Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
bd28cae1f1
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
b9f5b95b7b
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: vim/vim#14197010e1539d6
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: vim/vim#14190253ff4dece
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: vim/vim#1419221b0a3df8c
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: vim/vim#1417749ffb6b428
Problem: When the quickfix buffer has been modified an autocommand
may invalidate the undo stack (kawarimidoll)
Solution: When clearing the quickfix buffer, also wipe the undo stack
fixes: vim/vim#13905closes: vim/vim#13928f0d3d4a426
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Visual highlight hard to read with 'termguicolors'
(Maxim Kim)
Solution: Set Visual GUI foreground to black (with background=light)
and lightgrey (with background=dark)
(Maxim Kim)
fixes: vim/vim#14024closes: vim/vim#1402534e4a05d02
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: upper-case of ß should be U+1E9E (CAPITAL LETTER SHARP S)
(fenuks)
Solution: Make gU, ~ and g~ convert the U+00DF LATIN SMALL LETTER SHARP S (ß)
to U+1E9E LATIN CAPITAL LETTER SHARP S (ẞ), update tests
(glepnir)
This is part of Unicode 5.1.0 from April 2008, so should be fairly safe
to use now and since 2017 is part of the German standard orthography,
according to Wikipedia:
https://en.wikipedia.org/wiki/Capital_%E1%BA%9E#cite_note-auto-12
There is however one exception: UnicodeData.txt for U+00DF
LATIN SMALL LETTER SHARP S does NOT define U+1E9E LATIN CAPITAL LETTER
SHARP S as its upper case version. Therefore, toupper() won't be able
to convert from lower sharp s to upper case sharp s (the other way
around however works, since U+00DF is considered the lower case
character of U+1E9E and therefore tolower() works correctly for the
upper case version).
fixes: vim/vim#5573closes: vim/vim#14018bd1232a1fa
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Visual hl wrong when it ends before multibyte 'showbreak'.
(lacygoil)
Solution: Use vcol_sbr instead of adding n_extra.
(zeertzjq)
fixes: vim/vim#11272closes: vim/vim#13996df23d7f4bd
Bug doesn't apply to Nvim.
Problem: Redrawing can be improved when inserting/deleting lines with 'number'.
Solution: Only redraw the number column of lines below changed lines.
Add a test as this wasn't previously tested.
(zeertzjq)
closes: vim/vim#13985ae07ebc04b
Problem: Modifying a hidden buffer still interferes with prompt buffer
mode changes.
Solution: Save and restore b_prompt_insert.
(zeertzjq)
closes: vim/vim#13875
Modifying hidden buffer still interferes with prompt buffer mode changes
f267847017
Problem: Insert mode not stopped if an autocommand modifies a hidden
buffer while closing a prompt buffer.
Solution: Don't set b_prompt_insert if stop_insert_mode is already set.
(zeertzjq)
closes: vim/vim#1387296958366ad
Problem: Visual selection isn't drawn with 'breakindent' when the line
doesn't fit in the window (Jaehwang Jung)
Solution: Adjust wlv->fromcol also for 'breakindent' (zeertzjq)
closes: vim/vim#13767closes: vim/vim#1376823627722d3
This is the command invoked repeatedly to make the changes:
:%s/^\(.*\)|\%(\*\(\d\+\)\)\?$\n\1|\%(\*\(\d\+\)\)\?$/\=submatch(1)..'|*'..(max([str2nr(submatch(2)),1])+max([str2nr(submatch(3)),1]))/g
Problem: Wrong scrolling in Insert mode with 'smoothscroll' at the
bottom of the window.
Solution: Don't use set_topline() when 'smoothscroll' is set.
fixes: vim/vim#13612closes: vim/vim#136135b4d1fcbf0
Problem: [security]: stack-buffer-overflow in option callback functions
Solution: pass size of errbuf down the call stack, use snprintf()
instead of sprintf()
We pass the error buffer down to the option callback functions, but in
some parts of the code, we simply use sprintf(buf) to write into the error
buffer, which can overflow.
So let's pass down the length of the error buffer and use sprintf(buf, size)
instead.
