Problem: No test for escaping '<' with shellescape()
Solution: Add a test. Use memcpy() in code to make it easier to
understand. Fix a typo (zeertzjq).
closes: vim/vim#1487688c8c547d5
Problem: Testing the shell option is incomplete and spread out.
Solution: Move shell tests to one file and increase coverage. (Yegappan
Lakshmanan, closesvim/vim#8464)
054794c20f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: getregionpos() behaves inconsistently for a partly-selected
multibyte char.
Solution: Always use column of the first byte for a partly-selected
multibyte char (zeertzjq).
closes: vim/vim#14851ef73374dc3
Problem: Can't use a blockwise selection with a width for getregion().
Solution: Add support for blockwise selection with width like the return
value of getregtype() or the "regtype" value of TextYankPost
(zeertzjq).
closes: vim/vim#14842afc2295c22
Problem: Strange error message when using islocked() with a number.
(Yegappan Lakshmanan)
Solution: Check that the name is empty.
1840a7b4e3
Use ll_name_len instead.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot filter the history
Solution: Implement :filter :history
closes: vim/vim#1483542a5b5a6d0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() can't properly indicate positions beyond eol.
Solution: Add an "eol" flag that enables handling positions beyond end
of line like getpos() does (zeertzjq).
Also fix the problem that a position still has the coladd beyond the end
of the line when its column has been clamped. In the last test case
with TABs at the end of the line the old behavior is obviously wrong.
I decided to gate this behind a flag because returning positions that
don't correspond to actual characters in the line may lead to mistakes
for callers that want to calculate the length of the selected text, so
the behavior is only enabled if the caller wants it.
closes: vim/vim#148382b09de9104
Problem: Wrong Ex command executed when :g uses '?' as delimiter and
pattern contains escaped '?'.
Solution: Don't use "*newp" when it's not allocated (zeertzjq).
closes: vim/vim#148373074137542
Problem: Wrong yanking with exclusive selection and virtualedit=all,
and integer overflow when using getregion() on it.
Solution: Set coladd when decreasing column and 'virtualedit' is active.
Add more tests for getregion() with 'virtualedit' (zeertzjq).
closes: vim/vim#14830701ad50a9e
Problem: getregionpos() doesn't handle one char selection.
Solution: Handle startspaces differently when is_oneChar is set.
Also add a test for an exclusive charwise selection with
multibyte chars (zeertzjq)
closes: vim/vim#1482552a6f34887
Problem: tests: some issues with termdebug mapping test
Solution: Use assert_{true,false} if suitable, change
order of expected and actual arguments in assert() calls.
(Ken Takata)
closes: vim/vim#14818
related: 7fbbd7f
ffed1540f3
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Tag guessing leaves wrong search history with very short names
(after 9.1.0426).
Solution: Use the correct variable for pattern length (zeertzjq).
closes: vim/vim#1481742cd192daa
Cherry-pick Test_tagbsearch() changes from patch 9.0.0767.
Problem: block_editing errors out when using del
(@Jamarley)
Solution: Change ins_len from size_t to int and
properly check that it doesn't become negative
There is a check in os.c that verifies that `ins_len` does not become
negative:
```
if (pre_textlen >= 0 && (ins_len = len - pre_textlen - offset) > 0)
```
However this only works, if ins_len can actually become negative and
unfortunately, ins_len has been declared as `size_t` so instead of
becoming negative it will wrap around and be very large.
So let's define it as integer, after which the condition above
properly catches this condition.
fixes: vim/vim#14734closes: vim/vim#14735d5c8c0920e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregionpos() wrong with blockwise mode and multibyte.
Solution: Use textcol and textlen instead of start_vcol and end_vcol.
Handle coladd properly (zeertzjq).
Also remove unnecessary buflist_findnr() in add_regionpos_range(), as
getregionpos() has already switched buffer.
closes: vim/vim#14805c95e64f41f
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: vim/vim#14609closes: vim/vim#14617b4757e627e
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Cannot move to previous/next rare word
(Colin Kennedy)
Solution: Add the ]r and [r motions (Christ van Willegen)
fixes: vim/vim#14773closes: vim/vim#147808e4c4c7d87
Co-authored-by: Christ van Willegen - van Noort <github.com@vanwillegen-vannoort.nl>
Problem: Unable to leave long line with 'smoothscroll' and 'scrolloff'.
Corrupted screen near the end of a long line with 'scrolloff'.
