Problem:
Unlike termopen(), nvim_open_term() PTYs do not carriage-return the
cursor on newline ("\n") input.
nvim --clean
:let chan_id = nvim_open_term(1, {})
:call chansend(chan_id, ["here", "are", "some", "lines"])
Actual behavior:
here
are
some
lines
Expected behaviour:
here
are
some
lines
Solution:
Add `force_crlf` option, and enable it by default.
If multiple XTGETTCAP requests are active at once (for example, for
requesting the Ms capability and truecolor capabilities), then the
TermResponse autocommand may fire for capabilities that were not
requested. Instead, make sure that the provided callback is only called
for capabilities that were actually requested.
* Collect on_bytes and flush at the invocation of the scheduled callback
to take account of commands that triggers multiple on_bytes.
* More accurately track movement of folds so that foldexpr returns
reasonable values even when the scheduled computation is not run yet.
* Start computing folds from the line above (+ foldminlines) the changed
lines to handle the folds that are removed due to the size limit.
* Shrink folds that end at the line at which another fold starts to
assign proper level to that line.
* Use level '=' for lines that are not computed yet.
- Improve CLI argument parsing, rejects invalid argument and commands as
early as possible. Also prints USAGE in the command line.
- No longer allows `--<outfile>`, use `--out <outfile>` instead.
- Print a little bit of verbose messages to better know what's going on
rather than remaining silent at all times.
- Add type annotation `gen_lsp._opt` to avoid type warnings.
Enable 'termguicolors' automatically when Nvim can detect that truecolor
is supported by the host terminal.
If $COLORTERM is set to "truecolor" or "24bit", or the terminal's
terminfo entry contains capabilities for Tc, RGB, or setrgbf and
setrgbb, then we assume that the terminal supports truecolor. Otherwise,
the terminal is queried (using both XTGETTCAP and SGR + DECRQSS). If the
terminal's response to these queries (if any) indicates that it supports
truecolor, then 'termguicolors' is enabled.
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Vim does not detect pacman.log file
Solution: Detect pacmanlogs and add syntax highlighting
pacman.log is a filetype common to Arch Liux and related distributions.
Add some simple syntax highlighting for the pacmanlog filetype.
closes: vim/vim#136181e5d66408e
Co-authored-by: Ronan Pigott <ronan@rjp.ie>
PROBLEM: `vim.treesitter.get_node()` does not recognize the `lang` in
the option table. This option was used in somewhere else, for instance,
`vim.treesitter.dev` (for `inspect_tree`) but was never implemented.
SOLUTION: Make `get_node()` correctly use `opts.lang` when getting a
treesitter parser.
Problem: html.angular ft is problematic
Solution: partly revert v9.0.2137
The html.angular filetype causes issues and does not trigger FileType
autocommands for the html or angular filetypes.
So let's roll back that particular change and detect this only as html
file
related: https://github.com/vim/vim/pull/13594#issuecomment-1834465890closes: vim/vim#136044f3480c943
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
`LanguageTree:for_each_tree` calls itself for child nodes, so when we
calls `for_each_tree` inside `for_each_tree`, this quickly leads to
exponential tree calls.
Solution:
Use `pairs(child:trees())` directly in this case, as we don't need the
extra callback for each children, this is already handled from the outer
`for_each_tree` call
When first opened, the tree-sitter inspector traverses all of the nodes
in the buffer to calculate an array of nodes. This traversal is done
only once, and _all_ nodes (both named and anonymous) are included.
Toggling anonymous nodes in the inspector only changes how the tree is
drawn in the buffer, but does not affect the underlying data structure
at all.
When the buffer is traversed and the list of nodes is calculated, we
don't know whether or not anonymous nodes will be displayed in the
inspector or not. Thus, we cannot determine during traversal where to
put closing parentheses. Instead, this must be done when drawing.
When we draw, the tree structure has been flatted into a single array,
so we lose parent-child relationships that would otherwise make
determining the number of closing parentheses straightforward. However,
we can instead rely on the fact that a delta between the depth of a node
and the depth of the successive node _must_ mean that more closing
parentheses are required:
(foo
(bar)
(baz) ↑
│
└ (bar) and (baz) have different depths, so (bar) must have an
extra closing parenthesis
This does not depend on whether or not anonymous nodes are displayed and
so works in both cases.
The OptionSet autocommand does not fire until Vim has finished starting,
so setting 'background' before the VimEnter event would not fire the
OptionSet event. The prior implementation also waited until VimEnter to
set 'background', so this was a regression introduced when moving
background detection into Lua.
Problem: Only injections under the top level tree are found.
Solution: Iterate through all trees to find injections. When two
injections are contained within the same node in the parent tree, prefer
the injection with the larger byte length.
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: vim/vim#13588fcaeb3d42b
tmux intercepts and ignores XTGETTCAP so wrap the query in the tmux
passthrough sequence to make sure the query arrives at the "host"
terminal.
Users must still set the 'allow-passthrough' option in their tmux.conf.
decor->text.str pointer must go. This removes it for conceal char,
in preparation for a larger PR which will also handle the sign case.
By actually allowing composing chars for a conceal chars, this
becomes a feature and not just a refactor, as a bonus.
Problem: not all nushell files detected
Solution: use *.nu to detect nushell files
closes: vim/vim#13586b9efc72c24
Co-authored-by: Daniel Buch Hansen <boogiewasthere@gmail.com>
When parsing with a range, languagetree looks up injections and adds
them if needed. This explicitly invalidates parser, making `is_valid`
report `false` both when including and excluding children.
This is an attempt to describe desired behaviour of `is_valid` in tests,
with what ended up being a single line change to satisfy them.
Add syntax and filetype plugins for SWIG (Simplified Wrapper Interface
Generator) description files.
The default syntax for .i files highlights comments in a reverse
color scheme which doesn't look well. This syntax builds
on vim's c++ syntax by adding highlighting for common swig
directives and user defined directives. For an alternative
syntax, see vimscript vim/vim#1247 (which I found after writing this).
closes: vim/vim#135622e31065a65
Co-authored-by: Julien Marrec <julien.marrec@gmail.com>
Co-authored-by: Matěj Cepl <mcepl@cepl.eu>
runtime(doc): Fix whitespace and formatting of some help files (vim/vim#13549)
596a9f29c8
N/A patch:
vim-patch:aabca259fa48
Co-authored-by: h_east <h.east.727@gmail.com>
Should help with https://github.com/neovim/neovim/issues/23291
On linux `new_fs_event` doesn't support recursive watching, but we can
still use it to watch folders.
The downside of this approach is that we may end up sending some false
`Deleted` events. For example, if you save a file named `foo` there will
be a intermediate `foo~` due to the save mechanism of neovim.
The events we get from vim.uv in that case are:
- rename: foo~
- rename: foo~
- rename: foo
- rename: foo
- change: foo
- change: foo
The mechanism in this PR uses a debounce to reduce this to:
- deleted: foo~
- changed: foo
`foo~` will be the false positive.
I suspect that for the LSP case this is good enough. If not, we may need
to follow up on this and keep a table in memory that tracks available
files.
