Diagnostic signs should now be configured with vim.diagnostic.config(),
but "legacy" sign definitions should go through the standard deprecation
process to minimize the impact from breaking changes.
Problem: Updating default color scheme produced some feedback.
Solution: Address the feedback.
Outline of the changes:
- Colors `Grey1` and `Grey2` are made a little bit more extreme (dark -
darker, light - lighter) to increase overall contrast.
- `gui` colors are treated as base with `cterm` colors falling back to
using 0-15 colors which come from terminal emulator.
- Update highlight group definition to not include attribute definition
if it is intended to staty uncolored.
- Tweak some specific highlight groups.
- Add a list of Neovim specific highlight groups which are now defined
differently in a breaking way.
- Minor tweaks in several other places related to default color scheme.
Problem: We have `P_(BOOL|NUM|STRING)` macros to represent an option's type, which is redundant because `OptValType` can already do that. The current implementation of option type flags is also too limited to allow adding multitype options in the future.
Solution: Remove `P_(BOOL|NUM|STRING)` and replace it with a new `type_flags` attribute in `vimoption_T`. Also do some groundwork for adding multitype options in the future.
Side-effects: Attempting to set an invalid keycode option (e.g. `set t_foo=123`) no longer gives an error.
Problem: Unpaired marks are invalidated if its column is deleted,
which may just be a "placeholder" column, e.g. for signs.
Solution: Only remove unpaired marks if its entire row is deleted.
Problem:
Unlike termopen(), nvim_open_term() PTYs do not carriage-return the
cursor on newline ("\n") input.
nvim --clean
:let chan_id = nvim_open_term(1, {})
:call chansend(chan_id, ["here", "are", "some", "lines"])
Actual behavior:
here
are
some
lines
Expected behaviour:
here
are
some
lines
Solution:
Add `force_crlf` option, and enable it by default.
uv_close asserts that a handle is not already closing. We can guard
against this assertion failure by manually checking the handle's closing
status ourselves.
Problem: line2byte behavior is changed after commit b051b13. It no
longer return `-1` on empty buffer.
Solution: use `nof_ff` instead of `!ff_dos` as condition. Then
compatible behavior of line2byte() is restored.
This is the command invoked repeatedly to make the changes:
:%s/^\(.*\)|\%(\*\(\d\+\)\)\?$\n\1|\%(\*\(\d\+\)\)\?$/\=submatch(1)..'|*'..(max([str2nr(submatch(2)),1])+max([str2nr(submatch(3)),1]))/g
Allow a "*count" suffix in a screen line to repeat the screen line for
"count" times.
The change is made to Screen:expect() and Screen:get_snapshot() instead
of Screen:render() so that screen expectations generated using code can
still work and test failures can still be readable.
A snapshot is now also printed on failure so that there is no need to
run the test again with Screen:snapshot_util().
Problem: Many places in the code use `findoption()` to access an option using its name, even if the option index is available. This is very slow because it requires looping through the options array over and over.
Solution: Use option index instead of name wherever possible. Also introduce an `OptIndex` enum which contains the index for every option as enum constants, this eliminates the need to pass static option names as strings.
Rather than writing the synchronized update begin and end sequences into
the TUI's internal buffer (where it is later flushed to the TTY), write
these sequences directly to the TTY before and after the TUI's internal
buffer is itself flushed to the TTY.
This guarantees that a synchronized update is always used when we are
actually sending data to the TTY. This means we do not need to keep
track of the TUI's "dirty" state (any sequences which affect the TUI
state will be written in the TUI's internal buffer, which is now
guaranteed to only ever be written when a synchronized update is
active).
When we convert a Lua table to an Object, we consider the table a
"dictionary" if it contains only string keys, and an array if it
contains all numeric indices with no gaps. While rare, Lua tables can
have both strictly numeric indices and gaps (e.g. { [2] = 2 }). These
currently cannot be serialized because it is not considered an array.
However, we know the maximum index of the table and as long as all of
the keys in the table are numeric, it is still possible to serialize
this table as an array. The missing indices will have nil values.
