Problem:
Since right-click can now show a popup menu, we can provide messaging to
guide users who expect 'mouse' to be disabled by default. So 'mouse' can
now be enabled by default.
Solution:
Do it.
Closes#15521
Problem:
- Since c57f6b28d7#8519, sockets are created in ~/.local/… but XDG
spec says: "XDG_RUNTIME_DIR: Must be on the local filesystem", which
implies that XDG_STATE_DIR is potentially non-local.
- Not easy to inspect Nvim-created temp files (for debugging etc).
Solution:
- Store sockets in stdpath('run') ($XDG_RUNTIME_DIR).
- Establish "/tmp/nvim.user/" as the tempdir root shared by all Nvims.
- Make ok() actually useful.
- Introduce assert_nolog().
closes#3517closes#17093
Problem:
1. CI logs have too many (40+) logs mentioning SIGHUP:
```
WRN 2022-06-18T16:05:47.075 T3568.22499.0/c deadly_signal:177: got signal 1 (SIGHUP)
WRN 2022-06-18T16:05:47.273 T3569.91095.0/c deadly_signal:177: got signal 1 (SIGHUP)
WRN 2022-06-18T16:05:47.651 T3570.59545.0/c deadly_signal:177: got signal 1 (SIGHUP)
```
2. TS parser test still sometimes fails on BSD CI.
3. remote_spec test fails too often.
Solution:
1. Log deadly signals at INFO level. It hasn't been helpful in CI, and
for local troubleshooting it's reasonable to adjust the loglevel as
needed.
2. Adjust the TS parser test again. ref #18911
3. Skip the remote_spec test. The `--remote` feature was merged before
it was fully formed and needs to be revisited.
Problem:
- Unix sockets are created in random /tmp dirs.
- /tmp is messy, unclear when OSes actually clear it.
- The generated paths are very ugly. This adds friction to reasoning
about which paths belong to which Nvim instances.
- No way to provide a human-friendly way to identify Nvim instances in
logs or server addresses.
Solution:
- Store unix sockets in stdpath('state')
- Allow --listen "name" and serverstart("name") to given a name (which
is appended to a generated path).
TODO:
- is stdpath(state) the right place?
Problem:
1. Log messages (especially in CI) are hard to correlate with tests.
2. Since b353a5c05f#11886, dumplog() prints the logs next to test
failures. This is noisy and gets in the way of the test results.
Solution:
1. Associate an incrementing id with each test and include it in log
messages.
- FUTURE: add v:name so Nvim instances can be formally "named"?
2. Mention "child" in log messages if the current Nvim is a child (based
on the presence of $NVIM).
BEFORE:
DBG … 12345 UI: event
DBG … 12345 log_server_msg:722: RPC ->ch 1: …
DBG … 12345 UI: flush
DBG … 12345 inbuf_poll:444: blocking... events_enabled=1 events_pending=0
DBG … 23454 UI: stop
INF … 23454 os_exit:594: Nvim exit: 0
AFTER:
DBG … T57 UI: event
DBG … T57 log_server_msg:722: RPC ->ch 1: …
DBG … T57 UI: flush
DBG … T57 inbuf_poll:444: blocking... events_enabled=1 events_pending=0
DBG … T57/child UI: stop
INF … T57/child os_exit:594: Nvim exit: 0
Problem:
1. The main log routine does not protect itself against recursion.
log_lock() doesn't guard against recursion, it would deadlock...
2. 22b52dd462 (#11501) regressed 6f27f5ef91 (#10172), because
set_init_1..process_spawn tries to log (see backtrace below), but the
mutex isn't initialized yet. Even if the mutex were valid, we don't
want early logging to fallback to stderr because that can break
embedders when stdio is used for RPC.
frame 1: 0x00000001001d54f4 nvim`open_log_file at log.c:205:7
frame 2: 0x00000001001d5390 nvim`logmsg(log_level=1, context="UI: ", func_name=0x0000000000000000, line_num=-1, eol=true, fmt="win_viewport") at log.c:150:20
frame : 0x000000010039aea2 nvim`ui_call_win_viewport(grid=2, win=1000, topline=0, botline=1, curline=0, curcol=0, line_count=1) at ui_events_call.generated.h:321:3
frame 4: 0x00000001003dfefc nvim`ui_ext_win_viewport(wp=0x0000000101816400) at window.c:939:5
frame 5: 0x00000001003ec5b4 nvim`win_ui_flush at window.c:7303:7
frame 6: 0x00000001003a04c0 nvim`ui_flush at ui.c:508:3
frame 7: 0x00000001002966ba nvim`do_os_system(argv=0x0000600000c0c000, input=0x0000000000000000, len=0, output=0x0000000000000000, nread=0x00007ff7bfefe830, silent=false, forward_output=false) at shell.c:894:3
frame 8: 0x0000000100295f68 nvim`os_call_shell(cmd="unset nonomatch; vimglob() { while [ $# -ge 1 ]; do echo \"$1\"; shift; done }; vimglob >/var/folders/gk/3tttv_md06987tlwpyp62jrw0000gn/T/nvimwwvwfD/0 ~foo", opts=kShellOptExpand | kShellOptSilent | kShellOptHideMess, extra_args=0x0000000000000000) at shell.c:663:18
frame 9: 0x0000000100295845 nvim`call_shell(cmd="unset nonomatch; vimglob() { while [ $# -ge 1 ]; do echo \"$1\"; shift; done }; vimglob >/var/folders/gk/3tttv_md06987tlwpyp62jrw0000gn/T/nvimwwvwfD/0 ~foo", opts=kShellOptExpand | kShellOptSilent | kShellOptHideMess, extra_shell_arg=0x0000000000000000) at shell.c:712:14
frame 10: 0x0000000100294c6f nvim`os_expand_wildcards(num_pat=1, pat=0x00007ff7bfefeb20, num_file=0x00007ff7bfefee58, file=0x00007ff7bfefee60, flags=43) at shell.c:328:7
...
