Improve error messages for `:InspectTree`, when no parsers are available
for the current buffer and filetype. We can show more informative and
helpful error message for users (e.g., which lang was searched for):
```
... No parser available for the given buffer:
+... no parser for 'custom_ft' language, see :help treesitter-parsers
```
Also improve the relevant docs for *treesitter-parsers*.
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: vim/vim#1369281642d9d6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
tmux indicates its RGB support via setrgbb and setrgbf. In modern tmux
code, Tc and RGB just set setrgbb and setrgbf, so we can just check for
them.
Link: 7eb496c00c
Problem: The maximum 'statuscolumn' width and grow behavior is undocumented.
Solution: Define, use and document the maximum 'statuscolumn' width and grow behavior.
Problem:
Many decoration providers (treesitter injection highlighting, semantic
token highlighting, inlay hint) rely on the correctness of the `botline`
argument of `on_win` callback. However, `botline` can be smaller than
the actual line number of the last displayed line if some lines are
folded. In such cases, some decorations will be missing in the lines not
covered by `botline`.
Solution:
Validate `botline` when invoking `on_win`.
NOTE:
It seems that the old code was deliberately avoiding this presumably due
to performance reasons. However, I haven't experienced noticeable lag
after this change, and I believe the cost of botline computation would
be much smaller than the cost of decoration providers.
Problem:
Currently `deepcopy` hashes every single tables it copies so it can be
reused. For tables of mostly unique items that are non recursive, this
hashing is unnecessarily expensive
Solution:
Port the `noref` argument from Vimscripts `deepcopy()`.
The below benchmark demonstrates the results for two extreme cases of
tables of different sizes. One table that uses the same table lots of
times and one with all unique tables.
| test | `noref=false` (ms) | `noref=true` (ms) |
| -------------------- | ------------------ | ----------------- |
| unique tables (50) | 6.59 | 2.62 |
| shared tables (50) | 3.24 | 6.40 |
| unique tables (2000) | 23381.48 | 2884.53 |
| shared tables (2000) | 3505.54 | 14038.80 |
The results are basically the inverse of each other where `noref` is
much more performance on tables with unique fields, and `not noref` is
more performant on tables that reuse fields.
Problem:
For function definitions to be included in the vimdoc (formatted) and
to be exported as mpack data (unformatted), we had two internal
representations of the same function/API metadata in duplicate;
one is FunctionDoc (which was previously a dict), and the other is
doxygen XML DOM from which vimdoc (functions sections) was generated.
Solution:
We should have a single path and unified data representation
(i.e. FunctionDoc) that contains all the metadata and information about
function APIs, from which both of mpack export and vimdoc are generated.
I.e., vimdocs are no longer generated directly from doxygen XML nodes,
but generated via:
(XML DOM Nodes) ------------> FunctionDoc ------> mpack (unformatted)
Recursive Internal |
Formatting Metadata +---> vimdoc (formatted)
This refactoring eliminates the hacky and ugly use of `fmt_vimhelp` in
`fmt_node_as_vimhelp()` and all other helper functions! This way,
`fmt_node_as_vimhelp()` can simplified as it no longer needs to handle
generating of function docs, which needs to be done only in the topmost
level of recursion.
runtime(dist/ft): improve filetype detection for *.v (V/Verilog/Coq)
Patch provided by Dan Alt
closes: vim/vim#1379310b4f75d4c
Co-authored-by: Christian Brabandt <cb@256bit.org>
feat(diagnostic): add `vim.diagnostic.count()`
Problem: Getting diagnostic count based on the output of
`vim.diagnostic.get()` might become costly as number of diagnostic
entries grows. This is because it returns a copy of diagnostic cache
entries (so as to not allow users to change them in place).
Getting information about diagnostic count is frequently used in
statusline, so it is important to be as fast as reasonbly possible.
Solution: Add `vim.diagnostic.count()` which computes severity
counts without making copies.
This reverts commit 5cb906e91c.
They were intentionally fast-tracked.