Reported by @henices, thanks!
b39b240c38
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in win-enter
Solution: validate window pointer before calling win_enter()
win_goto() may stop visual mode, if it is active. However, this may in
turn trigger the ModeChanged autocommand, which could potentially free
the wp pointer which was valid before now became stale and points to now
freed memory.
So before calling win_enter(), let's verify one more time, that the
wp pointer still points to a valid window structure.
Reported by @henices, thanks!
eec0c2b3a4
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: File info disappears immediately when 'cmdheight' has just
decreased due to switching tabpage and 'shortmess' doesn't
contain 'o' or 'O'.
Solution: Make sure msg_row isn't smaller than cmdline_row.
fixes: vim/vim#13560closes: vim/vim#1356140ed6711bd
Problem: buffer-overflow in trunc_string()
Solution: Add NULL at end of buffer
Currently trunc_string() assumes that when the string is too long,
buf[e-1] will always be writeable. But that assumption may not always be
true. The condition currently looks like this
else if (e + 3 < buflen)
[...]
else
{
// can't fit in the "...", just truncate it
buf[e - 1] = NUL;
}
but this means, we may run into the last else clause with e still being
larger than buflen. So a buffer overflow occurs.
So instead of using `buf[e - 1]`, let's just always
truncate at `buf[buflen - 1]` which should always be writable.
3bd7fa12e1
vim-patch:9.0.2004: Missing test file
Problem: Missing test file
Solution: git-add the file to the repo
closes: vim/vim#13305d4afbdd071
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: FPE in adjust_plines_for_skipcol
Solution: don't divide by zero, return zero
Prevent a floating point exception when calculating w_skipcol (which can
happen with a small window when the number option is set and cpo+=n).
Add a test to verify
cb0b99f067
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: vim/vim#13493closes: vim/vim#135249588666360
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Various things no6 properly tested.
Solution: Add various test cases. (Yegappan Lakshmanan, closesvim/vim#10259)
885de449c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
msg_puts_display was more complex than necessary in nvim, as in
nvim, it no longer talks directly with a terminal.
In particular we don't need to scroll the grid before emiting the last
char. The TUI already takes care of things like that, for terminals
where it matters.
The removes the previous restriction that nvim_buf_set_extmark()
could not be used to highlight arbitrary multi-line regions
The problem can be summarized as follows: let's assume an extmark with a
hl_group is placed covering the region (5,0) to (50,0) Now, consider
what happens if nvim needs to redraw a window covering the lines 20-30.
It needs to be able to ask the marktree what extmarks cover this region,
even if they don't begin or end here.
Therefore the marktree needs to be augmented with the information covers
a point, not just what marks begin or end there. To do this, we augment
each node with a field "intersect" which is a set the ids of the
marks which overlap this node, but only if it is not part of the set of
any parent. This ensures the number of nodes that need to be explicitly
marked grows only logarithmically with the total number of explicitly
nodes (and thus the number of of overlapping marks).
Thus we can quickly iterate all marks which overlaps any query position
by looking up what leaf node contains that position. Then we only need
to consider all "start" marks within that leaf node, and the "intersect"
set of that node and all its parents.
Now, and the major source of complexity is that the tree restructuring
operations (to ensure that each node has T-1 <= size <= 2*T-1) also need
to update these sets. If a full inner node is split in two, one of the
new parents might start to completely overlap some ranges and its ids
will need to be moved from its children's sets to its own set.
Similarly, if two undersized nodes gets joined into one, it might no
longer completely overlap some ranges, and now the children which do
needs to have the have the ids in its set instead. And then there are
the pivots! Yes the pivot operations when a child gets moved from one
parent to another.
Problem: use-after-free in do_ecmd
Solution: Verify oldwin pointer after reset_VIsual()
e1dc9a6275
N/A patches for version.c:
vim-patch:9.0.1841: style: trailing whitespace in ex_cmds.c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: wrong cursor position with 'showbreak' and lcs-eol
Solution: Add size of 'showbreak' before when 'listchars' "eol" is used.
Also fix wrong cursor position with wrapping virtual text on
empty line and 'showbreak'.
closes: vim/vim#128911193951beb
