runtime(doc): all secure options should note this restriction in the documentation (vim/vim#13448)
Problem: Not all secure options document their status
Solution: Describe secure context :set restrictions in each help entry
8ebdbc9e6d
Co-authored-by: dkearns <dougkearns@gmail.com>
The prefix option of the diagnostic virtual text can be a function,
but previously it was only a function of diagnostic.
This function should also have additional parameters index and total,
more consistently and similarily as in the prefix function for
`vim.diagnostic.open_float()`.
These additional parameters will be useful when there are too many
number of diagnostics in a single line.
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Fixes a regression from 5e5f5174e3
Until that commit we had a logic like this:
`local prefix = startbyte and line:sub(startbyte + 1) or line_to_cursor:sub(word_boundary)`
The commit changed the logic and no longer cut off the line at the cursor, resulting in a prefix that included trailing characters
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: vim/vim#133997d254dbc2d
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: vim/vim#1340584394f2be4
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
Fixes https://github.com/neovim/neovim/issues/25177
I initially wanted to split this into a refactor commit to make it more
testable, but it appears that already accidentally fixed the issue by
normalizing lnum/col to 0-indexing
To be more in line with the specification:
> To support the evolution of enumerations the using side of an enumeration shouldn’t fail on an enumeration value it doesn’t know. It should simply ignore it as a value it can use and try to do its best to preserve the value on round trips
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem:
When enabling diagnostics, there can be diagnostics for unloaded buffer,
but some handlers nevertheless attempt to set extmarks in such buffers.
Solution:
* Exit underline/virtual_text handler if buffer is not loaded.
* Don't require is_loaded as precondition for show(), because handlers
don't necessarily depend on it.
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: no max callback recursion limit
Solution: bail out, if max call recursion for callback functions
has been reached.
This checks the 'maxfuncdepth' setting and throws E169 when a callback
function recursively calls itself.
closes: vim/vim#13337closes: vim/vim#1333947510f3d65
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: vim/vim#13320bd734c3bea
Co-authored-by: James McCoy <jamessan@jamessan.com>
runtime(doc): Improve command-line completion docs (vim/vim#13331)
* Improve command-line completion docs
Add more details about 'ignorecase' and its effect on cmdline
completion.
Make sure keys used in wildmenu are properly documented and linked in the
keys' documentation entries, and in `:h index` for proper
cross-referencing, as wildmenu popup is slightly different from
insert-mode popup menu.
* Fix docs typos
2bbd0d30ee
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Follw up to 63b3408551
`is_pull` should be optional, otherwise it is an API change that
introduces warnings in consumers.
Also fixes the type annotation of `_client_pull_namespaces` where the
key is a string.
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: vim/vim#133164a82bdfaa8
Co-authored-by: Martin Tournoij <martin@arp242.net>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: strange error number
Solution: change error number,
add doc tag for E1507
closes: vim/vim#13270ea746f9e86
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
