Problem: assertion failure in nvim_create_buf if buflist_new autocommands open
a swapfile when "scratch" is set.
Solution: block autocommands when setting up the buffer; fire them later
instead.
Note that, unlike buflist_new, I don't check if autocommands aborted script
processing; the buffer is already created and configured at that point, so might
as well return the handle anyway.
Rather than repeat try_{start,end} and {un}block_autocmds for each relevant
operation, just do it at the start and near the end. This means that, if
TermResponse fires from unblock_autocmds for whatever reason, it can see the
buffer in an already configured state if we didn't bail due to an error (plus
it's probably a bit cleaner this way).
The first describe() block enters terminal mode in before_each(), so
feed_command() at the start of a test case writes it to the terminal
instead of executing it.
Problem:
As mentioned in #23002 on_setup and on_init are run concurrently.
However, in basic_finish tests on_setup must attach the client before
on_init finishes. The other basic_finish test isn't flaky because it
makes an RPC request in on_init.
Solution:
Don't use on_setup in basic_finish tests.
Problem: "NOTE"s, inline Vim script code, and links ending in digits may not be
highlighted correctly within the :Tutor.
Solution: set an explicit value for ":syntax iskeyword" that includes digits. Do
it after ":syntax include"s, so the included syntax/sh.vim doesn't mess with the
value.
Increase screen test width so all text within the conclusion section is visible.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Wrong cursor position when clicking after end of line with
'virtualedit', conceal and virtual text.
Solution: Always fill linebuf_vcol[] for the columns to clear.
There is no test for using 'cursorline' in Normal mode in a terminal
buffer, so add a test and fix 'cursorcolumn' remaining when entering
Terminal mode.
Also move synIDattr() tests to ui/highlight_spec.lua.
Problem: Cursor line is unconcealed when pressing 'r' in Normal mode
when 'concealcursor' contains 'n' but not 'i'.
Solution: Don't check conceal when pressing 'r' in Normal mode.
Vim doesn't have this problem because it doesn't call redrawWinline() in
conceal_check_cursor_line() and instead sets a global variable.
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
As this message is literally drawn on top of the EOB area of the first
window, the simple solution is to just draw the message on top of the
grid of the first window.
We still want #24764 (msg_intro event) but now only for ext_messages.
Problem: The ext_cmdline cursor position on the screen seems to rely on
an implicit assumption that the event listener implements a
cmdline window that is made the current window which is
problematic (e.g. breaks 'incsearch' in the actual current
window).
Solution: Remove this assumption and allow nvim_win_set_cursor() to move
the cursor on the screen to a non-current window (previous
commit).
Problem: Cursor position set by nvim_win_set_cursor() is not reflected
on the screen when followed by a blocking call like getchar().
Solution: Immediately update the cursor position on the grid.
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: vim/vim#14197010e1539d6
Problem:
CursorColumn highlight behavior is inconsistent with 'virtualedit' set:
- If cursor is on the text, CursorColumn is not shown.
- If cursor is after end of line, CursorColumn is shown.
Solution:
Don't shown CursorColumn on current line if cursor is after end of line.
Vim doesn't have this problem because in most cases it uses the code
path for drawing buffer text when CursorColumn highlight is needed.
Instead of randomly disappearing because some random event might have
caused mid_start or bot_scroll_start to randomly take a low value, treat
intro message as a _first class stateful_ thing.
This means that intro message will kept being _redrawn_ as long as we
are in the state it should be shown. This also includes screen resizes.
you will not lose the intro message because there was a delay in
detecting terminal features.
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: vim/vim#14190253ff4dece
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: vim/vim#1419221b0a3df8c
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Tree-sitter queries can add URLs to a capture using the `#set!`
directive, e.g.
(inline_link
(link_text) @text.reference
(link_destination) @text.uri
(#set! @text.reference "url" @text.uri))
The pattern above is included by default in the `markdown_inline`
highlight query so that users with supporting terminals will see
hyperlinks. For now, this creates a hyperlink for *all* Markdown URLs of
the pattern [link text](link url), even if `link url` does not contain
a valid protocol (e.g. if `link url` is a path to a file). We may wish to
change this in the future to only linkify when the URL has a valid
protocol scheme, but for now we delegate handling this to the terminal
emulator.
In order to support directives which reference other nodes, the
highlighter must be updated to use `iter_matches` rather than
`iter_captures`. The former provides the `match` table which maps
capture IDs to nodes. However, this has its own challenges:
- `iter_matches` does not guarantee the order in which patterns are
iterated matches the order in the query file. So we must enforce
ordering manually using "subpriorities" (#27131). The pattern index of
each match dictates the extmark's subpriority.
- When injections are used, the highlighter contains multiple trees. The
pattern indices of each tree must be offset relative to the maximum
pattern index from all previous trees to ensure that extmarks appear
in the correct order.
