Problem: splitting is disallowed in some cases to prevent the window layout
changes while a window is closing, but it's not checked for.
Solution: check for this, and set the API error message directly.
(Also sneak in a change to tui.c that got lost from #27352; it's a char* buf,
and the memset is assuming one byte each anyway)
Problem: WinNew and win_enter autocommands can delete the target buffer to
switch to, causing a heap-use-after-free.
Solution: store a bufref to the buffer, check it before attempting to switch.
Problem: if switch_win{_noblock} fails to restore the old curwin after WinNew
(e.g: it was closed), wp will become the new curwin, but win_set_buf enter
events would still be blocked if !enter && !noautocmd.
Solution: fire them, as we've actually entered the new window.
Note: there's a problem of switch_win{_noblock} failing to restore the old
curwin, leaving us in wp without triggering WinEnter/WinLeave, but this affects
all callers of switch_win{_noblock} anyways. (It's also not clear how WinLeave
can be called if the old curwin was closed already).
Problem: BufWinEnter is not fired when not entering a new window, even when a
different buffer is specified and buffer-related autocommands are unblocked
(!noautocmd).
Solution: fire it in the context of the new window and buffer. Do not do it if
the buffer is unchanged, like :{s}buffer.
Be wary of autocommands! For example, it's possible for nvim_win_set_config to
be used in an autocommand to move a window to a different tabpage (in contrast,
things like wincmd T actually create a *new* window, so it may not have been
possible before, meaning other parts of Nvim could assume windows can't do
this... I'd be especially cautious of logic that restores curwin and curtab
without checking if curwin is still valid in curtab, if any such logic exists).
Also, bail early from win_set_buf if setting the temp curwin fails; this
shouldn't be possible, as the callers check that wp is valid, but in case that's
not true, win_set_buf will no longer continue setting a buffer for the wrong
window.
Note that pum_create_float_preview also uses win_set_buf, but from a glance,
doesn't look like it properly checks for autocmds screwing things up (win_enter,
nvim_create_buf...). I haven't addressed that here.
Also adds some test coverage for nvim_open_win autocommands.
Closes#27121.
Problem: win_set_config should have the observable effect of moving an existing
window to another place, but instead fires autocommands as if a new window was
created and entered (and does not fire autocommands reflecting a "return" to the
original window).
Solution: do not fire win_enter-related autocommands when splitting the window,
but continue to fire them when entering the window that fills the new space when
moving a window to a different tabpage, as the new curwin changes.
Also, remove "++once" from the WinEnter autocmd in the other test, as omitting
it also crashed Nvim before this fix.
Problem: win_enter autocommands can close new_curwin, crashing if it was the
last window in its tabpage after removing win, or can close parent, crashing
when attempting to split it later.
Solution: remove win first, check that parent is valid after win_enter.
NOTE: This isn't actually quite right, as this means win is not in the window
list or even has a frame when triggering enter autocommands (so it's not
considered valid in the tabpage). This is addressed in later commits.
Problem: 'shortmess' "F" flag doesn't work properly with 'autoread'
(after 9.1.0154)
Solution: Hide the file info message instead of the warning dialog
(zeertzjq)
closes: vim/vim#14159closes: vim/vim#141588a01744c56
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: vim/vim#141540df8f93bda
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: vim/vim#1413184bf6e658d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Text is not redrawn with 'relativenumber' when only the 'statuscolumn' is redrawn after inserted lines.
Solution: Force a full redraw if statuscolumn width changed.
Problem:
`vim.lsp.util.rename()` deletes the buffers that are affected by
renaming. This has undesireable side effects. For example, when renaming
a directory, all buffers under that directory are deleted and windows
displaying those buffers are closed. Also, buffer options may change
after renaming.
Solution:
Rename the buffers with :saveas.
An alternative approach is to record all the relevant states and restore
it after renaming, but that seems to be more complex. In fact, the older
version was attempting to restore the states but only partially and
incorrectly.
- Added `@inlinedoc` so single use Lua types can be inlined into the
functions docs. E.g.
```lua
--- @class myopts
--- @inlinedoc
---
--- Documentation for some field
--- @field somefield integer
--- @param opts myOpts
function foo(opts)
end
```
Will be rendered as
```
foo(opts)
Parameters:
- {opts} (table) Object with the fields:
- somefield (integer) Documentation
for some field
```
- Marked many classes with with `@nodoc` or `(private)`.
We can eventually introduce these when we want to.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
Problem: v:echospace wrong after setting invalid value to 'showcmdloc'.
Solution: Only call comp_col() if value is valid.
(zeertzjq)
closes: vim/vim#14119c27fcf4857
Problem: Floats are arbitrarily positioned at 1 row above screen size.
Solution: Position at 1 row above 'cmdheight', only if window is hidden behind the message area.
Problem: the amount of available space (v:echospace) on the command
line is not correct when showcmdloc is drawn into the
statusline or tabline.