Problem: The entire marktree needs to be traversed each time a sign is
removed from the sentinel line.
Solution: Remove sentinel line and instead keep track of the number of
lines that hold up the 'signcolumn' in "max_count". Adjust this
number for added/removed signs, and set it to 0 when the
maximum number of signs on a line changes. Only when
"max_count" is decremented to 0 due to sign removal do we need
to check the entire buffer.
Also replace "invalid_top" and "invalid_bot" with a map of
invalid ranges, further reducing the number of lines to be
checked.
Also improve tree traversal when counting the number of signs.
Instead of looping over the to be checked range and counting
the overlap for each row, keep track of the overlap in an
array and add this to the count.
Problem:
Since e057b38e70#20757 we support empty key in JSON encode/decode,
but we don't allow it in RPC object => Vim dict conversion. But empty
string is a valid key in Vim dicts and the msgpack spec.
Empty string key was disallowed in 7c01d5ff92 (2014) but that
commit/PR doesn't explicitly discuss it, so presumably it was a "seems
reasonable" decision (or Vimscript didn't allow empty keys until later).
Solution:
Remove the check in `object_to_vim()`. Note that
`tv_dict_item_alloc_len` will invoke `memcpy(…, 0)` but that's allowed
by the C spec: https://stackoverflow.com/a/3751937/152142
Currently, the value of $COLORTERM in :terminal in tests depends on
outer environment because of 'notermguicolors'.
If $COLORTERM is not set in :terminal, an inner Nvim instance will try
to detect 'termguicolors' support, which may interfere with tests.
So set 'termguicolors' in outer Nvim instance unless $COLORTERM needs to
be overridden, and unset it in inner Nvim instance when running TUI.
Set 'notermguicolors' in tests which spawn a child Nvim process to force
existing tests to use 16 colors. Also refactor the child process
invocation to make things a little bit less messy.
If the color scheme is changed in a startup script, nvim used to send
multiple default_colors_set events, one for the default color scheme
and one for the user's chosen color scheme. This would cause flicker in
some UI:s. Throttle this event until we actually start drawing on the
screen.
fixes#26372
Followup to 27501d3b6a.
Problem:
CI sometimes fails. Something is triggering an extra fsync().
FAILED test/functional/core/fileio_spec.lua @ 52: fileio fsync() with 'nofsync' #8304
test/functional/core/fileio_spec.lua💯 Expected objects to be the same.
Passed in:
(number) 5
Expected:
(number) 4
Solution:
Relax the assertion.
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
The test for 'nofsync' swapfile preservation on a deadly signal, does
not actually assert anything.
followup to 1fd29a2884
Solution:
Check that swapfile contents are present after getting SIGTERM.
TODO: this doesn't really verify that 'fsync' was called; it still
passes with this patch:
diff --git a/src/nvim/main.c b/src/nvim/main.c
index 216e39f3e81c..7a635520401d 100644
--- a/src/nvim/main.c
+++ b/src/nvim/main.c
@@ -838,7 +838,7 @@ void preserve_exit(const char *errmsg)
if (errmsg != NULL) {
os_errmsg("Vim: preserving files...\r\n");
}
- ml_sync_all(false, false, true); // preserve all swap files
+ ml_sync_all(false, false, false); // preserve all swap files
break;
}
}
However it correctly fails with this patch, at least:
diff --git a/src/nvim/main.c b/src/nvim/main.c
index 216e39f3e81c..f2306c310ddc 100644
--- a/src/nvim/main.c
+++ b/src/nvim/main.c
@@ -838,7 +838,6 @@ void preserve_exit(const char *errmsg)
if (errmsg != NULL) {
os_errmsg("Vim: preserving files...\r\n");
}
- ml_sync_all(false, false, true); // preserve all swap files
break;
}
}
Problem: 'breakindent' is not drawn after diff filler lines.
Solution: Correct check for whether 'breakindent' should be drawn.
closes: vim/vim#13624588f20dece
Cherry-pick Test_diff_with_syntax() change from patch 9.0.1257.
