Problem: marker folds may get corrupted on undo (Yousef Mohammed)
Solution: when adjusting folds, make sure that line1 is the lower limit
and line2 is the upper line limit. In particular, line2 should
not be able to get smaller than line1.
fixes: vim/vim#15455closes: vim/vim#154668d02e5cf96
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Contents of terminal buffer are not reflown when Nvim is
resized.
Solution: Enable reflow in libvterm by default. Now that libvterm is
vendored, also fix "TUI rapid resize" test failures there.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
Problem: Some other options reset curswant unnecessarily when set.
(Andrew Haust)
Solution: Don't reset curswant when setting 'comments', 'commentstring'
or 'define' (zeertzjq)
fixes: vim/vim#15462closes: vim/vim#15467b026a293b1
Problem: Renaming a buffer on startup may cause using freed memory.
Solution: Check if the buffer is used in a window. (closesvim/vim#8955)
d3710cf01e
Cherry-pick Test_echo_true_in_cmd() from Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: tests: zip test still resets 'shellslash' option
Solution: Remove resetting the 'shellslash' option, the zip
plugin should now be able to handle this options
closes: vim/vim#1543491efcd115e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: the zip plugin is not tested.
Solution: include tests (Damien)
closes: vim/vim#15411d7af21e746
Co-authored-by: Damien <141588647+xrandomname@users.noreply.github.com>
This also makes shada reading slightly faster due to avoiding
some copying and allocation.
Use keysets to drive decoding of msgpack maps for shada entries.
Problem: [security] double-free in dialog_changed()
(SuyueGuo)
Solution: Only clear pointer b_sfname pointer, if it is different
than the b_ffname pointer. Don't try to free b_fname,
set it to NULL instead.
fixes: vim/vim#15403
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-46pw-v7qw-xc2fb29f4abcd4
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: goaccess config file not recognized
Solution: detect 'goaccess.conf' as goaccess filetype, also
include a basic syntax and ftplugin (Adam Monsen)
Add syntax highlighting for GoAccess configuration file.
GoAccess is a real-time web log analyzer and interactive viewer that
runs in a terminal in *nix systems or through your browser.
GoAccess home page: https://goaccess.iocloses: vim/vim#154140aa65b48fb
Co-authored-by: Adam Monsen <haircut@gmail.com>
Problem:
Tests have lots of exec_lua calls which input blocks of code
provided as unformatted strings.
Solution:
Teach exec_lua how to handle functions.
Problem: Calling a function from an "expr" option has too much overhead.
Solution: Add call_simple_func() and use it for 'foldexpr'
87b4e5c5db
Cherry-pick a call_func() change from patch 8.2.1343.
Add expr-option-function docs to options.txt.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: using a script-local function requires using "s:" when
setting 'completefunc'.
Solution: Do not require "s:" in Vim9 script. (closesvim/vim#9796)
1fca5f3e86
vim-patch:8.2.4417: using NULL pointer
Problem: Using NULL pointer.
Solution: Set offset after checking for NULL pointer.
e89bfd212b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ex: trailing dot is optional for :g and :insert/:append
Solution: don't break out early, when the next command is empty.
(Mohamed Akram)
The terminating period is optional for the last command in a global
command list.
closes: vim/vim#154070214680a8e
Co-authored-by: Mohamed Akram <mohd.akram@outlook.com>
Problem: [security] use-after-free in tagstack_clear_entry
(Suyue Guo )
Solution: Instead of manually calling vim_free() on each of the tagstack
entries, let's use tagstack_clear_entry(), which will
also free the stack, but using the VIM_CLEAR macro,
which prevents a use-after-free by setting those pointers
to NULL
This addresses CVE-2024-41957
Github advisory:
https://github.com/vim/vim/security/advisories/GHSA-f9cr-gv85-hcr48a0bbe7b8a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in check_argument_type
Solution: Reset function type pointer when freeing the function type
list
function pointer fp->uf_func_type may point to the same memory, that was
allocated for fp->uf_type_list. However, when cleaning up a function
definition (e.g. because it was invalid), fp->uf_type_list will be
freed, but fp->uf_func_type may still point to the same (now) invalid
memory address.
So when freeing the fp->uf_type_list, check if fp->func_type points to
any of those types and if it does, reset the fp->uf_func_type pointer to
the t_func_any (default) type pointer
closes: vim/vim#136520f28791b21
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in exec_instructions()
Solution: get tv pointer again
[security]: use-after-free in exec_instructions()
exec_instructions may access freed memory, if the GA_GROWS_FAILS()
re-allocates memory. When this happens, the typval tv may still point to
now already freed memory. So let's get that pointer again and compare it
with tv. If those two pointers differ, tv is now invalid and we have to
refresh the tv pointer.
closes: vim/vim#136215dd41d4b63
Co-authored-by: Christian Brabandt <cb@256bit.org>
`buf.code_action` always included diagnostics on a given line from all
clients. Servers should only receive diagnostics they published, and in
the exact same format they sent it.
Should fix https://github.com/neovim/neovim/issues/29500
Problem: Cannot use an autoload function from a package under start.
