Skipped importing the following unit tests from libtermkey as they'd
require introducing a lot of unused code or require more effort to port
than is probably worth:
- 05read
- 12strpkey
- 20canon
- 40ti-override
Problem:
floating windows did not correctly inherit the NormalFloat highlight
group from the global namespace when it was not defined in the window-specific
namespace. This led to floating windows losing their background highlight when
switching between namespaces.
Solution:
Updated the window highlight logic in update_window_hl() to handle the fallback.
This fix resolves issues with floating window backgrounds not displaying as expected
in certain namespace configurations.
$NVIM_LOG_FILE: /Users/runner/work/neovim/neovim/build/.nvimlog
WRN 2024-09-08T21:48:13.279 ?.21134 vim_mktempdir:3281: $TMPDIR tempdir not a directory (or does not exist): TMPDIR-should-be-ignored
WRN 2024-09-08T21:48:13.312 ?.21137 vim_mktempdir:3281: $TMPDIR tempdir not a directory (or does not exist): TMPDIR-should-be-ignored
- `alter_slashes` belongs in `testutil.lua`, not `testnvim.lua`.
- `alter_slashes` is an unusual name. Rename it to `fix_slashes`.
- invert its behavior, to emphasize that `/` slashes are the preferred,
pervasive convention, not `\` slashes.
Problem:
If $NVIM_APPNAME is a relative dir path, Nvim fails to start its
primary/default server, and `v:servername` is empty.
Root cause is d34c64e342, but this wasn't
noticed until 96128a5076 started reporting the error more loudly.
Solution:
- `server_address_new`: replace slashes "/" in the appname before using
it as a servername.
- `vim_mktempdir`: always prefer the system-wide top-level "nvim.user/"
directory. That isn't intended to be specific to NVIM_APPNAME; rather,
each *subdirectory* ("nvim.user/xxx") is owned by each Nvim instance.
Nvim "apps" can be identified by the server socket(s) stored in those
per-Nvim subdirs.
fix#30256
Problem: vim.tbl_deep_extend had an undocumented feature where arrays
(integer-indexed tables) were not merged but compared literally (used
for merging default and user config, where one list should overwrite the
other completely). Turns out this behavior was relied on in quite a
number of plugins (even though it wasn't a robust solution even for that
use case, since lists of tables (e.g., plugin specs) can be array-like
as well).
Solution: Revert the removal of this special feature. Check for
list-like (contiguous integer indices) instead, as this is closer to the
intent. Document this behavior.
Problem:
$XDG_RUNTIME_DIR may be broken on WSL, which prevents starting (and even
building) Nvim. #30282
Solution:
- When startup fails, mention the servername in the error message.
- If an autogenerated server address fails, log an error and continue
with an empty `v:servername`. It's only fatal if a user provides a bad
`--listen` or `$NVIM_LISTEN_ADDRESS` address.
Before:
$ nvim --headless --listen ./hello.sock
nvim: Failed to --listen: "address already in use"
$ NVIM_LISTEN_ADDRESS='./hello.sock' ./build/bin/nvim --headless
nvim: Failed to --listen: "address already in use"
After:
$ nvim --headless --listen ./hello.sock
nvim: Failed to --listen: address already in use: "./hello.sock"
$ NVIM_LISTEN_ADDRESS='./hello.sock' ./build/bin/nvim --headless
nvim: Failed $NVIM_LISTEN_ADDRESS: address already in use: "./hello.sock"
Problem:
str_byteindex_enc could return an error if the index was longer than the
lline length. This was handled in each of the calls to it individually
Solution:
* Fix the call at the source level so that if the index is higher than
the line length, line length is returned as per LSP specification
* Remove pcalls on str_byteindex_enc calls. No longer needed now that
str_byteindex_enc has a bounds check.
Font-family names must be enclosed in quotation marks to ensure that
fonts are applied correctly when there are spaces in the name.
Fix an issue where multiple fonts specified in `vim.o.guifont` are
inserted as a single element, treating them as a single font.
Support for escaping commas with backslash and ignoring spaces
after a comma.
ref `:help 'guifont'`
Problem: Wrong breakindentopt=list:-1 with multibyte chars or TABs in
text matched by 'formatlistpat' (John M Devin)
Solution: Use the width of the match text (zeertzjq)
fixes: vim/vim#15634closes: vim/vim#1563561a6ac4d00
Problem: Resetting cell widths can make 'listchars' or 'fillchars'
invalid.