Problem:
CI sometimes fails. Something is triggering an extra fsync().
FAILED test/functional/core/fileio_spec.lua @ 52: fileio fsync() codepaths #8304
test/functional/core/fileio_spec.lua:87: Expected objects to be the same.
Passed in:
(number) 3
Expected:
(number) 2
stack traceback:
test/functional/core/fileio_spec.lua:87: in function <test/functional/core/fileio_spec.lua:52>
Solution:
Relax the assertion to `fsync >= 2` instead of exactly 2.
(Note this is not a behavior change: the next assertion has always
checked `fsync == 4`, it's just that the intermediate 3rd fsync was
never explicitly asserted.)
Problem:
With vim.treesitter.foldexpr, `o`-ing two lines above a folded region
opens the fold. This does not happen with legacy foldexprs. For example,
make a markdown file with the following text (without indentation),
enable treesitter fold, and follow the instruction in the text.
put cursor on this line and type zoo<Esc>
initially folded, revealed by zo
# then this fold will be opened
initially folded, revealed by o<Esc>
Analysis:
* `o` updates folds first (done in `changed_lines`), evaluating
foldexpr, and then invokes `on_bytes` (done in `extmark_splice`).
* Treesitter fold allocates the foldinfo for added lines (`add_range`)
on `on_bytes`.
* Therefore, when treesitter foldexpr is invoked while running `o`, it
sees outdated foldinfo.
Solution:
`extmark_splice`, and then `changed_lines`. This seems to be the
standard order in other places, e.g., `nvim_buf_set_lines`.
PROBLEM: `vim.treesitter.get_node()` does not recognize the `lang` in
the option table. This option was used in somewhere else, for instance,
`vim.treesitter.dev` (for `inspect_tree`) but was never implemented.
SOLUTION: Make `get_node()` correctly use `opts.lang` when getting a
treesitter parser.
Problem: Wrong scrolling in Insert mode with 'smoothscroll' at the
bottom of the window.
Solution: Don't use set_topline() when 'smoothscroll' is set.
fixes: vim/vim#13612closes: vim/vim#136135b4d1fcbf0
Problem: Default color scheme is suboptimal.
Solution: Start using new color scheme. Introduce new `vim` color scheme
for opt-in backward compatibility.
------
Main design ideas
- Be "Neovim branded".
- Be minimal for 256 colors with a bit more shades for true colors.
- Be accessible through high enough contrast ratios.
- Be suitable for dark and light backgrounds via exchange of dark and
light palettes.
------
Palettes
- Have dark and light variants. Implemented through exporeted
`NvimDark*` and `NvimLight*` hex colors.
- Palettes have 4 shades of grey for UI elements and 6 colors (red,
yellow, green, cyan, blue, magenta).
- Actual values are computed procedurally in Oklch color space based on
a handful of hyperparameters.
- Each color has a 256 colors variant with perceptually closest color.
------
Highlight groups
Use:
- Grey shades for general UI according to their design.
- Bold text for keywords (`Statement` highlight group). This is an
important choice to increase accessibility for people with color
deficiencies, as it doesn't rely on actual color.
- Green for strings, `DiffAdd` (as background), `DiagnosticOk`, and some
minor text UI elements.
- Cyan as main syntax color, i.e. for function usage (`Function`
highlight group), `DiffText`, `DiagnosticInfo`, and some minor text UI
elements.
- Red to generally mean high user attention, i.e. errors; in particular
for `ErrorMsg`, `DiffDelete`, `DiagnosticError`.
- Yellow very sparingly only with true colors to mean mild user
attention, i.e. warnings. That is, `DiagnosticWarn` and `WarningMsg`.
- Blue very sparingly only with true colors as `DiagnosticHint` and some
additional important syntax group (like `Identifier`).
- Magenta very carefully (if at all).
------
Notes
- To make tests work without relatively larege updates, each one is
prepended with an equivalent of the call `:colorscheme vim`.
Plus some tests which spawn new Neovim instances also now use 'vim'
color scheme.
In some cases tests are updated to fit new default color scheme.
