`GIT_REPOSITORY` will cause cmake to rebuild if local dependency
changes, which isn't the case for `URL`.
Also document how to test a different commits of a dependency.
Xcode does not allow having multiple targets depend on a custom command.
This limitation severely hinders its usability and complying with it
would likely require extensive refactoring and boilerplate. It makes
more sense to simply refer users to use "Ninja" or "Unix Makefiles"
instead.
Debugging dependencies is rare so a Debug build type is usually not
needed. In cases where it _is_ needed it is easy to rebuild in Debug
mode. But since Release builds are more common, it makes more sense as a
default.
For Neovim itself we stick with a Debug build as a default, since
rebuilding and debugging is done _much_ more frequently than with
dependencies (which we _mostly_ expect to "just work").
Also remove the CMAKE_BUILD_TYPE variable in the Makefile, since this is
set by default in CMake.
- Consistently use the variable CMAKE_BUILD_TYPE to select build type.
- Remove broken `doc_html` target.
- Remove swap files created by oldtest when cleaning.
- Only rerun `lintdoc` if any documentation files has changed.
Summary: Separate the lint job (`make lintdoc`) to validate runtime/doc,
it is no longer as a part of functionaltest (help_spec).
Build (cmake) and CI:
- `make lintdoc`: validate vimdoc files and test-generate HTML docs.
CI will run this as a part of the "docs" workflow.
- `scripts/lintdoc.lua` is added as an entry point (executable script)
for validating vimdoc files.
scripts/gen_help_html.lua:
- Move the tests for validating docs and generating HTMLs from
`help_spec.lua` to `gen_help_html`. Added:
- `gen_help_html.run_validate()`.
- `gen_help_html.test_gen()`.
- Do not hard-code `help_dir` to `build/runtime/doc`, but resolve from
`$VIMRUNTIME`. Therefore, the `make lintdoc` job will check doc files
on `./runtime/doc`, not on `./build/runtime/doc`.
- Add type annotations for gen_help_html.
- remove "ran-" prefix from touch files as it's redundant since the
they're already in the directory named `touches`.
- Include `contrib` when formatting with `make formatlua`.
- Use TARGET_FILE generator expression instead of assuming the
executable location.
- reuse logic that determines whether to use lua or luajit.
- add translations to the `nvim` target.
Makefile improvements:
- rename variable `CMAKE_PRG` to `CMAKE` to make it more consistent with
the builtin `MAKE` variable.
- stop propagating flags to generator. Users should use cmake for
non-standard use cases.
- remove `+` prefix from targets. If the user for whatever reason wants
to dry-run a target then they should be able to.
This distinction is important for correct dependency management, as the
nvim binary is used to create some runtime files. The nvim binary (and
the target to build it) is thus called `nvim_bin` and the target to
build all of nvim (binary+runtime) is called `nvim`.
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable stylua for entire `test/` directory.
- Exclude these high-churn files until this issue is resolved: https://github.com/JohnnyMorganz/StyLua/issues/829
```
test/functional/ui/decorations_spec.lua | 3560 ++++++++++++++++++++++++++++++++++++----------------
test/functional/ui/float_spec.lua | 5826 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/multigrid_spec.lua | 1349 ++++++++++++++------
```
- Make surgical changes to these files (or add `stylua: ignore` in some
small scopes) to improve the result:
```
test/functional/vimscript/msgpack_functions_spec.lua | 1414 +++++++++++++++------
test/functional/api/buffer_spec.lua | 1389 +++++++++++----------
test/functional/api/vim_spec.lua | 2740 +++++++++++++++++++++++-----------------
```
- These "high churn" files are NOT excluded because the changes are
largely an improvement:
```
test/functional/plugin/lsp_spec.lua | 2198 ++++++++++++++++++---------------
test/functional/plugin/shada_spec.lua | 4078 +++++++++++++++++++++++++++++++++++-------------------------
test/functional/ui/cmdline_spec.lua | 1199 +++++++++++-------
test/functional/ui/popupmenu_spec.lua | 1267 +++++++++++--------
test/functional/ui/messages_spec.lua | 1643 +++++++++++++++---------
```
- TODO: how to check "all directories"? With `GLOB_DIRS *` and `/.deps/` (or
`.deps/`) in `.styluaignore`, Lua code in `.deps/` is still checked...