- The `iter_captures` implementation currently has a bug where the
"match" table is only returned for the first capture within a pattern
(see #27274). This bug means that `#set!` directives in a query
apply only to the first capture within a pattern. Unfortunately, many
queries in the wild have come to depend on this behavior.
`iter_matches` does not share this flaw, so switching to
`iter_matches` exposed bugs in existing highlight queries. These
queries have been updated in this repo, but may still need to be
updated by users. The `#set!` directive applies to the _entire_ query
pattern when used without a capture argument. To make `#set!`
apply only to a single capture, the capture must be given as an
argument.
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: vim/vim#1417749ffb6b428
Problem: Text properties are wrong after "cc". (Axel Forsman)
Solution: Pass the deleted byte count to inserted_bytes(). (closesvim/vim#10412,
closesvim/vim#7737, closesvim/vim#5763)
d0b1a09f44
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Arbitrary restriction on 'cmdheight' with ext_messages.
The 'cmdheight'-area may be desirable for the replacing
cmdline.
Solution: Allow non-zero 'cmdheight' with ext_messages.
This reverts PR #27793.
On second thought, this solution may still crash, because it can leave a
window with a NULL buffer if there are autocommand windows or if closing
a floating window fails. It also makes close_last_window_tabpage() more
complicated, so revert it.
Problem: Crash on exit with EXITFREE and using win_execute().
Solution: Also save and restore tp_topframe. (issue vim/vim#9374)
dab17a0689
Couldn't repro the crash in the test, but I only care about this patch so
switch_win sets topframe properly for win_split_ins in nvim_open_win and
nvim_win_set_config.
Add a test using nvim_win_call and :wincmd, as I couldn't repro the issue via
nvim_open_win or nvim_win_set_config (though it's clear they're affected by this
patch).
That said, at that point, could just use {un}use_tabpage inside switch_win
instead, which also updates tp_curwin (though maybe continue to not set it in
restore_win). That would also fix possible inconsistent behaviour such as:
:call win_execute(w, "let curwin_nr1 = tabpagewinnr(1)")
:let curwin_nr2 = tabpagewinnr(1)
Where it's possible for curwin_nr1 != curwin_nr2 if these commands are run from
the 1st tabpage, but window "w" is in the 2nd (as the 1st tabpage's tp_curwin
may still be invalid). I'll probably PR a fix for that later in Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: nvim_win_set_config does not update the tp_curwin of win's original
tabpage when moving it to another.
Solution: update it if win was the tp_curwin. Add a test.
Problem Description: In ex_mode, the default_grid.chars are not allocated, and subsequently,
the w_grid.target in curwin is not allocated to default_grid in update_screen. This leads to
a null pointer crash when the completion function is executed in ex_mode.
Solution: Set full_screen when in ex_mode to ensure that default_grid is allocated.
Problem: :close may cause Nvim to quit if an autocommand triggered when
closing the buffer closes all other non-floating windows and
there are floating windows.
Solution: Correct the check for the only non-floating window.
Problem: nvim_win_set_config does not update statuslines after removing a split.
Solution: call last_status.
Didn't realize this was missing in the original nvim_win_set_config for splits
PR.
As it can only be done for the current tabpage, do it if win_tp == curtab;
enter_tabpage will eventually call last_status anyway when the user enters
another tabpage.
Problem: there are new ways to escape textlock or break the cmdwin in
nvim_win_set_config and nvim_tabpage_set_win.
Solution: fix them. Use win_goto to check it in nvim_tabpage_set_win and use the
try_start/end pattern like with similar functions such as nvim_set_current_win
(which uses the existing msg_list, if set).
Careful not to use `wp->handle` when printing the window ID in the error message
for nvim_tabpage_set_win, as win_goto autocommands may have freed the window.
On a related note, I have a feeling some API functions ought to be checking
curbuf_locked...
Problem: nvim_win_set_config does not handle failure in win_split_ins properly
yet, which can cause all sorts of issues. Also nvim_open_win and
nvim_win_set_config do not set the error message to the one from win_split_ins.
Solution: handle failure by undoing winframe_remove, like in win_splitmove.
Make sure autocommands from switching to the altwin fire within a valid window,
and ensure they don't screw things up. Set the error message to that of
win_split_ins, if any.
Also change a few other small things, including:
- adjust win_append to take a tabpage_T * argument, which is more consistent
with win_remove (and also allows us to undo a call to win_remove).
- allow winframe_restore to restore window positions. Useful if `wp` was in a
different tabpage, as a call to win_comp_pos (which only works for the current
tabpage) after winframe_restore should no longer be needed.
Though enter_tabpage calls win_comp_pos anyway, this has the advantage of
ensuring w_winrow/col remains accurate even before entering the tabpage
(useful for stuff like win_screenpos, if used on a window in another tabpage).
