Problem: No autocmd triggered in Insert mode with visible popup menu.
Solution: Add TextChangedP. (Prabir Shrestha, Christian Brabandt,
closesvim/vim#2372, closesvim/vim#1691)
Fix that the TextChanged autocommands are not always triggered
when sourcing a script.
5a09343719
OpenBSD's man returns all candidates when searching with -w instead of
the first one it finds. So this patch takes the first one if multiple
entries are found.
closes#8372closes#8341
After this change we never release blocks from memory (in practice it
never happened because the memory limits are never reached). Let the OS
take care of that.
---
On today's systems the 'maxmem' and 'maxmemtot' values are huge (4+ GB)
so the limits are never reached in practice, but Vim wastes a lot of
time checking if the limit was reached.
If the limit is reached Vim starts saving pieces of the swap file that were in
memory to the disk. Said in a different way: Vim implements its own
memory-paging mechanism. This is unnecessary and inefficient since the
operating system already has virtual memory and will swap to the disk if
programs start using too much memory.
This change does...
1. Reduce the number of config options and need for documentation.
2. Make the code more efficient as we don't have to keep track of memory
usage nor check if the memory limits were reached to start swapping
to disk every time we need memory for buffers.
3. Simplify the code. Once memfile.c is simple enough it could be
replaced by actual operating system memory mapping (mmap,
MemoryViewOfFile...). This change does not prevent Vim to recover
changes from swap files since the swapping code is never triggered
with the huge limits set by default.
Remove "" from sys.path (typically the first entry), which could cause
e.g. "logging" to be added from the current directory.
This gets done already for loading the host in
runtime/autoload/provider/pythonx.vim.
ref #6725
fsync() is very slow on some systems. And since the parent commit, Nvim
is smarter about flushing files at certain times (e.g. CursorHold),
regardless of whether 'fsync' is enabled. So it's less risky to disable
'fsync'.
Profiling showed slow (2-4s) :write and :quit caused by fsync():
:quit
shada_write_file(NULL, false);
:write + fsync
0 0x00007f72da567b2d in fsync () at ../sysdeps/unix/syscall-template.S:84
1 0x0000000000638970 in uv__fs_fsync (req=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:150
2 uv__fs_work (w=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:953
3 0x0000000000639a70 in uv_fs_fsync (loop=<optimized out>, req=<optimized out>, file=41, cb=0x7f72da567b2d <fsync+45>)
at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:1094
4 0x0000000000573694 in os_fsync (fd=41) at ../src/nvim/os/fs.c:631
5 0x00000000004ec9dc in buf_write (buf=<optimized out>, fname=<optimized out>, sfname=<optimized out>, start=1, end=1997, eap=0x7fffc864c570,
append=<optimized out>, forceit=<optimized out>, reset_changed=<optimized out>, filtering=<optimized out>) at ../src/nvim/fileio.c:3387
6 0x00000000004b44ff in do_write (eap=0x7fffc864c570) at ../src/nvim/ex_cmds.c:1745
...
:write + nofsync
0 0x00007f72da567b2d in fsync () at ../sysdeps/unix/syscall-template.S:84
1 0x0000000000638970 in uv__fs_fsync (req=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:150
2 uv__fs_work (w=<optimized out>) at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:953
3 0x0000000000639a70 in uv_fs_fsync (loop=<optimized out>, req=<optimized out>, file=36, cb=0x7f72da567b2d <fsync+45>)
at /home/vagrant/neovim/.deps/build/src/libuv/src/unix/fs.c:1094
4 0x0000000000573694 in os_fsync (fd=36) at ../src/nvim/os/fs.c:631
5 0x0000000000528f5a in mf_sync (mfp=0x7f72d8968d00, flags=5) at ../src/nvim/memfile.c:466
6 0x000000000052d569 in ml_preserve (buf=0x7f72d890f000, message=0) at ../src/nvim/memline.c:1659
7 0x00000000004ebadf in buf_write (buf=<optimized out>, fname=<optimized out>, sfname=<optimized out>, start=1, end=1997, eap=0x7fffc864c570,
append=<optimized out>, forceit=<optimized out>, reset_changed=<optimized out>, filtering=<optimized out>) at ../src/nvim/fileio.c:3071
8 0x00000000004b44ff in do_write (eap=0x7fffc864c570) at ../src/nvim/ex_cmds.c:1745
...
children_kill_cb() is racey. One obvious problem is that
process_close_handles() is *queued* by on_process_exit(), so when
children_kill_cb() is invoked, the dead process might still be in the
`loop->children` list. If the OS already reclaimed the dead PID, Nvim
may try to SIGKILL it.
Avoid that by checking `proc->status`.
