Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: vim/vim#13320bd734c3bea
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: vim/vim#12230closes: vim/vim#1297169fb5afb3b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: vim/vim#13228closes: vim/vim#13243dd75fcfbdf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: vim/vim#133164a82bdfaa8
Co-authored-by: Martin Tournoij <martin@arp242.net>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: test: undofile left behind
Solution: cleanup undofile
fix: tmp file not deleted when running make test_undo
Temporary file `.Xtestfile.txt.un~` was left running `make test_undo`
and vim was configured with:
```
./configure --with-features=normal --enable-gui=no --enable-terminal
```
closes: vim/vim#13304b07b9dc4da
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: vim/vim#13219closes: vim/vim#132108e5f26ec6a
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: vim/vim#132560583491277
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: vim/vim#13249closes: vim/vim#132376d11347260
N/A patch:
vim-patch:9.0.1976: style: space before tab in optionstr.c
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: win32: missing '**' expansion test (after v9.0.1947)
Solution: Add test for MS-Windows
win32: Add "**" test
Vim supports "**" on MS-Windows. However, it is not tested by
`Test_glob_extended_bash`.
Unlike Unix, it doesn't use 'shell' and doesn't support {,} expansion.
So, I added as a separate test.
related: vim/vim#13205closes: vim/vim#132504a1ad55564
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: vim/vim#132246ee7b521fa
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Cmdline completion for 'listchars' fields doesn't include
"multispace" and "leadmultispace" (after 9.0.1958).
Solution: Include "multispace" and "leadmultispace" in lcstab.
closes: vim/vim#132251f025b01e2
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: vim/vim#13182900894b09a
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Configure script may not detect xattr correctly
Solution: include sys/xattr instead of attr/xattr,
make Test_write_with_xattr_support() test
xattr feature correctly
This also applies to the Smack security feature, so change the include
and configure script for it as well.
closes: vim/vim#132296de4e58cf2
Problem: No support for writing extended attributes
Solution: Add extended attribute support for linux
It's been a long standing issue, that if you write a file with extended
attributes and backupcopy is set to no, the file will loose the extended
attributes.
So this patch adds support for retrieving the extended attributes and
copying it to the new file. It currently only works on linux, mainly
because I don't know the different APIs for other systems (BSD, MacOSX and
Solaris). On linux, this should be supported since Kernel 2.4 or
something, so this should be pretty safe to use now.
Enable the extended attribute support with normal builds.
I also added it explicitly to the :version output as well as make it
able to check using `:echo has("xattr")`, to have users easily check
that this is available.
In contrast to the similar support for SELINUX and SMACK support (which
also internally uses extended attributes), I have made this a FEAT_XATTR
define, instead of the similar HAVE_XATTR.
Add a test and change CI to include relevant packages so that CI can
test that extended attributes are correctly written.
closes: vim/vim#306closes: vim/vim#13203e085dfda5d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Custom cmdline completion skips original cmdline when pressing
Ctrl-P at first match if completion function invokes glob().
Solution: Move orig_save into struct expand_T.
closes: vim/vim#1321628a23602e8
Problem: Vim9: error codes spread out
Solution: group them together and reserve 100
more for future use
Reserve 100 error codes for future enhancements to the Vim9 class
support
closes: vim/vim#13207413f83990f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Bash Expansion test fails on Windows/MacOS
Solution: Disable Test_glob_extended_bash for now
This test doesn't work on Windows even if bash can be executed, since
the globstar functionality has only been enabled in Unix builds of Vim
(Commit 9eb1ce531527a7177d16373b0f8689bbcd3d5f73, patch 9.0.1946).
closes: vim/vim#1320503ca4002c1
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: filename expansion using ** in bash may fail
Solution: Try to enable the globstar setting
Starting with bash 4.0 it supports extended globbing using the globstar
shell option. This makes matching recursively below a certain directory
using the ** pattern work as expected nowadays. However, we need to
explicitly enable this using the 'shopt -s globstar' bash command.
So let's check the bash environment variable $BASH_VERSINFO (which is
supported since bash 3.0 and conditionally enable the globstar option,
if the major version is at least 4. For older bashs, this at least
shouldn't cause errors (unless one is using really ancient bash 2.X or
something).
closes: vim/vim#13002closes: vim/vim#131449eb1ce5315
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: CursorHoldI event interferes with "CTRL-G U". (Naohiro Ono)
Solution: Restore the flag for "CTRL-G U" after triggering CursorHoldI.
(closesvim/vim#8937)
5a9357d0bf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: TextChanged does not trigger after TextChangedI.
Solution: Store the tick separately for TextChangedI. (Christian Brabandt,
closesvim/vim#8968, closesvim/vim#8932)
db3b44640d
Co-authored-by: Christian Brabandt <cb@256bit.org>
This was only used to avoid the effect of SHM_OVERALL. This can easily
be handled in isolation, instead of clearing out all of 'shortmess' which
has unwanted side effects and mystifies what really is going on.