- `parse_snippet()` because of limited scope, and given that it's kinda
semi-broken (arbitrary formatting rules, not that useful for what it
was used for)
- `extract_completion_items()` doesn't work if we want to add the LSP
completionlist capability
- `text_document_completion_list_to_complete_items()` also doesn't work
for completionlist
Style improvements:
1. Anonymous classes derived from `StructureLiteralType` should have a
better name. The class name can be also nested. Examples:
```diff
----@field serverInfo? anonym1
+---@field serverInfo? lsp._anonym1.serverInfo
```
```diff
----@field insertTextModeSupport? anonym26
+---@field insertTextModeSupport? lsp._anonym26.completionItem.insertTextModeSupport
```
2. Add one separate empty line before each `@field` definition. Without
these, empty lines the doc can look confusing because descriptions
also may contain empty lines. See `lsp.CompletionItem` for example:
```lua
---The kind of this completion item. Based of the kind
---an icon is chosen by the editor.
---@field kind? lsp.CompletionItemKind
---Tags for this completion item.
---
---@since 3.15.0
---@field tags? lsp.CompletionItemTag[]
```
It might feel like "Tags for this completion item" belongs to `kind`,
not `tags` due to the lack of separator blank lines. The following
(after this commit) should look much better:
```diff
---The kind of this completion item. Based of the kind
---an icon is chosen by the editor.
---@field kind? lsp.CompletionItemKind
+---
---Tags for this completion item.
---
---@since 3.15.0
---@field tags? lsp.CompletionItemTag[]
```
3. Escape some LSP-specific annotations that can't be recognized by
lua-ls. It'd be better to make them visible in LSP hover doc windows.
Example: `@sample ...`.
Fixes:
1. A type may extend from more than one base types (as well as mixin
types). Previously only the first base class was being considered,
resulting incomplete base classes for `@class` definitions.
Example: `InlayHintOptions` (should have both of `resolveProvider`
and `workDoneProgress`, the latter is from `WorkDoneProgressOptions`)
```diff
----@class lsp.InlayHintOptions
+---@class lsp.InlayHintOptions: lsp.WorkDoneProgressOptions
```
2. Remove `<200b>` (zero-width space) unicode characters.
3. Add the missing newline at EOF.
The purpose of this commit is to make diff clean and easy to read; to
see the diff resulted from actual changes in gen_lsp.lua, not from the
updated LSP protocol JSON data.
Ran: `nvim -l scripts/gen_lsp.lua gen --methods`
Based on 3.18.0 (2023-12-23)
The following functions should be removed in 0.12 according to the
deprecation strategy in MAINTAIN.md:
- vim.lsp.util.extract_completion_items()
- vim.lsp.util.parse_snippet()
- vim.lsp.util.text_document_completion_list_to_complete_items()
Problem: Unable to predict which byte-offset to place virtual text to
make it repeat visually in the wrapped part of a line.
Solution: Add a flag to nvim_buf_set_extmark() that causes virtual
text to repeat in wrapped lines.
As specified by MAINTAIN.md, features should be soft deprecated at first
(meaning no warnings) to give people a chance to adjust. The problem
with this approach is that deprecating a feature becomes harder than
usual as during the soft deprecation period you need to remember not to
issue a warning, and during the hard deprecation period you need to
remember to start issuing a warning.
This behavior is only enforced if the `plugin` parameter is `nil` as
plugins may not want this specific behavior.
Problem:
A region managed by an injected parser may shrink after re-running the
injection query. If the updated region goes out of the range to be
parsed, then the corresponding tree will remain outdated, possibly
retaining the nodes that shouldn't exist anymore. This results in
outdated highlights.
Solution:
Re-parse an invalid tree if its region intersects the range to be
parsed.
Use the get_language_id client option to resolve the filetype when
matching the document selector in a dynamic capability.
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
refactor(lsp): move glob parsing to vim.glob
Moving the logic for using vim.lpeg to create a match pattern from a
glob into `vim.glob`. There are several places in the LSP spec that
use globs, and it's very useful to have glob matching as a
generally-available utility.
Problem: Maximum callback depth is not configurable.
Solution: Revert patch 9.0.2103. Set 'maxfuncdepth' in test.
fixes: vim/vim#13732closes: vim/vim#13736fe583b1e59
The data to be written can be very long, so use nvim_chan_send() instead
of io.stdout:write() as the latter doesn't handle EAGAIN.
A difference of these two approaches is that nvim_chan_send() writes to
stderr, not stdout, so it won't work if client stderr is redirected.
Problem: Not all default highlight groups show their actual colors.
Solution: Refactor `vimhelp.lua` and apply it to all relevant lists (UI
groups, syntax groups, treesitter groups, LSP groups, diagnostic groups).
- Remove some unused fields
- Prefix classes with `vim.`
- Move around some functions so the query stuff is at the top.
