Problem: winfixbuf does not allow to re-edit current buffer
(Tim Pope, after v9.1.0147)
Solution: Explicitly allow :e even when 'winfixbuf' is set,
since it just re-loads the current buffer
(Colin Kennedy)
fixes: vim/vim#14237closes: vim/vim#1428665e580bd56
Problem:
LSP basic_finish test modified in #27899 is flaky again after #28030.
Solution:
Run on_setup() immediately after setup using a before_init callback.
Problem: Backspace inserts spaces with virtual text and 'smarttab'.
Solution: Ignore virtual text and wrapping when backspacing.
(zeertzjq)
related: neovim/neovim#28005closes: vim/vim#142960185c77014
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Problem: Cannot use modifiers before :-Ntabmove.
Solution: Check backwards from the command instead of checking from the
start of the command line. Slightly adjust docs to make them
more consistent (zeertzjq).
closes: vim/vim#14289076faac537
Move test cases that are more about treesitter query API rather than
parser API or LanguageTree out of "treesitter/parser_spec", and collect
them in another test suite "treesitter/query_spec".
General refactoring, including:
- Improve whitespace and indentation
- Prefix captures with `@`
- Add more comments on `iter_capture()` tests
- Move `test_query` up closer to the fixture source string
No behavioral changes are made.
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: vim/vim#14275ad38769030
When the edited file is a symlink, the unexpanded file name is needed to
to achieve the same behavior as the autocommand pattern matching in Vim.
Neither args.file nor args.match are guaranteed to be unexpanded, so use
bufname() instead.
Problem: memleak with ex_drop(), NULL dereference
(zeertzjq)
Solution: revert back to ex_rewind(), use curbuf instead of buf
fixes: vim/vim#14246closes: vim/vim#1425185a769d466
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: vim/vim#14219closes: vim/vim#14220978178823b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: complete_info() returns wrong order of items
(after v9.0.2018)
Solution: Revert Patch v9.0.2018
(Girish Palya)
bug fix: complete_info() gives wrong results
1) complete_info() reverses list of items during <c-p>
2) 'selected' item index is wrong during <c-p>
3) number of items returnd can be wrong
Solution:
- Decouple 'cp_number' from 'selected' index since they need not be
correlated
- Do not iterate the list backwards
- Add targeted tests
Regression introduced by 69fb5afb3b
Following are unnecessary commits to patch problems from above:
fef6630166daef8c7437
All the tests from above commits are retained though.
fixes: vim/vim#14204closes: vim/vim#142418950bf7f8b
Remove EMPTY_IF_NULL() as it has been unnecessary since #12673.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Vento files are not recognized.
Solution: Recognize *.vto files as filetype "vento" (wrapperup)
Vento is a templating engine https://vento.js.org/closes: vim/vim#142299f26e5a9bc
Co-authored-by: wrapperup <wrapperup4@gmail.com>
Problem: assertion failure in nvim_create_buf if buflist_new autocommands open
a swapfile when "scratch" is set.
Solution: block autocommands when setting up the buffer; fire them later
instead.
Note that, unlike buflist_new, I don't check if autocommands aborted script
processing; the buffer is already created and configured at that point, so might
as well return the handle anyway.
Rather than repeat try_{start,end} and {un}block_autocmds for each relevant
operation, just do it at the start and near the end. This means that, if
TermResponse fires from unblock_autocmds for whatever reason, it can see the
buffer in an already configured state if we didn't bail due to an error (plus
it's probably a bit cleaner this way).
Problem: Not all standard treesitter groups are documented.
Solution: Document them all (without relying on fallback); add default
link for new `*.builtin` groups to `Special` and `@keyword.type` to
`Structure`. Remove `@markup.environment.*` which only made sense for
LaTeX.
The first describe() block enters terminal mode in before_each(), so
feed_command() at the start of a test case writes it to the terminal
instead of executing it.
Problem:
As mentioned in #23002 on_setup and on_init are run concurrently.
However, in basic_finish tests on_setup must attach the client before
on_init finishes. The other basic_finish test isn't flaky because it
makes an RPC request in on_init.
Solution:
Don't use on_setup in basic_finish tests.
Problem: "NOTE"s, inline Vim script code, and links ending in digits may not be
highlighted correctly within the :Tutor.
Solution: set an explicit value for ":syntax iskeyword" that includes digits. Do
it after ":syntax include"s, so the included syntax/sh.vim doesn't mess with the
value.
Increase screen test width so all text within the conclusion section is visible.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Wrong cursor position when clicking after end of line with
'rightleft', 'virtualedit' and conceal.
Solution: Set values in ScreenCols[] also with SLF_RIGHTLEFT. Also fix
off-by-one cursor position with 'colorcolumn' (zeertzjq).
closes: vim/vim#14218deb2204bff
Problem: Wrong cursor position when clicking after end of line with
'virtualedit', conceal and virtual text.
