Problem: filetype: lf config files are not recognized
Solution: detect lfrc files as lf filetype, include a syntax
script for lf files (Andis Spriņķis).
References:
- https://github.com/gokcehan/lfcloses: vim/vim#158590f146b7925
Co-authored-by: Andis Spriņķis <spr.andis@protonmail.com>
Now that #16425 is fixed, use Unicode again to reduce screen height.
Unfortunately composing chars still can't be used, as it turns out that
composing chars may be missing when sent separately from the base char
at the last char a screen line.
Problem: Simplify() does not remove slashes from "///path".
Solution: Reduce > 2 slashes to one. (closesvim/vim#6263)
fdcbe3c3fe
Omit Test_readdirex() change: changed again in patch 9.0.0323.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: tests: not enough tests for setting options
Solution: Add more comprehensive tests to test_options (Milly).
closes: vim/vim#15856484facebe4
Restore behavior of &l:option for unset local boolean options that was
accidentally changed in #26429.
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: filetype: Some upstream php files are not recognized
Solution: Detect more config files from the PHP source
distribution as filetype ini (nisbet-hubbard).
closes: vim/vim#15840367499c5c3
Co-authored-by: nisbet-hubbard <87453615+nisbet-hubbard@users.noreply.github.com>
Problem: test_strftime may fail because of missing TZ data
Solution: Use GMT offsets to validate timezone differences (James McCoy)
Some systems only provide timezones that follow the geographical region
naming (e.g. America/New_York) by default and require an additional
install for other names (like EST).
The GMT+<offset> format must always be honored, so use that to generate
distinct data for the test.
closes: vim/vim#15848ea997edc7a
Co-authored-by: James McCoy <jamessan@jamessan.com>
**Problem:** Tree-sitter 0.24.0 introduced a new symbol type to denote
supertype nodes (`TSSymbolTypeSupertype`). Now, `language.inspect()`
(and the query `omnifunc`) return supertype symbols, but with double
quotes around them.
**Solution:** Mark a symbol as "named" based on it *not* being an
anonymous node, rather than checking that it is a regular node (which a
supertype also is not).
**Problems:**
- `vim.treesitter.language.inspect()` returns duplicate
symbol names, sometimes up to 6 of one kind in the case of `markdown`
- The list-like `symbols` table can have holes and is thus not even a
valid msgpack table anyway, mentioned in a test
**Solution:** Return symbols as a map, rather than a list, where field
names are the names of the symbol. The boolean value associated with the
field encodes whether or not the symbol is named.
Note that anonymous nodes are surrounded with double quotes (`"`) to
prevent potential collisions with named counterparts that have the same
identifier.
This commit also marks `child_containing_descendant()` as deprecated
(per upstream's documentation), and uses `child_with_descendant()` in
its place. Minimum required tree-sitter version will now be `0.24`.
Problem: filetype: some Apache files are not recognized
Solution: Detect more config files from the Apache source
distribution as filetype apache (nisbet-hubbard)
closes: vim/vim#15810e58e9015cc
Co-authored-by: nisbet-hubbard <87453615+nisbet-hubbard@users.noreply.github.com>
Problem:
Using a single RPC request to child server isn't enough to prevent race
between nvim_paste and nvim_input.
Solution:
Ensure both child client and child server have processed pending events
by sending an empty DCS response to the child client and waiting for
TermResponse autocommand on the child server.
Problem: on `CompleteDone` cursor can jump to the end of line instead of
the end of the completed word.
Solution: remove only inserted word for snippet expansion instead of everything
until eol.
Fixes#30656
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Currently completion attribute hl_group is combined with
all items, which is redundant and confusing with kind_hlgroup
Solution: Renamed to abbr_hlgroup and combine it only with the abbr item
(glepnir).
closes: vim/vim#158180fe17f8ffb
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: current command completion is a bit limited
Solution: Add the shellcmdline completion type and getmdcomplpat()
function (Ruslan Russkikh).
closes: vim/vim#158230407d621bb
Co-authored-by: Ruslan Russkikh <dvrussk@yandex.ru>
Problem: A cmdlen == 0 condition is always true as ccline.cmdlen == 0
was already checked above (after v9.1.0766).
Solution: Remove the condition and the variable.
(zeertzjq)
closes: vim/vim#15830c9aa6e4f2a
Problem: No test for patches 6.2.418 and 7.3.489
Solution: Add a test. Fix some whitespace problems in test_mapping.vim.
Document the behavior (zeertzjq).
closes: vim/vim#158155df3cb2898
Problem: [security]: use-after-free when closing a buffer
Solution: When splitting the window and editing a new buffer,
check whether the newly to be edited buffer has been marked
for deletion and abort in this case
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-rj48-v4mq-j4vg51b62387be
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: :cd completion fails on Windows with backslash in path
Solution: switch no_bslash argument to FALSE in file_pat_to_reg_pat()
Note: only fixes the problem on Windows. For Unix, we still need to
escape backslashes since those are taken as regex atoms (and could be
invalid regex atoms).
fixes: vim/vim#15643closes: vim/vim#158081a31c430bb
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
- Some servers like LuaLS add unwanted blank lines after multiline
`@param` description.
- List items do not wrap nicely.
Solution:
- When rendering the LSP doc hover, remove blank lines in each `@param`
or `@return`.
- But ensure exactly one empty line before each.
- Set 'breakindent'.
Problem: Cannot build against Ruby 33 dynamically
Solution: Ruby 33 removed transient heap, so do not use
rb_ary_transient anymore, NoMethodError format changed,
so update test for expected error message
(Isao Sato)
- ruby-3.3 removed transient heap for ruby/dyn
when +ruby/dyn with ruby-3.3 do command :ruby, E448 occur.
ruby-3.3 has no transient heap anymore, so disable rb_ary_transient etc.
$ LC_ALL=C VIMRUNTIME=runtime ./src/vim -u NONE -c 'ruby puts RUBY_VERSION'
"=> Error detected while processing command line:
"=> E448: Could not load library function rb_ary_detransient
"=> E266: Sorry, this command is disabled, the Ruby library could not be
loaded.
