Problem: filetype: some assembler are files not recognized
Solution: detect '*.nasm' files as nasm filetype and '*.masm' as masm
filetype (Wu, Zhenyu)
closes: vim/vim#16194d66d68763d
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: various vartabstop and shiftround bugs when shifting lines
Solution: Fix the bugs, add new tests for shifting lines in various ways
(Gary Johnson)
fixes: vim/vim#14891closes: vim/vim#16193eed63f96d2
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: [security]: prevent overflow in indenting
Solution: use long long and remove cast to (int)
The shiftwidth option values are defined as being long. However, when
calculating the actual amount of indent, we cast down to (int), which
may cause the shiftwidth value to become negative and later it may even
cause Vim to try to allocate a huge amount of memory.
We already use long and long long variable types to calculate the indent
(and detect possible overflows), so the cast to (int) seems superfluous
and can be safely removed. So let's just remove the (int) cast and
calculate the indent using longs.
Additionally, the 'shiftwidth' option value is also used when determining
the actual 'cino' options. There it can again cause another overflow, so
make sure it is safe in parse_cino() as well.
fixes: vim/vim#13554closes: vim/vim#135553770574e4a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in shift_line
Solution: allow a max indent of INT_MAX
[security]: overflow in shift_line
When shifting lines in operator pending mode and using a very large
value, we may overflow the size of integer. Fix this by using a long
variable, testing if the result would be larger than INT_MAX and if so,
indent by INT_MAX value.
Special case: We cannot use long here, since on 32bit architectures (or
on Windows?), it typically cannot take larger values than a plain int,
so we have to use long long count, decide whether the resulting
multiplication of the shiftwidth value * amount is larger than INT_MAX
and if so, we will store INT_MAX as possible larges value in the long
long count variable.
Then we can safely cast it back to int when calling the functions to set
the indent (set_indent() or change_indent()). So this should be safe.
Add a test that when using a huge value in operator pending mode for
shifting, we will shift by INT_MAX
closes: vim/vim#135356bf131888a
Skip the test for now, as it takes too long and requires other fixes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: GVim: default font size a bit too small
Solution: increase guifont size to 12 pt on GTK builds
of gVim (matveyt).
fixes: vim/vim#16172closes: vim/vim#16178ad3b6a3340
Co-authored-by: matveyt <matthewtarasov@yandex.ru>
Problem: no error check for neg values for 'messagesopt'
(after v9.1.0908)
Solution: add additional error checks and tests (h-east)
closes: vim/vim#1618765be834c30
Nvim's getdigits() checks for overflow, so the code change isn't needed.
Co-authored-by: h-east <h.east.727@gmail.com>
Problem: Variable name for 'messagesopt' doesn't match short name
(after v9.1.0908)
Solution: Change p_meo to p_mopt. Add more details to docs.
closes: vim/vim#161828cc43daee1
Problem: 'messagesopt' does not check max wait time
(after v9.1.0908)
Solution: Check for max wait value
(Shougo Matsushita)
closes: vim/vim#16183d9e9f89e0f
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Missing information in CompleteDone event
Solution: add complete_word and complete_type to v:event dict
(glepnir)
closes: vim/vim#161531c5a120a70
Problem: filetype: Conda configuration files are not recognized
Solution: detect '.condarc' and 'condarc' files as yaml filetype.
(zeertzjq)
closes: vim/vim#16162876de275cb
Problem: default for 'backspace' can be set in C code
Solution: promote the default for 'backspace' from defaults.vim to the C
code (Luca Saccarola)
closes: vim/vim#16143959ef61430
N/A patches:
vim-patch:9.1.0895: default history value is too small
vim-patch:075aeea: runtime(doc): document changed default value for 'history'
Co-authored-by: Luca Saccarola <github.e41mv@aleeas.com>
Problem: runtime(compiler): pytest compiler not included
Solution: include pytest compiler, update the compiler completion test
(Konfekt)
closes: vim/vim#161303c2596a9e9
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Problem: completion list wrong after v9.1.0891
Solution: update compl_mach_array after leader change
(glepnir)
compl_shown_match update not correct after refactoring in v9.1.0891
Unfortunately, this regressed what item is selected after leader change.
So generate compl_match_array before updating compl_shown_match range,
and split generate compl_match_array into range match_head
fixes: https://github.com/vim/vim/issues/16128
closes: https://github.com/vim/vim/pull/16129a49c077a88
Problem: the max value of 'cmdheight' is limited by other tabpages
Solution: Limit the maximum value of 'cmdheight' to the current tabpage only.
(Milly)
The Help says that cmdheight is local to the tab page, but says nothing
about the maximum value depending on the state of all tab pages. Users
may wonder why they can't increase cmdheight when there are still rows
available on the current tab page. This PR changes the behavior of
cmdheight so that its maximum value depends only on the state of the
current tab page.