Vim doesn't have this problem because it doesn't attempt to kill
processes that ignored SIGTERM after a timeout.
closes#8269
Problem: Cannot detect Bazel BUILD files on some systems.
Solution: Check for BUILD after script checks. (Issue vim/vim#1340)
39170e2d97
vim-patch:8.0.1283: test 86 fails under ASAN
Problem: Loading file type detection slows down startup.
Solution: Move functions to an autoload script.
851ee6c3da
---
vim-patch:8.0.0635
Problem: When 'ignorecase' is set script detection is inaccurate.
Solution: Enforce matching case for text. (closes#1753)
closes#7698
Wrapping a command in double-quotes allows cmd.exe to safely dequote the
entire command as if the user entered the entire command in an
interactive prompt. This reduces the need to escape nested and uneven
double quotes.
The `/s` flag of cmd.exe makes the behaviour more reliable:
:set shellcmdflag=/s\ /c
Before this patch, cmd.exe cannot use cygwin echo.exe (as opposed to
cmd.exe `echo` builtin) even if it is wrapped in double quotes.
Example:
:: internal echo
> cmd /s /c " echo foo\:bar" "
foo\:bar"
:: cygwin echo.exe
> cmd /s /c " "echo" foo\:bar" "
foo:bar
Update vim_diff.txt with :lmap differences, update documentation on
'keymap', and add tests.
The tests added are to demonstrate the behaviour specified in the
documentation of :loadkeymap.
I have `g:python3_host_prog` set to the system Python, where a package
is also installed to provide the "neovim" module.
`:checkhealth provider` however displays a warning for this:
> Your virtualenv is not set up optimally.
This is because /usr/bin/python is not in /home/user/.pyenv.
I think this warning should not get displayed if host_prog_var exists.
It goes back to the initial commit (20447ba09), and is maybe only
missing the `!` there as with the previous commit.
Full output:
```
- INFO: pyenv: /home/user/.pyenv/libexec/pyenv
- INFO: pyenv root: /home/user/.pyenv
- INFO: Using: g:python3_host_prog = "/usr/bin/python"
- WARNING: Your virtualenv is not set up optimally (/usr/bin/python is not in /home/user/.pyenv).
- ADVICE:
- Create a virtualenv specifically for Neovim and use `g:python3_host_prog`. This will avoid the need to install Neovim's Python module in each virtualenv.
- WARNING: $VIRTUAL_ENV exists but appears to be inactive. This could lead to unexpected results.
- ADVICE:
- If you are using Zsh, see: http://vi.stackexchange.com/a/7654
- INFO: Executable: /usr/bin/python
- INFO: Python3 version: 3.6.4
- INFO: python-neovim version: 0.2.1
- OK: Latest python-neovim is installed: 0.2.1
```
Currently writedelay shows the sequence of characters that are sent to
the UI/TUI module. Here nvim has already applied an optimization: when
attempting to put a char in a screen cell, if the same char already was
there with the same attributes, UI output is disabled. When debugging
redrawing it it sometimes more useful to inspect the redraw stream one
step earlier, what region of the screen nvim actually is recomputing
from buffer contents (win_line) and from evaluating statusline
expressions.
Take the popupmenu as an example. When closing the popupmenu (in the
TUI), currently 'writedelay' looks like vim only is redrawing the region
which the pum covered. This is not what happens internally: vim redraws
the entire screen, even if only outputs the changed region.
This commit allows negative values of 'writedelay', which causes a delay
for all redrawn characters, even if the character already was displayed
by the UI before.
Most fonts should have these by now. Both are a significant visual
improvement.
- Vertical connecting bar `│` is used by tmux, pstree, Windows 7 cmd.exe
and nvim-qt.exe.
- Middle dot `·` works on Windows 7 cmd.exe, nvim-qt.exe.
For reference: tmux uses these chars to draw lines: │ ├ ─
`g:loaded_python3_provider` gets set when the autoload file is sourced,
but this might error out, e.g. with deoplete:
[deoplete] Failed to load python3 host. You can try to see what happened by starting nvim with $NVIM_PYTHON_LOG_FILE set and opening the generated log file. Also, the host stderr is available in messages.
[deoplete] function remote#define#FunctionBootstrap[1]..remote#host#Require[10]..provider#pythonx#Require[13]..provider#Poll, line 14
[deoplete] deoplete requires Python3 support("+python3").
[deoplete] deoplete failed to load. Try the :UpdateRemotePlugins command and restart Neovim. See also :checkhealth.
It refers to `:checkhealth` from there explicitly, which would then
(without this patch) say that Python 3 is disabled.
This patch changes the reported info to include that it might have been
disabled due to some error, and keeps on going.
Only remove the directory contents. If the directory itself is removed,
then `sudo make install` creates a root-owned …/doc/ directory. That
breaks the next non-root build.