- ruby-3.3 changed NoMethodError format:
$ rvm 3.2.2, 3.3.0-rc1 do ruby -e 'begin; nil.name; rescue => e; puts "%s : %s"%[RUBY_VERSION, e.message]; end '
=> 3.2.2 : undefined method `name' for nil:NilClass
=> 3.3.0 : undefined method `name' for nil
so loose pattern in Test_ruby_Vim_buffer_get()
closes: vim/vim#13741443657b32b
Co-authored-by: Isao Sato <svardew@gmail.com>
Problem: screenpos() may return invalid position
after switching buffers (Greg Hurrell)
Solution: reset w_leftcol if wrapping has been set
after copying wrap option
fixes: vim/vim#15792closes: vim/vim#15803b065a10e24
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Lua accessors for
- global, local, and special variables (`vim.{g,t,w,b,v}.*`), and
- options (`vim.{o,bo,wo,opt,opt_local,opt_global}.*`),
do not have command-line completion, unlike their vimscript counterparts
(e.g., `g:`, `b:`, `:set`, `:setlocal`, `:call <fn>`, etc.).
Completion for vimscript functions (`vim.fn.*`) is incomplete and does
not list all the available functions.
Solution: Implement completion for vimscript function, variable and
option accessors in `vim._expand_pat` through:
- `getcompletion()` for variable and vimscript function accessors, and
- `nvim_get_all_options_info()` for option accessors.
Note/Remark:
- Short names for options are yet to be implemented.
- Completions for accessors with handles (e.g. `vim.b[0]`, `vim.wo[0]`)
are also yet to be implemented, and are left as future work, which
involves some refactoring of options.
- For performance reasons, we may want to introduce caching for
completing options, but this is not considered at this time since the
number of the available options is not very big (only ~350) and Lua
completion for option accessors appears to be pretty fast.
- Can we have a more "general" framework for customizing completions?
In the future, we may want to improve the implementation by moving the
core logic for generating completion candidates to each accessor (or
its metatable) or through some central interface, rather than writing
all the accessor-specific completion implementations in a single
function: `vim._expand_pat`.
An implication of this current approach is that `NVIM_API_LEVEL` should be
bumped when a new Lua function is added.
TODO(future): add a lint check which requires `@since` on all new functions.
ref #25416
Some composite/compound types even as basic as `(string|number)[]` are
not currently supported by the luacats LPEG grammar used by gen_vimdoc.
It would be parsed & rendered as just `string|number`.
Changeset adds better support for these types.
Problem: quickfix list does not handle hardlinks well
Solution: store original file name with quickfix entry
(Austin Chang)
Quickfix list shows entries with duplicate name if the file is opened
with the path of hard links.
The major cause is that qflist assumed that the filename passed into
`qf_add_entry` matches the filename opened with the buffer.
This patch handles this case by introduce a `qf_fname` into `qfline_S`
structure. It stores the filename from `qf_add_entry` for each quickfix
line.
closes: vim/vim#156872982299699
Co-authored-by: Austin Chang <austin880625@gmail.com>
Ensure the screen is fully updated before blocking for input. This did
not always happen before, for example when setting `cursorline
scrolloff=9999`, which lead to jerky movement when using some GUI
applications.
Because of the duality of redraw_later, this can't be done in
command-line or when waiting for "Press ENTER". In many of those cases
the redraw is expected AFTER the key press, while normally it should
update the screen immediately. So, those special cases are excluded.
Problem: fixed order of items in insert-mode completion menu
Solution: Introduce the 'completeitemalign' option with default
value "abbr,kind,menu" (glepnir).
Adding an new option `completeitemalign` abbr is `cia` to custom
the complete-item order in popupmenu.
closes: vim/vim#14006closes: vim/vim#157606a89c94a9e
Problem:
The `_watch.watch()` strategy may fail if the given path does not exist:
…/vim/_watch.lua:101: ENOENT: no such file or directory
stack traceback:
[C]: in function 'assert'
…/vim/_watch.lua:101: in function <…/vim/_watch.lua:61>
[string "<nvim>"]:5: in main chunk
- `_watch.watch()` actively asserts any error returned by `handle:start()`.
- whereas `_watch.watchdirs()` just ignores the result of `root_handle:start()`.
Servers may send "client/registerCapability" with "workspace/didChangeWatchedFiles"
item(s) (`baseUri`) which do not actually exist on the filesystem:
https://github.com/neovim/neovim/issues/28058#issuecomment-2189929424
{
method = "client/registerCapability",
params = {
registrations = { {
method = "workspace/didChangeWatchedFiles",
registerOptions = {
watchers = { {
globPattern = {
baseUri = "file:///Users/does/not/exist",
pattern = "**/*.{ts,js,mts,mjs,cjs,cts,json,svelte}"
}
},
...
}
Solution:
- Remove the assert in `_watch.watch()`.
- Show a once-only message for both cases.
- More detailed logging is blocked until we have `nvim_log` / `vim.log`.
fix#28058
Problem: Wrong display when typing in diff mode with 'smoothscroll'.
Solution: Use adjust_plines_for_skipcol() (zeertzjq).
closes: vim/vim#1577647f8584a80
Problem:
Linematch used to use strchr to navigate a string, however strchr does
not supoprt embedded NULs.
Solution:
Use `mmfile_t` instead of `char *` in linematch and introduce `strnchr()`.
Also remove heap allocations from `matching_char_iwhite()`
Fixes: #30505
Problem: No clear way to check whether parsers are available for a given
language.
Solution: Make `language.add()` return `true` if a parser was
successfully added and `nil` otherwise. Use explicit `assert` instead of
relying on thrown errors.
Problem: filetype: bun and deno history files not recognized
Solution: detect '.bun_repl_history' and 'deno_history.txt' as
javascript filetype (Wu, Zhenyu)
closes: vim/vim#157618a2aea8a62
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: Test_halfpage_longline() fails on large terminals
(lazypingu)
Solution: Use a window with known width (zeertzjq).
fixes: vim/vim#15755closes: vim/vim#15756fa117387ee
Problem:
Headings in :help do not stand out visually.
Solution:
Define a non-standard `@markup.heading.1.delimiter` group and
special-case it in `highlight_group.c`.
FUTURE:
This is a cheap workaround until we have #25718 which will enable:
- fully driven by `vimdoc/highlights.scm` instead of using highlight
tricks (`guibg=bg guifg=bg guisp=fg`)
- better support of "cterm" ('notermguicolors')
Problem: diff mode does not handle overlapping diffs correctly
Solution: correct the logic to handle overlapping blocks
(Yukihiro Nakadaira)
Vim merges overlapped diff blocks and it doesn't work expectedly
in some situation.
closes: vim/vim#1573506fe70c183
Co-authored-by: Yukihiro Nakadaira <yukihiro.nakadaira@gmail.com>
Problem:
checkhealth report sections are not visually separated.
