Problem: filetype: Mediawiki files are not recognized
Solution: detect "*.mw" and "*.wiki" as mediawiki filetype,
include basic syntax and filetype plugins.
(AvidSeeker)
closes: vim/vim#15266b5844104ab
Co-authored-by: AvidSeeker <avidseeker7@protonmail.com>
Problem: ocaml runtime files are outdated
Solution: sync those files with the upstream repo,
detect a few more ocaml files
(Yinzuo Jiang)
closes: vim/vim#15260700cf8cfa1
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: filetype: *.pdf_tex files are not recognized
Solution: Detect '*.pdf_tex' files as tex filetype
(Jonas Dujava)
Those files are generated by inkscape, when exporting, see e.g.
https://inkscape.org/doc/inkscape-man.htmlcloses: vim/vim#1525028145e005d
Co-authored-by: Jonas Dujava <jonas.dujava@gmail.com>
Problem: due to single list of sorted patterns, their matching inside
`vim.filetype.match()` was done very similarly but with extra checks
to stop processing negative priority patterns before extensions.
Solution: create separated sorted lists for patterns with non-negative
and negative priorities. This allows to process them in a single
extracted function making the main codeflow a bit nicer and more
easily expandable.
Problem: filetype: angular ft detection is still problematic
(after 9.1.0551)
Solution: detect htmlangular filetype only by inspecting the content,
do not try to determine it from a generic name like
'*.component.html'
For the reasons mentioned here:
https://github.com/vim/vim/pull/13594#issuecomment-1834465890
related: vim/vim#15190
related: vim/vim#13594
related: vim/vim#13604c03f631b7b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: htmlangular files are not properly detected
Solution: Use the new htmlangular filetype for angular files, because
since angular v17, those are no longer valid HTML files.
(Dennis van den Berg)
Since Angular 17, the new Control Flow Syntax is not valid HTML. This PR
adds a new filetype detection for the HTML templates of Angular.
It first checks the filename. The Angular convention is to use
*.component.html for the template. However, this is not mandatory.
If the filename does not match, it will check the contents of the file
if it contains:
- One of the Control-Flow blocks: @if, @for, @switch, @defer
- A structural directive: *ngIf, *ngFor, *ngSwitch, *ngTemplateOutlet
- Builtin Angular elements: ng-template or ng-content
- String interpolation: {{ something }}
This enables the Angular LSP to attach only to htmlangular filetypes, as
well as language parsers, such as tree-sitter.
closes: vim/vim#151901ad194c0df
Co-authored-by: Dennis van den Berg <dennis.vandenberg@nedap.com>
Problem: filetype: antlr4 files are not recognized
Solution: Detect '*.g4' as antlr4 filetype, include a simple antlr4
syntax and filetype plugin (Yinzuo Jiang)
closes: vim/vim#151914a7a4a3675
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: No way to get the arity of a Vim function
(Austin Ziegler)
Solution: Enhance get() Vim script function to return the function
argument info using get(func, "arity") (LemonBoy)
fixes: vim/vim#15097closes: vim/vim#1510948b7d05a4f
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: `vim.filetype.match()` tries to match on contents even if there
is no contents (empty buffer or `{''}` explicit contents).
This results in extra avoidable execution duration for cases.
It matters, for example, when trying to match filetype based solely
on file name (which still needs `contents` or `buf` to properly match
earlier in the code path).
Solution: skip matching based solely on contents if it is `{''}`. This
works because:
- Matching solely on content is done after any user-configured
`vim.filetype.add()` hooks.
- All default matching on content might depend on supplied path
*only* if there is non-empty content (like in
`require('vim.filetype.detect').match_from_hashbang()`).
Problem:
Exiting the insert mode with ctrl-c does not trigger InsertLeave
autocmd. This may lead to nil error in treesitter foldexpr.
Solution:
Check nil. Folds still can be stale after exiting the insert mode with
ctrl-c, but it will be eventually updated correctly.
An alternative solution would be to ensure that exiting the insert mode
always triggers do_foldupdate. This can be done either by "fixing"
ctrl-c or with on_key callback that checks ctrl-c (nvim-cmp does this).
Problem: Unused assignment in sign_define_cmd()
Solution: Remove the assignment. Also document the "priority" flag of
sign_define(). (zeertzjq)
closes: vim/vim#15169fc3f5dba52
Problem: not possible to assign priority when defining a sign
(Mathias Fußenegger)
Solution: Add the priority argument for the :sign-define ex command and
the sign_define() function (LemonBoy)
Use the specified value instead of the default one (SIGN_DEF_PRIO) when
no priority is explicitly specified in sign_place or :sign place.
fixes: vim/vim#8334closes: vim/vim#15124b975ddfdf9
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: filetype: zone files are not recognized
(rpdprd)
Solution: Detect '*.zone' files as bindzone filetype
fixes: vim/vim#14222f095539b39
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: signed number detection for CTRL-X/A can be improved
(Chris Patuzzo)
Solution: Add the new "blank" value for the 'nrformat' setting. This
will make Vim assume a signed number only if there is a blank
in front of the sign.
(distobs)
fixes: vim/vim#15033closes: vim/vim#1511025ac6d67d9
Co-authored-by: distobs <cuppotatocake@gmail.com>
This patch replaces fswatch with inotifywait from inotify-toools:
https://github.com/inotify-tools/inotify-tools
fswatch takes ~1min to set up recursively for the Samba source code
directory. inotifywait needs less than a second to do the same thing.
https://github.com/emcrisostomo/fswatch/issues/321
Also it fswatch seems to be unmaintained in the meantime.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Problem: the code and docs for vim.diagnostic.JumpOpts.float send mixed
signals about what the default should be. When the option is first set,
in the global_diagnostic_options table, the comment clearly says that
the default is false. Later in the code, in goto_diagnostic, there's
a line that sets the default to true if no default is present. Finally,
the docs say that the default is true.
Solution: Change the docs to reflect the new default of false and fix
the goto_diagnostic function.
Problem:
Error when calling vim.treesitter.start() and vim.treesitter.stop() in
init.lua.
Solution:
Ensure syntaxset augroup exists after loading synload.vim.
Although the built-in pum completion mechanism will filter anyway on the
next input it is odd if the initial popup shows entries which don't
match the current prefix.
Using fuzzy match on the label/prefix is compatible with
`completeopt+=fuzzy` and also doesn't seem to break postfix snippet
cases
Closes https://github.com/neovim/neovim/issues/29287
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
Problem: with a single `context.options` there is no way for user to
force which scope (local, global, both) is being temporarily set and
later restored.
Solution: replace single `options` context with `bo`, `go`, `wo`, and
`o`. Naming and implementation follows how options can be set directly
with `vim.*` (like `vim.bo`, etc.).
Options are set for possible target `win` or `buf` context.
Problem: `vim._with()` has many different use cases which are not
covered with tests.
Solution: cover with tests. Some (many) test cases are intentionally
marked as "pending" because they cover cases which don't work as
expected at the moment (and fixing them requires specific knowledge of
C codebase). Use them as a reference for future fixes.
Also some of "can be nested" tests currently might pass only because
the tested context doesn't work.
