Problem: Matched text isn't highlighted in cmdline pum.
Solution: Use cmdline completion pattern in cmdline mode.
(zeertzjq)
closes: vim/vim#15029d8c9340fc6
Cherry-pick syntax.txt change from runtime update.
Problem: Cmdline pum doesn't work properly with 'rightleft'.
Solution: Don't use curwin->w_p_rl in cmdline mode in pum_redraw(). Use
a static variable since pum_may_redraw() may be called in any
mode. Also correct position of other popups with 'rightleft'.
(zeertzjq)
closes: vim/vim#15005883018feff
Problem: CI fails with t_?? test
Solution: use assert_match instead of assert_equal
and test only until t_xo, depending on system
there may be several more termcap codes coming
0d87e3c711
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: When used terminal with XON/XOFF flow control, vim tries to
still make CTRL-S mapping available, which results in severe
screen corruption, especially on large redraws, and even
spurious inputs (John Tsiombikas)
Solution: Disallow CTRL-S mapping if such terminal is recognized.
Don't remove IXON from the bitmask inversion.
(Anton Sharonov)
*** When started like this:
TERM=vt420 vim
:set termcap
shows "t_xon=y"
map <C-S> :echo "abc"<CR>
does nothing (after <C-S> output freezes and subsequent <C-Q>
unfreezes it)
*** When started like this:
TERM=xterm vim
:set termcap
shows "t_xon="
map <C-S> :echo "abc"<CR>
works (after <C-S> one see "abc" string echo-ed)
fixes: vim/vim#12674closes: vim/vim#1454249528da8a6
Co-authored-by: Anton Sharonov <anton.sharonov@gmail.com>
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
fixesvim/vim#13894closes: vim/vim#140820dc0bff000
Cherry-pick test_cmdline.vim from patch 9.1.0019 as it already passes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Autocmds triggered from opening the cmdwin (in win_split and
do_ecmd) can cause issues such as E199, as the current checks
are insufficient.
Solution: Commands executed from the cmdwin apply to the old curwin/buf,
so they should be kept in a "suspended" state; abort if
they've changed. Also abort if cmdwin/buf was tampered with,
and check that curwin is correct. Try to clean up the cmdwin
buffer (only if hidden and non-current to simplify things; the
same approach is used when closing cmdwin normally), and add a
beep. (Sean Dewar)
Rename the old Test_cmdwin_interrupted() like in the patch (can be moved to
test_cmdwin.vim when v9.0.0027 is ported).
Move the error message to `e_active_window_or_buffer_changed_or_deleted`.
43b395ec2e
Problem: default diff highlighting is too noisy
Solution: Link diff highlighting groups to new
Added/Removed/Changed, revert previous change
(Romain Lafourcade)
Remove diff* links added in vim/vim#13776 and doc added in commit b1392be
The links added in vim/vim#13776 are way too noisy for the contexts in which
the `diff` syntax is applied (git commits, patches, etc.).
This commit:
- removes those links
- adds new default highlighting groups Added, Changed and
Removed
- links the diff highlighting groups to those new defaults
- removes the doc changes
- adjusts the syntax_completion test for those newly added group
names
Note: Changes to the default color schemes will be handled separately,
by adding links to those newly created Added/Removed/Changed
highlighting groups.
related: vim/vim#13776closesvim/vim#13825124371c5a1
Co-authored-by: Romain Lafourcade <romain.lafourcade@razorfish.fr>
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: vim/vim#1369281642d9d6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Tests are flaky because of using a common file name.
Solution: Rename files and directories to be more unique.
61abe7d8f8
Cherry-pick Test_custom_complete_autoload() from patch 8.2.4584.
Cherry-pick test_delete.vim & test_edit.vim changes from patch 9.0.0323.
Cherry-pick test_edit.vim changes from patch 8.2.3637.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Custom cmdline completion skips original cmdline when pressing
Ctrl-P at first match if completion function invokes glob().
Solution: Move orig_save into struct expand_T.
closes: vim/vim#1321628a23602e8
Problem: Test for cmdline window and terminal fails on MS-Windows.
Solution: Skip the test on MS-Windows.
0b49648486
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using a terminal popup window from the cmdline window.
Solution: Instead of checking cmdwin_type call cmdwin_is_active().
(closesvim/vim#8286)
e5b4486c42
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests using term_wait() can still be flaky.
Solution: Increase the wait time when rerunning a test. (James McCoy,
closesvim/vim#5899) Halve the initial times to make tests run faster
when there is no rerun.
6a2c5a7dd5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: no support for custom cmdline completion
Solution: Add new vimscript functions
Add the following two functions:
- getcmdcompltype() returns custom and customlist functions
- getcompletion() supports both custom and customlist
closes: vim/vim#1222892997dda78
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: getcompletion() "cmdline" fails after :autocmd
Solution: Use set_cmd_context() instead of set_one_cmd_context().
closes: vim/vim#12804e4c79d3615
Problem: getcompletion() failes for user-defined commands
Solution: set context for completion function
closes: vim/vim#12681closes: vim/vim#126808ef1fbc0c3
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Expanding a pattern interferes with command line completion.
Solution: Set the file index only when appropriate. (closesvim/vim#12519)
094dd152fe
Problem: Some tests are slow.
Solution: Make a few test cases faster.
bf63011a52
Cherry-pick related test_cmdline.vim changes from patch 9.0.0418.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Error message for wrong argument type is not specific.
Solution: Include more information in the error. (Yegappan Lakshmanan,
closesvim/vim#11037)
8deb2b30c7
Skip reduce() and deepcopy() changes because of missing patches.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Ruler not drawn correctly when using 'rulerformat'.
Solution: Adjust formatting depending on whether the ruler is drawn in the
statusline or the command line. (Sean Dewar, closesvim/vim#12246)
fc8a601c32
This issue was made apparent after neovim/neovim@0f1e2b6, as `showmode()` calls
`win_redr_ruler()` with `curwin` now if it's floating, rather than the last
window if there's no statusline (which usually already shares its right side
with that of the editor).
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: Crash when passing NULL to setcmdline(). (Andreas Louv)
Solution: Use tv_get_string() instead of using v_string directly.
(closesvim/vim#12231, closesvim/vim#12227)
ac6cd31afc
