Fixes 2 failing tests in startup_spec.lua.
The Windows-only `--literal` option complicates support of "stdin-as-text
+ file-args" (#7679). Could work around it, but it's not worth
the trouble:
- users have a reasonable (and englightening) alternative: nvim +"n *"
- "always literal" is more consistent/predictable
- avoids platform-specific special-case
Unrelated changes:
- Replace fileno(stdxx) with STDXX_FILENO for consistency (not motivated
by any observed technical reason).
Until now, the default `:filetype ...` setup was skipped if the user
config touched `:filetype` in any way (including implicitly via `:syntax
on`). No one needs that, and it's very confusing.
Instead, proceed with `:filetype ... on` unless the user explicitly
called `:filetype ... off`.
closes#7765
Get terminal debugging info by starting Nvim with 'verbose' level 3:
nvim -V3log
This is like Vim's `:set termcap`, which was removed in Nvim (and would
be very awkward to restore because of the decoupled UI).
The flag enables the current local directory set by ":lcd" to be saved
to views which is the current default behaviour. The option can be
removed to disable this behaviour.
closes#7435
vim-patch:8.0.1289
Problem: Adding pattern to ":oldfiles" is not a generic solution.
Solution: Add the ":filter /pat/ cmd" command modifier. Only works for some
commands right now.
7b668e83d0
ex_loadview() was changed in 9b1c939370 to check the file open result.
If user doesn't care about failure to open, using :silent! instead of
:silent is a reasonable, conventional approach.
Closes#3196
Problem: It is not possible to use plugins in an "after" directory to tune
the behavior of a package.
Solution: First load plugins from non-after directories, then packages and
finally plugins in after directories.
Reset 'loadplugins' before executing --cmd arguments.
66459b7c98
vim-patch:7.4.2172
vim-patch:7.4.2169
vim-patch:7.4.2177
vim-patch:7.4.2178
vim-patch:7.4.2184
vim-patch:8.0.0050
vim-patch:8.0.0105
vim-patch:8.0.0400
vim-patch:8.0.0405
Closes#6034
Do this on all systems, so that portable builds work everywhere. This
allows us to ship archives with this folder structure:
bin/nvim
share/nvim/runtime
then ./bin/nvim works without the user needing to explicitly set VIMRUNTIME.
`deprecated.txt` is a place for deprecated tags to live.
- Encourages aggressive documentation of deprecations without cluttering
the main help files.
- Provides a single browsable reference of all deprecations.
Other changes:
- Move tags to doc/vim_diff.txt.
- Remove doc/quotes.txt. It has little historical value, except maybe the
Larry Wall quote.
In 3b12bb225a, ":oldfiles" was taught to
behave like Vim's ":browse oldfiles" if ":oldfiles!" was used. However,
this conflates the use of ! for abandoning a modified buffer with
choosing one file out of a list of oldfiles.
Now that ":browse" is supported again, ":browse oldfiles" will allow the
user to select an old file, while still complaining if that would cause
a modified buffer to be abandoned. ":browse oldfiles!" will just
abandon the buffer, as expected.
Updated runtime files.
03413f4416
Ignore changes to
* doc/Makefile, doc/help.txt: Related to Vim's version8 documentation
* doc/gui_x11.txt, doc/todo.txt, doc/vim.1, gvim.desktop, vim.desktop:
Irrelevant to Neovim
* doc/quickref.txt, doc/options.txt: As of yet unported 'emoji'
* doc/tags, syntax/vim.vim: Generated at build time
Updated runtime files.
4f3f668c84
Ignore changes to
* doc/channel.txt: Channel related docs
* doc/tags: Generated at build time
* doc/todo.txt: Irrelevant to Neovim
Update runtime files.
5f148ec0b5
Ignore changes to
* doc/channel.txt, doc/eval.txt: Channel related docs
* doc/tags: Generated at build time
* doc/todo.txt: Irrelevant to Neovim
Update runtime files.
328da0dcb7
Ignore changes to
* doc/channel.txt, doc/eval.txt: Channel related docs
* doc/tags: Generated at build time
* doc/todo.txt: Irrelevant to Neovim
Updated runtime files
dae8d21dd2
Ignore changes to
* doc/eval.txt: Channel related docs
* doc/help.txt, doc/index.txt, doc/os_390.txt: Removal of obsolete features, which
already happened in Neovim
* doc/tags: Generated at build time
* doc/todo.txt, doc/version5.txt: Irrelevant to Neovim
Updated runtime files.
e0fa3742ea
Ignore changes to
* doc/channel.txt: Channel related docs
* doc/netbeans.txt, doc/os_dos.txt, doc/todo.txt: Not relevant to Neovim
* doc/tags: Generated at build time
The previous defaults were including the nvim suffix, causing it to
apear twice in the final paths.
kXDGDataHome and kXDGConfigHome are now set as %LOCALAPPDATA%,
kXDGCacheHome is set as $TEMP.
