Should help with https://github.com/neovim/neovim/issues/23291
On linux `new_fs_event` doesn't support recursive watching, but we can
still use it to watch folders.
The downside of this approach is that we may end up sending some false
`Deleted` events. For example, if you save a file named `foo` there will
be a intermediate `foo~` due to the save mechanism of neovim.
The events we get from vim.uv in that case are:
- rename: foo~
- rename: foo~
- rename: foo
- rename: foo
- change: foo
- change: foo
The mechanism in this PR uses a debounce to reduce this to:
- deleted: foo~
- changed: foo
`foo~` will be the false positive.
I suspect that for the LSP case this is good enough. If not, we may need
to follow up on this and keep a table in memory that tracks available
files.
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Problem: [security]: overflow with count for :s command
Solution: Abort the :s command if the count is too large
If the count after the :s command is larger than what fits into a
(signed) long variable, abort with e_value_too_large.
Adds a test with INT_MAX as count and verify it correctly fails.
It seems the return value on Windows using mingw compiler wraps around,
so the initial test using :s/./b/9999999999999999999999999990 doesn't
fail there, since the count is wrapping around several times and finally
is no longer larger than 2147483647. So let's just use 2147483647 in the
test, which hopefully will always cause a failure
ac63787734
Co-authored-by: Christian Brabandt <cb@256bit.org>
Use the XTGETTCAP sequence to determine if the host terminal supports
the OSC 52 sequence and, if it does, enable the OSC 52 clipboard
provider by default.
This is only done automatically when all of the following are true:
1. Nvim is running in the TUI
2. 'clipboard' is not set to unnamed or unnamedplus
3. g:clipboard is unset
4. Nvim is running in an SSH connection ($SSH_TTY is set)
5. Nvim is not running inside tmux ($TMUX is unset)
This fixes an error that can occur in certain pathological cases when
the autocommand fires at just the right time such that it attempts to
close the timer after the timer has already exited, but before the
scheduled callback has fired.
We now let the timer continue to run even when the autocommand deletes
itself to avoid having to repeat the cleanup code multiple times. There
is no harm in letting the timer execute if the autocommand does not
exist, as the pcall will catch the error.
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: vim/vim#13533bc8f79d36a
Co-authored-by: rhysd <lin90162@yahoo.co.jp>
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem:
Platform-specific UI providers should live in `vim.ui.*`. #24164
Solution:
- Move `vim.clipboard.osc52` module to `vim.ui.clipboard.osc52`.
- TODO: move all of `clipboard.vim` to `vim.ui.clipboard`.
ref #25872
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: vim/vim#13493closes: vim/vim#135249588666360
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: recursive callback may cause issues on some archs
Solution: Decrease the limit drastically to 20
Recursive callback limit causes problems on some architectures
Since commit 47510f3d6598a1218958c03ed11337a43b73f48d we have a test
that causes a recursive popup callback function to be executed. However
it seems the current limit of 'maxfuncdepth' option value is still too
recursive for some 32bit architectures (e.g. 32bit ARM).
So instead of allowing a default limit of 100 (default value for
'maxfuncdepth'), let's reduce this limit to 20. I don't think there is a
use case where one would need such a high recursive callback limit and a
limit of 20 seems reasonable (although it is currently hard-coded).
closes: vim/vim#13495closes: vim/vim#135022076463e38
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(termdebug): improve the breakpoint sign label (vim/vim#13525)
// related vim/vim#12589
// that should be the last chat (I) with Bram, r.i.p
2dd613f57b
Co-authored-by: Shane-XB-Qian <shane.qian@foxmail.com>
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
runtime(vim): Improve :let-heredoc syntax highlighting (vim/vim#12923)
"trim" and "eval" are allowed in any order and whitespace is not
required after "=<<".
9358b8d993
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(i3config): Update for i3 4.23 (vim/vim#13522)
5994329667
Co-authored-by: Ivan Grimaldi <grimaldi.ivan@gmail.com>
Co-authored-by: Ivan Grimaldi <grimaldi.ivam@gmail.com>
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
When pasting with OSC 52 some terminals show a prompt to the user asking
for permission to read from the system clipboard. When this prompt
appears, 1s is not long enough to wait.