Solution: Always fill linebuf_vcol[] for the columns to clear.
There is no test for using 'cursorline' in Normal mode in a terminal
buffer, so add a test and fix 'cursorcolumn' remaining when entering
Terminal mode.
Also move synIDattr() tests to ui/highlight_spec.lua.
Problem: Cursor line is unconcealed when pressing 'r' in Normal mode
when 'concealcursor' contains 'n' but not 'i'.
Solution: Don't check conceal when pressing 'r' in Normal mode.
Vim doesn't have this problem because it doesn't call redrawWinline() in
conceal_check_cursor_line() and instead sets a global variable.
Problem: Cursor position wrong when clicking with conceal and wrap.
Solution: Use the virtual column of the last char for ScreenCols[] in
boguscols. Remove use of MAXCOL in ScreenCols[]. Rename
third argument of wlv_screen_line() to "clear_end" as that's
clearer what it does (zeertzjq).
related: 14192
closes: vim/vim#14200d0c1b7723f
Rename win_put_linebuf() to wlv_put_linebuf().
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
Problem: Can define function with invalid name inside 'formatexpr'.
Solution: Use goto instead of checking for did_emsg later.
(zeertzjq)
closes: vim/vim#142096a04bf5ee5
Problem: Wrong display or screenpos() result when toggling diff mode.
Solution: Reset w_skipcol when disabling 'wrap'. Reset w_leftcol when
enabling 'wrap' (zeertzjq).
fixes: vim/vim#14210closes: vim/vim#142119e7f1fc2f1
As this message is literally drawn on top of the EOB area of the first
window, the simple solution is to just draw the message on top of the
grid of the first window.
We still want #24764 (msg_intro event) but now only for ext_messages.
Problem: The ext_cmdline cursor position on the screen seems to rely on
an implicit assumption that the event listener implements a
cmdline window that is made the current window which is
problematic (e.g. breaks 'incsearch' in the actual current
window).
Solution: Remove this assumption and allow nvim_win_set_cursor() to move
the cursor on the screen to a non-current window (previous
commit).
Problem: Cursor position set by nvim_win_set_cursor() is not reflected
on the screen when followed by a blocking call like getchar().
Solution: Immediately update the cursor position on the grid.
Problem: no overflow check for string formatting
Solution: Check message formatting function for overflow.
(Chris van Willegen)
closes: vim/vim#13799c35fc03dbd
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: vim/vim#14197010e1539d6
Problem:
CursorColumn highlight behavior is inconsistent with 'virtualedit' set:
- If cursor is on the text, CursorColumn is not shown.
- If cursor is after end of line, CursorColumn is shown.
Solution:
Don't shown CursorColumn on current line if cursor is after end of line.
Vim doesn't have this problem because in most cases it uses the code
path for drawing buffer text when CursorColumn highlight is needed.
Instead of randomly disappearing because some random event might have
caused mid_start or bot_scroll_start to randomly take a low value, treat
intro message as a _first class stateful_ thing.
This means that intro message will kept being _redrawn_ as long as we
are in the state it should be shown. This also includes screen resizes.
you will not lose the intro message because there was a delay in
detecting terminal features.
Problem: Coverity reports dead code.
Solution: Remove the dead code. Also fix a mistake in ml_get_pos_len()
and update some comments (zeertzjq).
closes: vim/vim#141898c55d60658
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: vim/vim#14190253ff4dece
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: vim/vim#1419221b0a3df8c
Problem: E1513 might be confusing
(Christoph Thoma)
Solution: reword error message, fix test to not
depend on the actual message
fixes: vim/vim#141890a32b8854b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: vim/vim#14191
Nvim: don't reuse "wp" for "topleft" in winframe_remove, so the change
integrates better with the call to winframe_find_altwin before it.
5866bc3a0f
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: small improvements can be made to split-move related
functions.
Solution: apply them (Sean Dewar):
Some of these changes were already applied to Nvim.
Here are the ones which were missing:
- Improve some doc comments (frame_flatten should still work for non-current
tabpages, despite the topframe check, which looks benign, though I'm unsure if
it's still needed; see vim/vim#2467).
- f_win_splitmove should check_split_disallowed on wp, not targetwin, as that's
what win_splitmove checks (though it's probably unnecessary to check
b_locked_split at all; see vim/vim#14109, which I hope to get around to
finishing at some point).
- Apply the winframe_restore comment changes, and remove win_comp_pos from after
winframe_restore in win_splitmove, as it shouldn't be necessary (no need to
remove it from nvim_win_set_config too, as it was already omitted).
Move win_append after winframe_restore in win_splitmove to match Vim.
closes: vim/vim#141855cac1a9bee
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in vim/vim#14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: vim/vim#14047closes: vim/vim#14186d64801e913
Problem: current window number returned by tabpagewinnr may be outdated
when called from win_execute for the original tabpage.