Problem: [security]: stack-buffer-overflow in option callback functions
Solution: pass size of errbuf down the call stack, use snprintf()
instead of sprintf()
We pass the error buffer down to the option callback functions, but in
some parts of the code, we simply use sprintf(buf) to write into the error
buffer, which can overflow.
So let's pass down the length of the error buffer and use sprintf(buf, size)
instead.
Reported by @henices, thanks!
b39b240c38
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in win-enter
Solution: validate window pointer before calling win_enter()
win_goto() may stop visual mode, if it is active. However, this may in
turn trigger the ModeChanged autocommand, which could potentially free
the wp pointer which was valid before now became stale and points to now
freed memory.
So before calling win_enter(), let's verify one more time, that the
wp pointer still points to a valid window structure.
Reported by @henices, thanks!
eec0c2b3a4
Co-authored-by: Christian Brabandt <cb@256bit.org>
This reverts commit fe30d8ccef.
The original commit intends to prevent heap-use-after-free with EXITFREE
caused by changedtick_di, which is no longer a problem.
Freeing buffers after freeing variables will cause heap-use-after-free
with EXITFREE when a partial is used as prompt callback.
Some escape sequences (in particular, OSC 52 paste responses) can be
very large, even unbounded in length. These can easily overflow
termkey's internal buffer. In order to process these long sequences,
dynamically grow termkey's internal buffer.
Problem: ml_get error when scrolling after delete
Solution: mark topline to be validated in main_loop
if it is larger than current buffers line
count
reset_lnums() is called after e.g. TextChanged autocommands and it may
accidentally cause curwin->w_topline to become invalid, e.g. if the
autocommand has deleted some lines.
So verify that curwin->w_topline points to a valid line and if not, mark
the window to have w_topline recalculated in main_loop() in
update_topline() after reset_lnums() returns.
fixes: vim/vim#13568fixes: vim/vim#13578c4ffeddfe5
The error doesn't happen in Nvim because Nvim triggers TextChanged after
calling update_topline().
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Signcolumn width does not increase when ranged sign does not
start at sentinel line.
Solution: Handle paired range of added sign when checking signcols.
decor->text.str pointer must go. This removes it for conceal char,
in preparation for a larger PR which will also handle the sign case.
By actually allowing composing chars for a conceal chars, this
becomes a feature and not just a refactor, as a bonus.
When parsing with a range, languagetree looks up injections and adds
them if needed. This explicitly invalidates parser, making `is_valid`
report `false` both when including and excluding children.
This is an attempt to describe desired behaviour of `is_valid` in tests,
with what ended up being a single line change to satisfy them.
Problem: File info disappears immediately when 'cmdheight' has just
decreased due to switching tabpage and 'shortmess' doesn't
contain 'o' or 'O'.
Solution: Make sure msg_row isn't smaller than cmdline_row.
fixes: vim/vim#13560closes: vim/vim#1356140ed6711bd
Problem: Unable to identify legacy signs when fetching extmarks with
`nvim_buf_get_extmarks()`.
Solution: Add "sign_name" to the extmark detail array.
Add some misc. changes as follow-up to #25724
Remove the monolithic Decoration struct. Before this change, each extmark
could either represent just a hl_id + priority value as a inline
decoration, or it would take a pointer to this monolitic 112 byte struct
which has to be allocated.
This change separates the decorations into two pieces: DecorSignHighlight
for signs, highlights and simple set-flag decorations (like spell,
ui-watched), and DecorVirtText for virtual text and lines.
The main separation here is whether they are expected to allocate more
memory. Currently this is not really true as sign text has to be an
allocated string, but the plan is to get rid of this eventually (it can
just be an array of two schar_T:s). Further refactors are expected to
improve the representation of each decoration kind individually. The
goal of this particular PR is to get things started by cutting the
Gordian knot which was the monolithic struct Decoration.
Now, each extmark can either contain chained indicies/pointers to
these kinds of objects, or it can fit a subset of DecorSignHighlight
inline.