Increase the timeout to 10s and show a message to the user indicating
how to interrupt the wait after 1s.
Problem: No way to have extmarks automatically removed when the range it
is attached to is deleted.
Solution: Add new 'invalidate' property that will hide a mark when the
entirety of its range is deleted. When "undo_restore" is set
to false, delete the mark from the buffer instead.
When the terminal emulator sends an OSC sequence to Nvim (as a response
to another OSC sequence that was first sent by Nvim), populate the OSC
sequence in the v:termresponse variable and fire the TermResponse event.
The escape sequence is also included in the "data" field of the
autocommand callback when the autocommand is defined in Lua.
This makes use of the already documented but unimplemented TermResponse
event. This event exists in Vim but is only fired when Vim receives a
primary device attributes response.
Fixes: https://github.com/neovim/neovim/issues/25856
runtime(tar): improve the error detection
Do not rely on the fact, that the last line matches warning, error,
inappropriate or unrecognized to determine if an error occurred. It
could also be a file, contains such a keyword.
So make the error detection slightly more strict and only assume an
error occured, if in addition to those 4 keywords, also a space matches
(this assumes the error message contains a space), which luckily on Unix
not many files match by default.
The whole if condition seems however slightly dubious. In case an error
happened, this would probably already be caught in the previous if
statement, since this checks for the return code of the tar program.
There may however be tar implementations, that do not set the exit code
for some kind of error (but print an error message)? But let's keep this
check for now, not many people have noticed this behaviour until now, so
it seems to work reasonably well anyhow.
related: vim/vim#6425fixes: vim/vim#134893d37231437
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(dist): Make dist/vim.vim work properly when lacking vim9script support (vim/vim#13487)
`:return` cannot be used outside of `:function` (or `:def`) in older Vims
lacking Vim9script support or in Neovim, even when evaluation is being skipped
in the dead `:else` branch.
Instead, use the pattern described in `:h vim9-mix`, which uses `:finish` to end
script processing before it reaches the vim9script stuff.
b2a4c110a5
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
runtime(dist): add legacy version for central vim library
Also, enable the zip and gzip plugins by default, unless those variables
were not explicitly set by the user.
related: vim/vim#134134f174f0de9
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(dist): centralize safe executable check and add vim library (vim/vim#13413)
Follow up to 816fbcc26 (patch 9.0.1833: [security] runtime file fixes,
2023-08-31) and f7ac0ef50 (runtime: don't execute external commands when
loading ftplugins, 2023-09-06).
This puts the logic for safe executable checks in a single place, by introducing
a central vim library, so all filetypes benefit from consistency.
Notable changes:
- dist#vim because the (autoload) namespace for a new runtime support
library. Supporting functions should get documentation. It might make
life easier for NeoVim devs to make the documentation a new file
rather than cram it into existing files, though we may want
cross-references to it somewhere…
- The gzip and zip plugins need to be opted into by enabling execution
of those programs (or the global plugin_exec). This needs
documentation or discussion.
- This fixes a bug in the zig plugin: code setting s:tmp_cwd was removed
in f7ac0ef50 (runtime: don't execute external commands when loading
ftplugins, 2023-09-06), but the variable was still referenced. Since
the new function takes care of that automatically, the variable is no
longer needed.
cd8a3eaf53
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
It is a design goal of extmarks that they allow precise tracking
of changes across undo/redo, including restore the exact positions
after a do/undo or undo/redo cycle. However this behavior is not useful
for all usecases. Many plugins won't keep marks around for long after
text changes, but uses them more like a cache until some external source
(like LSP semantic highlights) has fully updated to changed text and
then will explicitly readjust/replace extmarks as needed.
Add a "undo_restore" flag which is true by default (matches existing
behavior) but can be set to false to opt-out of this behavior.
