Although the built-in pum completion mechanism will filter anyway on the
next input it is odd if the initial popup shows entries which don't
match the current prefix.
Using fuzzy match on the label/prefix is compatible with
`completeopt+=fuzzy` and also doesn't seem to break postfix snippet
cases
Closes https://github.com/neovim/neovim/issues/29287
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
Problem:
For snippets lsp.completion prefers the label if it is shorter than the
insertText or textEdit to support postfix completion cases but clangd
adds decoration characters to labels. E.g.: `•INT16_C(c)`
Solution:
Use parse_snippet on insertText/textEdit before checking if it is
shorter than the label.
Fixes https://github.com/neovim/neovim/issues/29301
This reduces the number of nil checks around buf_versions usage
Test changes were lifted from 5c33815
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
Problem:
Text edits with the same position (both line and character) were being
reverse sorted prior to being applied which differs from the lsp spec
Solution:
Change the sort order for just the same position edits
* Revert "fix(lsp): account for changedtick version gap on modified reset (#29170)"
This reverts commit 2e6d295f79.
* Revert "refactor(lsp): replace util.buf_versions with changedtick (#28943)"
This reverts commit 5c33815448.
`lsp.util.buf_versions` was already derived from changedtick (`on_lines`
from `buf_attach` synced the version)
As far as I can tell there is no need to keep track of the state in a
separate table.
The `complete()` mechanism matches completion candidates against
the typed text, so strict pre-filtering isn't necessary.
This is a first step towards supporting postfix snippets (like
`items@insert` in luals)
Problem: :TOhtml doesn't properly handle virtual text when it has
multiple highlight groups. It also improperly calculates position offset
for multi-byte virt_text characters.
Solution: Apply the `vim.api.nvim_strwidth` broadly to properly
calculate character offset, and handle the cases where the `hl` argument
can be a table of multiple hl groups.
Deprecation with vim.deprecate is currently too noisy. Show the
following warning instead:
[function] is deprecated. Run ":checkhealth vim.deprecated" for more information.
The important part is that the full message needs to be short enough to
fit in one line in order to not trigger the "Press ENTER or type command
to continue" prompt.
The full information and stack trace for the deprecated functions will
be shown in the new healthcheck `vim.deprecated`.
This will help manage the overly granular checkhealth completion to go
from
```
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
to
```
vim.health
vim.lsp
vim.provider
vim.treesitter
```
The namespacing for healthchecks for neovim modules is inconsistent and
confusing. The completion for `:checkhealth` with `--clean` gives
```
nvim
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
vim.lsp
vim.treesitter
```
There are now three top-level module names for nvim: `nvim`, `provider`
and `vim` with no signs of stopping. The `nvim` name is especially
confusing as it does not contain all neovim checkhealths, which makes it
almost a decoy healthcheck.
The confusion only worsens if you add plugins to the mix:
```
lazy
mason
nvim
nvim-treesitter
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
telescope
vim.lsp
vim.treesitter
```
Another problem with the current approach is that it's not easy to run
nvim-only healthchecks since they don't share the same namespace. The
current approach would be to run `:che nvim vim.* provider.*` and would
also require the user to know these are the neovim modules.
Instead, use this alternative structure:
```
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
and
```
lazy
mason
nvim-treesitter
telescope
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
Now, the entries are properly sorted and running nvim-only healthchecks
requires running only `:che vim.*`.
Problem:
The file watcher backends for Linux have too many limitations and
doesn't work reliably.
Solution:
disable didChangeWatchedFiles on Linux
Ref: #27807, #28058, #23291, #26520
Problem:
Inlay hints `enable()` does not fully implement the `:help dev-lua` guidelines:
Interface conventions ~
- When accepting a buffer id, etc., 0 means "current buffer", nil means "all
buffers". Likewise for window id, tabpage id, etc.
- Examples: |vim.lsp.codelens.clear()| |vim.diagnostic.enable()|
Solution:
Implement globally enabling inlay hints.
* refactor(lsp): do not rely on `enable` to create autocmds
* refactor(lsp): make `bufstates` a defaulttable
* refactor(lsp): make `bufstate` inherit values from `globalstate`
* feat(lsp): `vim.lsp.inlay_hints` now take effect on all buffers by default
* test(lsp): add basic tests for enable inlay hints for all buffers
* test(lsp): add test cases cover more than one buffer
Specifically, functions that are run in the context of the test runner
are put in module `test/testutil.lua` while the functions that are run
in the context of the test session are put in
`test/functional/testnvim.lua`.
Closes https://github.com/neovim/neovim/issues/27004.
Problem:
We need to establish a pattern for `enable()`.
Solution:
- First `enable()` parameter is always `enable:boolean`.
- Update `vim.diagnostic.enable()`
- Update `vim.lsp.inlay_hint.enable()`.
- It was not released yet, so no deprecation is needed. But to help
HEAD users, it will show an informative error.
- vim.deprecate():
- Improve message when the "removal version" is a *current or older* version.
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
`exec_lua` makes code slighly harder to read, so it's beneficial to
remove it in cases where it's possible or convenient.
Not all `exec_lua` calls should be removed even if the test passes as it
changes the semantics of the test even if it happens to pass.
From https://github.com/neovim/neovim/pull/28155#discussion_r1548185779:
"Note for tests like this, which fundamentally are about conversion, you
end up changing what conversion you are testing. Even if the result
happens to be same (as they often are, as we like the rules to be
consistent if possible), you are now testing the RPC conversion rules
instead of the vim script to in-process lua conversion rules."