Solution: update the original tabpage's tp_curwin in switch_win; use
{un}use_tabpage instead. Don't do it in restore_win to ensure
tp_curwin of the temporarily visited tabpage is unchanged from
switch_win visiting it, as before. (Sean Dewar)
Maybe restore_win should only restore tp_curwin if
`curtab == switchwin->sw_curtab`, in case the user changed tabpages from within
win_execute, but not doing that is consistent with the old behaviour.
related: vim/vim#14186e101028a5c
Tree-sitter queries can add URLs to a capture using the `#set!`
directive, e.g.
(inline_link
(link_text) @text.reference
(link_destination) @text.uri
(#set! @text.reference "url" @text.uri))
The pattern above is included by default in the `markdown_inline`
highlight query so that users with supporting terminals will see
hyperlinks. For now, this creates a hyperlink for *all* Markdown URLs of
the pattern [link text](link url), even if `link url` does not contain
a valid protocol (e.g. if `link url` is a path to a file). We may wish to
change this in the future to only linkify when the URL has a valid
protocol scheme, but for now we delegate handling this to the terminal
emulator.
In order to support directives which reference other nodes, the
highlighter must be updated to use `iter_matches` rather than
`iter_captures`. The former provides the `match` table which maps
capture IDs to nodes. However, this has its own challenges:
- `iter_matches` does not guarantee the order in which patterns are
iterated matches the order in the query file. So we must enforce
ordering manually using "subpriorities" (#27131). The pattern index of
each match dictates the extmark's subpriority.
- When injections are used, the highlighter contains multiple trees. The
pattern indices of each tree must be offset relative to the maximum
pattern index from all previous trees to ensure that extmarks appear
in the correct order.
- The `iter_captures` implementation currently has a bug where the
"match" table is only returned for the first capture within a pattern
(see #27274). This bug means that `#set!` directives in a query
apply only to the first capture within a pattern. Unfortunately, many
queries in the wild have come to depend on this behavior.
`iter_matches` does not share this flaw, so switching to
`iter_matches` exposed bugs in existing highlight queries. These
queries have been updated in this repo, but may still need to be
updated by users. The `#set!` directive applies to the _entire_ query
pattern when used without a capture argument. To make `#set!`
apply only to a single capture, the capture must be given as an
argument.
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: vim/vim#1417749ffb6b428
Problem: Internal error with blockwise getregion() in another buffer
Solution: Also change curwin->w_buffer when changing curbuf (zeertzjq)
closes: vim/vim#141795406eb8722
Problem: Text properties are wrong after "cc". (Axel Forsman)
Solution: Pass the deleted byte count to inserted_bytes(). (closesvim/vim#10412,
closesvim/vim#7737, closesvim/vim#5763)
d0b1a09f44
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Arbitrary restriction on 'cmdheight' with ext_messages.
The 'cmdheight'-area may be desirable for the replacing
cmdline.
Solution: Allow non-zero 'cmdheight' with ext_messages.
Problem: may not be clear why failing to split causes an ":Xdo" command
to abort if 'wfb' is set.
Solution: do not return immediately if win_split fails, so E1513 is
still given. Expect both errors in the test. Also fix tests to
pass CI.
(Sean Dewar)
closes: vim/vim#14152769eb2d0c3
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Coverity complains about ignoring return value of win_split()
(after v9.1.150)
Solution: Check if win_split() failed, add winfixbuf.res to Makefile
af7ae81600
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: several minor 'winfixbuf' issues exist, mostly relating to the
quickfix list
Solution: address them and adjust tests. Retab and reflow a few things too.
(Sean Dewar)
Things touched include:
- Replace the semsgs with gettext'd emsgs.
- Handle window switching in ex_listdo properly, so curbuf and curwin
are kept in-sync and trigger autocommands; handle those properly.
- Don't change the list entry index in qf_jump_edit_buffer if we fail
due to 'wfb' (achieved by returning FAIL; QF_ABORT should only be used
if the list was changed).
- Make qf_jump_edit_buffer actually switch to prevwin when using `:cXX`
commands **outside** of the list window if 'wfb' is set in curwin.
Handle autocommands properly in case they mess with the list.
NOTE: previously, it seemed to split if 'wfb' was set, but do nothing
and fail if prevwin is *valid*. This behaviour seemed strange, and maybe
unintentional? Now it aligns more with what's described for the `:cXX`
commands in the original PR description when used outside a list window,
I think.
- In both functions, only consider prevwin if 'wfb' isn't set for it;
fallback to splitting otherwise.
- Use win_split to split. Not sure if there was a specific reason for
using ex_splitview. win_split is simpler and respects modifiers like
:vertical that may have been used. Plus, its return value can be checked
for setting opened_window in qf code (technically win_split_ins autocmds
could immediately close it or change windows, in which the qf code might
close some other window on failure; it's already the case elsewhere,
though).
closes: vim/vim#141424bb505e28c
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: qf_goto_win_with_qfl_file may check if prevwin has 'winfixbuf'
set without checking if it's valid first.