- Use `#pragma once` for `cmake.config/config.h.in`
- Remove unused variable `CACHED_GENERATED_DIR`
- Reorganize and sort variables
- Introduce `STYLUA_DIRS` variable to ensure the `formatlua` and
`lintlua-stylua` operates on the same files.
- Adjust variable scope to avoid using hacky directory properties.
- Add more necessary runtime files as test dependencies
The releases doesn't work on intel mac as libintl isn't available on the system
by default. This makes `:language` not work for the shipped macos releases,
though the reduction in build system complexity most likely outweighs that.
- add EXTERNALPROJECT_OPTIONS variable to main build
- use `REQUIRED` keyword for IWYU.
- remove check_c_compiler_flag checks when `ENABLE_COMPILER_SUGGESTIONS`
is `ON`. If we explicitly enable it then we probably want it to give
an error if it doesn't exist, rather than silently skip it.
- Move dependency interface libraries to their find module and use them
as a pseudo-imported target.
- Remove BUSTED_OUTPUT_TYPE. It's not used and we can reintroduce it
again if something similar is needed.
- Use LINK_OPTIONS intead of LINK_FLAGS when generating the `--version`
output.
The benefits are primarily being able to use FetchContent, which allows
for a more flexible dependency handling. Other various quality-of-life
features such as `-B` and `-S` flags are also included.
This also removes broken `--version` generation as it does not work for
version 3.10 and 3.11 due to the `JOIN` generator expression.
Reference: https://github.com/neovim/neovim/issues/24004
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable lintlua for `test/unit/` directory.
- TODO: only `test/functional/` remains unchecked.
previous: 45fe4d11ad
previous: 517f0cc634
Problem:
Not all Lua code is checked by stylua. Automating code-style is an
important mechanism for reducing time spent on accidental
(non-essential) complexity.
Solution:
- Enable lintlua for `src/` directory.
followup to 517f0cc634
Problem:
We don't enable stylua for many Lua scripts. Automating code-style is an
important tool for reducing time spent on accidental (non-essential)
complexity.
Solution:
- Enable lintlua for `scripts/` directory.
- Specify `call_parentheses = "Input"`, we should allow kwargs-style
function invocations.
This will ensure that we can pass flags and make adjustments from the
top level cmake file instead of digging through the cmake directory.
More importantly, this will only format files that have been changed.
This has a slightly higher initial cost compared to previous solution as
all files must be initially formatted, but the gained speed up should
more than make up for it quickly.
`make formatlua` is always run due to a quirk of stylua of always changing
modification time of the file regardless if there were any changes. This is not
a major blocker as stylua is very fast.
- Correct MSVC warning suppression. The C4003 warning is issued during
file generation and not for the actual source files.
- Remove non-existent "scripts/pvscheck.sh" file from `lintsh` target.
- Remove spaces inside for loops with uncrustify.
- Point dependencies to use a git tag rather than releases, as releases
might have changes that deviate from the actual source code.
- Automatically update uncrustify config before formatting or linting.
This allow distributions and other interested parties to use a system
busted rather than the on neovim bundles by passing the
-D USE_BUNDLED_BUSTED=ON flag to cmake when building.
Closes https://github.com/neovim/neovim/issues/23814.
It is enabled with ENABLE_ASAN_UBSAN like other compilers. Technically
it only enables ASAN as UBSAN is not available, meaning to make the
variable names fully correct we'd need to separate it into two checks:
ENABLE_ASAN and ENABLE_UBSAN, but the convenience of combining them into
the same flag outweighs the theoretical correctness.
Also note in CONTRIBUTING.md that debug builds in ASAN is not supported.
Technically it is the debug runtime that is not supported, which cmake
automatically enables when using the debug build type. However, neovim
can't be built with debug builds without linking to the debug runtime
since the third party libraries has likely been linked to the debug
runtime if it was built with debug build type. This technicality is
likely uninteresting to the potential developer and it's easier to just
say to use a release build type.
