Problem:
Error when calling vim.treesitter.start() and vim.treesitter.stop() in
init.lua.
Solution:
Ensure syntaxset augroup exists after loading synload.vim.
Although the built-in pum completion mechanism will filter anyway on the
next input it is odd if the initial popup shows entries which don't
match the current prefix.
Using fuzzy match on the label/prefix is compatible with
`completeopt+=fuzzy` and also doesn't seem to break postfix snippet
cases
Closes https://github.com/neovim/neovim/issues/29287
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
Problem: with a single `context.options` there is no way for user to
force which scope (local, global, both) is being temporarily set and
later restored.
Solution: replace single `options` context with `bo`, `go`, `wo`, and
`o`. Naming and implementation follows how options can be set directly
with `vim.*` (like `vim.bo`, etc.).
Options are set for possible target `win` or `buf` context.
Problem: `vim._with()` has many different use cases which are not
covered with tests.
Solution: cover with tests. Some (many) test cases are intentionally
marked as "pending" because they cover cases which don't work as
expected at the moment (and fixing them requires specific knowledge of
C codebase). Use them as a reference for future fixes.
Also some of "can be nested" tests currently might pass only because
the tested context doesn't work.
Instead of looping over all captured nodes, just take the end range from
the last node in the list. This uses the fact that nodes returned by
iter_matches are ordered by their range (earlier to later).
Problem: Treesitter highlighter clears the already populated highlight
state when performing spell checking while drawing a
smoothscrolled topline.
Solution: Save and restore the highlight state in the highlighter's
_on_spell_nav callback.
Problem:
`o`-ing on a folded line opens the fold, because the new line gets the
fold level from the above line (level '='), which extends the fold to
the new line. `O` has a similar problem when run on the line below a
fold.
Solution:
Use -1 for the added line to get the lower level from the above/below
line.
Problem: CurSearch highlight is often wrong.
Solution: Remember the last highlighted position and redraw when needed.
368137aa52
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Hit assert when clicking inside a padded 'statuscolumn' that
is padded beyond the length of the allocated click_defs.
Solution: Still consider this a "in_statuscol" click, but return early
when about to execute the click func.
Followup to #28515:
Rename the static os_homedir() to os_uv_homedir() to emphasize that it
is a wrapper around a libuv function.
Add the function os_get_homedir() to os/env.c to return the cached
homedir value as a const. Must be called after homedir is initialized or
it fails.
The difference between this function and the static os_uv_homedir() is
that the latter gets the homedir from libuv and is used to initialize
homedir in init_homedir(), while os_get_homedir() just returns homedir
as a const if it's initialized and is public.
Use the os_get_homedir() accessor for ~/ expansion on Windows to make
the code more concise.
Add a Windows section to main_spec.lua with tests for expanding ~/ and
~\ prefixes for files passed in on the command-line.
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Do the expansion right after setting the expand context, so that the
length of the completion prefix can be set, but don't do that directly
in set_one_cmd_context(), as that's also called by getcmdcompltype().
Problem: matched text is highlighted case-sensitively
Solution: use MB_STRNICMP, update highlighting when the base changes
(glepnir)
fixes: vim/vim#15021closes: vim/vim#15023f189138b39
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Matched text isn't highlighted in cmdline pum.
Solution: Use cmdline completion pattern in cmdline mode.
(zeertzjq)
closes: vim/vim#15029d8c9340fc6
Cherry-pick syntax.txt change from runtime update.
Problem: Wrong matched text highlighted in pum with 'rightleft'.
Solution: Match using the original text instead of the reversed text.
(zeertzjq)
closes: vim/vim#1502063901e8963
Problem: A custom 'statuscolumn' needs to check a bunch of options and
placed signs to replicate the default number column.
Solution: Rework %l item to include the necessary logic to mimic the
default number column. Remove now redundant %r item.
Problem: Cmdline pum doesn't work properly with 'rightleft'.
Solution: Don't use curwin->w_p_rl in cmdline mode in pum_redraw(). Use
a static variable since pum_may_redraw() may be called in any
mode. Also correct position of other popups with 'rightleft'.
(zeertzjq)
closes: vim/vim#15005883018feff
Problem: Wrong padding for pum "kind" with 'rightleft'.
Solution: Fix off-by-one error (zeertzjq).
The screen_fill() above is end-exclusive, and
- With 'rightleft' it fills `pum_col - pum_base_width - n + 1` to `col`,
so the next `col` should be `pum_col - pum_base_width - n`.
- With 'norightleft' it fills `col` to `pum_col - pum_base_width + n - 1`,
so the next `col` should be `pum_col - pum_base_width + n`.
closes: vim/vim#15004a2324373eb
Problem:
When 'ignorecase' is set, the default keymap Q and Q would exit visual
mode.