(This change should probably also be PR'd to Vim later, even though it doesn't
use winframe_restore for a `wp` in a different tabpage yet).
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
704966c254
Adjust winframe_restore to account for Nvim's horizontal separators when the
global statusline is in use. Add a test.
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
0fd44a5ad8
Omit WSP_FORCE_ROOM, as it's not needed for Nvim's autocmd window, which is
floating. Shouldn't be difficult to port later if it's used for anything else.
Make win_splitmove continue working for turning floating windows into splits.
Move the logic for "unfloating" a float to win_split_ins; unlike splits, no
changes to the window layout are needed before calling it, as floats take no
room in the window layout and cannot affect the e_noroom check.
Add missing tp_curwin-fixing logic for turning external windows into splits, and
add a test.
NOTE: there are other issues with the way "tabpage independence" is implemented
for external windows; namely, some things assume that tp_curwin is indeed a
window within that tabpage, and as such, functions like tabpage_winnr and
nvim_tabpage_get_win currently don't always work for external windows (with the
latter aborting!)
Use last_status over frame_add_statusline, as Nvim's last_status already does
this for all windows in the current tabpage. Adjust restore_full_snapshot_rec to
handle this.
This "restore everything" approach is changed in a future commit anyway, so only
ensure it's robust enough to just pass tests.
Keep check_split_disallowed's current doc comment, as it's actually a bit more
accurate here. (I should probably PR Vim to use this one)
Allow f_win_splitmove to move a floating "wp" into a split; Nvim supports this.
Continue to disallow it from moving the autocommand window into a split (funnily
enough, the check wasn't reachable before, as moving a float was disallowed),
but now return -1 in that case (win_splitmove also returns FAIL for this, but
handling it in f_win_splitmove avoids us needing to switch windows first).
Cherry-pick Test_window_split_no_room fix from v9.1.0121.
Update nvim_win_set_config to handle win_split_ins failure in later commits.
Problem: nvim_open_win blocking all win_set_buf autocommands when !enter &&
!noautocmd is too aggressive.
Solution: temporarily block WinEnter/Leave and BufEnter/Leave events when
setting the buffer. Delegate the firing of BufWinEnter back to win_set_buf,
which also has the advantage of keeping the timing consistent (e.g: before the
epilogue in enter_buffer, which also handles restoring the cursor position if
autocommands didn't change it, among other things). Reword the documentation for
noautocmd a bit.
I pondered modifying do_buffer and callees to allow for BufEnter/Leave being
conditionally disabled, but it seems too invasive (and potentially error-prone,
especially if new code paths to BufEnter/Leave are added in the future).
Unfortunately, doing this has the drawback of blocking ALL such events for the
duration, which also means blocking unrelated such events; like if window
switching occurs in a ++nested autocmd fired by win_set_buf. If this turns out
to be a problem in practice, a different solution specialized for nvim_open_win
could be considered. :-)
Problem: currently, for splits, nvim_win_set_config accepts win without any of
split or vertical set, which has little effect and seems error-prone.
Solution: require at least one of split or vertical to also be set for splits.
Also, update nvim_win_set_config docs, as it's no longer limited to just
floating and external windows.
Problem: splitting is disallowed in some cases to prevent the window layout
changes while a window is closing, but it's not checked for.
Solution: check for this, and set the API error message directly.
(Also sneak in a change to tui.c that got lost from #27352; it's a char* buf,
and the memset is assuming one byte each anyway)
Problem: WinNew and win_enter autocommands can delete the target buffer to
switch to, causing a heap-use-after-free.
Solution: store a bufref to the buffer, check it before attempting to switch.
Problem: if switch_win{_noblock} fails to restore the old curwin after WinNew
(e.g: it was closed), wp will become the new curwin, but win_set_buf enter
events would still be blocked if !enter && !noautocmd.
Solution: fire them, as we've actually entered the new window.
Note: there's a problem of switch_win{_noblock} failing to restore the old
curwin, leaving us in wp without triggering WinEnter/WinLeave, but this affects
all callers of switch_win{_noblock} anyways. (It's also not clear how WinLeave
can be called if the old curwin was closed already).
Problem: BufWinEnter is not fired when not entering a new window, even when a
different buffer is specified and buffer-related autocommands are unblocked
(!noautocmd).
Solution: fire it in the context of the new window and buffer. Do not do it if
the buffer is unchanged, like :{s}buffer.
Be wary of autocommands! For example, it's possible for nvim_win_set_config to
be used in an autocommand to move a window to a different tabpage (in contrast,
things like wincmd T actually create a *new* window, so it may not have been
possible before, meaning other parts of Nvim could assume windows can't do
this... I'd be especially cautious of logic that restores curwin and curtab
without checking if curwin is still valid in curtab, if any such logic exists).
