Problem: Unable to predict which byte-offset to place virtual text to
make it repeat visually in the wrapped part of a line.
Solution: Add a flag to nvim_buf_set_extmark() that causes virtual
text to repeat in wrapped lines.
Problem: Maximum callback depth is not configurable.
Solution: Revert patch 9.0.2103. Set 'maxfuncdepth' in test.
fixes: vim/vim#13732closes: vim/vim#13736fe583b1e59
Currently, setting &bg at all re-initializes highlights and reloads
the active colorscheme, even if the actual value of &bg has not changed.
With https://github.com/neovim/neovim/pull/26595 this causes a
regression since &bg is set unconditionally based on the value detected
from the terminal.
Instead, only reload the colorscheme if the actual value of &bg has
changed.
runtime(doc): remove deprecation warning for gdefault
Deprecated can be misunderstood as being slated for removal; slightly
change wording to be clearer.
82f19734bf
Co-authored-by: dundargoc <gocdundar@gmail.com>
Problem:
Unlike termopen(), nvim_open_term() PTYs do not carriage-return the
cursor on newline ("\n") input.
nvim --clean
:let chan_id = nvim_open_term(1, {})
:call chansend(chan_id, ["here", "are", "some", "lines"])
Actual behavior:
here
are
some
lines
Expected behaviour:
here
are
some
lines
Solution:
Add `force_crlf` option, and enable it by default.
Enable 'termguicolors' automatically when Nvim can detect that truecolor
is supported by the host terminal.
If $COLORTERM is set to "truecolor" or "24bit", or the terminal's
terminfo entry contains capabilities for Tc, RGB, or setrgbf and
setrgbb, then we assume that the terminal supports truecolor. Otherwise,
the terminal is queried (using both XTGETTCAP and SGR + DECRQSS). If the
terminal's response to these queries (if any) indicates that it supports
truecolor, then 'termguicolors' is enabled.
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: vim/vim#13588fcaeb3d42b
decor->text.str pointer must go. This removes it for conceal char,
in preparation for a larger PR which will also handle the sign case.
By actually allowing composing chars for a conceal chars, this
becomes a feature and not just a refactor, as a bonus.
runtime(doc): Fix whitespace and formatting of some help files (vim/vim#13549)
596a9f29c8
N/A patch:
vim-patch:aabca259fa48
Co-authored-by: h_east <h.east.727@gmail.com>
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem: recursive callback may cause issues on some archs
Solution: Decrease the limit drastically to 20
Recursive callback limit causes problems on some architectures
Since commit 47510f3d6598a1218958c03ed11337a43b73f48d we have a test
that causes a recursive popup callback function to be executed. However
it seems the current limit of 'maxfuncdepth' option value is still too
recursive for some 32bit architectures (e.g. 32bit ARM).
So instead of allowing a default limit of 100 (default value for
'maxfuncdepth'), let's reduce this limit to 20. I don't think there is a
use case where one would need such a high recursive callback limit and a
limit of 20 seems reasonable (although it is currently hard-coded).
closes: vim/vim#13495closes: vim/vim#135022076463e38
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No way to have extmarks automatically removed when the range it
is attached to is deleted.
Solution: Add new 'invalidate' property that will hide a mark when the
entirety of its range is deleted. When "undo_restore" is set
to false, delete the mark from the buffer instead.
When the terminal emulator sends an OSC sequence to Nvim (as a response
to another OSC sequence that was first sent by Nvim), populate the OSC
sequence in the v:termresponse variable and fire the TermResponse event.
The escape sequence is also included in the "data" field of the
autocommand callback when the autocommand is defined in Lua.
This makes use of the already documented but unimplemented TermResponse
event. This event exists in Vim but is only fired when Vim receives a
primary device attributes response.
Fixes: https://github.com/neovim/neovim/issues/25856
runtime(doc): all secure options should note this restriction in the documentation (vim/vim#13448)
Problem: Not all secure options document their status
Solution: Describe secure context :set restrictions in each help entry
8ebdbc9e6d
Co-authored-by: dkearns <dougkearns@gmail.com>