The point of this change is not only to make decorations smaller in
memory. In fact, the main motivation is to later allow them to grow
_larger_, but on a dynamic, on demand fashion. As a simple example, it
would be possible to augment highlights to take a list of multiple
`hl_group`:s, which then would trivially map to a chain of multiple
DecorSignHighlight entries.
One small feature improvement included with this refactor itself, is
that the restriction that extmarks cannot be removed inside a decoration
provider has been lifted. These are instead safely lifetime extended
on a "to free" list until the current iteration of screen drawing is done.
NB: flags is a mess. but DecorLevel is useless, this slightly less so
Quick fix as follow up to https://github.com/neovim/neovim/pull/26108
kqueue only reports events on a watched folder itself, not for files
created or deleted within. So the approach the PR took doesn't work on FreeBSD.
We'll either need to bring back polling for it, combine watching with manual
file tracking, or disable LSP file watching on FreeBSD
Should help with https://github.com/neovim/neovim/issues/23291
On linux `new_fs_event` doesn't support recursive watching, but we can
still use it to watch folders.
The downside of this approach is that we may end up sending some false
`Deleted` events. For example, if you save a file named `foo` there will
be a intermediate `foo~` due to the save mechanism of neovim.
The events we get from vim.uv in that case are:
- rename: foo~
- rename: foo~
- rename: foo
- rename: foo
- change: foo
- change: foo
The mechanism in this PR uses a debounce to reduce this to:
- deleted: foo~
- changed: foo
`foo~` will be the false positive.
I suspect that for the LSP case this is good enough. If not, we may need
to follow up on this and keep a table in memory that tracks available
files.
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Problem: buffer-overflow in trunc_string()
Solution: Add NULL at end of buffer
Currently trunc_string() assumes that when the string is too long,
buf[e-1] will always be writeable. But that assumption may not always be
true. The condition currently looks like this
else if (e + 3 < buflen)
[...]
else
{
// can't fit in the "...", just truncate it
buf[e - 1] = NUL;
}
but this means, we may run into the last else clause with e still being
larger than buflen. So a buffer overflow occurs.
So instead of using `buf[e - 1]`, let's just always
truncate at `buf[buflen - 1]` which should always be writable.
3bd7fa12e1
vim-patch:9.0.2004: Missing test file
Problem: Missing test file
Solution: git-add the file to the repo
closes: vim/vim#13305d4afbdd071
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: FPE in adjust_plines_for_skipcol
Solution: don't divide by zero, return zero
Prevent a floating point exception when calculating w_skipcol (which can
happen with a small window when the number option is set and cpo+=n).
Add a test to verify
cb0b99f067
Co-authored-by: Christian Brabandt <cb@256bit.org>
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
libtermkey does not interpret OSC sequences that end with a BEL (0x07)
instead of an ST (0x1b 0x5c) terminator. This causes these tests to fail
since the OSC response is now parsed via libtermkey. Change the tests to
use the ST terminator to appease libtermkey.
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: vim/vim#13493closes: vim/vim#135249588666360
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Various things no6 properly tested.
Solution: Add various test cases. (Yegappan Lakshmanan, closesvim/vim#10259)
885de449c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
We already have an extensive suite of static analysis tools we use,
which causes a fair bit of redundancy as we get duplicate warnings. PVS
is also prone to give false warnings which creates a lot of work to
identify and disable.
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No way to have extmarks automatically removed when the range it
is attached to is deleted.
Solution: Add new 'invalidate' property that will hide a mark when the
entirety of its range is deleted. When "undo_restore" is set
to false, delete the mark from the buffer instead.
It is a design goal of extmarks that they allow precise tracking
of changes across undo/redo, including restore the exact positions
after a do/undo or undo/redo cycle. However this behavior is not useful
for all usecases. Many plugins won't keep marks around for long after
text changes, but uses them more like a cache until some external source
(like LSP semantic highlights) has fully updated to changed text and
then will explicitly readjust/replace extmarks as needed.
Add a "undo_restore" flag which is true by default (matches existing
behavior) but can be set to false to opt-out of this behavior.