Problem: multispace wrong when scrolling horizontally
Solution: Update position in "multispace" or "leadmultispace" also in
skipped chars. Reorder conditions to be more consistent.
closes: vim/vim#13145closes: vim/vim#13147abc808112e
Problem: missing test for mouse click + 'virtedit'
Solution: Add test for clicking after eol with 'virtualedit' and wrapped
line
closes: vim/vim#1315746a0582ffa
Problem: :bwipe fails after switching window from aucmd_win.
Solution: Decrement b_nwindows after switching back to aucmd_win.
closes: vim/vim#1316046bdae036a
Problem: make test_compilers fails on ubuntu
Solution: set LC_ALL=C
fix: make test_compiler failed on xubuntu 22.04.3
Problem: 'make test_compiler' failed on Linux xubuntu 22.04.3 but
succeeded on e.g. macOS. To reproduce:
```
$ ./configure --with-features=huge --enable-gui=no --enable-perlinterp=yes
$ make -j12
$ cd vim/src/testdir
$ make test_compiler
...snip...
Found errors in Test_compiler():
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 24: command did not fail: clist
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 30: Pattern '\\n \\d\\+ Xfoo.pl:3: Global symbol "$foo" requires explicit package name' does not match '\n19 Xfoo.pl:3: Global symbol "$foo" requires explicit package name (did you forget to declare "my $foo"?)'
make: *** [Makefile:70: test_compiler] Error 1
```
Solution: set `LC_ALL` to "C" in `Test_compiler()`
closes: vim/vim#13173ca0ffc0d63
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Oldtests clean up after themselves, and the options that need operators
to align with Vim all deny duplicates, so there is no need to set them
to default.
Also make the variable name that test_listchars.vim uses to align with
Vim more obvious.
Problem: :unhide does not check for failing to close a window.
Solution: When closing a window fails continue with the next one. Do not
try closing the autocmd window. (closesvim/vim#9984)
6f2465d336
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Wrong curswant when clicking on empty line or with vsplits.
Solution: Don't check for ScreenCols[] before the start of the window
and handle empty line properly.
closes: vim/vim#1313203cd697d63
patch 9.0.1918: No filetype detection for Authzed filetypes
Problem: No filetype detection for Authzed filetypes
Solution: Detect the *.zed file extension as authzed filetype
closes: vim/vim#131295790a54166
Co-authored-by: Matt Polzin <mpolzin@workwithopal.com>
Problem: r_CTRL-C works differently in visual mode
Solution: Make r_CTRL-C behave consistent in visual mode
in terminal and Windows GUI
in visual mode, r CTRL-C behaves strange in Unix like environments. It
seems to end visual mode, but still is waiting for few more chars,
however it never seems to replace it by any characters and eventually
just returns back into normal mode.
In contrast in Windows GUI mode, r_CTRL-C replaces in the selected area
all characters by a literal CTRL-C.
Not sure why it behaves like this. It seems in the Windows GUI, got_int
is not set and therefore behaves as if any other normal character has
been pressed.
So remove the special casing of what happens when got_int is set and
make it always behave like in Windows GUI mode. Add a test to verify it
always behaves like replacing in the selected area each selected
character by a literal CTRL-C.
closes: vim/vim#13091closes: vim/vim#13112476733f3d0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No runtime support for Mojo
Solution: Add basic filetype and syntax plugins
closes: vim/vim#13062closes: vim/vim#130630ce2c594d0
Co-authored-by: Mahmoud Abduljawad <mahmoud@masaar.com>
Problem: Various Typos
Solution: Fix Typos
This is a collection of typo related commits.
closes: vim/vim#12753closes: vim/vim#13016ee17b6f70d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Co-authored-by: nuid64 <lvkuzvesov@proton.me>
Co-authored-by: Meng Xiangzhuo <aumo@foxmail.com>
Co-authored-by: Dominique Pellé <dominique.pelle@gmail.com>
Problem: missing test for patch 9.0.1873
Solution: add a test trying to exchange windows
Add a test, making sure that switching windows is not allowed when
textlock is active, e.g. when running `:s/<pat>/\=func()/`
18d2709aa1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: CI may fail in test_recover_empty_swap
Solution: Set directory option
Fix failing Test_recover_empty_swap test
:recover by default not only looks in the current directory, but also in
~/tmp for files to recover. If it finds some files to recover, it will
interactively prompt for a file to recover. However, prompting doesn't
work when running the test suite (and even if it would, there is no one
that can answer the prompt).
So it doesn't really make sense during testing, to inspect different
directories for swap files and prompt and wait (which will lead to a
timeout and therefore a failing test).
So set the 'directory' option temporarily to the current directory only
and reset it back once the test finishes.
closes: vim/vim#130381c7397f3f1
Co-authored-by: Christian Brabandt <cb@256bit.org>
