Problem: eval5() and eval7 are too complex
Solution: Refactor eval5() and eval7() in eval.c
(Yegappan Lakshmanan)
closes: vim/vim#14900734286e4c6
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
- Make diff colors more accessible, Green for added, Red for deleted, Blue for Changed
- Change Search to blue to be visible with Diff colors
- Change Todo to bright magenta
closes: vim/vim#15400d88ebcbd9f
Co-authored-by: Maxim Kim <habamax@gmail.com>
- Add PmenuMatch and PmenuMatchSel to all colorschemes
- Add contrast to habamax Type, String, Constant and PreProc
- Change habamax PmenuSel to neutral gray to make PmenuMatchSel more visible
- Change habamax Tabline and VertSplit
- Make Conceal less visible for zellner, torte, shine, ron, peachpuff,
pablo, morning, koehler, evening, delek, blue, darkblue, lunaperche,
retrobox
- Add Added/Changed/Removed highlights
- Fix retrobox Terminal background
- Other minor fixes and improvements
closes: vim/vim#15267fcc53461d4
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem:
Some language servers (e.g., rust-analyzer, texlab) are desynced when
the user deletes the entire contents of the buffer. This is due to the
discrepancy between how nvim computes diff and how nvim treats empty
buffer.
* diff: If the buffer became empty, then the diff includes the last
line's eol.
* empty buffer: Even if the buffer is empty, nvim regards it as having
a single empty line with eol.
Solution:
Add special case for diff computation when the buffer becomes empty so
that it does not include the eol of the last line.
Problem: CompletionItem in lsp spec mentioned the deprecated attribute
Solution: when item has deprecated attribute set hl_group to DiagnosticDeprecated
in complete function
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem: Coverity warning after 9.1.0440
Solution: Fix Coverity warning, add a test and
reduce the calls to clear_tv()
(Yegappan Lakshmanan).
closes: vim/vim#14845dbac0da631
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: eval.c not sufficiently tested
Solution: Add a few more additional tests for eval.c,
(Yegappan Lakshmanan)
closes: vim/vim#147994776e64e72
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Some functions are not tested
Solution: Add a few more tests, fix a few minor problems
(Yegappan Lakshmanan)
closes: vim/vim#14789fe424d13ef
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cannot use a method with a complex expression.
Solution: Evaluate the expression after "->" and use the result.
c665dabdf4
Cherry-pick a "verbose" check from patch 8.2.4123.
N/A patches for version.c:
vim-patch:8.2.4102: Vim9: import cannot be used after method
vim-patch:8.2.4110: Coverity warns for using NULL pointer
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot use += to append to empty NULL list.
Solution: Copy the list instead of extending it. (closesvim/vim#6998)
81ed496048
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: regex: wrong match when searching multi-byte char
case-insensitive (diffsetter)
Solution: Apply proper case-folding for characters and search-string
This patch does the following 4 things:
1) When the regexp engine compares two utf-8 codepoints case
insensitive it may match an adjacent character, because it assumes
it can step over as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some
single-byte value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte value
's' by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
* we try to match the correct length for the pattern and the text
* in case of a match, we step over it correctly
There is one tricky thing for the backtracing engine. We also need to
calculate correctly the number of bytes to compare the 2 different
utf-8 strings s1 and s2. So we will count the number of characters in
s1 that the byte len specified. Then we count the number of bytes to
step over the same number of characters in string s2 and then we can
correctly compare the 2 utf-8 strings.
2) A similar thing can happen for the NFA engine, when skipping to the
next character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over.
So this needs to be adjusted in find_match_text() as well.
3) A related issue turned out, when prog->match_text is actually empty.
In that case we should try to find the next match and skip this
condition.
4) When comparing characters using collections, we must also apply case
folding to each character in the collection and not just to the
current character from the search string. This doesn't apply to the
NFA engine, because internally it converts collections to branches
[abc] -> a\|b\|c
fixes: vim/vim#14294closes: vim/vim#1475622e8e12d9f
N/A patches:
vim-patch:9.0.1771: regex: combining chars in collections not handled
vim-patch:9.0.1777: patch 9.0.1771 causes problems
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Illegal memory access when pattern starts with illegal byte.