- Improve type hints
- Rework how hl_cache is implemented
Problem: no filetype detection for execline scripts
Solution: Add filetype detection for execline
as a prior to adding syntax support for execline (see
https://github.com/djpohly/vim-execline/issues/2), i went ahead and made
the filetype detection for execline scripts.
closes: vim/vim#13689
Signed-Off-By: Mazunki Hoksaas <rolferen@gmail.com>
63210c214a
Co-authored-by: Mazunki Hoksaas <rolferen@gmail.com>
Diagnostic signs should now be configured with vim.diagnostic.config(),
but "legacy" sign definitions should go through the standard deprecation
process to minimize the impact from breaking changes.
Problem:
Treesitter highlighter's on_line was iterating all the parsed trees,
which can be quite a lot when injection is used. This may slow down
scrolling and cursor movement in big files with many comment injections
(e.g., lsp/_meta/protocol.lua).
Solution:
In on_win, collect trees inside the visible range, and use them in
on_line.
NOTE:
This optimization depends on the correctness of on_win's botline_guess
parameter (i.e., it's always greater than or equal to the line numbers
passed to on_line). The documentation does not guarantee this, but I
have never noticed a problem so far.
Currently, setting &bg at all re-initializes highlights and reloads
the active colorscheme, even if the actual value of &bg has not changed.
With https://github.com/neovim/neovim/pull/26595 this causes a
regression since &bg is set unconditionally based on the value detected
from the terminal.
Instead, only reload the colorscheme if the actual value of &bg has
changed.
runtime(doc): remove deprecation warning for gdefault
Deprecated can be misunderstood as being slated for removal; slightly
change wording to be clearer.
82f19734bf
Co-authored-by: dundargoc <gocdundar@gmail.com>
Comparing against the old value before setting matched the original
C implementation, but there is no reason to use this restriction. In
particular, this inhibits using OptionSet to determine when the option
was set. If users need to handle a case where the option _changed_, it
is easy to do so in an OptionSet autocommand using v:option_new and
v:option_old (and friends).
Anonymous namespaces are more difficult to extend or hook into since
they do not appear in the output of nvim_get_namespaces(). Use named
namespaces instead.
Problem:
Unlike termopen(), nvim_open_term() PTYs do not carriage-return the
cursor on newline ("\n") input.
nvim --clean
:let chan_id = nvim_open_term(1, {})
:call chansend(chan_id, ["here", "are", "some", "lines"])
Actual behavior:
here
are
some
lines
Expected behaviour:
here
are
some
lines
Solution:
Add `force_crlf` option, and enable it by default.
If multiple XTGETTCAP requests are active at once (for example, for
requesting the Ms capability and truecolor capabilities), then the
TermResponse autocommand may fire for capabilities that were not
requested. Instead, make sure that the provided callback is only called
for capabilities that were actually requested.
* Collect on_bytes and flush at the invocation of the scheduled callback
to take account of commands that triggers multiple on_bytes.
* More accurately track movement of folds so that foldexpr returns
reasonable values even when the scheduled computation is not run yet.
* Start computing folds from the line above (+ foldminlines) the changed
lines to handle the folds that are removed due to the size limit.
* Shrink folds that end at the line at which another fold starts to
assign proper level to that line.
* Use level '=' for lines that are not computed yet.
- Improve CLI argument parsing, rejects invalid argument and commands as
early as possible. Also prints USAGE in the command line.
- No longer allows `--<outfile>`, use `--out <outfile>` instead.
- Print a little bit of verbose messages to better know what's going on
rather than remaining silent at all times.
- Add type annotation `gen_lsp._opt` to avoid type warnings.
Enable 'termguicolors' automatically when Nvim can detect that truecolor
is supported by the host terminal.
If $COLORTERM is set to "truecolor" or "24bit", or the terminal's
terminfo entry contains capabilities for Tc, RGB, or setrgbf and
setrgbb, then we assume that the terminal supports truecolor. Otherwise,
the terminal is queried (using both XTGETTCAP and SGR + DECRQSS). If the
terminal's response to these queries (if any) indicates that it supports
truecolor, then 'termguicolors' is enabled.
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Vim does not detect pacman.log file
Solution: Detect pacmanlogs and add syntax highlighting
pacman.log is a filetype common to Arch Liux and related distributions.