Delete dead u_extmark_set() code.
runtime(sh): Update sh syntax and add shDerefOffset to shDerefVarArray for bash (vim/vim#13480)
Add shDerefOffset to shDerefVarArray.
Example code:
```bash
declare -a a=({a..z})
echo "${a[@]:1:3}"
```
ce3b0136c6
Co-authored-by: Lucien Grondin <grondilu@yahoo.fr>
runtime(script.vim): make strace ft check less strict (vim/vim#13482)
Strace output, depending on parameters (-ttf this time), can dump both
times and pid:
1038 07:14:20.959262 execve("./e.py", ["./e.py"], 0x7ffca1422840 /* 51 vars */) = 0 <0.000150>
So loose the regexp matching this, so that the above is matched too.
Fixesvim/vim#13481.
2f54c13292
Co-authored-by: Jiri Slaby <jirislaby@gmail.com>
Co-authored-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
`code_action` used the same parameters for all clients, which led to the
following warning and incorrect start/end column locations if using
clients with mixed encodings:
warning: multiple different client offset_encodings detected for
buffer, this is not supported yet
connection from any channel or stdio will unblock
remote_ui_wait_for_attach. Wait on stdio only if
only —embed specified, if both —embed and
—listen then wait on any channel.
Problem: Currently there is no way of customizing behavior of
`declaration`, `definition`, `typeDefinition`, and `implementation`
methods in `vim.lsp.buf` when LSP server returns `Location`. Instead,
cursor jumps to that location directly.
Solution: Normalize LSP response to be `Location[]` for those four cases.
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
runtime(sh): add shDblParen to shLoopList for bash (vim/vim#13445)
add shDblParen to shLoopList to correctly highlight
arithmetic expressions for Bash and Ksh
This should allow code such as:
```bash
declare -i i j
for i in foo bar
do ((j = 1 << j))
done
```
a390e984db
Co-authored-by: Lucien Grondin <grondilu@yahoo.fr>
runtime(doc): all secure options should note this restriction in the documentation (vim/vim#13448)
Problem: Not all secure options document their status
Solution: Describe secure context :set restrictions in each help entry
8ebdbc9e6d
Co-authored-by: dkearns <dougkearns@gmail.com>
The prefix option of the diagnostic virtual text can be a function,
but previously it was only a function of diagnostic.
This function should also have additional parameters index and total,
more consistently and similarily as in the prefix function for
`vim.diagnostic.open_float()`.
These additional parameters will be useful when there are too many
number of diagnostics in a single line.
runtime(debian): update debian related runtime files (vim/vim#13423)
* Update Debian runtime files
Add mantic as a supported Ubuntu release and move buster/kinetic to
unsupported.
Add syntax highlighting for deb822sources filetype.
Add debsources ftplugin to set relevant comment options.
Move common version information to shared/debversions.vim
Closesvim/vim#11934
* Add myself as codeowner for Debian-related runtime files
---------
7b7cda67a1
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Co-authored-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Co-authored-by: James Addison <jay@jp-hosting.net>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Fixes a regression from 5e5f5174e3
Until that commit we had a logic like this:
`local prefix = startbyte and line:sub(startbyte + 1) or line_to_cursor:sub(word_boundary)`
The commit changed the logic and no longer cut off the line at the cursor, resulting in a prefix that included trailing characters
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: vim/vim#13419b731800522
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: vim/vim#133997d254dbc2d
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: vim/vim#1340584394f2be4
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
runtime(vim): Update ftplugin - comment motions (vim/vim#13412)
Fix the pattern used by comment-motion mappings to match the start of a
block comment.
Block-comment start lines were being ignored if the previous line
contained a double-quote character anywhere in the line. Line comments
should only be ignored if the previous line is a full-line comment and,
therefore, part of the current block comment.
fea96c00e5
Co-authored-by: dkearns <dougkearns@gmail.com>
Fixes https://github.com/neovim/neovim/issues/25177
I initially wanted to split this into a refactor commit to make it more
testable, but it appears that already accidentally fixed the issue by
normalizing lnum/col to 0-indexing