This was an accident of 0b1904d835.
Note: the following does not work, because it misses renamed help files
(which would no longer be in the build-tree definition)
COMMAND ${CMAKE_COMMAND} -E remove ${BUILDDOCFILES} ${GENERATED_HELP_TAGS}
If `jobstart()` fails, then the subsequent `rpcrequest()` will throw due
to an invalid channel id. This causes `job.stderr` not to exist, so we
throw another exception when trying to dump the job's stderr.
Error detected while processing function remote#define#AutocmdBootstrap[1]..remote#host#Require[10]..provider#pythonx#Require:
line 22:
E716: Key not present in Dictionary: stderr
This obfuscates the actual problem.
Problem: The conf filetype detection is done before ftdetect scripts from
packages that are added later.
Solution: Add the FALLBACK argument to :setfiletype. (closesvim/vim#1679,
closesvim/vim#1693)
3e54569b17
Problem: Third item of synconcealed() changes too often. (Dominique Pelle)
Solution: Reset the sequence number at the start of each line.
cc0750dc6ecloses#7589
On some versions of macOS, pbcopy doesn't work in tmux <2.6
https://superuser.com/q/231130
Fallback to tmux in that case.
Add a healthcheck for this scenario.
Per CMAKE docs, CMAKE_HOST_SYSTEM_VERSION is the result of `uname -r`:
https://cmake.org/cmake/help/v3.4/variable/CMAKE_HOST_SYSTEM_VERSION.html?highlight=uname
A numeric version string for the system. On systems that support
uname, this variable is set to the output of uname -r. On other
systems this is set to major-minor version numbers.
On Windows it is something like "6.1", so it won't match ".*-Microsoft".
Closes#7329
Problem: 'hlsearch' highlighting not removed after incsearch (lacygoill)
Solution: Redraw all windows. Start search at the end of the match. Improve
how CTRL-G works with incremental search. Add tests. (Christian
Brabandt, Hirohito Higashi, haya14busa, closesvim/vim#2267)
f8f8b2eadb
Problem: Incremental search only shows one match.
Solution: When 'incsearch' and and 'hlsearch' are both set highlight all
matches. (haya14busa, closesvim/vim#2198)
2e51d9a097
vim-patch:8.0.0431: 'cinoptions' cannot set indent for extern block
Problem: 'cinoptions' cannot set indent for extern block.
Solution: Add the "E" flag in 'cinoptions'. (Hirohito Higashi)
7720ba8599
The argument expansion for :Man depends on the number of arguments given to it
starting at the command itself. But user completion functions always provide the
entire command-line which can include modifier commands like :tab, :vert, etc.
leading to a wrong number of arguments.
Prune all arguments up to :Man.
Fixes#7872.
This should handle most cases where Nvim was invoked as $MANPAGER.
Ultimately the stakes are low: :quit will prompt if there are unsaved
changes.
fix#7873
vim-patch:8.0.0151
Problem: To pass buffer content to system() and systemlist() one has to
first create a string or list.
Solution: Allow passing a buffer number. (LemonBoy,
closesvim/vim#1240)
12c4492dd3
vim-patch:8.0.0153
Problem: system() test fails on MS-Windows.
Solution: Deal when extra space and CR.
9d9c356517
vim-patch:8.0.0154
Problem: system() test fails on OS/X.
Solution: Deal with leading spaces.
31f19ce0a0
Error detected while processing function man#open_page[58]..<SNR>54_put_page:
line 8:
E5105: Error while calling lua chunk: /usr/share/nvim/runtime/lua/man.lua:165: Vim(let):E805: Using a Float as a Number
Until now, the default `:filetype ...` setup was skipped if the user
config touched `:filetype` in any way (including implicitly via `:syntax
on`). No one needs that, and it's very confusing.
Instead, proceed with `:filetype ... on` unless the user explicitly
called `:filetype ... off`.
closes#7765
TERM=konsole-256color is recognized by ncurses.
TERM=konsole-xterm might be more clever, but should not be necessary
(for Nvim at least), we already special-case Konsole in various places.
We may need to clean up some areas that currently assume Konsole always
"pretends xterm" (`TERM=xterm-256color`), though I didn't find any such
cases.
ref #6403
ref https://github.com/neovim/neovim/issues/6403#issuecomment-348713346
Problem: Cannot set a separate highlighting for the current line in the
quickfix window.
Solution: Add QuickFixLine. (anishsane, closesvim/vim#1755)
2102035488
Problem: Cannot easily get to the last quickfix list.
Solution: Add "$" as a value for the "nr" argument of getqflist() and
setqflist(). (Yegappan Lakshmanan)
875feea6ce
For back-compat, :CheckHealth runs :checkhealth. But don't define
:CheckHealth explicitly, it adds noise to wildmenu completion.