Solution: Reverse the condition. Add a test, a modeline, and a missing
CheckFeature. (Searn Dewar)
closes: vim/vim#141405131f224da
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Internal error or crash when passing invalid position to
getregion().
Solution: Give an error for invalid position (zeertzjq).
closes: vim/vim#1417226dd09ad5e
Problem: too many STRLEN calls when getting a memline
Solution: Optimize calls to STRLEN(), add a few functions in memline.c
that return the byte length instead of relying on STRLEN()
(John Marriott)
closes: vim/vim#1405202d7a6c6cf
Cherry-pick line break changes from patch 8.1.0226.
Cherry-pick ml_line_len from patch 8.1.0579.
Cherry-pick test_comments.vim change from patch 9.1.0153.
Co-authored-by: John Marriott <basilisk@internode.on.net>
This reverts PR #27793.
On second thought, this solution may still crash, because it can leave a
window with a NULL buffer if there are autocommand windows or if closing
a floating window fails. It also makes close_last_window_tabpage() more
complicated, so revert it.
Problem: Crash in WinClosed after BufUnload closes other windows
Solution: Don't trigger WinClosed if the buffer is NULL (zeertzjq)
Now win_close_othertab() doesn't trigger any autocommands if the buffer
is NULL, so remove the autocmd blocking above (which was added not long
ago in patch v9.0.0550) for consistency.
Also remove an unreachable close_last_window_tabpage() above:
- It is only reached if only_one_window() returns TRUE and last_window()
returns FALSE.
- If only_one_window() returns TRUE, there is only one tabpage.
- If there is only one tabpage and last_window() returns FALSE, the
one_window() in last_window() must return FALSE, and the ONE_WINDOW
in close_last_window_tabpage() must also be FALSE.
- So close_last_window_tabpage() doesn't do anything and returns FALSE.
Then the curtab != prev_curtab check also doesn't make much sense, and
the only_one_window() can be replaced with a check for popup and a call
to last_window() since this is a stricter check than only_one_window().
closes: vim/vim#14166b2ec0da080
Problem: expand() removes a slash after an environment variable that
ends with a colon on Windows.
Solution: Check the correct char for a colon (zeertzjq)
closes: vim/vim#14161
Note: Vim still removes the path-separator at the end, if another path separator
follows directly after it, e.g. on:
```
echo $FOO='/usr/'
echo expand('$FOO/bar') == '/usr/bar'
```
see:
,----[ misc1.c:1630 ]
| // if var[] ends in a path separator and tail[] starts
| // with it, skip a character
| if (after_pathsep(dst, dst + c)
| #if defined(BACKSLASH_IN_FILENAME) || defined(AMIGA)
| && (dst == save_dst || dst[-1] != ':')
| #endif
| && vim_ispathsep(*tail))
| ++tail;
`----
13a014452a
Cherry-pick test_expand.vim change from patch 9.0.1257.
Problem: Crash on exit with EXITFREE and using win_execute().
Solution: Also save and restore tp_topframe. (issue vim/vim#9374)
dab17a0689
Couldn't repro the crash in the test, but I only care about this patch so
switch_win sets topframe properly for win_split_ins in nvim_open_win and
nvim_win_set_config.
Add a test using nvim_win_call and :wincmd, as I couldn't repro the issue via
nvim_open_win or nvim_win_set_config (though it's clear they're affected by this
patch).
That said, at that point, could just use {un}use_tabpage inside switch_win
instead, which also updates tp_curwin (though maybe continue to not set it in
restore_win). That would also fix possible inconsistent behaviour such as:
:call win_execute(w, "let curwin_nr1 = tabpagewinnr(1)")
:let curwin_nr2 = tabpagewinnr(1)
Where it's possible for curwin_nr1 != curwin_nr2 if these commands are run from
the 1st tabpage, but window "w" is in the 2nd (as the 1st tabpage's tp_curwin
may still be invalid). I'll probably PR a fix for that later in Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: nvim_win_set_config does not update the tp_curwin of win's original
tabpage when moving it to another.
Solution: update it if win was the tp_curwin. Add a test.
Problem: illegal memory access when completing with invalid bytes.
Solution: Avoid going over the end of the completion text.
vim/vim@4b28ba3
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem Description: In ex_mode, the default_grid.chars are not allocated, and subsequently,
the w_grid.target in curwin is not allocated to default_grid in update_screen. This leads to
a null pointer crash when the completion function is executed in ex_mode.
Solution: Set full_screen when in ex_mode to ensure that default_grid is allocated.
Problem: :close may cause Nvim to quit if an autocommand triggered when
closing the buffer closes all other non-floating windows and
there are floating windows.
Solution: Correct the check for the only non-floating window.