From https://github.com/neovim/neovim/pull/28155#discussion_r1548190152:
"A test like this specifies that the cursor is valid immediately and not
after a separate cycle of normal (or an other input-processing) mode."
Problem:
LSP basic_finish test modified in #27899 is flaky again after #28030.
Solution:
Run on_setup() immediately after setup using a before_init callback.
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
Problem:
As mentioned in #23002 on_setup and on_init are run concurrently.
However, in basic_finish tests on_setup must attach the client before
on_init finishes. The other basic_finish test isn't flaky because it
makes an RPC request in on_init.
Solution:
Don't use on_setup in basic_finish tests.
Problem: "NOTE"s, inline Vim script code, and links ending in digits may not be
highlighted correctly within the :Tutor.
Solution: set an explicit value for ":syntax iskeyword" that includes digits. Do
it after ":syntax include"s, so the included syntax/sh.vim doesn't mess with the
value.
Increase screen test width so all text within the conclusion section is visible.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
Problem:
`vim.lsp.util.rename()` deletes the buffers that are affected by
renaming. This has undesireable side effects. For example, when renaming
a directory, all buffers under that directory are deleted and windows
displaying those buffers are closed. Also, buffer options may change
after renaming.
Solution:
Rename the buffers with :saveas.
An alternative approach is to record all the relevant states and restore
it after renaming, but that seems to be more complex. In fact, the older
version was attempting to restore the states but only partially and
incorrectly.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
Previously rename would unconditionally read the to-be-renamed file from the
disk and write it to the disk. This is redundant in some cases
If the file is not already loaded, it's not attached to lsp client, so nvim
doesn't need to care about this file.
If the file is loaded but has no change, it doesn't need to be written.
Previously the LSP-Client object contained some fields that are also
in the client config, but for a lot of other fields, the config was used
directly making the two objects vaguely entangled with either not having
a clear role.
Now the config object is treated purely as config (read-only) from the
client, and any fields the client needs from the config are now copied
in as additional fields.
This means:
- the config object is no longet normalised and is left as the user
provided it.
- the client only reads the config on creation of the client and all
other implementations now read the clients version of the fields.
In addition, internal support for multiple callbacks has been added to
the client so the client tracking logic (done in lua.lsp) can be done
more robustly instead of wrapping the user callbacks which may error.
The dispatchers used by the RPC client should be defined in the client,
so they have been moved there. Due to this, it also made sense to move
all code related to client configuration and the creation of the RPC
client there too.
Now vim.lsp.start_client is significantly simplified and now mostly
contains logic for tracking open clients.
- Renamed client.new -> client.start
Problem:
`vim.lsp.diagnostic.on_diagnostic` accepts an undocumented severity_limit
option which is widely used.
Solution:
Deprecate it in favour of `{min = severity}` used in `vim.diagnostic`.
Since this is undocumented, the schedule for removal is accelerated to
0.11.
Problem: There is no test case for vim.lsp.tagfunc; so CI was unable to
catch the infinite loop bug (#27325).
Solution: Add test cases for vim.lsp.tagfunc().
Use the get_language_id client option to resolve the filetype when
matching the document selector in a dynamic capability.
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
refactor(lsp): move glob parsing to vim.glob
Moving the logic for using vim.lpeg to create a match pattern from a
glob into `vim.glob`. There are several places in the LSP spec that
use globs, and it's very useful to have glob matching as a
generally-available utility.
This is the command invoked repeatedly to make the changes:
:%s/^\(.*\)|\%(\*\(\d\+\)\)\?$\n\1|\%(\*\(\d\+\)\)\?$/\=submatch(1)..'|*'..(max([str2nr(submatch(2)),1])+max([str2nr(submatch(3)),1]))/g
Quick fix as follow up to https://github.com/neovim/neovim/pull/26108
kqueue only reports events on a watched folder itself, not for files
created or deleted within. So the approach the PR took doesn't work on FreeBSD.
We'll either need to bring back polling for it, combine watching with manual
file tracking, or disable LSP file watching on FreeBSD
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
Fixes a regression from 5e5f5174e3
Until that commit we had a logic like this:
`local prefix = startbyte and line:sub(startbyte + 1) or line_to_cursor:sub(word_boundary)`
The commit changed the logic and no longer cut off the line at the cursor, resulting in a prefix that included trailing characters
Fixes https://github.com/neovim/neovim/issues/25177
I initially wanted to split this into a refactor commit to make it more
testable, but it appears that already accidentally fixed the issue by
normalizing lnum/col to 0-indexing
The haskell-language-server supports resolve only for a subset of code
actions. For many code actions trying to resolve the `edit` property
results in an error, but the unresolved action already contains a
command that can be executed without issue.
The protocol specification is unfortunately a bit vague about this,
and what the haskell-language-server does seems to be valid.
Example:
newtype Dummy = Dummy Int
instance Num Dummy where
Triggering code actions on "Num Dummy" and choosing "Add placeholders
for all missing methods" resulted in:
-32601: No plugin enabled for SMethod_CodeActionResolve, potentially available: explicit-fields, importLens, hlint, overloaded-record-dot
With this change it will insert the missing methods:
instance Num Dummy where
(+) = _
(-) = _
(*) = _
negate = _
abs = _
signum = _
fromInteger = _
Problem:
Some steps in :Tutor don't work on Windows.
Solution:
Add support for `{unix:...,win:...}` format and transform the Tutor contents
depending on the platform.
Fix https://github.com/neovim/neovim/issues/24166
