vim/vim#16222a2a2fe841e
Cherry-pick Test_popup_and_previewwindow_dump() changes from patch
9.0.0625.
Cherry-pick Run_noroom_for_newwindow_test() changes from patches
8.2.0432 and 9.0.0363.
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
1) move the section at :h inclusive-motion-selection-exclusive a few
lines below, so that it doesn't live in between the 2 exceptions.
2) remove the tag :h :!-range. It's not accurate (because it is actually
a filter) and this command is already described at :h :range!
0a4e57f44a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
- API functions using `try_start` directly, do not surface the
underlying error message, and instead show generic messages.
- Error-handling code is duplicated in the API impl.
- Failure modes are not tested.
Solution:
- Use `TRY_WRAP`.
- Add tests.
Problem:
Since e049c6e4c0, most statusline-like UI elements can combine
highlight attrs, except for sign/statuscolumn.
Solution:
Implement for sign/statuscolumn.
Problem: filetype: some assembler are files not recognized
Solution: detect '*.nasm' files as nasm filetype and '*.masm' as masm
filetype (Wu, Zhenyu)
closes: vim/vim#16194d66d68763d
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
**Problem:** Currently, it is difficult to get node(s)-level metadata
for a capture returned by `get_captures_at_pos()`. This is because it is
stored in `metadata[id]` and we do not have access to the value of `id`,
so to get this value we have to iterate over the keys of `metadata`. See
[this commit](d636229300 (diff-8bd4742121c2f359d0345f3c6c253a58220f1a28670cc4e1c957992232059a6cR16)).
Things would be much simpler if we were given the `id` of the capture so
we could use it to just index `metadata` directly.
**Solution:** Include `id` in the data returned by
`get_captures_at_pos()`
Design goals/requirements:
- Default configuration of a server can be distributed across multiple sources.
- And via RTP discovery.
- Default configuration can be specified for all servers.
- Configuration _can_ be project specific.
Solution:
- Two new API's:
- `vim.lsp.config(name, cfg)`:
- Used to define default configurations for servers of name.
- Can be used like a table or called as a function.
- Use `vim.lsp.confg('*', cfg)` to specify default config for all
servers.
- `vim.lsp.enable(name)`
- Used to enable servers of name. Uses configuration defined
via `vim.lsp.config()`.
- Problem: cannot replace the initial bufwrite message (from `filemess`) by the final one (`"test.lua" [New] 0L, 0B written`), when using `vim.ui_attach`.
- Solution: add kind to both messages.
Since Vietnamese keymaps in Vim is quite differences from the
corresponding input methods, let's document the Vietnamese specifics in
vietnames.txt
related: vim/vim#16144189e24bb14
Problem: Variable name for 'messagesopt' doesn't match short name
(after v9.1.0908)
Solution: Change p_meo to p_mopt. Add more details to docs.
closes: vim/vim#161828cc43daee1
Problem: 'messagesopt' does not check max wait time
(after v9.1.0908)
Solution: Check for max wait value
(Shougo Matsushita)
closes: vim/vim#16183d9e9f89e0f
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: :sleep! not hiding the cursor is an arbitrary difference from
Vim without obvious justification, and Vim's behavior isn't
easily achievable in Nvim.
Solution: Make :sleep! hide the cursor while sleeping.
Ref:
6a01b3fcc3b5c0ade437
Problem:
vim.json.encode escapes every slash in string values (for example in
file paths), and is not optional. Use-case is for preventing HTML
injections (eg. injecting `</script>` closing tag); in the context of
Nvim this is rarely useful.
Solution:
- Add a `escape_slash` flag to `vim.json.encode`.
- Defaults to `false`. (This is a "breaking" change, but more like
a bug fix.)
This commit also implements more generic trimming, acting on all
whitespace (charwise) rather than just empty lines.
It will unblock
https://github.com/nvim-treesitter/nvim-treesitter/pull/3442 and allow
for properly concealing markdown bullet markers regardless of indent
width, e.g.
Problem: Paragraph below bulleted list was joined to last list item instead of dropping below as expected. Same with "Notes:" paragraph below it.
Solution: Added necessary newlines.
Problem: In an autocommand Lua callback whether `args.file` is expanded
depends on whether `expand('<afile>')` has been called.
Solution: Always use the unexpanded file name for `args.file`.
Related to #31306 and vim/vim#16106. This doesn't provide `sfname`, but
at least makes `args.file` have a consistent value.
Problem: Missing information in CompleteDone event
Solution: add complete_word and complete_type to v:event dict
(glepnir)
closes: vim/vim#161531c5a120a70
1. Use the new "u" action to update the quickfix list so we don't lose
our position in the quickfix list when updating it.
2. Rather than creating a new quickfix list each time, update the
exiting one if we've already created one.