Its corresponding test in Vim is in test_popupwin.win, so having it in
the middle of test_window_cmd.vim is strange, and it is now covered by
tests in ui/float_spec.lua anyway.
Problem: nvim_win_set_config does not update statuslines after removing a split.
Solution: call last_status.
Didn't realize this was missing in the original nvim_win_set_config for splits
PR.
As it can only be done for the current tabpage, do it if win_tp == curtab;
enter_tabpage will eventually call last_status anyway when the user enters
another tabpage.
Problem: there are new ways to escape textlock or break the cmdwin in
nvim_win_set_config and nvim_tabpage_set_win.
Solution: fix them. Use win_goto to check it in nvim_tabpage_set_win and use the
try_start/end pattern like with similar functions such as nvim_set_current_win
(which uses the existing msg_list, if set).
Careful not to use `wp->handle` when printing the window ID in the error message
for nvim_tabpage_set_win, as win_goto autocommands may have freed the window.
On a related note, I have a feeling some API functions ought to be checking
curbuf_locked...
Problem: nvim_win_set_config does not handle failure in win_split_ins properly
yet, which can cause all sorts of issues. Also nvim_open_win and
nvim_win_set_config do not set the error message to the one from win_split_ins.
Solution: handle failure by undoing winframe_remove, like in win_splitmove.
Make sure autocommands from switching to the altwin fire within a valid window,
and ensure they don't screw things up. Set the error message to that of
win_split_ins, if any.
Also change a few other small things, including:
- adjust win_append to take a tabpage_T * argument, which is more consistent
with win_remove (and also allows us to undo a call to win_remove).
- allow winframe_restore to restore window positions. Useful if `wp` was in a
different tabpage, as a call to win_comp_pos (which only works for the current
tabpage) after winframe_restore should no longer be needed.
Though enter_tabpage calls win_comp_pos anyway, this has the advantage of
ensuring w_winrow/col remains accurate even before entering the tabpage
(useful for stuff like win_screenpos, if used on a window in another tabpage).
(This change should probably also be PR'd to Vim later, even though it doesn't
use winframe_restore for a `wp` in a different tabpage yet).
Problem: heap-use-after-free in win_splitmove if Enter/Leave
autocommands from win_split_ins immediately closes "wp".
Solution: check that "wp" is valid after win_split_ins.
(Sean Dewar)
abf7030a5c
Problem: win_gotoid() checks for textlock and other things when switching
to a window that is already current (after v9.1.0119)
Solution: return early with success when attempting to switch to curwin
(Sean Dewar)
2a65e73944
Problem: infinite loop in win_update with 'smoothscroll' set when
window width is equal to textoff, or signed integer overflow
if smaller.
Solution: don't revalidate wp->w_skipcol in that case, as no buffer text
is being shown. (Sean Dewar)
02fcae02a9
Test_window_split_no_room changes were already cherry-picked earlier.
Problem: can switch windows while textlocked via f_win_gotoid and
f_win_splitmove (which also allows switching in the cmdwin).
Solution: Check text_or_buf_locked in f_win_splitmove()
(Sean Dewar)
While at it, call text_or_buf_locked() in f_win_gotoid() instead of testing for
cmdwin_type() (which text_buf_locked() does and in addition will also verify
that the buffer is not locked).
f865895c87
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
704966c254
Adjust winframe_restore to account for Nvim's horizontal separators when the
global statusline is in use. Add a test.
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
96cc4aef3d
Partial as WinNewPre has not been ported yet (it currently has problems anyway).
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
0fd44a5ad8
Omit WSP_FORCE_ROOM, as it's not needed for Nvim's autocmd window, which is
floating. Shouldn't be difficult to port later if it's used for anything else.
Make win_splitmove continue working for turning floating windows into splits.
Move the logic for "unfloating" a float to win_split_ins; unlike splits, no
changes to the window layout are needed before calling it, as floats take no
room in the window layout and cannot affect the e_noroom check.
Add missing tp_curwin-fixing logic for turning external windows into splits, and
add a test.
NOTE: there are other issues with the way "tabpage independence" is implemented
for external windows; namely, some things assume that tp_curwin is indeed a
window within that tabpage, and as such, functions like tabpage_winnr and
nvim_tabpage_get_win currently don't always work for external windows (with the
latter aborting!)
Use last_status over frame_add_statusline, as Nvim's last_status already does
this for all windows in the current tabpage. Adjust restore_full_snapshot_rec to
handle this.
This "restore everything" approach is changed in a future commit anyway, so only
ensure it's robust enough to just pass tests.
Keep check_split_disallowed's current doc comment, as it's actually a bit more
accurate here. (I should probably PR Vim to use this one)
Allow f_win_splitmove to move a floating "wp" into a split; Nvim supports this.
Continue to disallow it from moving the autocommand window into a split (funnily
enough, the check wasn't reachable before, as moving a float was disallowed),
but now return -1 in that case (win_splitmove also returns FAIL for this, but
handling it in f_win_splitmove avoids us needing to switch windows first).