- silence false warnings on MSVC
- merge `clang-tidy` cmake target into `lintc` and remove the
corresponding make target
- use cmake's built-in endianness detection
Ensure bundled libraries and include directories are always searched
first before any others. This will provide a more consistent experience
as the search order of the builtin find_ functions can vary depending on
system. This should make the build process faster when building with
bundled deps as we limit the search to only the .deps directory.
Separating the search between .deps and everything makes debugging
find_-related problems simpler if you need to check how dependencies are
found.
For libraries, we divide the search process into the following order:
1. Only search in .deps directory and only search for static libraries.
2. Only search in .deps directory and search for all libraries.
3. Search everywhere and search for all libraries.
Make an exception for FindLibintl.cmake as changing the search order
seems to break some tests on macos.
add_glob_target is our custom method to figure out whether a work needs
to be done or not. This works as expected most of the time, but causes a
problem with stylua.
Stylua makes the decision that if a file is explicitly passed to be
formatted, then it will format the file even if the file is set to be
ignored in .styluaignore. This behavior breaks add_glob_target with
seemingly no easy workaround.
More information: https://github.com/JohnnyMorganz/StyLua/issues/751
Instead, what we can do is call stylua as you would in the command line.
This will make stylua work as expected. The downside is that we no
longer get a free "is this work necessary" detection, meaning that
stylua will be run each time `make lint` is called, regardless if it's
necessary or not. For longer lint tasks such as uncrustify and
clang-tidy this would be disastrous, but this is an acceptable tradeoff
since stylua is very quick.
- simplify lua interpreter search
- fix incorrect variable name in BuildLua.cmake
- build PUC Lua with -O2
- silence non-mandatory find_package search for libuv
- simplify Find modules
- Prefer using the explicitly set CI_BUILD over relying on the
environment variable "CI".
Downloading the necessary files all at once instead of doing dependency
handling with luarocks speeds up installation immensely. We speed up the
process even more by using luv as a replacement for the C modules in the
busted dependencies, which allows us to skip costly compilation times.
Co-authored-by: bfredl <bjorn.linse@gmail.com>
* docs(options): take ownership of options.txt
- `src/nvim/options.lua` is now the source of truth
- generate runtime/lua/vim/_meta/options.lua
* fixup! zeer comments
* fixup! zeer comments (2)
* fixup! re-enable luacheck
* fixup! regen
This will abort if lint programs are not found, and is meant primarily
for the lint job in CI. Supersedes the REQUIRED argument in
add_glob_target as it's a superior replacement by being a built-in
solution.
Neovim QT was originally bundled on Windows as a response to the then
lackluster terminal options. The situation has dramatically changed,
with viable options such as Windows terminal, Alacritty and Wezterm to
name a few. The Windows build no longer needs this special treatment for
neovim to be usable.
Pros:
- Release builds will be smaller.
- Less maintenance burden.
- Clearer separation of responsibility (neovim issues go to the neovim
repo and neovim-qt issues to the neovim-qt repo).
- More consistent treatment between platforms.
Cons:
- Users who've come to expect neovim-qt to be bundled with nvim will
need to adjust and download neovim-qt from
https://github.com/equalsraf/neovim-qt instead.
- Similarly, build scripts will need to be adjusted to reflect this
change.
Closes https://github.com/neovim/neovim/issues/21209.
Its usecase is too specific to warrant an option. The same effect can be
achieved by passing `-DCMAKE_C_FLAGS=-DNVIM_LOG_DEBUG` in the command
line when building neovim.
Uncrustify is sensitive to version changes, which causes friction for
contributors that doesn't have that exact version. It's also simpler to
download and install the correct version than to have bespoke version
checking.
- Simplify error checking when using execute_process.
- Set BUILD_SHARED_LIBS to OFF when building dependencies.
This is normally not needed, but msgpack interprets an unset
BUILD_SHARED_LIBS to build a shared library, which is the opposite of
the cmake behavior.
- Move function check_lua_module to Util.cmake.
- Remove unnecessary code.
- Make variable naming more consistent
This will prevent situations where the linting works on CI but not
locally, at the cost of increased CI time.
Also manually ignore `runtime/vim/lua/re.lua`, as the .styluaignore
isn't respected when specifying a file instead of a directory.