Solution:
Highlight with "reverse".
TODO: migrate checkhealth filetype to use treesitter.
TODO: default :help should also highlight headings more boldy!
Problem: getcmdprompt() implementation can be improved
Solution: Improve and simplify it (h-east)
closes: vim/vim#1574325876a6cdd
Co-authored-by: h-east <h.east.727@gmail.com>
Problem: No way to get prompt for input()/confirm()
Solution: add getcmdprompt() function (Shougo Matsushita)
(Shougo Matsushita)
closes: vim/vim#156676908428560
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
**Problem:** `is_ancestor()` uses a slow, bottom-up parent lookup which
has performance pitfalls detailed in #28512.
**Solution:** Take `is_ancestor()` from $O(n^2)$ to $O(n)$ by
incorporating the use of the `child_containing_descendant()` function
Problem: When using nvim_paste in a mapping during a macro recording,
both the mapping and the paste are recorded, causing the paste
to be performed twice when replaying the macro.
Solution: Only record a paste when it is from RPC.
Unfortunately this means there is no way for a script to make a recorded
paste. A way to enable that can be discussed later if there is need.
Before this PR, the behavior of nvim_paste is:
- When vim.paste() returns false, return false to the client, but treat
following chunks normally (i.e. rely on the client cancelling the
paste as expected).
- When vim.paste() throws an error, still return true to the client, but
drain the following chunks in the stream without calling vim.paste().
There are two problems with such behavior:
- When vim.paste() errors, the client is still supposed to send the
remaining chunks of the stream, even though they do nothing.
- Having different code paths for two uncommon but similar situations
complicates maintenance.
This PR makes both the cancel case and the error case return false to
the client and drain the remaining chunks of the stream, which, apart
from sharing the same code path, is beneficial whether the client checks
the return value of nvim_paste or not:
- If the client checks the return value, it can avoid sending the
following chunks needlessly after an error.
- If the client doesn't check the return value, chunks following a
cancelled chunk won't be pasted on the server regardless, which leads
to less confusing behavior.
Problem:
`vim.fs.dirname([[C:\User\XXX\AppData\Local]])` returns "." on
mingw/msys2.
Solution:
- Check for "mingw" when deciding `iswin`.
- Use `has("win32")` where possible, it works in "fast" contexts since
b02eeb6a72.
In the api_info() output:
:new|put =map(filter(api_info().functions, '!has_key(v:val,''deprecated_since'')'), 'v:val')
...
{'return_type': 'ArrayOf(Integer, 2)', 'name': 'nvim_win_get_position', 'method': v:true, 'parameters': [['Window', 'window']], 'since': 1}
The `ArrayOf(Integer, 2)` return type didn't break clients when we added
it, which is evidence that clients don't use the `return_type` field,
thus renaming Dictionary => Dict in api_info() is not a breaking change.
In the api_info() output:
:new|put =map(filter(api_info().functions, '!has_key(v:val,''deprecated_since'')'), 'v:val')
...
{'return_type': 'ArrayOf(Integer, 2)', 'name': 'nvim_win_get_position', 'method': v:true, 'parameters': [['Window', 'window']], 'since': 1}
The `ArrayOf(Integer, 2)` return type didn't break clients when we added
it, which is evidence that clients don't use the `return_type` field,
thus renaming Dictionary => Dict in api_info() is not (in practice)
a breaking change.
Problem: When input immediately follows end of bracketed paste, the
nvim_input may be processed before the nvim_paste.
Solution: Ensure some waiting after the end of a bracketed paste.
Problem: incorrect internal diff with an empty file
Solution: Set pointer to NULL, instead of using an empty line file
(Yukihiro Nakadaira)
When using internal diff, empty file is read as one empty line file.
So result differs from external diff.
closes: vim/vim#15719f1694b439b
Co-authored-by: Yukihiro Nakadaira <yukihiro.nakadaira@gmail.com>
- Fixes 'autoindent' being applied during redo.
- Makes redoing a large paste significantly faster.
- Stores pasted text in the register being recorded.
Fix#28561
- Allow function command modifiers.
- Match function bodies starting with empty lines.
Command modifiers reported by @Konfekt.
fixesvim/vim#15671closes: vim/vim#1567435699f1749
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
The default builtin UI client does not declare its client info. This
reduces discoverability and makes it difficult for plugins to identify
the UI.
Solution:
- Call nvim_set_client_info after attaching, as recommended by `:help dev-ui`.
- Also set the "pid" field.
- Also change `ui_active()` to return a count. Not directly relevant to
this commit, but will be useful later.
Problem: filetype: salt files are not recognized
Solution: Detect '*.sls' files as filetype salt,
include a syntax script (Gregory Anders)
closes: vim/vim#1568989b9bb4ac8
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: inconsistent case sensitive extension matching
Solution: unify case sensitive extension matching (Evgeni Chasnovski).
There are different approaches of how extensions are matched with
respect to case sensitivity. In particular, '\c' flag is used in pattern
whereas in most places case sensitive matching is guarded behind
`has("fname_case")` condition.
Replace all instances of '\c' with an explicit case sensitive pattern
variants guarded by `has("fname_case")`. Strictly speaking, this is a
breaking change because only two (most common and prevailingly tested)
variants are now matched: upper first letter and upper all letters.
closes: vim/vim#1567259b089c9df
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem:
- "process" is often used as a verb (`multiqueue_process_events`), which
is ambiguous for cases where it's used as a topic.
- The documented naming convention for processes is "proc".
- `:help dev-name-common`
- Shorter is better, when it doesn't harm readability or
discoverability.
Solution:
Rename "process" => "proc" in all C symbols and module names.
This module is generally used by any tests that need the full Nvim TUI
instead of `screen.lua`. Thus it should live in `functional/` instead of
in `functional/terminal/`.
Problem: heap-use-after-free in garbage collection with location list
user data.
Solution: Mark user data as in use when no other window is referencing
the location list (zeertzjq)
fixes: neovim/neovim#30371closes: vim/vim#15683be4bd189d2
Problem: Crash with cursor-screenline and narrow window
(elig0n)
Solution: Don't set right_col when width2 is 0 (zeertzjq).
fixes: vim/vim#15677closes: vim/vim#1567859149f0269
Problem: Wrong cursor-screenline when resizing window
Solution: Invalidate saved left_col and right_col when width1 or width2
change.
closes: vim/vim#1567986dc4f8b43
**Problem:** `vim.treesitter.get_parser` will throw an error if no parser
can be found.