Add some simple syntax highlighting for the pacmanlog filetype.
closes: vim/vim#136181e5d66408e
Co-authored-by: Ronan Pigott <ronan@rjp.ie>
PROBLEM: `vim.treesitter.get_node()` does not recognize the `lang` in
the option table. This option was used in somewhere else, for instance,
`vim.treesitter.dev` (for `inspect_tree`) but was never implemented.
SOLUTION: Make `get_node()` correctly use `opts.lang` when getting a
treesitter parser.
Problem: html.angular ft is problematic
Solution: partly revert v9.0.2137
The html.angular filetype causes issues and does not trigger FileType
autocommands for the html or angular filetypes.
So let's roll back that particular change and detect this only as html
file
related: https://github.com/vim/vim/pull/13594#issuecomment-1834465890closes: vim/vim#136044f3480c943
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
`LanguageTree:for_each_tree` calls itself for child nodes, so when we
calls `for_each_tree` inside `for_each_tree`, this quickly leads to
exponential tree calls.
Solution:
Use `pairs(child:trees())` directly in this case, as we don't need the
extra callback for each children, this is already handled from the outer
`for_each_tree` call
When first opened, the tree-sitter inspector traverses all of the nodes
in the buffer to calculate an array of nodes. This traversal is done
only once, and _all_ nodes (both named and anonymous) are included.
Toggling anonymous nodes in the inspector only changes how the tree is
drawn in the buffer, but does not affect the underlying data structure
at all.
When the buffer is traversed and the list of nodes is calculated, we
don't know whether or not anonymous nodes will be displayed in the
inspector or not. Thus, we cannot determine during traversal where to
put closing parentheses. Instead, this must be done when drawing.
When we draw, the tree structure has been flatted into a single array,
so we lose parent-child relationships that would otherwise make
determining the number of closing parentheses straightforward. However,
we can instead rely on the fact that a delta between the depth of a node
and the depth of the successive node _must_ mean that more closing
parentheses are required:
(foo
(bar)
(baz) ↑
│
└ (bar) and (baz) have different depths, so (bar) must have an
extra closing parenthesis
This does not depend on whether or not anonymous nodes are displayed and
so works in both cases.
The OptionSet autocommand does not fire until Vim has finished starting,
so setting 'background' before the VimEnter event would not fire the
OptionSet event. The prior implementation also waited until VimEnter to
set 'background', so this was a regression introduced when moving
background detection into Lua.
Problem: Only injections under the top level tree are found.
Solution: Iterate through all trees to find injections. When two
injections are contained within the same node in the parent tree, prefer
the injection with the larger byte length.
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: vim/vim#13588fcaeb3d42b
tmux intercepts and ignores XTGETTCAP so wrap the query in the tmux
passthrough sequence to make sure the query arrives at the "host"
terminal.
Users must still set the 'allow-passthrough' option in their tmux.conf.
decor->text.str pointer must go. This removes it for conceal char,
in preparation for a larger PR which will also handle the sign case.
By actually allowing composing chars for a conceal chars, this
becomes a feature and not just a refactor, as a bonus.
Problem: not all nushell files detected
Solution: use *.nu to detect nushell files
closes: vim/vim#13586b9efc72c24
Co-authored-by: Daniel Buch Hansen <boogiewasthere@gmail.com>
When parsing with a range, languagetree looks up injections and adds
them if needed. This explicitly invalidates parser, making `is_valid`
report `false` both when including and excluding children.
This is an attempt to describe desired behaviour of `is_valid` in tests,
with what ended up being a single line change to satisfy them.
Add syntax and filetype plugins for SWIG (Simplified Wrapper Interface
Generator) description files.
The default syntax for .i files highlights comments in a reverse
color scheme which doesn't look well. This syntax builds
on vim's c++ syntax by adding highlighting for common swig
directives and user defined directives. For an alternative
syntax, see vimscript vim/vim#1247 (which I found after writing this).
closes: vim/vim#135622e31065a65
Co-authored-by: Julien Marrec <julien.marrec@gmail.com>
Co-authored-by: Matěj Cepl <mcepl@cepl.eu>
runtime(doc): Fix whitespace and formatting of some help files (vim/vim#13549)
596a9f29c8
N/A patch:
vim-patch:aabca259fa48
Co-authored-by: h_east <h.east.727@gmail.com>
Should help with https://github.com/neovim/neovim/issues/23291
On linux `new_fs_event` doesn't support recursive watching, but we can
still use it to watch folders.