Completion of healthchecks doesn't yet work with :checkhealth, this is
a regression but it needs to be implemented for :checkhealth rather than
keeping :CheckHealth around.
vim-patch:8.0.1206: no autocmd for entering or leaving the command line
(commit a4f6cec7a3)
NA patches:
vim-patch:8.0.0320: warning for unused variable with small build
Problem: There is no way to remove quickfix lists (for testing).
Solution: Add the 'f' action to setqflist(). Add tests. (Yegappan
Lakshmanan)
b6fa30ccc3
Problem: When running :make the output may be in the system encoding,
different from 'encoding'.
Solution: Add the 'makeencoding' option. (Ken Takata)
2c7292dc5b
ci: install nodejs 8 in Appveyor, Travis
provider: check node version for debug support
Resolve https://github.com/neovim/neovim/pull/7577#issuecomment-350590592 for Unix.
provider: test if nodejs in ci supports --inspect-brk
nodejs host for neovim requires nodejs 6+ to work properly.
nodejs 6.12+ or 7.6+ is required for debug support via `node --inspect-brk`.
provider: run cli.js of nodejs host directly
npm shims are useless because the user cannot set node to debug mode via
--inspect-brk. This is problematic on Windows which use batchfiles and
shell scripts to compensate for not supporting shebang.
The patch uses `npm root -g` to get the absolute path of the global npm
modules. If that fails, then the user did not install neovim npm package
globally. Use that absolute path to find `neovim/bin/cli.js`, which is
what the npm shim actually runs with node. glob() is for a simple file
check in case bin/ is removed because the npm shims are ignored now.
Use `@cond <something>` to obscure a section from doxygen.
doxygen thinks kvec_withinit_t() is a function. That adds noise to the
generated API documentation, and also prevents the following function
from being noticed.
Get terminal debugging info by starting Nvim with 'verbose' level 3:
nvim -V3log
This is like Vim's `:set termcap`, which was removed in Nvim (and would
be very awkward to restore because of the decoupled UI).
ruby uses batchfiles with 'cmd' extension.
gem creates batchfiles with 'bat' extension.
`gem install rails` does the following in Windows (not Cygwin):
1. Run `gem.cmd install rails` on cmd.exe
2. gem.cmd runs `ruby.exe -x gem install rails`
3. `rails` gem is installed.
`rails.bat` is created in the same directory
where ruby.exe and gem.cmd reside.
Since "builtin" terminfo definitions were implemented (7cbf52db1b),
the decisions made by tui.c and terminfo.c are more relevant. Exposing
that decision in the 'term' option helps with troubleshooting.
Also: remove code that allowed setting t_Co. `:set t_Co=…` has never
worked; the highlight_spec test asserting that nvim_set_option('t_Co')
_does_ work makes no sense, and should not have worked.
vim-patch:fafcf0dd59fd
patch 8.0.1206: no autocmd for entering or leaving the command line
Problem: No autocmd for entering or leaving the command line.
Solution: Add CmdlineEnter and CmdlineLeave.
fafcf0dd59
Problem: The return value of mode() does not indicate that completion is
active in Replace and Insert mode. (Zhen-Huan (Kenny) Hu)
Solution: Add "c" or "x" for two kinds of completion. (Yegappan Lakshmanan,
closesvim/vim#1397) Test some more modes.
e90858d022
The flag enables the current local directory set by ":lcd" to be saved
to views which is the current default behaviour. The option can be
removed to disable this behaviour.
closes#7435
vim-patch:8.0.1289
neovim-ruby-host is a ruby script.
neovim-node-host is a shell script.
Both don't work in cmd.exe so gem and npm provide batchfile shims.
Return the full path of these shims, cmd.exe knows better what to do with these files.
Fix bug that checked for npm AND yarn, where we wanted npm OR yarn.
But since we call `npm` exclusively, and it's highly unlikely you have
yarn installed without npm, let's just remove the yarn check altogether.
Addresses https://github.com/neovim/node-client/issues/41
:checkhealth reports that remote plugins are unregistered
after running :UpdateRemotePlugins because of the backslashes in filepath.
Normalize them to forward slashes because the paths in rplugin.vim are normalized in autoload/remote/host.vim.
vimrc_example.vim is not relevant to Nvim. Anything worth having in
there should be made an actual default.
.gitignore:
- remove *.orig ... super annoying
Nvim note: intentionally did not include `--ttyfail` since its purpose
is not clear. (And it isn't used in any Vim test files/scripts).
---
Problem: When the input or output is not a tty Vim appears to hang.
Solution: Add the --ttyfail argument. Also add the "ttyin" and "ttyout"
features to be able to check in Vim script.
2cab0e1910