- This means the caller is responsible for wrapping it in a `pcall`,
which is easy to forget
- It also makes it slightly harder to potentially memoize `get_parser`
in the future
- It's a bit unintuitive since many other `get_*` style functions
conventionally return `nil` if no object is found (e.g. `get_node`,
`get_lang`, `query.get`, etc.)
**Solution:** Return `nil` if no parser can be found or created
- This requires a function signature change, and some new assertions in
places where the parser will always (or should always) be found.
- This commit starts by making this change internally, since it is
breaking. Eventually it will be rolled out to the public API.
Problem: filetype: swiftinterface files are not recognized
Solution: Detect '*.swiftinterface' files as swift filetype
(LosFarmosCTL)
closes: vim/vim#1565803cac4b70d
Co-authored-by: LosFarmosCTL <80157503+LosFarmosCTL@users.noreply.github.com>
Skipped importing the following unit tests from libtermkey as they'd
require introducing a lot of unused code or require more effort to port
than is probably worth:
- 05read
- 12strpkey
- 20canon
- 40ti-override
Problem:
floating windows did not correctly inherit the NormalFloat highlight
group from the global namespace when it was not defined in the window-specific
namespace. This led to floating windows losing their background highlight when
switching between namespaces.
Solution:
Updated the window highlight logic in update_window_hl() to handle the fallback.
This fix resolves issues with floating window backgrounds not displaying as expected
in certain namespace configurations.
$NVIM_LOG_FILE: /Users/runner/work/neovim/neovim/build/.nvimlog
WRN 2024-09-08T21:48:13.279 ?.21134 vim_mktempdir:3281: $TMPDIR tempdir not a directory (or does not exist): TMPDIR-should-be-ignored
WRN 2024-09-08T21:48:13.312 ?.21137 vim_mktempdir:3281: $TMPDIR tempdir not a directory (or does not exist): TMPDIR-should-be-ignored
- `alter_slashes` belongs in `testutil.lua`, not `testnvim.lua`.
- `alter_slashes` is an unusual name. Rename it to `fix_slashes`.
- invert its behavior, to emphasize that `/` slashes are the preferred,
pervasive convention, not `\` slashes.
Problem:
If $NVIM_APPNAME is a relative dir path, Nvim fails to start its
primary/default server, and `v:servername` is empty.
Root cause is d34c64e342, but this wasn't
noticed until 96128a5076 started reporting the error more loudly.
Solution:
- `server_address_new`: replace slashes "/" in the appname before using
it as a servername.
- `vim_mktempdir`: always prefer the system-wide top-level "nvim.user/"
directory. That isn't intended to be specific to NVIM_APPNAME; rather,
each *subdirectory* ("nvim.user/xxx") is owned by each Nvim instance.
Nvim "apps" can be identified by the server socket(s) stored in those
per-Nvim subdirs.
fix#30256
Problem: vim.tbl_deep_extend had an undocumented feature where arrays
(integer-indexed tables) were not merged but compared literally (used
for merging default and user config, where one list should overwrite the
other completely). Turns out this behavior was relied on in quite a
number of plugins (even though it wasn't a robust solution even for that
use case, since lists of tables (e.g., plugin specs) can be array-like
as well).
Solution: Revert the removal of this special feature. Check for
list-like (contiguous integer indices) instead, as this is closer to the
intent. Document this behavior.
Problem:
$XDG_RUNTIME_DIR may be broken on WSL, which prevents starting (and even
building) Nvim. #30282
Solution:
- When startup fails, mention the servername in the error message.
- If an autogenerated server address fails, log an error and continue
with an empty `v:servername`. It's only fatal if a user provides a bad
`--listen` or `$NVIM_LISTEN_ADDRESS` address.
Before:
$ nvim --headless --listen ./hello.sock
nvim: Failed to --listen: "address already in use"
$ NVIM_LISTEN_ADDRESS='./hello.sock' ./build/bin/nvim --headless
nvim: Failed to --listen: "address already in use"
After:
$ nvim --headless --listen ./hello.sock
nvim: Failed to --listen: address already in use: "./hello.sock"
$ NVIM_LISTEN_ADDRESS='./hello.sock' ./build/bin/nvim --headless
nvim: Failed $NVIM_LISTEN_ADDRESS: address already in use: "./hello.sock"
Problem:
str_byteindex_enc could return an error if the index was longer than the
lline length. This was handled in each of the calls to it individually
Solution:
* Fix the call at the source level so that if the index is higher than
the line length, line length is returned as per LSP specification
* Remove pcalls on str_byteindex_enc calls. No longer needed now that
str_byteindex_enc has a bounds check.
Font-family names must be enclosed in quotation marks to ensure that
fonts are applied correctly when there are spaces in the name.
Fix an issue where multiple fonts specified in `vim.o.guifont` are
inserted as a single element, treating them as a single font.
Support for escaping commas with backslash and ignoring spaces
after a comma.
ref `:help 'guifont'`
Problem: Wrong breakindentopt=list:-1 with multibyte chars or TABs in
text matched by 'formatlistpat' (John M Devin)
Solution: Use the width of the match text (zeertzjq)
fixes: vim/vim#15634closes: vim/vim#1563561a6ac4d00
Problem: Resetting cell widths can make 'listchars' or 'fillchars'
invalid.
Solution: Check for conflicts when resetting cell widths (zeertzjq).
closes: vim/vim#1562966f65a46c5
Problem:
Since 96128a5076 the test logs have noise from tests that *expect*
failures:
$NVIM_LOG_FILE: /tmp/cirrus-ci-build/build/.nvimlog
(last 100 lines)
ERR 2024-09-04T13:38:45.181 T949.28335.0/c terminfo_start:486: uv_pipe_open failed: no such device or address
ERR 2024-09-04T13:38:45.181 T949.28335.0/c flush_buf:2527: uv_write failed: bad file descriptor
ERR 2024-09-04T13:38:45.181 T949.28335.0/c flush_buf:2527: uv_write failed: bad file descriptor
WRN 2024-09-04T13:43:43.294 ?.35904 server_start:173: Failed to start server: address already in use: /…/Xtest_tmpdir/…/T7159.35895.0
WRN 2024-09-04T13:43:43.314 ?.35907 server_start:173: Failed to start server: illegal operation on a directory: /
ERR 2024-09-04T13:43:43.332 ?.35909 socket_watcher_init:60: Host lookup failed: https://example.com
Solution:
Rewrite the test to use `vim.system()`. Set NVIM_LOG_FILE in the child
process to a "throwaway" logfile.
