When "q" is set in 'shortmess' it now fully hides the "recording @a" message
when you are recording a macro instead of just shortening to "recording". This
removes duplication when using reg_recording() in the statusline.
Related #19193
The motivation for this update is Issue #15365, where background=light
is not properly set for Nvim running from an Nvim :terminal. This can be
encountered when e.g., opening a terminal to make git commits, which
opens EDITOR=nvim in the nested terminal.
Under the implementation of this commit, the OSC response always
indicates a black or white foreground/background. While this may not
reflect the actual foreground/background color, it permits 'background'
to be retained for a nested Nvim instance running in the terminal
emulator. The behaviour matches Vim.
Problem: reloading colorscheme when not changing 'background'
Solution: Check, if the background option value actually changed,
if not, return early.
Only reload colorscheme when bg is changed
Currently the highlight groups are re-initialized and the colorscheme
(if any) is reloaded anytime 'background' is set, even if it is not
changed. This is unnecessary, because if the value was not changed then
there is no need to change highlight groups or do anything with the
colorscheme. Instead, only reload the colorscheme if the value of
'background' was actually changed.
closes: vim/vim#1370083ad2726ff
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem:
Bundled color schemes use `:hi clear` and only define Vim's highlight
groups. This results into Nvim-specific highlight groups using
definitions from Nvim's default color scheme, which are not always
linked to a Vim's highlight group.
Solution:
Restore links to Vim's highlight groups which were present before Nvim's
default color scheme update.
Currently, setting &bg at all re-initializes highlights and reloads
the active colorscheme, even if the actual value of &bg has not changed.
With https://github.com/neovim/neovim/pull/26595 this causes a
regression since &bg is set unconditionally based on the value detected
from the terminal.
Instead, only reload the colorscheme if the actual value of &bg has
changed.
Problem: Updating default color scheme produced some feedback.
Solution: Address the feedback.
Outline of the changes:
- Colors `Grey1` and `Grey2` are made a little bit more extreme (dark -
darker, light - lighter) to increase overall contrast.
- `gui` colors are treated as base with `cterm` colors falling back to
using 0-15 colors which come from terminal emulator.
- Update highlight group definition to not include attribute definition
if it is intended to staty uncolored.
- Tweak some specific highlight groups.
- Add a list of Neovim specific highlight groups which are now defined
differently in a breaking way.
- Minor tweaks in several other places related to default color scheme.
Enable 'termguicolors' automatically when Nvim can detect that truecolor
is supported by the host terminal.
If $COLORTERM is set to "truecolor" or "24bit", or the terminal's
terminfo entry contains capabilities for Tc, RGB, or setrgbf and
setrgbb, then we assume that the terminal supports truecolor. Otherwise,
the terminal is queried (using both XTGETTCAP and SGR + DECRQSS). If the
terminal's response to these queries (if any) indicates that it supports
truecolor, then 'termguicolors' is enabled.
Problem: Default color scheme is suboptimal.
Solution: Start using new color scheme. Introduce new `vim` color scheme
for opt-in backward compatibility.
------
Main design ideas
- Be "Neovim branded".
- Be minimal for 256 colors with a bit more shades for true colors.
- Be accessible through high enough contrast ratios.
- Be suitable for dark and light backgrounds via exchange of dark and
light palettes.
------
Palettes
- Have dark and light variants. Implemented through exporeted
`NvimDark*` and `NvimLight*` hex colors.
- Palettes have 4 shades of grey for UI elements and 6 colors (red,
yellow, green, cyan, blue, magenta).
- Actual values are computed procedurally in Oklch color space based on
a handful of hyperparameters.
- Each color has a 256 colors variant with perceptually closest color.
------
Highlight groups
Use:
- Grey shades for general UI according to their design.
- Bold text for keywords (`Statement` highlight group). This is an
important choice to increase accessibility for people with color
deficiencies, as it doesn't rely on actual color.
- Green for strings, `DiffAdd` (as background), `DiagnosticOk`, and some
minor text UI elements.
- Cyan as main syntax color, i.e. for function usage (`Function`
highlight group), `DiffText`, `DiagnosticInfo`, and some minor text UI
elements.
- Red to generally mean high user attention, i.e. errors; in particular
for `ErrorMsg`, `DiffDelete`, `DiagnosticError`.
- Yellow very sparingly only with true colors to mean mild user
attention, i.e. warnings. That is, `DiagnosticWarn` and `WarningMsg`.
- Blue very sparingly only with true colors as `DiagnosticHint` and some
additional important syntax group (like `Identifier`).
- Magenta very carefully (if at all).
------
Notes
- To make tests work without relatively larege updates, each one is
prepended with an equivalent of the call `:colorscheme vim`.
Plus some tests which spawn new Neovim instances also now use 'vim'
color scheme.
In some cases tests are updated to fit new default color scheme.
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
When the terminal emulator sends an OSC sequence to Nvim (as a response
to another OSC sequence that was first sent by Nvim), populate the OSC
sequence in the v:termresponse variable and fire the TermResponse event.
The escape sequence is also included in the "data" field of the
autocommand callback when the autocommand is defined in Lua.
This makes use of the already documented but unimplemented TermResponse
event. This event exists in Vim but is only fired when Vim receives a
primary device attributes response.
Fixes: https://github.com/neovim/neovim/issues/25856
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
A lot of updated places in the docs were already incorrect since long
since they did not reflect the default behaviour.
"[dos format]" could've been argued being better for discoverability
but that ship has already sailed as it is no longer displayed by default.
Oldtests clean up after themselves, and the options that need operators
to align with Vim all deny duplicates, so there is no need to set them
to default.
Also make the variable name that test_listchars.vim uses to align with
Vim more obvious.
Not everything needs to be crazy overconfigurable.
Also fixes a warning in latest clang which didn't approve of
the funky math switch statement in append_arg_number
Problem: SafeState may be triggered at the wrong moment.
Solution: Move it up higher to after where messages are processed. Add a
SafeStateAgain event to tigger there.
69198cb8c0
SafeStateAgain is N/A.
Move SafeState functions to state.c.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: '.-' no allowed in highlight group names
Solution: Allow dot and hyphen characters in highlight group names
Allow dots and hyphens in group names. There does not seem
to be any reason for these to be disallowed.
closes: vim/vim#12807d4376dc3eb
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: Temporarily changing current window in a script causes
CursorMoved to be triggerd.
Solution: Don't trigger CursorMoved if neither curwin nor cursor
changed between two checks.
Problem:
Nvim docs use "•" as a list item prefix but `gw{motion}` doesn't format
such lists by default.
Solution:
Change the 'comments' option to include "fb:•" by default.
Problem:
The parent commit added a new vim.get_visual_selection() function to
improve visual star. But that is redundant with vim.region(). Any
current limitations of vim.region() should be fixed instead of adding
a new function.
Solution:
Delete vim.get_visual_selection().
Use vim.region() to get the visual selection.
TODO: fails with visual "block" selections.
Problem:
Visual mode "*", "#" mappings don't work on text with "/", "\", "?", and
newlines.
Solution:
Get the visual selection and escape it as a search pattern.
Add functions vim.get_visual_selection and _search_for_visual_selection.
Fix#21676
