Problem: filetype: some mail tools not recognized
Solution: Detect '.mbsncrc' as conf, '.msmtprc' as msmtp
and '.notmuch-config' as ini filetype
(Shane-XB-Qian)
closes: vim/vim#14533a7a9a476cf
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
Problem: No test for highlight behavior with 'ambiwidth'.
Solution: Add a screendump test for 'ambiwidth' with 'cursorline'.
(zeertzjq)
closes: vim/vim#14554a59e031aa0
Problem:
vim.ui.open "locks up" Nvim if the spawned process does not terminate. #27986
Solution:
- Change `vim.ui.open()`:
- Do not call `wait()`.
- Return a `SystemObj`. The caller can decide if it wants to `wait()`.
- Change `gx` to `wait()` only a short time.
- Allows `gx` to show a message if the command fails, without the
risk of waiting forever.
Problem: CI fails with t_?? test
Solution: use assert_match instead of assert_equal
and test only until t_xo, depending on system
there may be several more termcap codes coming
0d87e3c711
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: When used terminal with XON/XOFF flow control, vim tries to
still make CTRL-S mapping available, which results in severe
screen corruption, especially on large redraws, and even
spurious inputs (John Tsiombikas)
Solution: Disallow CTRL-S mapping if such terminal is recognized.
Don't remove IXON from the bitmask inversion.
(Anton Sharonov)
*** When started like this:
TERM=vt420 vim
:set termcap
shows "t_xon=y"
map <C-S> :echo "abc"<CR>
does nothing (after <C-S> output freezes and subsequent <C-Q>
unfreezes it)
*** When started like this:
TERM=xterm vim
:set termcap
shows "t_xon="
map <C-S> :echo "abc"<CR>
works (after <C-S> one see "abc" string echo-ed)
fixes: vim/vim#12674closes: vim/vim#1454249528da8a6
Co-authored-by: Anton Sharonov <anton.sharonov@gmail.com>
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: noautocmd is confusing; despite its name, it doesn't block all
autocommands (instead it blocks only those related to setting the buffer), and
is commonly used by plugins to open windows while producing minimal
side-effects.
Solution: be consistent and block all autocommands when noautocmd is set.
This includes WinNew (again), plus autocommands from entering the window (if
enter is set) like WinEnter, WinLeave, TabEnter, .etc.
See the discussion at https://github.com/neovim/neovim/pull/14659#issuecomment-2040029517
for more information.
Remove win_set_buf's noautocmd argument, as it's no longer needed.
NOTE: pum_create_float_preview sets noautocmd for win_set_buf, but all its
callers already use block_autocmds.
Despite that, pum_create_float_preview doesn't actually properly handle
autocommands (it has no checks for whether those from win_enter or
nvim_create_buf free the window).
For now, ensure autocommands are blocked within it for correctness (in case it's
ever called outside of a block_autocmds context; the function seems to have been
refactored in #26739 anyway).
Problem: Wrong cursor position after using setcellwidths().
Solution: Invalidate cursor position in addition to redrawing.
(zeertzjq)
closes: vim/vim#1454505aacec6ab
Reorder functions in test_utf8.vim to match upstream.
Add more filters so that LuaJIT can parse headers on macOS 14.
The system headers use a style of enum introduced in C++11 (and allowed
as an extension in C by clang) of the form:
enum Name : Type {
The system headers also use bitfields in the mach_vm_range_recipe* types:
struct Foo { int bar : 32; }
Neither of these constructs can be parsed by LuaJIT, so filter the lines
out. Neither of these declarations are used by neovim's unittests.
There is a (now closed) issue about bitfields for LuaJIT:
https://github.com/LuaJIT/LuaJIT/issues/951Fixes#26145.
Problem: Crash when using heredoc with comment in command block.
Solution: Handle a newline more like the end of the line, fix coverity
warning (zeertzjq).
closes: vim/vim#145351f5175d9af
If the filename passed to vim_FullName() is a relative directory, and
does not exist, it is appended to the current working directory. Since
the return value of append_path() was ignored, and if the buffer length
was too small to fit getcwd() + dirname(filename), it would still try to
append the basename(filename).
This was manifesting as a failure in test/unit/path_spec.lua in:
itp('fails and uses filename if given filename contains non-existing directory', ..
This failure occurs when running the tests from directory with a short
path such as: /work/src/nv
test/unit/path_spec.lua:420: Expected objects to be the same.
Passed in:
(string) '/work/src/nv/test.file'
Expected:
(string) 'non_existing_dir/test.file'
This return value for the second call to append_path() to append
basename(filename) was checked, and this is where it would fail for
normal / longer getcwd()s.
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
LuaJIT does not handle -0.0 correctly in 'dual number mode' (which is
the default, and only supported mode for LuaJIT arm64). If LuaJIT is
forced to use 'dual number mode' on X64 (where the default is single),
this test will fail in the same manner.
Fix this by using tonumber("-0.0") instead of a -0.0 literal.
See: https://github.com/LuaJIT/LuaJIT/issues/858
Problem: filetype: some history files are not recognized
Solution: Add some history patterns to filetype.vim
(Wu, Zhenyu)
closes: vim/vim#14513da70feabea
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: xilinx files are not recognized
Solution: Add a few xilinx specific file patterns,
inspect lpr files for being xml/pascal
(Wu, Zhenyu)
closes: vim/vim#14454614691ceef
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: some TeX files are not recognized
Solution: Add more patterns for TeX files and inspect
a few more files for being TeX files
(Wu, Zhenyu)
closes: vim/vim#1445661ee833a50
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Run the global before_each() before all other before_each(), so that
clear() uses the test ID of the current test, not the previous one.
Don't skip generating test IDs for skipped tests, as that'll make a
skipped test have the same test ID as the previous one.
Problem: Patch 9.1.0296 causes too many issues
(Tony Mechelynck, chdiza, CI)
Solution: Back out the change for now
Revert "patch 9.1.0296: regexp: engines do not handle case-folding well"
This reverts commit 7a27c108e0509f3255ebdcb6558e896c223e4d23 it causes
issues with syntax highlighting and breaks the FreeBSD and MacOS CI. It
needs more work.
fixes: vim/vim#14487c97f4d61cd
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: heredoc start may be recognized in string.
Solution: Don't skip to closing bracket for invalid list assignment.
(zeertzjq)
closes: vim/vim#144721817ccdb10
Problem: Missing test for what patch v9.1.0285 fixes
Solution: Add a test for cursor movement at buffer boundaries.
(Luuk van Baal)
aa8e22b035
vim-patch:9.1.0225: test_matchparen not run in CI
Problem: test_matchparen not run in CI
Solution: add test_matchparen.res to NEW_TESTS_RES in Makefile,
update changed highlighting dump from v9.1.61
059aeac2be
Changes N/A and test result was restored in patch 9.1.0258 (included in #28160).