Problem: Marktree meta count still includes invalidated marks, making
guards that check the meta total ineffective.
Solution: Revise marktree metadata when in/revalidating a mark.
- The exclusion of lists was never justified in the commit history and is
the wrong thing to do for a function that deals with tables.
- Move the error checks out of the recursive path.
Fixes#23654
Problem: Newline causes E749 in Ex mode (after 9.1.0573).
Solution: Don't execute empty command followed by a newline.
closes: vim/vim#156142432b4a753
Cherry-pick code change from patch 8.2.3405.
Updated the `rpc.connect` function to support connecting to LSP servers
using hostnames, not just IP addresses. This change includes updates to
the documentation and additional test cases to verify the new
functionality.
- Modified `connect` function to resolve hostnames.
- Updated documentation to reflect the change.
- Added test case for connecting using hostname.
Added a TCP echo server utility function to the LSP test suite. This
server echoes the first message it receives and is used in tests to
verify LSP server connections via both IP address and hostname.
Refactored existing tests to use the new utility function.
Problem:
crash when calling nvim_buf_get_text() with a large negative start_col:
call nvim_buf_get_text(0, 0, -123456789, 0, 0, {})
Solution:
clamp start_col after subtracting it from the line length.
Problem:
137f98cf64 added the `create` parameter to `tmpname()` but didn't
fully implement it.
Solution:
- Update impl for the `os.tmpname()` codepath.
- Inspect all usages of `tmpname()`, update various tests.
Problem:
`nvim --listen` does not error on EADDRINUSE. #30123
Solution:
Now that `$NVIM_LISTEN_ADDRESS` is deprecated and input *only* (instead
of the old, ambiguous situation where it was both an input *and* an
output), we can be fail fast instead of trying to "recover". This
reverts the "recovery" behavior of
704ba4151e, but that was basically
a workaround for the fragility of `$NVIM_LISTEN_ADDRESS`.
For context, see https://github.com/neovim/neovim/pull/24738. Before
that PR, Nvim did not correctly handle captures with quantifiers. That
PR made the correct behavior opt-in to minimize breaking changes, with
the intention that the correct behavior would eventually become the
default. Users can still opt-in to the old (incorrect) behavior for now,
but this option will eventually be removed completely.
BREAKING CHANGE: Any plugin which uses `Query:iter_matches()` must
update their call sites to expect an array of nodes in the `match`
table, rather than a single node.
Problem: Window is updated with potentially invalid skipcol in recursive
window update path. I.e. cursor outside of visible range in
large line that does not fit.
Solution: Make sure it is valid (Luuk van Baal).
3d5065fc75
Problem: inserting with a count is inefficient
Solution: Disable calculation of the cursor position and topline, if a
count has been used (Ken Takata)
Optimize insertion when using :normal 10000ix.
This patch optimizes the insertion with a large count (e.g. `:normal
10000ix`).
It seems that calculation of the cursor position for a long line is slow
and it takes O(n^2). Disable the calculation if not needed.
Before:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m1.879s
user 0m1.328s
sys 0m0.139s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m5.574s
user 0m5.421s
sys 0m0.093s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m23.588s
user 0m23.187s
sys 0m0.140s
```
After:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m0.187s
user 0m0.046s
sys 0m0.093s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m0.217s
user 0m0.046s
sys 0m0.108s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m0.278s
user 0m0.093s
sys 0m0.140s
$ time ./vim --clean -c 'normal 80000ix' -cq!
real 0m0.494s
user 0m0.311s
sys 0m0.140s
$ time ./vim --clean -c 'normal 160000ix' -cq!
real 0m1.302s
user 0m1.140s
sys 0m0.094s
```
closes: vim/vim#1558809b80d23cf
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: completion is inserted on Enter with "noselect"
(Carman Fu)
Solution: check noselect before update compl_shown_match
(glepnir)
fixes: vim/vim#15526closes: vim/vim#15530753794bae8
Problem: Behavior of Enter in completion depends on typing speed.
Solution: Don't make whether Enter selects original text depend on
whether completion has been interrupted, which can happen
interactively with a slow completion function.
Problem: prefix can be a symbol like period, the fuzzy matching can't
handle it correctly.
Solution: when prefix is empty or a symbol add all lsp completion
result into matches.
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem:
Things like underlines are always given a default foreground highlight
regardless of the value of `sp`.
Solution:
Check for `sp` first, and apply that color to the text decoration color if it
exists.
Limitations:
If there is no value of `sp`, vim applies a text decoration color that matches
the foreground of the text. This is still not implemented (and seems like a much
more complex problem): in TOhtml, the underline will still be given a default
foreground highlight.
Problem: "dvgo" is not always an inclusive motion
(Iain King-Speir)
Solution: initialize the inclusive flag to false
fixes: vim/vim#15580closes: vim/vim#15582f8702aeb8f
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Installing treesitter parser is hard (harder than
climbing to heaven).
Solution: Add optional support for wasm parsers with `wasmtime`.
Notes:
* Needs to be enabled by setting `ENABLE_WASMTIME` for tree-sitter and
Neovim. Build with
`make CMAKE_EXTRA_FLAGS=-DENABLE_WASMTIME=ON
DEPS_CMAKE_FLAGS=-DENABLE_WASMTIME=ON`
* Adds optional Rust (obviously) and C11 dependencies.
* Wasmtime comes with a lot of features that can negatively affect
Neovim performance due to library and symbol table size. Make sure to
build with minimal features and full LTO.
* To reduce re-compilation times, install `sccache` and build with
`RUSTC_WRAPPER=<path/to/sccache> make ...`
Problem: The matchparen plugin is slow on a long line.
Solution: Don't use a regexp to get char at and before cursor.
(zeertzjq)
Example:
```vim
call setline(1, repeat(' foobar', 100000))
runtime plugin/matchparen.vim
normal! $hhhhhhhh
```
closes: vim/vim#1556881e7513c86
Problem: Wrong patlen value in ex_substitute() (after 9.1.0426).
Solution: Compute patlen after finding end separator.
(zeertzjq)
Add a more explicit test. The test already passes as the only case
where a overlarge patlen value matters was fixed by patch 9.1.0689.
closes: vim/vim#15565d1c8d2de4b
Problem: cannot set special highlight kind in popupmenu
Solution: add kind_hlgroup item to complete function
(glepnir)
closes: vim/vim#1556138f99a1f0d
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Some items of completion results include function signatures that can
cause the pum to be very long when a function has many params, because pum
scales with the longest word/abbr.