Delete dead u_extmark_set() code.
Previously, 'rightleftcmd' was implemented by having all code which
would affect msg_col or output screen cells be conditional on `cmdmsg_rl`.
This change removes all that and instead implements rightleft as a
mirroring post-processing step.
connection from any channel or stdio will unblock
remote_ui_wait_for_attach. Wait on stdio only if
only —embed specified, if both —embed and
—listen then wait on any channel.
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: vim/vim#13367closes: vim/vim#133754bca4897a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
The prefix option of the diagnostic virtual text can be a function,
but previously it was only a function of diagnostic.
This function should also have additional parameters index and total,
more consistently and similarily as in the prefix function for
`vim.diagnostic.open_float()`.
These additional parameters will be useful when there are too many
number of diagnostics in a single line.
Fixes a regression from 5e5f5174e3
Until that commit we had a logic like this:
`local prefix = startbyte and line:sub(startbyte + 1) or line_to_cursor:sub(word_boundary)`
The commit changed the logic and no longer cut off the line at the cursor, resulting in a prefix that included trailing characters
Problem:
`win_get_bordertext_col` returns column < 1 for right or center
aligned text, if its length is more than window width.
Solution:
Return max(resulting_column, 1)
Fixes https://github.com/neovim/neovim/issues/25177
I initially wanted to split this into a refactor commit to make it more
testable, but it appears that already accidentally fixed the issue by
normalizing lnum/col to 0-indexing
`SREQ_*` values are now actual typedef'd enums. `get_option_value_strict()` has also been refactored and split into two functions, `get_option_attrs()` for getting the option attributes, and `get_option_value_strict()` for getting the actual value. Moreover, it now returns an `OptVal`. Other miscellaneous refactors have also been made.
Problem: Wrong color for half of wide character next to pum scrollbar.
Solution: Redraw the screen cell with the right color. (closesvim/vim#9874)
35d8c2010e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem:
The next command after `silent !{cmd}` or `silent lua print('str')`
prints an empty line before printing a message, because these commands
set `msg_didout = true` despite not printing any messages.
Solution:
Set `msg_didout = true` only if `msg_silent == 0`
Problem: Peeking and flushing output slows down execution.
Solution: Do not update the mode message when global_busy is set. Do not
flush when only peeking for a character. (Ken Takata)
cb574f4154
PROBLEM:
Currently `:echoerr` prints multi-line strings in a single line
as `:echom` does (Note: `:echon` can print multi-line strings well).
This makes stacktrace printed via echoerr difficult to read.
Example code:
try
lua error("lua stacktrace")
catch
echoerr v:exception
endtry
Output:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace^@stack traceback:^@^I[C]: in function 'error'^@^I[string ":lua"]:1: in main chunk
SOLUTION:
Allow echoerr to print multiline messages (e.g., lua exceptions),
because this command is usually used to print stacktraces.
Output after the fix:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace
stack traceback:
[C]: in function 'error'
[string ":lua"]:1: in main chunk
Problem: Vim9: in script cannot set item in uninitialized list.
Solution: When a list is NULL allocate an empty one. (closesvim/vim#8461)
e65081d1b5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Using fnameescape() for the path argument of findfile() and finddir() is
wrong, as fnameescape() is intended to be used for parts of Ex commands,
not function arguments.
"VimEnter foo" was accepted as a valid event name for "VimEnter".
Events delimited with commas, eg. "VimEnter,BufRead", were also
accepted, even though only the first event was actually parsed.
Co-authored-by: ii14 <ii14@users.noreply.github.com>
The 'arabicshape' feature of vim is a transformation of unicode text to
make arabic and some related scripts look better at display time. In
particular the content of a cell will be adjusted depending on the
(original) content of the cells just before and after it.
This is implemented by the arabic_shape() function in nvim. Before this
commit, shaping was invoked in four different contexts:
- when rendering buffer text in win_line()
- in line_putchar() for rendering virtual text
- as part of grid_line_puts, used by messages and statuslines and
similar
- as part of draw_cmdline() for drawing the cmdline
This replaces all these with a post-processing step in grid_put_linebuf(),
which has become the entry point for all text rendering after recent
refactors.