Also, since magic numbers were embedded in various places with the
minimum value of cmdheight being 1, we defined a constant to make it
easier to understand.
closes: vim/vim#161312cddf0e85a
Cherry-pick Test_cmdheight_not_changed() from patch 9.0.0187.
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: 'fileencodings' default value should depend on 'encoding'. (Gary
Johnson)
Solution: When 'encoding' is "utf-8" use a different default value for
'fileencodings'.
5ffefbb35a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No test for what the spotbug compiler parses
(after commit: 65311c6f472de67b368)
Solution: Test &makeprg for the SpotBugs compiler plugin
(Aliaksei Budavei)
closes: vim/vim#1609660ddb1a140
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: %! item not allowed for 'rulerformat'
(yatinlala)
Solution: also allow to use %! for rulerformat option
(Yegappan Lakshmanan)
fixes: vim/vim#16091closes: vim/vim#16118ac023e8baa
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: filetype: openCL files are not recognized
Solution: detect '*.cl' files as opencl or lisp filetype,
include a opencl syntax and filetype plugin (Wu, Zhenyu)
closes: vim/vim#15825e2c27ca8ef
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: karel files are not detected
Solution: detect '*.kl' files as karel filetype,
include syntax and filetype plugin
(Kirill Morozov)
closes: vim/vim#16075fdac54d7bb
Co-authored-by: Kirill Morozov <kirill@robotix.pro>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Problem: curswant not set on gm in folded line
(citizenmatt)
Solution: in a folded line, call update_curswant_force()
fixes: vim/vim#11596closes: vim/vim#11994closes: vim/vim#153989848face74
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: setting 'cmdheight' may cause hit-enter-prompt and echo output
to be missing
Solution: Before cleaning the cmdline, check the need_wait_return flag
(nwounkn)
closes: vim/vim#134322e48567007
Co-authored-by: nwounkn <nwounkn@gmail.com>
Problem: message history is fixed to 200
Solution: Add the 'msghistory' option, increase the default
value to 500 (Shougo Matsushita)
closes: vim/vim#160484bd9b2b246
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: filetype: leo files are not recognized
Solution: detect '*.leo' files as leo filetype, include
a filetype plugin (Riley Bruins)
References:
https://github.com/ProvableHQ/leocloses: vim/vim#1598893f65a4ab8
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
Problem: tests: still preferring python2 over python3
Solution: prefer Python 3 when picking a Python program in Vim tests,
by checking for the more specific python version first and
only when python3 not found, check for the python binary
(Yee Cheng Chin)
Most OSes have Python 3 mapped to `python3` instead of `python`. Vim
tests should prioritize using that instead of Python 2 in case that is
still installed on the host system.
closes: vim/vim#15986cef8ab2c75
Cherry-pick test changes from patch 8.2.{2824,4684}.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem:
There are three different ways of marking an option as hidden, `enable_if
= false`, `hidden = true` and `immutable = true`. These also have different
behaviors. Options hidden with `enable_if = false` can't have their value
fetched using Vim script or the API, but options hidden with `hidden = true` or
`immutable = true` can. On the other hand, options with `hidden = true` do not
error when trying to set their value, but options with `immutable = true` do.
Solution:
Remove `enable_if = false`, remove the `hidden` property for options, and use
`immutable = true` to mark an option as hidden instead. Also make hidden option
variable pointers always point to the default value, which allows fetching the
value of every hidden option using Vim script and the API. This does also mean
that trying to set a hidden option will now give an error instead of just being
ignored.
Problem: :setglobal doesn't work properly for 'ffu' and 'tsrfu' when
the local value is set (after v9.1.0831)
Solution: Check os_flags instead of buffer option variable (zeertzjq).
closes: vim/vim#159806eda269600
Problem: :set doesn't work for 'cot' and 'bkc' after :setlocal.
Solution: clear the local flags when using :set (zeertzjq).
closes: vim/vim#1598146dcd84d24
Problem: 'findexpr' can't be used for lambads
(Justin Keyes)
Solution: Replace the findexpr option with the findfunc option
(Yegappan Lakshmanan)
related: vim/vim#15905closes: vim/vim#15976a13f3a4f5d
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: using wrong highlight group for spaces for popupmenu
Solution: use original attribute instead of combined attributed
(glepnir)
closes: vim/vim#15978bc10be7a40
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: sway files are not recognized
Solution: detect '*.sw' files as sway filetype, include
a filetype plugin (Riley Bruins)
References:
https://github.com/FuelLabs/sway.
Comments taken from their syntax documentation. File extension taken
from the same documentation/GitHub's own recognition of these file types
closes: vim/vim#1597384b5b1c660
Co-authored-by: Riley Bruins <ribru17@hotmail.com>