Cherry-pick Test_window_split_no_room fix from v9.1.0121.
Update nvim_win_set_config to handle win_split_ins failure in later commits.
Problem: nvim_open_win blocking all win_set_buf autocommands when !enter &&
!noautocmd is too aggressive.
Solution: temporarily block WinEnter/Leave and BufEnter/Leave events when
setting the buffer. Delegate the firing of BufWinEnter back to win_set_buf,
which also has the advantage of keeping the timing consistent (e.g: before the
epilogue in enter_buffer, which also handles restoring the cursor position if
autocommands didn't change it, among other things). Reword the documentation for
noautocmd a bit.
I pondered modifying do_buffer and callees to allow for BufEnter/Leave being
conditionally disabled, but it seems too invasive (and potentially error-prone,
especially if new code paths to BufEnter/Leave are added in the future).
Unfortunately, doing this has the drawback of blocking ALL such events for the
duration, which also means blocking unrelated such events; like if window
switching occurs in a ++nested autocmd fired by win_set_buf. If this turns out
to be a problem in practice, a different solution specialized for nvim_open_win
could be considered. :-)
Problem: currently, for splits, nvim_win_set_config accepts win without any of
split or vertical set, which has little effect and seems error-prone.
Solution: require at least one of split or vertical to also be set for splits.
Also, update nvim_win_set_config docs, as it's no longer limited to just
floating and external windows.
Problem: splitting is disallowed in some cases to prevent the window layout
changes while a window is closing, but it's not checked for.
Solution: check for this, and set the API error message directly.
(Also sneak in a change to tui.c that got lost from #27352; it's a char* buf,
and the memset is assuming one byte each anyway)
Problem: WinNew and win_enter autocommands can delete the target buffer to
switch to, causing a heap-use-after-free.
Solution: store a bufref to the buffer, check it before attempting to switch.
Problem: if switch_win{_noblock} fails to restore the old curwin after WinNew
(e.g: it was closed), wp will become the new curwin, but win_set_buf enter
events would still be blocked if !enter && !noautocmd.
Solution: fire them, as we've actually entered the new window.
Note: there's a problem of switch_win{_noblock} failing to restore the old
curwin, leaving us in wp without triggering WinEnter/WinLeave, but this affects
all callers of switch_win{_noblock} anyways. (It's also not clear how WinLeave
can be called if the old curwin was closed already).
Problem: BufWinEnter is not fired when not entering a new window, even when a
different buffer is specified and buffer-related autocommands are unblocked
(!noautocmd).
Solution: fire it in the context of the new window and buffer. Do not do it if
the buffer is unchanged, like :{s}buffer.
Be wary of autocommands! For example, it's possible for nvim_win_set_config to
be used in an autocommand to move a window to a different tabpage (in contrast,
things like wincmd T actually create a *new* window, so it may not have been
possible before, meaning other parts of Nvim could assume windows can't do
this... I'd be especially cautious of logic that restores curwin and curtab
without checking if curwin is still valid in curtab, if any such logic exists).
Also, bail early from win_set_buf if setting the temp curwin fails; this
shouldn't be possible, as the callers check that wp is valid, but in case that's
not true, win_set_buf will no longer continue setting a buffer for the wrong
window.
Note that pum_create_float_preview also uses win_set_buf, but from a glance,
doesn't look like it properly checks for autocmds screwing things up (win_enter,
nvim_create_buf...). I haven't addressed that here.
Also adds some test coverage for nvim_open_win autocommands.
Closes#27121.
Problem: win_set_config should have the observable effect of moving an existing
window to another place, but instead fires autocommands as if a new window was
created and entered (and does not fire autocommands reflecting a "return" to the
original window).
Solution: do not fire win_enter-related autocommands when splitting the window,
but continue to fire them when entering the window that fills the new space when
moving a window to a different tabpage, as the new curwin changes.
Also, remove "++once" from the WinEnter autocmd in the other test, as omitting
it also crashed Nvim before this fix.
Problem: win_enter autocommands can close new_curwin, crashing if it was the
last window in its tabpage after removing win, or can close parent, crashing
when attempting to split it later.
Solution: remove win first, check that parent is valid after win_enter.
NOTE: This isn't actually quite right, as this means win is not in the window
list or even has a frame when triggering enter autocommands (so it's not
considered valid in the tabpage). This is addressed in later commits.
Problem: 'shortmess' "F" flag doesn't work properly with 'autoread'
(after 9.1.0154)
Solution: Hide the file info message instead of the warning dialog
(zeertzjq)
closes: vim/vim#14159closes: vim/vim#141588a01744c56
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: vim/vim#141540df8f93bda
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: vim/vim#1413184bf6e658d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Text is not redrawn with 'relativenumber' when only the 'statuscolumn' is redrawn after inserted lines.