An aim of this is to make the handling of multibyte text yet simpler.
One of the main reasons multibyte chars needs to be "parsed" into
codepoint arrays of composing chars is so that these could be inspected
for the purpose of shaping. This can likely be vastly simplified in many
contexts where only the total length (in bytes) and width of composed
char is needed.
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
This finalizes the long running refactor from the old TUI-focused grid
implementation where text-drawing cursor was not separated from the
visible cursor.
Still, the pattern of setting cursor position together with updating a
line was convenient. Introduce grid_line_cursor_goto() to still allow
this but now being explicit about it.
Only having batched drawing functions makes code involving drawing
a bit longer. But it is better to be explicit, and this highlights
cases where multiple small redraws can be grouped together. This was the
case for most of the changed places (messages, lastline, and :intro)
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
msg_puts_display was more complex than necessary in nvim, as in
nvim, it no longer talks directly with a terminal.
In particular we don't need to scroll the grid before emiting the last
char. The TUI already takes care of things like that, for terminals
where it matters.
Problem: Visual highlight is inconsistent on a folded line with
treesitter foldtext.
Solution: Don't added Folded highlight as it is already in background.
The haskell-language-server supports resolve only for a subset of code
actions. For many code actions trying to resolve the `edit` property
results in an error, but the unresolved action already contains a
command that can be executed without issue.
The protocol specification is unfortunately a bit vague about this,
and what the haskell-language-server does seems to be valid.
Example:
newtype Dummy = Dummy Int
instance Num Dummy where
Triggering code actions on "Num Dummy" and choosing "Add placeholders
for all missing methods" resulted in:
-32601: No plugin enabled for SMethod_CodeActionResolve, potentially available: explicit-fields, importLens, hlint, overloaded-record-dot
With this change it will insert the missing methods:
instance Num Dummy where
(+) = _
(-) = _
(*) = _
negate = _
abs = _
signum = _
fromInteger = _
Problem:
NVIM_APPNAME does not allow path separators in the name, so relative
paths can't be used:
NVIM_APPNAME="neovim-configs/first-config" nvim
NVIM_APPNAME="neovim-configs/second-config" nvim
Solution:
Let NVIM_APPNAME be a relative path. Absolute paths are not supported.
fix#23056fix#24966
Problem: TextChanged does not trigger after TextChangedI.
Solution: Store the tick separately for TextChangedI. (Christian Brabandt,
closesvim/vim#8968, closesvim/vim#8932)
db3b44640d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
Some steps in :Tutor don't work on Windows.
Solution:
Add support for `{unix:...,win:...}` format and transform the Tutor contents
depending on the platform.
Fix https://github.com/neovim/neovim/issues/24166
Problem:
Crash from:
set cmdheight=0 redrawdebug=invalid
resize -1
Solution:
Do not invalidate first `p_ch` `msg_grid` rows in `update_screen` when
scrolling the screen down after displaying a message, because they may
be used later for drawing cmdline.
Fixes#22154
This is incorrect in the following scenario:
1. The language tree is Lua > Vim > Lua.
2. An edit simultaneously wipes out the `_regions` of all nodes, while
taking the Vim injection off-screen.
3. The Vim injection is not re-parsed, so the child Lua `_regions` is
still `nil`.
4. The child Lua is assumed, incorrectly, to occupy the whole document.
5. This causes the injections to be parsed again, resulting in Lua > Vim
> Lua > Vim.
6. Now, by the same process, Vim ends up with its range assumed over the
whole document. Now the parse is broken and results in broken
highlighting and poor performance.
It should be fine to instead treat an unparsed node as occupying
nothing (i.e. effectively non-existent). Since, either:
- The parent was just parsed, hence defining `_regions`
- The parent was not just parsed, in which case this node doesn't need
to be parsed either.
Also, the name `has_regions` is confusing; it seems to simply
mean the opposite of "root" or "full_document". However, this PR does
not touch it.