Solution: Also look in the "start" package directory. (Bjorn Linse,
closesvim/vim#7193)
223a950a85
Nvim already does this in do_in_cached_path(), and this change has no
effect in Nvim as Nvim removes DIP_START after do_in_cached_path().
Accidentally failed to mark as ported:
vim-patch:8.2.1731: Vim9: cannot use += to append to empty NULL list
Co-authored-by: bfredl <bjorn.linse@gmail.com>
Problem:
Some language servers (e.g., rust-analyzer, texlab) are desynced when
the user deletes the entire contents of the buffer. This is due to the
discrepancy between how nvim computes diff and how nvim treats empty
buffer.
* diff: If the buffer became empty, then the diff includes the last
line's eol.
* empty buffer: Even if the buffer is empty, nvim regards it as having
a single empty line with eol.
Solution:
Add special case for diff computation when the buffer becomes empty so
that it does not include the eol of the last line.
Problem: CompletionItem in lsp spec mentioned the deprecated attribute
Solution: when item has deprecated attribute set hl_group to DiagnosticDeprecated
in complete function
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem: eval.c not sufficiently tested
Solution: Add a few more additional tests for eval.c,
(Yegappan Lakshmanan)
closes: vim/vim#147994776e64e72
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Some functions are not tested
Solution: Add a few more tests, fix a few minor problems
(Yegappan Lakshmanan)
closes: vim/vim#14789fe424d13ef
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: regex: wrong match when searching multi-byte char
case-insensitive (diffsetter)
Solution: Apply proper case-folding for characters and search-string
This patch does the following 4 things:
1) When the regexp engine compares two utf-8 codepoints case
insensitive it may match an adjacent character, because it assumes
it can step over as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some
single-byte value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte value
's' by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
* we try to match the correct length for the pattern and the text
* in case of a match, we step over it correctly
There is one tricky thing for the backtracing engine. We also need to
calculate correctly the number of bytes to compare the 2 different
utf-8 strings s1 and s2. So we will count the number of characters in
s1 that the byte len specified. Then we count the number of bytes to
step over the same number of characters in string s2 and then we can
correctly compare the 2 utf-8 strings.
2) A similar thing can happen for the NFA engine, when skipping to the
next character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over.
So this needs to be adjusted in find_match_text() as well.
3) A related issue turned out, when prog->match_text is actually empty.
In that case we should try to find the next match and skip this
condition.
4) When comparing characters using collections, we must also apply case
folding to each character in the collection and not just to the
current character from the search string. This doesn't apply to the
NFA engine, because internally it converts collections to branches
[abc] -> a\|b\|c
fixes: vim/vim#14294closes: vim/vim#1475622e8e12d9f
N/A patches:
vim-patch:9.0.1771: regex: combining chars in collections not handled
vim-patch:9.0.1777: patch 9.0.1771 causes problems
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Illegal memory access when pattern starts with illegal byte.
Solution: Do not match a character with an illegal byte.
f50940531d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use items() on a string.
Solution: Make items() work on a string. (closesvim/vim#11016)
3e518a8ec7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: items() does not work on a list. (Sergey Vlasov)
Solution: Make items() work on a list. (closesvim/vim#11013)
976f859763
Skip CHECK_LIST_MATERIALIZE.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Check that mapping rhs starts with lhs doesn't work if lhs is
not simplified.
Solution: Keep track of the mapblock containing the alternative lhs and
also compare with it (zeertzjq).
fixes: vim/vim#15376closes: vim/vim#153849d997addc7
Cherry-pick removal of save_m_str from patch 8.2.4059.
Problem: E1510 may happen when formatting a message
(after 9.1.0181).
Solution: Only give E1510 when using typval. (zeertzjq)
closes: vim/vim#153910dff31576a
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem: filetype: SuperHTML template files not recognized
Solution: Update the filetype detection code to detect '*.shtml' either
as HTML (Server Side Includes) or SuperHTML (template files)
(EliSauder)
related: vim/vim#15355
related: vim/vim#15367e57c9a19ed
Co-authored-by: EliSauder <24995216+EliSauder@users.noreply.github.com>
Reverts https://github.com/neovim/neovim/pull/29212 and adds a few
additional test cases
From the spec
> All text edits ranges refer to positions in the document they are
> computed on. They therefore move a document from state S1 to S2 without
> describing any intermediate state. Text edits ranges must never overlap,
> that means no part of the original document must be manipulated by more
> than one edit. However, it is possible that multiple edits have the same
> start position: multiple inserts, or any number of inserts followed by a
> single remove or replace edit. If multiple inserts have the same
> position, the order in the array defines the order in which the inserted
> strings appear in the resulting text.
The previous fix seems wrong. The important part:
> If multiple inserts have the same position, the order in the array
> defines the order in which the inserted strings appear in the
> resulting text.
Emphasis on _appear in the resulting text_
Which means that in:
local edits1 = {
make_edit(0, 3, 0, 3, { 'World' }),
make_edit(0, 3, 0, 3, { 'Hello' }),
}
`World` must appear before `Hello` in the final text. That means the old
logic was correct, and the fix was wrong.