(Ernie Rael, after 9.1.0280)
Solution: Only correct cursor in case scroll_cursor_bot() was not itself
called to make the cursor visible. Avoid adjusting for
'scrolloff' beyond the text line height (Luuk van Baal)
b32055e504
vim-patch:9.1.0416: some screen dump tests can be improved
Problem: some screen dump tests can be improved (after 9.1.0414)
Solution: Make sure screen state changes properly and is captured in the
screen dumps (Luuk van Baal)
2e642734f4
Problem: smoothscroll may cause infinite loop, with
very narrow windows
(Jaehwang Jung, after v9.1.0280)
Solution: Check for width1 being negative, verify
that win_linetabsize does not overflow
fixes: vim/vim#14750closes: vim/vim#14772eff20eb35d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No scrolling happens with half-page scrolling with line
filling entire window when 'smoothscroll' is disabled.
(Mathias Rav, after v9.1.0285)
Solution: Adjust amount to move cursor by so that it is moved the same
number of lines as was scrolled, even when scrolling different
number of lines than requested with 'nosmoothscroll'.
58448e09be
Problem: Divide by zero with getmousepos() and 'smoothscroll'.
Solution: Don't compute skip_lines when width1 is zero.
(zeertzjq)
closes: vim/vim#14747031a745608
Problem: filetype: zsh module files are not recognized
Solution: Detect '*.mdh' and '*.epro' as C filetype, '*.mdd' as zsh
filetype, determine zsh-modules '*.pro' from from it's content
(Wu, Zhenyu)
closes: vim/vim#14737887a38cee7
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: Wrong display with 'smoothscroll' when changing quickfix list.
Solution: Reset w_skipcol when replacing quickfix list (zeertzjq).
closes: vim/vim#14730c7a8eb5ff2
Problem: cursor() and getregion() don't handle v:maxcol well.
Solution: Add special handling for v:maxcol like setpos() does.
(zeertzjq)
closes: vim/vim#146982ffdae7948
Problem: filetype: stylus files not recognized
Solution: Detect '*.styl' and '*.stylus' as stylus filetype,
include indent, filetype and syntax plugin
(Philip H)
closes: vim/vim#146562d919d2744
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Problem: filetype: .out files recognized as tex files
Solution: Do not set an explicit filetype until it is clear what this
should be (shane.xb.qian)
closes: vim/vim#14670e35478bc9d
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
Problem: Kbuild files are not recognized.
Solution: Detect Kbuild files as make files.
(Bruno Belanyi)
closes: vim/vim#146765cbc9a69e5
Co-authored-by: Bruno BELANYI <bruno@belanyi.fr>
Problem: cbuffer and similar quickfix and locationlist commands don't
accept a range, even so it is documented they should
(ilan-schemoul, after 8.1.1241)
Solution: Define ex commands with ADDR_LINES instead of ADDR_OTHER
fixes: vim/vim#14638closes: vim/vim#14657652c821366
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: When :edit an existing buffer, line('w$') may return a
wrong result.
Solution: Reset w_valid in curwin_init() (Jaehwang Jung)
`do_ecmd()` reinitializes the current window (`curwin_init()`) whose
`w_valid` field may have `VALID_BOTLINE` set. Resetting `w_botline`
without marking it as invalid makes subsequent `validate_botline()`
calls a no-op, thus resulting in wrong `line('w$')` value.
closes: vim/vim#14642eb80b8304e
Co-authored-by: Jaehwang Jung <tomtomjhj@gmail.com>
Specifically, functions that are run in the context of the test runner
are put in module `test/testutil.lua` while the functions that are run
in the context of the test session are put in
`test/functional/testnvim.lua`.
Closes https://github.com/neovim/neovim/issues/27004.
Problem: tests: test_vim9_builtin is a bit slow
Solution: source tests from a buffer instead of
writing and sourcing a file (Yegappan Lakshmanan)
closes: vim/vim#1461422697b6179
N/A patch:
vim-patch:9.1.0299: Vim9: return type not set for a lambda assigned to script var
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash when typing many keys with D- modifier (after 9.1.0227).
Solution: Don't treat a 0x80 byte inside a special sequence as the start
of a special sequence (zeertzjq).
closes: vim/vim#146136b13e3d4e4
Problem: Page scrolling does not always place the cursor at the top or
bottom of the window (Mathias Rav)
Solution: Place the cursor at the top or bottom of the window.
(Luuk van Baal)
4b6b0c4024
Problem: tests: test_winfixbuf is a bit slow
Solution: use defer if possible, reset hidden option, use --not-a-term
when starting Vim using system() (Yegappan Lakshmanan)
closes: vim/vim#146114baf908d60
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