This issue was raised in #28287 and a fix was applied in #28289.
However, `==` operator is subject to user `ignorecase` setting.
Solution:
Switching to `==#` operator would guarantee case sensitive comparison
between visual mode and linewise visual mode.
Co-authored-by: Kuanju Chen <kuanju.chen@mksinst.com>
Problem: Matched text shouldn't be highlighted in "kind" and "menu".
Solution: Pass hlf_T instead of the attribute. Fix indent.
(zeertzjq)
closes: vim/vim#14996afbe5359e9
Problem: Cannot see matched text in popup menu
Solution: Introduce 2 new highlighting groups: PmenuMatch and
PmenuMatchSel (glepnir)
closes: vim/vim#1469440c1c3317d
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
For snippets lsp.completion prefers the label if it is shorter than the
insertText or textEdit to support postfix completion cases but clangd
adds decoration characters to labels. E.g.: `•INT16_C(c)`
Solution:
Use parse_snippet on insertText/textEdit before checking if it is
shorter than the label.
Fixes https://github.com/neovim/neovim/issues/29301
Problem: both `StatusLineTerm`/`StatusLineTermNC` are now explicitly
used, but `:color vim` does not set them to the values used in Vim.
This might be fine if `:color vim` is treated as "the state of default
color scheme prior the big update", but it seems to be better treated
as "Vim's default color scheme" (how it is documented in its header).
Solution: add `StatusLineTerm`/`StatusLineTermNC` definitions to
'runtime/colors/vim.lua'.
Use explicit foreground colors ('Whte'/'Black') instead of `guifg=bg`
used in source, as the latter caused some problems in the past (if
`Normal` is not defined, `nvim_set_hl()` can't recognize `'bg'` as the
foreground value).
Also realign the rest of the background conditional highlight groups.
This reduces the number of nil checks around buf_versions usage
Test changes were lifted from 5c33815
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
These highlight groups are used for the statusline in :terminal windows.
By default they link to StatusLine and StatusLineNC (respectively), so
there is no visual difference unless a colorscheme defines these groups
separately.
When libvterm receives the OSC 52 escape sequence it ignores it because
Nvim does not set any selection callbacks. Install selection callbacks
that forward to the clipboard provider, so that setting the clipboard
with OSC 52 in the embedded terminal writes to the system clipboard
using the configured clipboard provider.
Problem: Legacy :sign API still allows placing signs beyond the end of
the buffer. This is unaccounted for by the signcolumn tracking
logic and is disallowed in general for the extmark API which
implements it now.
Solution: Clamp legacy sign line number to the length of the buffer.
This change fixes an issue where glob patterns like `{a,ab}` would not
match `ab` because the first option `a` matches, then the end of the
string is expected but `b` is found, and LPeg does not backtrack to try
the next option `ab` which would match. The fix here is to also append
the rest of the pattern to the generated LPeg pattern for each option.
This changes a glob `{a,ab}` from being parsed as
("a" or "ab") "end of string"
to
("a" "end of string" or "ab" "end of string")
Here, matching against `ab` would try the first option, fail to match,
then proceed to the next option, and match.
The sacrifice this change makes is dropping support for nested `{}`
conditions, which VSCode doesn't seem to support or test AFAICT.
Fixes#28931
Co-authored-by: Sergey Slipchenko <faergeek@gmail.com>
It's a function to perform operations in their own sealed context,
similar to pythons `with`. This helps ease operations where you need to
perform an operation in a specific context, and then restore the
context.
Marked as private for now as it's not ready for public use. The current
plan is to start using this internally so we can discover and fix any
problems. Once this is ready to be exposed it will be renamed to
`vim.with`.
Usage:
```lua
local ret = vim._with({context = val}, function()
return "hello"
end)
```
, where `context` is any combination of:
- `buf`
- `emsg_silent`
- `hide`
- `horizontal`
- `keepalt`
- `keepjumps`
- `keepmarks`
- `keeppatterns`
- `lockmarks`
- `noautocmd`
- `options`
- `sandbox`
- `silent`
- `unsilent`
- `win`
(except for `win` and `buf` which can't be used at the same time). This
list will most likely be expanded in the future.
Work on https://github.com/neovim/neovim/issues/19832.
Co-authored-by: Lewis Russell <lewis6991@gmail.com>
Problem:
Text edits with the same position (both line and character) were being
reverse sorted prior to being applied which differs from the lsp spec
Solution:
Change the sort order for just the same position edits
* Revert "fix(lsp): account for changedtick version gap on modified reset (#29170)"
This reverts commit 2e6d295f79.
* Revert "refactor(lsp): replace util.buf_versions with changedtick (#28943)"
This reverts commit 5c33815448.