Solution: Do not match a character with an illegal byte.
f50940531d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Opening a zipfile from HTTP gives an empty buffer.
Solution: Ensure that the magic bytes check does not
skip protocol processing.
Also use readblob() and remove commented out lines.
closes: vim/vim#15396c4be066817
Co-authored-by: Damien <141588647+xrandomname@users.noreply.github.com>
Problem:
Variables are often assigned multiple places in common patterns.
Solution:
Replace these common patterns with different patterns that reduce the
number of assignments.
Use `MAX` and `MIN`:
```c
if (x < y) {
x = y;
}
// -->
x = MAX(x, y);
```
```c
if (x > y) {
x = y;
}
// -->
x = MIN(x, y);
```
Use ternary:
```c
int a;
if (cond) {
a = b;
} els {
a = c;
}
// -->
int a = cond ? b : c;
```
Problem: Cannot use items() on a string.
Solution: Make items() work on a string. (closesvim/vim#11016)
3e518a8ec7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: items() does not work on a list. (Sergey Vlasov)
Solution: Make items() work on a list. (closesvim/vim#11013)
976f859763
Skip CHECK_LIST_MATERIALIZE.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Check that mapping rhs starts with lhs doesn't work if lhs is
not simplified.
Solution: Keep track of the mapblock containing the alternative lhs and
also compare with it (zeertzjq).
fixes: vim/vim#15376closes: vim/vim#153849d997addc7
Cherry-pick removal of save_m_str from patch 8.2.4059.
Problem: E1510 may happen when formatting a message
(after 9.1.0181).
Solution: Only give E1510 when using typval. (zeertzjq)
closes: vim/vim#153910dff31576a
**Problem:** With anonymous nodes toggled in the inspect tree, only
named nodes will be highlighted when moving the cursor in the source
code buffer.
**Solution:** Retrieve the anonymous node at the cursor (when toggled on
in the inspect tree) and highlight them when appropriate, for better
clarity/specificity.
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem: filetype: SuperHTML template files not recognized
Solution: Update the filetype detection code to detect '*.shtml' either
as HTML (Server Side Includes) or SuperHTML (template files)
(EliSauder)
related: vim/vim#15355
related: vim/vim#15367e57c9a19ed
Co-authored-by: EliSauder <24995216+EliSauder@users.noreply.github.com>
Full support (including for components) was finished with this commit:
ee90dad771closes: vim/vim#153744c45425c10
Co-authored-by: josch <josch@debian.org>
Reverts https://github.com/neovim/neovim/pull/29212 and adds a few
additional test cases
From the spec
> All text edits ranges refer to positions in the document they are
> computed on. They therefore move a document from state S1 to S2 without
> describing any intermediate state. Text edits ranges must never overlap,
> that means no part of the original document must be manipulated by more
> than one edit. However, it is possible that multiple edits have the same
> start position: multiple inserts, or any number of inserts followed by a
> single remove or replace edit. If multiple inserts have the same
> position, the order in the array defines the order in which the inserted
> strings appear in the resulting text.
The previous fix seems wrong. The important part:
> If multiple inserts have the same position, the order in the array
> defines the order in which the inserted strings appear in the
> resulting text.
Emphasis on _appear in the resulting text_
Which means that in:
local edits1 = {
make_edit(0, 3, 0, 3, { 'World' }),
make_edit(0, 3, 0, 3, { 'Hello' }),
}
`World` must appear before `Hello` in the final text. That means the old
logic was correct, and the fix was wrong.
Problem: Rename of pum hl_group is incomplete in source.
Solution: Also rename the test function. Rename to user_hlattr in code
to avoid confusion with pum_extra. Add test with matched text
highlighting (zeertzjq).
closes: vim/vim#153484100852e09