Solution: only add SHOWCMD_COLS to the shown command column when
'showcmdloc' is set to last (Sam-programs)
closes: vim/vim#14108062141b1a7
Co-authored-by: Sam-programs <130783534+Sam-programs@users.noreply.github.com>
Problem: getregion() needs more tests
Solution: Run the getregion() test in both the legacy and Vim9 contexts
(Yegappan Lakshmanan)
closes: vim/vim#141144d55c54e30
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: [security]: autocmd cause use-after-free in set_curbuf()
(kawarimidoll)
Solution: check side-effect of BufLeave autocommand, when the number
of windows changed, close windows containing buffers that will
be wiped, if curbuf changed unexpectedly make sure b_nwindows
is decremented otherwise it cannot be wiped
set_curbuf() already makes some efforts to ensure the BufLeave
autocommands do not cause issues. However there are still 2 issues
that are not taken care of:
1) If a BufLeave autocommand opens a new window containing the same
buffer as that is going got be closed in close_buffer() a bit later,
we suddenly have another window open, containing a free'd buffer. So we
must check if the number of windows changed and if it does (and the
current buffer is going to be wiped (according to the 'bufhidden'
setting), let's immediately close all windows containing the current
buffer using close_windows()
2) If a BufLeave autocommand changes our current buffer (displays it in
the current window), buf->b_nwindow will be incremented. As part of
set_curbuf() we will however enter another buffer soon, which means, the
newly created curbuf will have b_nwindows still have set, even so the
buffer is no longer displayed in a window. This causes later problems,
because it will no longer be possible to wipe such a buffer. So just
before entering the final buffer, check if the curbuf changed when
calling the BufLeave autocommand and if it does (and curbuf is still
valid), decrement curbuf->b_nwindows.
Both issues can be verified using the provided test (however the second
issue only because such an impacted buffer won't be wiped, causing
futher issues in later tests).
fixes: vim/vim#13839closes: vim/vim#1410455f8bba73b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: vim/vim#1409019b718828d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Put in Visual mode wrong if it replaces fold marker.
Solution: Temporarily disable folding during put in Visual mode.
(zeertzjq)
fixes: vim/vim#14097closes: vim/vim#141004e141c66b9
Previously rename would unconditionally read the to-be-renamed file from the
disk and write it to the disk. This is redundant in some cases
If the file is not already loaded, it's not attached to lsp client, so nvim
doesn't need to care about this file.
If the file is loaded but has no change, it doesn't need to be written.
Then we can just load metadata in C as a single msgpack blob. Which also
can be used directly as binarly data, instead of first unpacking all the
functions and ui_events metadata to immediately pack it again, which was
a bit of a silly walk (and one extra usecase of `msgpack_rpc_from_object`
which will get yak shaved in the next PR)
Problem: Some LSP servers return `textDocument/documentLink` responses
containing file URIs with line/column numbers in the fragment.
`vim.uri_to_fname` returns invalid file names for these URIs.
Solution: Remove the URI fragment from file URIs.
Problem:
The documentation flow (`gen_vimdoc.py`) has several issues:
- it's not very versatile
- depends on doxygen
- doesn't work well with Lua code as it requires an awkward filter script to convert it into pseudo-C.
- The intermediate XML files and filters makes it too much like a rube goldberg machine.
Solution:
Re-implement the flow using Lua, LPEG and treesitter.
- `gen_vimdoc.py` is now replaced with `gen_vimdoc.lua` and replicates a portion of the logic.
- `lua2dox.lua` is gone!
- No more XML files.
- Doxygen is now longer used and instead we now use:
- LPEG for comment parsing (see `scripts/luacats_grammar.lua` and `scripts/cdoc_grammar.lua`).
- LPEG for C parsing (see `scripts/cdoc_parser.lua`)
- Lua patterns for Lua parsing (see `scripts/luacats_parser.lua`).
- Treesitter for Markdown parsing (see `scripts/text_utils.lua`).
- The generated `runtime/doc/*.mpack` files have been removed.
- `scripts/gen_eval_files.lua` now instead uses `scripts/cdoc_parser.lua` directly.
- Text wrapping is implemented in `scripts/text_utils.lua` and appears to produce more consistent results (the main contributer to the diff of this change).
Problems:
- Illegal bytes after valid UTF-8 char cause utf_cp_*_off() to fail.
- When stream isn't NUL-terminated, utf_cp_*_off() may go over the end.
Solution: Don't go over end of the char of end of the string.
Functions like file_open_new() and file_open_fd_new() which just is a
wrapper around the real functions but with an extra xmalloc/xfree around
is an anti-pattern. If the caller really needs to allocate a
FileDescriptor as a heap object, it can do that directly.
FileDescriptor by itself is pretty much a pointer, or rather two:
the OS fd index and a pointer to a buffer. So most of the time an extra
pointer layer is just wasteful.
In the case of scriptin[curscript] in getchar.c, curscript used
to mean in practice:
N+1 open scripts when curscript>0
zero or one open scripts when curscript==0
Which means scriptin[0] had to be compared to NULL to disambiguate the
curscript=0 case.
Instead, use curscript==-1 to mean that are no script,
then all pointer comparisons dissappear and we can just use an array of
structs without extra pointers.
With "intermediate" flag, only using minimal timeout is too short and
may lead to failures.
Also remove the fallback timeout in screen:expect_unchanged(), as having
a different fallback timeout than screen:expect() is confusing.
Problem: Insufficient testing for 'delcombine'.
Solution: Add test for both Normal and Insert modes without Arabic.
(zeertzjq)
closes: vim/vim#14086cd3a13e774
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
fixesvim/vim#13894closes: vim/vim#140820dc0bff000
Cherry-pick test_cmdline.vim from patch 9.1.0019 as it already passes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: using "C" and 've=all' set, doesn't include composing chars
when changing a line, keeps the composing chars for whatever
is typed afterwards.
Solution: Use mb_head_off() and mb_ptr2len() instead of mb_tail_off().
(zeertzjq)
closes: vim/vim#14083048761bcd4