Solution: Force a full redraw if statuscolumn width changed.
Problem:
`vim.lsp.util.rename()` deletes the buffers that are affected by
renaming. This has undesireable side effects. For example, when renaming
a directory, all buffers under that directory are deleted and windows
displaying those buffers are closed. Also, buffer options may change
after renaming.
Solution:
Rename the buffers with :saveas.
An alternative approach is to record all the relevant states and restore
it after renaming, but that seems to be more complex. In fact, the older
version was attempting to restore the states but only partially and
incorrectly.
- Added `@inlinedoc` so single use Lua types can be inlined into the
functions docs. E.g.
```lua
--- @class myopts
--- @inlinedoc
---
--- Documentation for some field
--- @field somefield integer
--- @param opts myOpts
function foo(opts)
end
```
Will be rendered as
```
foo(opts)
Parameters:
- {opts} (table) Object with the fields:
- somefield (integer) Documentation
for some field
```
- Marked many classes with with `@nodoc` or `(private)`.
We can eventually introduce these when we want to.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
Problem: v:echospace wrong after setting invalid value to 'showcmdloc'.
Solution: Only call comp_col() if value is valid.
(zeertzjq)
closes: vim/vim#14119c27fcf4857
Problem: Floats are arbitrarily positioned at 1 row above screen size.
Solution: Position at 1 row above 'cmdheight', only if window is hidden behind the message area.
Problem: the amount of available space (v:echospace) on the command
line is not correct when showcmdloc is drawn into the
statusline or tabline.
Solution: only add SHOWCMD_COLS to the shown command column when
'showcmdloc' is set to last (Sam-programs)
closes: vim/vim#14108062141b1a7
Co-authored-by: Sam-programs <130783534+Sam-programs@users.noreply.github.com>
Problem: getregion() needs more tests
Solution: Run the getregion() test in both the legacy and Vim9 contexts
(Yegappan Lakshmanan)
closes: vim/vim#141144d55c54e30
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: [security]: autocmd cause use-after-free in set_curbuf()
(kawarimidoll)
Solution: check side-effect of BufLeave autocommand, when the number
of windows changed, close windows containing buffers that will
be wiped, if curbuf changed unexpectedly make sure b_nwindows
is decremented otherwise it cannot be wiped
set_curbuf() already makes some efforts to ensure the BufLeave
autocommands do not cause issues. However there are still 2 issues
that are not taken care of:
1) If a BufLeave autocommand opens a new window containing the same
buffer as that is going got be closed in close_buffer() a bit later,
we suddenly have another window open, containing a free'd buffer. So we
must check if the number of windows changed and if it does (and the
current buffer is going to be wiped (according to the 'bufhidden'
setting), let's immediately close all windows containing the current
buffer using close_windows()
2) If a BufLeave autocommand changes our current buffer (displays it in
the current window), buf->b_nwindow will be incremented. As part of
set_curbuf() we will however enter another buffer soon, which means, the
newly created curbuf will have b_nwindows still have set, even so the
buffer is no longer displayed in a window. This causes later problems,
because it will no longer be possible to wipe such a buffer. So just
before entering the final buffer, check if the curbuf changed when
calling the BufLeave autocommand and if it does (and curbuf is still
valid), decrement curbuf->b_nwindows.
Both issues can be verified using the provided test (however the second
issue only because such an impacted buffer won't be wiped, causing
futher issues in later tests).
fixes: vim/vim#13839closes: vim/vim#1410455f8bba73b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: vim/vim#1409019b718828d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Put in Visual mode wrong if it replaces fold marker.
Solution: Temporarily disable folding during put in Visual mode.
(zeertzjq)
fixes: vim/vim#14097closes: vim/vim#141004e141c66b9
Previously rename would unconditionally read the to-be-renamed file from the
disk and write it to the disk. This is redundant in some cases
If the file is not already loaded, it's not attached to lsp client, so nvim
doesn't need to care about this file.
If the file is loaded but has no change, it doesn't need to be written.
Then we can just load metadata in C as a single msgpack blob. Which also
can be used directly as binarly data, instead of first unpacking all the
functions and ui_events metadata to immediately pack it again, which was
a bit of a silly walk (and one extra usecase of `msgpack_rpc_from_object`
which will get yak shaved in the next PR)
Problem: Some LSP servers return `textDocument/documentLink` responses
containing file URIs with line/column numbers in the fragment.
`vim.uri_to_fname` returns invalid file names for these URIs.
Solution: Remove the URI fragment from file URIs.
Problem:
The documentation flow (`gen_vimdoc.py`) has several issues:
- it's not very versatile
- depends on doxygen
- doesn't work well with Lua code as it requires an awkward filter script to convert it into pseudo-C.
- The intermediate XML files and filters makes it too much like a rube goldberg machine.
Solution:
Re-implement the flow using Lua, LPEG and treesitter.