Solution: add custom covert function that can customise abbr to remove params.
Problem: mode() returns wrong value with <Cmd> mapping
Solution: Change decision priority of VIsual_active and move
visual mode a bit further down (kuuote)
closes: vim/vim#155330fd1cb1b1f
Co-authored-by: kuuote <znmxodq1@gmail.com>
Problem: zip-plugin has problems with special characters
(user202729)
Solution: escape '*?[\' on Unix and handle those chars
a bit differently on MS-Windows, add a test, check
before overwriting files
runtime(zip): small fixes for zip plugin
This does the following:
- verify the unzip plugin is executable when loading the autoload plugin
- handle extracting file names with '[*?\' in its name correctly by
escaping those characters for the unzip command (and handle those
characters a bit differently on MS-Windows, since the quoting is different)
- verify, that the extract plugin is not overwriting a file (could cause
a hang, because unzip asking for confirmation)
- add a test zip file which contains those special file names
fixes: vim/vim#15505closes: vim/vim#155197790ea0c68
Co-authored-by: Christian Brabandt <cb@256bit.org>
Upon `terminal_enter`, `mapped_ctrl_c` is set in order to avoid `CTRL-C`
interrupts (which is proxied to the terminal process instead), `os_inchar`
will then test `mapped_ctrl_c` against `State` and set `ctrl_c_interrupts=false`
which prevents `process_ctrl_c` from setting `got_int=true` in a terminal
state.
However, if `got_int` is set outside of `process_ctrl_c`, e.g. via
`interrupt()`, this will hang the neovim process as `terminal_execute` will
enter an endless loop as `got_int` will never be cleared causing `safe_vgetc`
to always return `Ctrl_C`.
A minimal example reproducing this bug:
```vim
:autocmd TermEnter * call timer_start(500, {-> interrupt()})
:terminal
:startinsert
```
To fix, we make sure `got_int` is cleared inside `terminal_execute` when
it detects `Ctrl_C`.
Closes#20726
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
When a C0 character is present in an OSC terminator (i.e. after the ESC
but before a \ (0x5c) or printable character), vterm executes the
control character and resets the current string fragment. If the C0
character is the final byte in the sequence, the string fragment has a
zero length. However, because the VT parser is still in the "escape"
state, vterm attempts to subtract 1 from the string length (to account
for the escape character). When the string fragment is empty, this
causes an underflow in the unsigned size variable, resulting in a buffer
overflow.
The fix is simple: explicitly check if the string length is non-zero
before subtracting.
Lua's string.byte has a maximum (undocumented) allowable length, so
vim.text.hencode fails on large strings with the error "string slice too
long".
Instead of converting the string to an array of bytes up front, convert
each character to a byte one at a time.
Problem: :keeppatterns does not retain the substitute pattern
for a :s command
Solution: preserve the last substitute pattern when used with the
:keeppatterns command modifier (Gregory Anders)
closes: vim/vim#154973b59be4ed8
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: [security]: use-after-free in alist_add()
(SuyueGuo)
Solution: Lock the current window, so that the reference to
the argument list remains valid.
This fixes CVE-2024-43374
0a6e57b09b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: marker folds may get corrupted on undo (Yousef Mohammed)
Solution: when adjusting folds, make sure that line1 is the lower limit
and line2 is the upper line limit. In particular, line2 should
not be able to get smaller than line1.
fixes: vim/vim#15455closes: vim/vim#154668d02e5cf96
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Contents of terminal buffer are not reflown when Nvim is
resized.
Solution: Enable reflow in libvterm by default. Now that libvterm is
vendored, also fix "TUI rapid resize" test failures there.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
Problem: Some other options reset curswant unnecessarily when set.
(Andrew Haust)
Solution: Don't reset curswant when setting 'comments', 'commentstring'
or 'define' (zeertzjq)
fixes: vim/vim#15462closes: vim/vim#15467b026a293b1
Problem: Renaming a buffer on startup may cause using freed memory.
Solution: Check if the buffer is used in a window. (closesvim/vim#8955)
d3710cf01e
Cherry-pick Test_echo_true_in_cmd() from Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: tests: zip test still resets 'shellslash' option
Solution: Remove resetting the 'shellslash' option, the zip
plugin should now be able to handle this options
closes: vim/vim#1543491efcd115e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: the zip plugin is not tested.
Solution: include tests (Damien)
closes: vim/vim#15411d7af21e746
Co-authored-by: Damien <141588647+xrandomname@users.noreply.github.com>
This also makes shada reading slightly faster due to avoiding
some copying and allocation.
Use keysets to drive decoding of msgpack maps for shada entries.
Problem: [security] double-free in dialog_changed()
(SuyueGuo)
Solution: Only clear pointer b_sfname pointer, if it is different
than the b_ffname pointer. Don't try to free b_fname,
set it to NULL instead.
fixes: vim/vim#15403
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-46pw-v7qw-xc2fb29f4abcd4
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: goaccess config file not recognized
Solution: detect 'goaccess.conf' as goaccess filetype, also
include a basic syntax and ftplugin (Adam Monsen)
Add syntax highlighting for GoAccess configuration file.
GoAccess is a real-time web log analyzer and interactive viewer that
runs in a terminal in *nix systems or through your browser.
GoAccess home page: https://goaccess.iocloses: vim/vim#154140aa65b48fb
Co-authored-by: Adam Monsen <haircut@gmail.com>
Problem:
Tests have lots of exec_lua calls which input blocks of code
provided as unformatted strings.
Solution:
Teach exec_lua how to handle functions.
Problem: Calling a function from an "expr" option has too much overhead.
Solution: Add call_simple_func() and use it for 'foldexpr'
87b4e5c5db
Cherry-pick a call_func() change from patch 8.2.1343.
Add expr-option-function docs to options.txt.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: using a script-local function requires using "s:" when
setting 'completefunc'.
Solution: Do not require "s:" in Vim9 script. (closesvim/vim#9796)
1fca5f3e86
vim-patch:8.2.4417: using NULL pointer
Problem: Using NULL pointer.
Solution: Set offset after checking for NULL pointer.
e89bfd212b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ex: trailing dot is optional for :g and :insert/:append
Solution: don't break out early, when the next command is empty.
