Problem: tests: test_vim9_builtin is a bit slow
Solution: source tests from a buffer instead of
writing and sourcing a file (Yegappan Lakshmanan)
closes: vim/vim#1461422697b6179
N/A patch:
vim-patch:9.1.0299: Vim9: return type not set for a lambda assigned to script var
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash when typing many keys with D- modifier (after 9.1.0227).
Solution: Don't treat a 0x80 byte inside a special sequence as the start
of a special sequence (zeertzjq).
closes: vim/vim#146136b13e3d4e4
Problem: Page scrolling does not always place the cursor at the top or
bottom of the window (Mathias Rav)
Solution: Place the cursor at the top or bottom of the window.
(Luuk van Baal)
4b6b0c4024
Problem:
Besides being redundant with vim.iter():flatten(), `tbl_flatten` has
these problems:
- Has `tbl_` prefix but only accepts lists.
- Discards some results! Compare the following:
- iter.flatten():
```
vim.iter({1, { { a = 2 } }, { 3 } }):flatten():totable()
```
- tbl_flatten:
```
vim.tbl_flatten({1, { { a = 2 } }, { 3 } })
```
Solution:
Deprecate tbl_flatten.
Note:
iter:flatten() currently fails ("flatten() requires a list-like table")
on this code from gen_lsp.lua:
local anonym = vim.iter({ -- remove nil
anonymous_num > 1 and '' or nil,
'---@class ' .. anonymous_classname,
}):flatten():totable()
Should we enhance :flatten() to work for arrays?
Problem: tests: test_winfixbuf is a bit slow
Solution: use defer if possible, reset hidden option, use --not-a-term
when starting Vim using system() (Yegappan Lakshmanan)
closes: vim/vim#146114baf908d60
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: runtime(uci): No support for uci file types
(Wu, Zhenyu)
Solution: include basic uci ftplugin and syntax plugins
(Colin Caine)
closes: vim/vim#145754b3fab14db
Co-authored-by: Colin Caine <complaints@cmcaine.co.uk>
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: No test that completing a partial mapping clears 'showcmd'.
Solution: Complete partial mappings in Test_showcmd_part_map() instead
of using :echo. Adjust some comments (zeertzjq).
closes: vim/vim#14580094c4390bd
Problem:
We need to establish a pattern for `enable()`.
Solution:
- First `enable()` parameter is always `enable:boolean`.
- Update `vim.diagnostic.enable()`
- Update `vim.lsp.inlay_hint.enable()`.
- It was not released yet, so no deprecation is needed. But to help
HEAD users, it will show an informative error.
- vim.deprecate():
- Improve message when the "removal version" is a *current or older* version.
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: vim/vim#14572acdfb8a979
Problem: Cursor wrong after using setcellwidth() in terminal
(mikoto2000)
Solution: output additional spaces, so the behaviour matches the GUI
(mikoto2000)
fixes: vim/vim#14539closes: vim/vim#14540
Fix CUI `setcellwidths` characters draw behavior to same GUI behavior.
e20fa59903
This is already fixed and tested in Nvim in #28322.
Co-authored-by: mikoto2000 <mikoto2000@gmail.com>
Problem: a few memory leaks are found
(LuMingYinDetect )
Solution: properly free the memory
Fixes the following problems:
- Memory leak in f_maplist()
fixes: vim/vim#14486
- Memory leak in option.c
fixes: vim/vim#14485
- Memory leak in f_resolve()
fixes: vim/vim#14484
- Memory leak in f_autocmd_get()
related: vim/vim#14474
- Memory leak in dict_extend_func()
fixes: vim/vim#14477fixes: vim/vim#14238closes: vim/vim#1451729269a71b5
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Error with matchaddpos() and empty list
(@rickhow)
Solution: Return early for an empty list
fixes: vim/vim#14525closes: vim/vim#14563f7d31adcc2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Renaming non-current buffer changes working directory when
'autochdir' is set.
Solution: Temporarily disable 'autochdir'. Add more tests for the
win_set_buf change.
- Test maparg() and maplist() in the same test.
- Use matches() instead of string.match().
- Avoid overlong lines and strange spacing in exec_lua().
- Revert code change from last PR as the variable may be needed.
Problem: String interpolation fails for List type
Solution: use implicit string(list) for string interpolation and :put =
(Yegappan Lakshmanan)
related: vim/vim#14529closes: vim/vim#14556bce51d9005
Cherry-pick eval_to_string_eap() from patch 8.2.1914.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: filetype: some requirements files are not recognized
Solution: Detect '*-requirements.txt', 'constraints.txt',
'requirements.in', 'requirements/*.txt' and 'requires/*.txt'
as requirements filetype, include pip compiler, include
requirements filetype and syntax plugin
(Wu, Zhenyu, @raimon49)
closes: vim/vim#14379f9f5424d3e
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Co-authored-by: raimon <raimon49@hotmail.com>
Problem: Vim9: Not all function argument types are properly checked.
Solution: Add and improve argument type checks. (Yegappan Lakshmanan,
closesvim/vim#8839)
fc3b775055
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: filetype: some mail tools not recognized
Solution: Detect '.mbsncrc' as conf, '.msmtprc' as msmtp
and '.notmuch-config' as ini filetype
(Shane-XB-Qian)
closes: vim/vim#14533a7a9a476cf
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
Problem: No test for highlight behavior with 'ambiwidth'.
Solution: Add a screendump test for 'ambiwidth' with 'cursorline'.
(zeertzjq)
closes: vim/vim#14554a59e031aa0
Problem:
vim.diagnostic.enable() does not match the signature of vim.lsp.inlay_hint.enable()
Solution:
- Change the signature so that the first 2 args are (bufnr, enable).
- Introduce a 3rd `opts` arg.
- Currently it only supports `opts.ns_id`.