- `gen_vimdoc.py` is now replaced with `gen_vimdoc.lua` and replicates a portion of the logic.
- `lua2dox.lua` is gone!
- No more XML files.
- Doxygen is now longer used and instead we now use:
- LPEG for comment parsing (see `scripts/luacats_grammar.lua` and `scripts/cdoc_grammar.lua`).
- LPEG for C parsing (see `scripts/cdoc_parser.lua`)
- Lua patterns for Lua parsing (see `scripts/luacats_parser.lua`).
- Treesitter for Markdown parsing (see `scripts/text_utils.lua`).
- The generated `runtime/doc/*.mpack` files have been removed.
- `scripts/gen_eval_files.lua` now instead uses `scripts/cdoc_parser.lua` directly.
- Text wrapping is implemented in `scripts/text_utils.lua` and appears to produce more consistent results (the main contributer to the diff of this change).
Problems:
- Illegal bytes after valid UTF-8 char cause utf_cp_*_off() to fail.
- When stream isn't NUL-terminated, utf_cp_*_off() may go over the end.
Solution: Don't go over end of the char of end of the string.
Functions like file_open_new() and file_open_fd_new() which just is a
wrapper around the real functions but with an extra xmalloc/xfree around
is an anti-pattern. If the caller really needs to allocate a
FileDescriptor as a heap object, it can do that directly.
FileDescriptor by itself is pretty much a pointer, or rather two:
the OS fd index and a pointer to a buffer. So most of the time an extra
pointer layer is just wasteful.
In the case of scriptin[curscript] in getchar.c, curscript used
to mean in practice:
N+1 open scripts when curscript>0
zero or one open scripts when curscript==0
Which means scriptin[0] had to be compared to NULL to disambiguate the
curscript=0 case.
Instead, use curscript==-1 to mean that are no script,
then all pointer comparisons dissappear and we can just use an array of
structs without extra pointers.
With "intermediate" flag, only using minimal timeout is too short and
may lead to failures.
Also remove the fallback timeout in screen:expect_unchanged(), as having
a different fallback timeout than screen:expect() is confusing.
Problem: Insufficient testing for 'delcombine'.
Solution: Add test for both Normal and Insert modes without Arabic.
(zeertzjq)
closes: vim/vim#14086cd3a13e774
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
fixesvim/vim#13894closes: vim/vim#140820dc0bff000
Cherry-pick test_cmdline.vim from patch 9.1.0019 as it already passes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: using "C" and 've=all' set, doesn't include composing chars
when changing a line, keeps the composing chars for whatever
is typed afterwards.
Solution: Use mb_head_off() and mb_ptr2len() instead of mb_tail_off().
(zeertzjq)
closes: vim/vim#14083048761bcd4
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: vim/vim#14076
Internal error when passing mark in another buffer to getregion()
421b597470
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: vim/vim#13998closes: vim/vim#115793f905ab3c4
Cherry-pick changes from patch 9.1.0122, with :echom instead of :echow.
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Jakub Łuczyński <doubleloop@o2.pl>
Currently, highlight.on_yank() does buffer-local highlighting, this PR
makes it window scoped.
Also fix the problem that when yanking in a buffer, moving to another
buffer, and yanking before the original buffer highlight disappears, the
original buffer highlight won't disappear on timeout.
runtime(filetype): Modula-2 files with priority not detected (vim/vim#14055)
Problem: Modula-2 files with a specified priority are not detected.
Solution: Match the priority syntax in module header lines when
performing heuristic content detection.
Disable the :defcompile debug line. This was accidentally left enabled
in commit 68a8947.
ef387c062b
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: Using freed memory with full tag stack and user data
(Konstantin Khlebnikov)
Solution: Clear the user data pointer of the newest entry.
(zeertzjq, Konstantin Khlebnikov)
fixes: neovim/neovim#27498closes: vim/vim#14053c86bff1771
Cherry-pick Test_tag_stack() changes from patch 9.0.0767.
Co-authored-by: Konstantin Khlebnikov <koct9i@gmail.com>
Problem: Setting some options changes curswant unnecessarily.
Solution: Add a P_HLONLY flag that prevents changing curswant.
(zeertzjq)
closes: vim/vim#14044fcaed6a70f
Query patterns can contain quantifiers (e.g. (foo)+ @bar), so a single
capture can map to multiple nodes. The iter_matches API can not handle
this situation because the match table incorrectly maps capture indices
to a single node instead of to an array of nodes.
The match table should be updated to map capture indices to an array of
nodes. However, this is a massively breaking change, so must be done
with a proper deprecation period.
`iter_matches`, `add_predicate` and `add_directive` must opt-in to the
correct behavior for backward compatibility. This is done with a new
"all" option. This option will become the default and removed after the
0.10 release.
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Co-authored-by: MDeiml <matthias@deiml.net>
Co-authored-by: Gregory Anders <greg@gpanders.com>