frame 23: 0x000000010028ccef nvim`expand_env_esc(srcp=",~foo", dst="~foo", dstlen=4094, esc=false, one=false, prefix=0x0000000000000000) at env.c:673:17
frame 24: 0x000000010026fdd5 nvim`option_expand(opt_idx=29, val=",~foo") at option.c:1950:3
frame 25: 0x000000010026f129 nvim`set_init_1(clean_arg=false) at option.c:558:19
frame 26: 0x00000001001ea25e nvim`early_init(paramp=0x00007ff7bfeff5f0) at main.c:198:3
frame 27: 0x00000001001ea6bf nvim`main(argc=1, argv=0x00007ff7bfeff848) at main.c:255:3
Solution:
1. Check for recursion, show "internal error" message.
- FUTURE: when "remote TUI" is merged, can we remove log_lock()?
2. Skip logging if log_init wasn't called yet.
Remove the command('qall!') from mksession_spec.lua because it prevents
helpers.rmdir() from retrying.
Allow extra trailing spaces when matching terminal lines.
PROBLEM
------------------------------------------------------------------------
$NVIM_LISTEN_ADDRESS has conflicting purposes as both a parameter ("the
current process should listen on this address") and a descriptor ("the
current process is a child of this address").
This contradiction means the presence of NVIM_LISTEN_ADDRESS is
ambiguous, so child Nvim always tries to listen on its _parent's_
socket. This is the cause of lots of "Failed to start server" spam in
our test/CI logs:
WARN 2022-04-30… server_start:154: Failed to start server: address already in use: \\.\pipe\nvim-4480-0
WARN 2022-04-30… server_start:154: Failed to start server: address already in use: \\.\pipe\nvim-2168-0
SOLUTION
------------------------------------------------------------------------
1. Set $NVIM to the parent v:servername, *only* in child processes.
- Now the correct way to detect a "parent" Nvim is to check for $NVIM.
2. Do NOT set $NVIM_LISTEN_ADDRESS in child processes.
3. On startup if $NVIM_LISTEN_ADDRESS exists, unset it immediately after
server init.
4. Open a channel to parent automatically, expose it as v:parent.
Fixes#3118Fixes#6764Fixes#9336
Ref https://github.com/neovim/neovim/pull/8247#issuecomment-380275696
Ref #8696
- Fix the problem that chanclose() does not work for channel created by
nvim_open_term().
- Fix the problem that the loopback channel is not released.
- Fix the error message when sending raw data to the loopback channel.
This commit adds an on_print callback to stdioopen's dictionary
argument which lets the caller specify a function called each time
neovim will try to output something to stdout (e.g. on "echo" or
"echoerr" in --headless mode).
When the user is in ex mode, a call to mode(1) is documented to return
"cv". However, it does not currently do so, because the check which
checks for ex mode is nested inside a conditional which is never reached
in ex mode. Vim uses an explicit check for exmode_active, so let's do
the same thing here. Add some tests for this case both with a TTY and
in silent mode.
Fixes#15147 and fixes#15497. Also sketch "subdir" caching. Currently
this only caches whether an rtp entry has a "lua/" subdir but we could
consider cache other subdirs potentially or even "lua/mybigplugin/"
possibly.
Note: the async_leftpad test doesn't actually fail on master, at least
not deterministically (even when disabling the fast_breakcheck
throttling). It's still useful as a regression test for further changes
and included as such.
site packages must be sourced before user config
NOTE: we only consider dirs exactly matching "after" to be an AFTER dir.
vim8 considers all dirs like "foo/bar_after", "Xafter" etc, as an
"after" dir in SOME codepaths not not in ALL codepaths.
It was not possible to run the tests under the gdbserver because we were
not closing the old session before starting a new one. This caused the
server to not to be able to bind to the given address and crashing the
tests.
This commit closes the session before starting a new one.
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh2702@gmail.com>
Problem
- `redir_exec` is obsolete, but it keeps getting used in new tests
because people copy existing tests.
- Disadvantages of `redir_exec`:
- Captures extra junk before the actual error/message that we _want_ to test.
- Does not fail on error, unlike e.g. `command()`.
Solution
- Use new functions like `nvim_exec` and `pcall_err`.
The order should be:
XDG_CONFIG_HOME/nvim
XDG_DATA_HOME/nvim/site/pack/foo/start/bar/
XDG_CONFIG_HOME/nvim/after
XDG_DATA_HOME/nvim/site/pack/foo/start/bar/after
Otherwise the users site packages will be loaded from ~/.local/share/nvim/site
which can cause unexpected error messages and other kinds of mayhem
Simpler alternative: use "--noplugin". Shouldn't be done because:
(1) these tests should test the ordinary startup code path as close as possible
(2) tests that test the loading of site packages will be added here very soon
v8.1.0736 made some changes for making some emsgs more specific.
Includes the change for Test_lambda_fails() in test_lambda.vim.
Adjust relevant functionaltests to expect the new emsgs.
This patch has been fully ported in my Blob port PR, but it hasn't been
merged yet, so just use what we need from it for now.
Required for v8.1.1821.