Also, bail early from win_set_buf if setting the temp curwin fails; this
shouldn't be possible, as the callers check that wp is valid, but in case that's
not true, win_set_buf will no longer continue setting a buffer for the wrong
window.
Note that pum_create_float_preview also uses win_set_buf, but from a glance,
doesn't look like it properly checks for autocmds screwing things up (win_enter,
nvim_create_buf...). I haven't addressed that here.
Also adds some test coverage for nvim_open_win autocommands.
Closes#27121.
Problem: win_set_config should have the observable effect of moving an existing
window to another place, but instead fires autocommands as if a new window was
created and entered (and does not fire autocommands reflecting a "return" to the
original window).
Solution: do not fire win_enter-related autocommands when splitting the window,
but continue to fire them when entering the window that fills the new space when
moving a window to a different tabpage, as the new curwin changes.
Also, remove "++once" from the WinEnter autocmd in the other test, as omitting
it also crashed Nvim before this fix.
Problem: win_enter autocommands can close new_curwin, crashing if it was the
last window in its tabpage after removing win, or can close parent, crashing
when attempting to split it later.
Solution: remove win first, check that parent is valid after win_enter.
NOTE: This isn't actually quite right, as this means win is not in the window
list or even has a frame when triggering enter autocommands (so it's not
considered valid in the tabpage). This is addressed in later commits.
Problem: 'shortmess' "F" flag doesn't work properly with 'autoread'
(after 9.1.0154)
Solution: Hide the file info message instead of the warning dialog
(zeertzjq)
closes: vim/vim#14159closes: vim/vim#141588a01744c56
Problem: Text is not redrawn with 'relativenumber' when only the 'statuscolumn' is redrawn after inserted lines.
Solution: Force a full redraw if statuscolumn width changed.
Problem:
`vim.lsp.util.rename()` deletes the buffers that are affected by
renaming. This has undesireable side effects. For example, when renaming
a directory, all buffers under that directory are deleted and windows
displaying those buffers are closed. Also, buffer options may change
after renaming.
Solution:
Rename the buffers with :saveas.
An alternative approach is to record all the relevant states and restore
it after renaming, but that seems to be more complex. In fact, the older
version was attempting to restore the states but only partially and
incorrectly.
- Added `@inlinedoc` so single use Lua types can be inlined into the
functions docs. E.g.
```lua
--- @class myopts
--- @inlinedoc
---
--- Documentation for some field
--- @field somefield integer
--- @param opts myOpts
function foo(opts)
end
```
Will be rendered as
```
foo(opts)
Parameters:
- {opts} (table) Object with the fields:
- somefield (integer) Documentation
for some field
```
- Marked many classes with with `@nodoc` or `(private)`.
We can eventually introduce these when we want to.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
Problem: Floats are arbitrarily positioned at 1 row above screen size.
Solution: Position at 1 row above 'cmdheight', only if window is hidden behind the message area.
Previously rename would unconditionally read the to-be-renamed file from the
disk and write it to the disk. This is redundant in some cases
If the file is not already loaded, it's not attached to lsp client, so nvim
doesn't need to care about this file.
If the file is loaded but has no change, it doesn't need to be written.
Problem: Some LSP servers return `textDocument/documentLink` responses
containing file URIs with line/column numbers in the fragment.
`vim.uri_to_fname` returns invalid file names for these URIs.
Solution: Remove the URI fragment from file URIs.
Problem:
The documentation flow (`gen_vimdoc.py`) has several issues:
- it's not very versatile
- depends on doxygen
- doesn't work well with Lua code as it requires an awkward filter script to convert it into pseudo-C.
- The intermediate XML files and filters makes it too much like a rube goldberg machine.
Solution:
Re-implement the flow using Lua, LPEG and treesitter.
- `gen_vimdoc.py` is now replaced with `gen_vimdoc.lua` and replicates a portion of the logic.
- `lua2dox.lua` is gone!
- No more XML files.
- Doxygen is now longer used and instead we now use:
- LPEG for comment parsing (see `scripts/luacats_grammar.lua` and `scripts/cdoc_grammar.lua`).
- LPEG for C parsing (see `scripts/cdoc_parser.lua`)
- Lua patterns for Lua parsing (see `scripts/luacats_parser.lua`).
- Treesitter for Markdown parsing (see `scripts/text_utils.lua`).
- The generated `runtime/doc/*.mpack` files have been removed.
- `scripts/gen_eval_files.lua` now instead uses `scripts/cdoc_parser.lua` directly.
- Text wrapping is implemented in `scripts/text_utils.lua` and appears to produce more consistent results (the main contributer to the diff of this change).
With "intermediate" flag, only using minimal timeout is too short and
may lead to failures.
Also remove the fallback timeout in screen:expect_unchanged(), as having
a different fallback timeout than screen:expect() is confusing.