Solution: Check for conflicts when resetting cell widths (zeertzjq).
closes: vim/vim#1562966f65a46c5
Problem:
Since 96128a5076 the test logs have noise from tests that *expect*
failures:
$NVIM_LOG_FILE: /tmp/cirrus-ci-build/build/.nvimlog
(last 100 lines)
ERR 2024-09-04T13:38:45.181 T949.28335.0/c terminfo_start:486: uv_pipe_open failed: no such device or address
ERR 2024-09-04T13:38:45.181 T949.28335.0/c flush_buf:2527: uv_write failed: bad file descriptor
ERR 2024-09-04T13:38:45.181 T949.28335.0/c flush_buf:2527: uv_write failed: bad file descriptor
WRN 2024-09-04T13:43:43.294 ?.35904 server_start:173: Failed to start server: address already in use: /…/Xtest_tmpdir/…/T7159.35895.0
WRN 2024-09-04T13:43:43.314 ?.35907 server_start:173: Failed to start server: illegal operation on a directory: /
ERR 2024-09-04T13:43:43.332 ?.35909 socket_watcher_init:60: Host lookup failed: https://example.com
Solution:
Rewrite the test to use `vim.system()`. Set NVIM_LOG_FILE in the child
process to a "throwaway" logfile.
Problem: Marktree meta count still includes invalidated marks, making
guards that check the meta total ineffective.
Solution: Revise marktree metadata when in/revalidating a mark.
- The exclusion of lists was never justified in the commit history and is
the wrong thing to do for a function that deals with tables.
- Move the error checks out of the recursive path.
Fixes#23654
Problem: Newline causes E749 in Ex mode (after 9.1.0573).
Solution: Don't execute empty command followed by a newline.
closes: vim/vim#156142432b4a753
Cherry-pick code change from patch 8.2.3405.
Updated the `rpc.connect` function to support connecting to LSP servers
using hostnames, not just IP addresses. This change includes updates to
the documentation and additional test cases to verify the new
functionality.
- Modified `connect` function to resolve hostnames.
- Updated documentation to reflect the change.
- Added test case for connecting using hostname.
Added a TCP echo server utility function to the LSP test suite. This
server echoes the first message it receives and is used in tests to
verify LSP server connections via both IP address and hostname.
Refactored existing tests to use the new utility function.
Problem:
crash when calling nvim_buf_get_text() with a large negative start_col:
call nvim_buf_get_text(0, 0, -123456789, 0, 0, {})
Solution:
clamp start_col after subtracting it from the line length.
Problem:
137f98cf64 added the `create` parameter to `tmpname()` but didn't
fully implement it.
Solution:
- Update impl for the `os.tmpname()` codepath.
- Inspect all usages of `tmpname()`, update various tests.
Problem:
`nvim --listen` does not error on EADDRINUSE. #30123
Solution:
Now that `$NVIM_LISTEN_ADDRESS` is deprecated and input *only* (instead
of the old, ambiguous situation where it was both an input *and* an
output), we can be fail fast instead of trying to "recover". This
reverts the "recovery" behavior of
704ba4151e, but that was basically
a workaround for the fragility of `$NVIM_LISTEN_ADDRESS`.
For context, see https://github.com/neovim/neovim/pull/24738. Before
that PR, Nvim did not correctly handle captures with quantifiers. That
PR made the correct behavior opt-in to minimize breaking changes, with
the intention that the correct behavior would eventually become the
default. Users can still opt-in to the old (incorrect) behavior for now,
but this option will eventually be removed completely.
BREAKING CHANGE: Any plugin which uses `Query:iter_matches()` must
update their call sites to expect an array of nodes in the `match`
table, rather than a single node.
Problem: Window is updated with potentially invalid skipcol in recursive
window update path. I.e. cursor outside of visible range in
large line that does not fit.
Solution: Make sure it is valid (Luuk van Baal).
3d5065fc75
Problem: inserting with a count is inefficient
Solution: Disable calculation of the cursor position and topline, if a
count has been used (Ken Takata)
Optimize insertion when using :normal 10000ix.
This patch optimizes the insertion with a large count (e.g. `:normal
10000ix`).
It seems that calculation of the cursor position for a long line is slow
and it takes O(n^2). Disable the calculation if not needed.
Before:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m1.879s
user 0m1.328s
sys 0m0.139s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m5.574s
user 0m5.421s
sys 0m0.093s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m23.588s
user 0m23.187s
sys 0m0.140s
```
After:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m0.187s
user 0m0.046s
sys 0m0.093s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m0.217s
user 0m0.046s
sys 0m0.108s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m0.278s
user 0m0.093s
sys 0m0.140s
$ time ./vim --clean -c 'normal 80000ix' -cq!
real 0m0.494s
user 0m0.311s
sys 0m0.140s
$ time ./vim --clean -c 'normal 160000ix' -cq!
real 0m1.302s
user 0m1.140s
sys 0m0.094s
```
closes: vim/vim#1558809b80d23cf
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: completion is inserted on Enter with "noselect"
(Carman Fu)
Solution: check noselect before update compl_shown_match
(glepnir)
fixes: vim/vim#15526closes: vim/vim#15530753794bae8
Problem: Behavior of Enter in completion depends on typing speed.
Solution: Don't make whether Enter selects original text depend on
whether completion has been interrupted, which can happen
interactively with a slow completion function.