In Windows there is no distinction between configuration and data
storage, but we don't want to place all files under the same path.
get_xdg_home() now appends a different path suffix for kXDGDataHome.
- Configuration files are saved under %LOCALAPPDATA%\nvim
- Data files are saved under %LOCALAPPDATA%\nvim-data
In regards to Nvim, it's very outdated; for an updated list of such
arguments refer to the manual page or `nvim --help`. In all other
regards, it's of little to no use to end-users.
Note: it looks like viminfo files do not store search direction intentionally.
After reading viminfo file search direction was considered to be “forward”.
Note 2: all files created on earlier Neovim version will automatically receive
“forward” direction.
Fixes#3580
From the documentation itself:
:[range]o[pen] Works like |:visual|: end Ex mode.
{Vi: start editing in open mode}
...
Vim does not support open mode, since it's not really useful. For
those situations where ":open" would start open mode Vim will leave Ex
mode, which allows executing the same commands, but updates the whole
screen instead of only one line.
Part of the reason behind this is to make removing vi_diff.txt easier,
although it's also because :open is not too useful.
Helped-by: @fdinoff
Helped-by: @dsummersl
Helped-by: @mhinz
Helped-by: @justinmk
Note about ~/.local/share/nvim/site used in one usr_\* file: this one talks
about user-local installation of third-party plugins, and
~/.local/share/nvim/site is the proper place for them. Most other files talk
about user own configuration and this is ~/.config.
It is not logical that on UNIX permissions can prevent even writing temporary
file, while on other OS it will first write temporary file and then fail during
rename.
Modifications:
- If file was not written due to write error then writing stops and temporary
file will not be renamed.
- If NeoVim detects that target file is not a ShaDa file then temporary file
will not be renamed.
Notes:
- E136 code greatly changed its meaning: now it is write error and not read
error.
- E195 was removed because shada_read_everything will already do all the
necessary error reporting.
- E886 can be reported by both :rshada and :wshada, but :rshada comes first and
AFAIR it is the only error which is not E575 and can be reported by :rshada.
- Removed mention of many options which don't exist anymore.
- Add new tags for some new options (e.g., -v)
While here, also remove a few X11 references.
This removes all instances of '{not in Vi}', '{Vi: ... }', etc.
We don't care about Vi compatibility, so all of these annotations are
useless in nvim. This also removed the syntax definitions for these
items.
In addition, remove instances of '{only when compiled with +feature}'
adjacent to instances of '{not in Vi}' and friends.
Helped-by: David Bürgin <676c7473@gmail.com>
Helped-by: Felipe Morales <hel.sheep@gmail.com>
closes#2535
Add missing parentheses and whatnot, move dangling comment, etc. Some
specific items worth mentioning:
Fixed some references to non-existent tags, found via `make html`
msgpack_rpc/channel.c:
ELOG already prefixes each line with "error @ ..."
This removes the ability to start nvim via the following aliases in
favor of just using their command line arguments:
ex vim -e
exim vim -E
view vim -R
gvim vim -g
gex vim -eg
gview vim -Rg
rvim vim -Z
rview vim -RZ
rgvim vim -gZ
rgview vim -RgZ
This also removes Vi mode (-v) for consistency. From ':help -v':
-v Start Ex in Vi mode. Only makes a difference when the
executable is called "ex" or "gvim". For gvim the GUI is not
started if possible.
refs #1045#1051
This was enabled by default a while ago (#1051), and has apparently not
created any issues. The amount of actual code related to it is tiny, so
it has been removed.
Notes regarding the removal of specific items:
- Aztec C: only on the Amiga.
- mch_check_win(): doesn't exist anymore.
- Comment in ex_cmds.c: It seems the context for this comment was
removed, but the comment was inadvertantly left alone.
Closes https://github.com/neovim/docs/pull/26
Also added stubs for 'cryptmethod' and 'key', and placeholders for
explanation regarding removal of crypto functionality.
Vim runtime files based on 7.4.384 / hg changeset 7090d7f160f7
Excluding:
Amiga icons (*.info, icons/)
doc/hangulin.txt
tutor/
spell/
lang/ (only used for menu translations)
macros/maze/, macros/hanoi/, macros/life/, macros/urm/
These were used to test vi compatibility.
termcap
"Demonstration of a termcap file (for the Amiga and Archimedes)"
Helped-by: Rich Wareham <rjw57@cam.ac.uk>
Helped-by: John <john.schmidt.h@gmail.com>
Helped-by: Yann <yann@yann-salaun.com>
Helped-by: Christophe Badoit <c.badoit@lesiteimmo.com>
Helped-by: drasill <github@tof2k.com>
Helped-by: Tae Sandoval Murgan <taecilla@gmail.com>
Helped-by: Lowe Thiderman <lowe.thiderman@gmail.com>