(Mohamed Akram)
The terminating period is optional for the last command in a global
command list.
closes: vim/vim#154070214680a8e
Co-authored-by: Mohamed Akram <mohd.akram@outlook.com>
Problem: [security] use-after-free in tagstack_clear_entry
(Suyue Guo )
Solution: Instead of manually calling vim_free() on each of the tagstack
entries, let's use tagstack_clear_entry(), which will
also free the stack, but using the VIM_CLEAR macro,
which prevents a use-after-free by setting those pointers
to NULL
This addresses CVE-2024-41957
Github advisory:
https://github.com/vim/vim/security/advisories/GHSA-f9cr-gv85-hcr48a0bbe7b8a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in check_argument_type
Solution: Reset function type pointer when freeing the function type
list
function pointer fp->uf_func_type may point to the same memory, that was
allocated for fp->uf_type_list. However, when cleaning up a function
definition (e.g. because it was invalid), fp->uf_type_list will be
freed, but fp->uf_func_type may still point to the same (now) invalid
memory address.
So when freeing the fp->uf_type_list, check if fp->func_type points to
any of those types and if it does, reset the fp->uf_func_type pointer to
the t_func_any (default) type pointer
closes: vim/vim#136520f28791b21
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in exec_instructions()
Solution: get tv pointer again
[security]: use-after-free in exec_instructions()
exec_instructions may access freed memory, if the GA_GROWS_FAILS()
re-allocates memory. When this happens, the typval tv may still point to
now already freed memory. So let's get that pointer again and compare it
with tv. If those two pointers differ, tv is now invalid and we have to
refresh the tv pointer.
closes: vim/vim#136215dd41d4b63
Co-authored-by: Christian Brabandt <cb@256bit.org>
`buf.code_action` always included diagnostics on a given line from all
clients. Servers should only receive diagnostics they published, and in
the exact same format they sent it.
Should fix https://github.com/neovim/neovim/issues/29500
Problem: Cannot use an autoload function from a package under start.
Solution: Also look in the "start" package directory. (Bjorn Linse,
closesvim/vim#7193)
223a950a85
Nvim already does this in do_in_cached_path(), and this change has no
effect in Nvim as Nvim removes DIP_START after do_in_cached_path().
Accidentally failed to mark as ported:
vim-patch:8.2.1731: Vim9: cannot use += to append to empty NULL list
Co-authored-by: bfredl <bjorn.linse@gmail.com>
Problem:
Some language servers (e.g., rust-analyzer, texlab) are desynced when
the user deletes the entire contents of the buffer. This is due to the
discrepancy between how nvim computes diff and how nvim treats empty
buffer.
* diff: If the buffer became empty, then the diff includes the last
line's eol.
* empty buffer: Even if the buffer is empty, nvim regards it as having
a single empty line with eol.
Solution:
Add special case for diff computation when the buffer becomes empty so
that it does not include the eol of the last line.
Problem: CompletionItem in lsp spec mentioned the deprecated attribute
Solution: when item has deprecated attribute set hl_group to DiagnosticDeprecated
in complete function
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem: eval.c not sufficiently tested
Solution: Add a few more additional tests for eval.c,
(Yegappan Lakshmanan)
closes: vim/vim#147994776e64e72
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Some functions are not tested
Solution: Add a few more tests, fix a few minor problems
(Yegappan Lakshmanan)
closes: vim/vim#14789fe424d13ef
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: regex: wrong match when searching multi-byte char
case-insensitive (diffsetter)
Solution: Apply proper case-folding for characters and search-string
This patch does the following 4 things:
1) When the regexp engine compares two utf-8 codepoints case
insensitive it may match an adjacent character, because it assumes
it can step over as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some
single-byte value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte value
's' by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
* we try to match the correct length for the pattern and the text
* in case of a match, we step over it correctly
There is one tricky thing for the backtracing engine. We also need to
calculate correctly the number of bytes to compare the 2 different
utf-8 strings s1 and s2. So we will count the number of characters in
s1 that the byte len specified. Then we count the number of bytes to
step over the same number of characters in string s2 and then we can
correctly compare the 2 utf-8 strings.
2) A similar thing can happen for the NFA engine, when skipping to the
next character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over.
So this needs to be adjusted in find_match_text() as well.
3) A related issue turned out, when prog->match_text is actually empty.
In that case we should try to find the next match and skip this
condition.
4) When comparing characters using collections, we must also apply case
folding to each character in the collection and not just to the
current character from the search string. This doesn't apply to the
NFA engine, because internally it converts collections to branches
[abc] -> a\|b\|c
fixes: vim/vim#14294closes: vim/vim#1475622e8e12d9f
N/A patches:
vim-patch:9.0.1771: regex: combining chars in collections not handled
vim-patch:9.0.1777: patch 9.0.1771 causes problems
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Illegal memory access when pattern starts with illegal byte.
Solution: Do not match a character with an illegal byte.
f50940531d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use items() on a string.
Solution: Make items() work on a string. (closesvim/vim#11016)
3e518a8ec7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: items() does not work on a list. (Sergey Vlasov)
Solution: Make items() work on a list. (closesvim/vim#11013)
976f859763
Skip CHECK_LIST_MATERIALIZE.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Check that mapping rhs starts with lhs doesn't work if lhs is
not simplified.
Solution: Keep track of the mapblock containing the alternative lhs and
also compare with it (zeertzjq).
fixes: vim/vim#15376closes: vim/vim#153849d997addc7
Cherry-pick removal of save_m_str from patch 8.2.4059.
Problem: E1510 may happen when formatting a message
(after 9.1.0181).
Solution: Only give E1510 when using typval. (zeertzjq)
closes: vim/vim#153910dff31576a
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem: filetype: SuperHTML template files not recognized
Solution: Update the filetype detection code to detect '*.shtml' either
as HTML (Server Side Includes) or SuperHTML (template files)
(EliSauder)
related: vim/vim#15355
related: vim/vim#15367e57c9a19ed
Co-authored-by: EliSauder <24995216+EliSauder@users.noreply.github.com>
Reverts https://github.com/neovim/neovim/pull/29212 and adds a few
additional test cases
From the spec
> All text edits ranges refer to positions in the document they are
> computed on. They therefore move a document from state S1 to S2 without
> describing any intermediate state. Text edits ranges must never overlap,
> that means no part of the original document must be manipulated by more
> than one edit. However, it is possible that multiple edits have the same
> start position: multiple inserts, or any number of inserts followed by a
> single remove or replace edit. If multiple inserts have the same
> position, the order in the array defines the order in which the inserted
> strings appear in the resulting text.