Problem: prefix can be a symbol like period, the fuzzy matching can't
handle it correctly.
Solution: when prefix is empty or a symbol add all lsp completion
result into matches.
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem:
Things like underlines are always given a default foreground highlight
regardless of the value of `sp`.
Solution:
Check for `sp` first, and apply that color to the text decoration color if it
exists.
Limitations:
If there is no value of `sp`, vim applies a text decoration color that matches
the foreground of the text. This is still not implemented (and seems like a much
more complex problem): in TOhtml, the underline will still be given a default
foreground highlight.
Problem: "dvgo" is not always an inclusive motion
(Iain King-Speir)
Solution: initialize the inclusive flag to false
fixes: vim/vim#15580closes: vim/vim#15582f8702aeb8f
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Installing treesitter parser is hard (harder than
climbing to heaven).
Solution: Add optional support for wasm parsers with `wasmtime`.
Notes:
* Needs to be enabled by setting `ENABLE_WASMTIME` for tree-sitter and
Neovim. Build with
`make CMAKE_EXTRA_FLAGS=-DENABLE_WASMTIME=ON
DEPS_CMAKE_FLAGS=-DENABLE_WASMTIME=ON`
* Adds optional Rust (obviously) and C11 dependencies.
* Wasmtime comes with a lot of features that can negatively affect
Neovim performance due to library and symbol table size. Make sure to
build with minimal features and full LTO.
* To reduce re-compilation times, install `sccache` and build with
`RUSTC_WRAPPER=<path/to/sccache> make ...`
Problem: The matchparen plugin is slow on a long line.
Solution: Don't use a regexp to get char at and before cursor.
(zeertzjq)
Example:
```vim
call setline(1, repeat(' foobar', 100000))
runtime plugin/matchparen.vim
normal! $hhhhhhhh
```
closes: vim/vim#1556881e7513c86
Problem: Wrong patlen value in ex_substitute() (after 9.1.0426).
Solution: Compute patlen after finding end separator.
(zeertzjq)
Add a more explicit test. The test already passes as the only case
where a overlarge patlen value matters was fixed by patch 9.1.0689.
closes: vim/vim#15565d1c8d2de4b
Problem: cannot set special highlight kind in popupmenu
Solution: add kind_hlgroup item to complete function
(glepnir)
closes: vim/vim#1556138f99a1f0d
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Some items of completion results include function signatures that can
cause the pum to be very long when a function has many params, because pum
scales with the longest word/abbr.
Solution: add custom covert function that can customise abbr to remove params.
Problem: mode() returns wrong value with <Cmd> mapping
Solution: Change decision priority of VIsual_active and move
visual mode a bit further down (kuuote)
closes: vim/vim#155330fd1cb1b1f
Co-authored-by: kuuote <znmxodq1@gmail.com>
Problem: zip-plugin has problems with special characters
(user202729)
Solution: escape '*?[\' on Unix and handle those chars
a bit differently on MS-Windows, add a test, check
before overwriting files
runtime(zip): small fixes for zip plugin
This does the following:
- verify the unzip plugin is executable when loading the autoload plugin
- handle extracting file names with '[*?\' in its name correctly by
escaping those characters for the unzip command (and handle those
characters a bit differently on MS-Windows, since the quoting is different)
- verify, that the extract plugin is not overwriting a file (could cause
a hang, because unzip asking for confirmation)
- add a test zip file which contains those special file names
fixes: vim/vim#15505closes: vim/vim#155197790ea0c68
Co-authored-by: Christian Brabandt <cb@256bit.org>
Upon `terminal_enter`, `mapped_ctrl_c` is set in order to avoid `CTRL-C`
interrupts (which is proxied to the terminal process instead), `os_inchar`
will then test `mapped_ctrl_c` against `State` and set `ctrl_c_interrupts=false`
which prevents `process_ctrl_c` from setting `got_int=true` in a terminal
state.
However, if `got_int` is set outside of `process_ctrl_c`, e.g. via
`interrupt()`, this will hang the neovim process as `terminal_execute` will
enter an endless loop as `got_int` will never be cleared causing `safe_vgetc`
to always return `Ctrl_C`.
A minimal example reproducing this bug:
```vim
:autocmd TermEnter * call timer_start(500, {-> interrupt()})
:terminal
:startinsert
```
To fix, we make sure `got_int` is cleared inside `terminal_execute` when
it detects `Ctrl_C`.
Closes#20726
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
When a C0 character is present in an OSC terminator (i.e. after the ESC
but before a \ (0x5c) or printable character), vterm executes the
control character and resets the current string fragment. If the C0
character is the final byte in the sequence, the string fragment has a
zero length. However, because the VT parser is still in the "escape"
state, vterm attempts to subtract 1 from the string length (to account
for the escape character). When the string fragment is empty, this
causes an underflow in the unsigned size variable, resulting in a buffer
overflow.
The fix is simple: explicitly check if the string length is non-zero
before subtracting.