The previous fix seems wrong. The important part:
> If multiple inserts have the same position, the order in the array
> defines the order in which the inserted strings appear in the
> resulting text.
Emphasis on _appear in the resulting text_
Which means that in:
local edits1 = {
make_edit(0, 3, 0, 3, { 'World' }),
make_edit(0, 3, 0, 3, { 'Hello' }),
}
`World` must appear before `Hello` in the final text. That means the old
logic was correct, and the fix was wrong.
Problem: Rename of pum hl_group is incomplete in source.
Solution: Also rename the test function. Rename to user_hlattr in code
to avoid confusion with pum_extra. Add test with matched text
highlighting (zeertzjq).
closes: vim/vim#153484100852e09
Problem: cannot mark deprecated attributes in completion menu
Solution: add hl_group to the Dictionary of supported completion fields
(glepnir)
closes: vim/vim#15314508e7856ec
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: filetype: Make syntax highlighting off for MS Makefiles
Solution: Try to detect MS Makefiles and adjust syntax rules to it.
(Ken Takata)
Highlighting of variable expansion in Microsoft Makefile can be broken.
E.g.:
2979cfc262/src/Make_mvc.mak (L1331)
Don't use backslash as escape characters if `make_microsoft` is set.
Also fix that `make_no_comments` was not considered if `make_microsoft`
was set.
Also add description for `make_microsoft` and `make_no_comments` to the
documentation and include a very simple filetype test
closes: vim/vim#15341eb4b903c9b
Co-authored-by: Ken Takata <kentkt@csc.jp>
Also:
- Remove mt_end() and MT_FLAG_DECOR_VIRT_TEXT_INLINE checks, as they are
already checked by marktree_itr_check_filter().
- Move ns_in_win() to the last check in decor_redraw_col().
Problem: Swapname has double slash when 'directory' ends in double slash.
(Shane Smith)
Solution: Remove the superfluous slash. (closesvim/vim#8876)
8b0e62c93b
The test got lost in #29758...
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cursor moves beyond start of a folded range at the end of a buffer.
Solution: Move cursor to start of fold when going beyond end of buffer.
Check that cursor moved to detect FAIL in outer cursor function.
(Luuk van Baal)
dc373d456b
Problem: filetype: OpenGL Shading Language files are not detected
Solution: detect various file extensions as GLSL filetype, include
indent and syntax script, do no longer recognize '*.comp'
as Mason filetype (Gregory Anders)
closes: vim/vim#15317e4b991ed36
Problem: Marks whose position did not change with the action that
invalidated them (right_gravity = false) are not revalidated
upon undo.
Solution: Remove early return when restoring a marks saved position so
that it is still revalidated. Add "move" guards instead.
Problem: pattern detection for Dracula language uses "*lvs" and "*lpe".
as there is no dot, those are not treated as extensions which
they should (judging by 'runtime/syntax/dracula.vim' and
common sense).
Solution: use "*.lvs" and "*.lpe" patterns (Evgeni Chasnovski)
closes: vim/vim#153035fb801a74f
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: filetype: prolog detection can be improved
Solution: Improved the Prolog file detection regex and added tests for
all cases. (igna_martinoli)
fixes: vim/vim#10835closes: vim/vim#1520650dc83cf92
Only include the tests, as code changes are superseded by later patches.
Co-authored-by: igna_martinoli <ignamartinoli@protonmail.com>
Problem: Wrong cursor position with 'breakindent' when a double-width
character doesn't fit in a screen line (mikoto2000)
Solution: Include the width of the 'breakindent' properly.
(zeertzjq)
fixes: vim/vim#15289closes: vim/vim#15290b5d6b5caac
Problem: Termdebug: still get E1023 when specifying arguments and using
a prompt buffer.
Solution: Use empty() instead of len(). Add a test. Fix wrong order of
arguments to assert_equal() in Test_termdebug_basic().
(zeertzjq)
closes: vim/vim#15288aef6179bcf
Problem: filetype: Debian devscripts config files are not recognized
Solution: detect devscripts.conf and .devscripts files as sh filetype
(sourced by /bin/sh)
closes: vim/vim#1522776c19028ff
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: Functions are global while they could be local.
Solution: Add "static". Add a few tests. (Yegappan Lakshmanan,
closesvim/vim#10612)
ee47eaceaa
Omit script_name_after_autoload(), untrans_function_name(): Vim9 script
only.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Test may leave file behind.
Solution: Delete the temporary file. Don't profile in the running Vim
instance.
8c801b374b
This only includes test_quickfix.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Various inconsistencies in test files.
Solution: Add modelines where they were missing. Use Check commands instead
of silently skipping over tests. Adjust indents and comments.
(Ken Takata, closesvim/vim#6695)
6d91bcb4d2
This only includes test_quickfix.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Code style is not check in test scripts.
Solution: Add basic code style check for test files.
94722c5107
Use Test_test_files() from latest Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Too many delete() calls in tests.
Solution: Use deferred delete where possible.
56564964e6
This includes all changes expect changes in test_startup.vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
When there are multiple inlay hints present at the same position, they
should be rendered in the order they are received in the response from
LSP as per the LSP spec. Currently, this is not respected.
Solution:
Gather all hints for a given position, and then set it in a single
extmark call instead of multiple set_extmark calls. This leads to fewer
extmark calls and correct inlay hints being rendered.
Problem: In :let-heredoc line continuation is recognized.
Solution: Do not consume line continuation. (Ozaki Kiichi, closesvim/vim#4580)
e96a2498f9
Nvim already sets may_garbage_collect to false in nv_event(), so the
timer change isn't needed.
Other changes have already been ported.
Also fix incorrect port of test in patch 8.1.1356.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: filetype: Mediawiki files are not recognized
Solution: detect "*.mw" and "*.wiki" as mediawiki filetype,
include basic syntax and filetype plugins.
(AvidSeeker)
closes: vim/vim#15266b5844104ab
Co-authored-by: AvidSeeker <avidseeker7@protonmail.com>
Problem: Some command line arguments and regexp errors not tested.
Solution: Add a few test cases. (Dominique Pellé, closesvim/vim#8013)
a2b3e7dc92
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: matchstr() still does not match column offset when done after a
text search.
Solution: Only use the line number for a multi-line search. Fix the test.
(closesvim/vim#10938)
753aead960
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: matchstr() does match column offset. (Yasuhiro Matsumoto)
Solution: Accept line number zero. (closesvim/vim#10938)
75a115e8d6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