The downside of this approach is that we may end up sending some false
`Deleted` events. For example, if you save a file named `foo` there will
be a intermediate `foo~` due to the save mechanism of neovim.
The events we get from vim.uv in that case are:
- rename: foo~
- rename: foo~
- rename: foo
- rename: foo
- change: foo
- change: foo
The mechanism in this PR uses a debounce to reduce this to:
- deleted: foo~
- changed: foo
`foo~` will be the false positive.
I suspect that for the LSP case this is good enough. If not, we may need
to follow up on this and keep a table in memory that tracks available
files.
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Use the XTGETTCAP sequence to determine if the host terminal supports
the OSC 52 sequence and, if it does, enable the OSC 52 clipboard
provider by default.
This is only done automatically when all of the following are true:
1. Nvim is running in the TUI
2. 'clipboard' is not set to unnamed or unnamedplus
3. g:clipboard is unset
4. Nvim is running in an SSH connection ($SSH_TTY is set)
5. Nvim is not running inside tmux ($TMUX is unset)
This fixes an error that can occur in certain pathological cases when
the autocommand fires at just the right time such that it attempts to
close the timer after the timer has already exited, but before the
scheduled callback has fired.
We now let the timer continue to run even when the autocommand deletes
itself to avoid having to repeat the cleanup code multiple times. There
is no harm in letting the timer execute if the autocommand does not
exist, as the pcall will catch the error.
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: vim/vim#13533bc8f79d36a
Co-authored-by: rhysd <lin90162@yahoo.co.jp>
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem:
Platform-specific UI providers should live in `vim.ui.*`. #24164
Solution:
- Move `vim.clipboard.osc52` module to `vim.ui.clipboard.osc52`.
- TODO: move all of `clipboard.vim` to `vim.ui.clipboard`.
ref #25872
Problem: recursive callback may cause issues on some archs
Solution: Decrease the limit drastically to 20
Recursive callback limit causes problems on some architectures
Since commit 47510f3d6598a1218958c03ed11337a43b73f48d we have a test
that causes a recursive popup callback function to be executed. However
it seems the current limit of 'maxfuncdepth' option value is still too
recursive for some 32bit architectures (e.g. 32bit ARM).
So instead of allowing a default limit of 100 (default value for
'maxfuncdepth'), let's reduce this limit to 20. I don't think there is a
use case where one would need such a high recursive callback limit and a
limit of 20 seems reasonable (although it is currently hard-coded).
closes: vim/vim#13495closes: vim/vim#135022076463e38
Co-authored-by: Christian Brabandt <cb@256bit.org>
refactor!: `vim.lsp.inlay_hint()` -> `vim.lsp.inlay_hint.enable()`
Problem:
The LSP specification allows inlay hints to include tooltips, clickable
label parts, and code actions; but Neovim provides no API to query for
these.
Solution:
Add minimal viable extension point from which plugins can query for
inlay hints in a range, in order to build functionality on top of.
Possible Next Steps
---
- Add `virt_text_idx` field to `vim.fn.getmousepos()` return value, for
usage in mappings of `<LeftMouse>`, `<C-LeftMouse>`, etc
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
When pasting with OSC 52 some terminals show a prompt to the user asking
for permission to read from the system clipboard. When this prompt
appears, 1s is not long enough to wait.
Increase the timeout to 10s and show a message to the user indicating
how to interrupt the wait after 1s.
Problem: No way to have extmarks automatically removed when the range it
is attached to is deleted.
Solution: Add new 'invalidate' property that will hide a mark when the
entirety of its range is deleted. When "undo_restore" is set
to false, delete the mark from the buffer instead.
When the terminal emulator sends an OSC sequence to Nvim (as a response
to another OSC sequence that was first sent by Nvim), populate the OSC
sequence in the v:termresponse variable and fire the TermResponse event.
The escape sequence is also included in the "data" field of the
autocommand callback when the autocommand is defined in Lua.
This makes use of the already documented but unimplemented TermResponse
event. This event exists in Vim but is only fired when Vim receives a
primary device attributes response.
Fixes: https://github.com/neovim/neovim/issues/25856
runtime(script.vim): make strace ft check less strict (vim/vim#13482)
Strace output, depending on parameters (-ttf this time), can dump both
times and pid:
1038 07:14:20.959262 execve("./e.py", ["./e.py"], 0x7ffca1422840 /* 51 vars */) = 0 <0.000150>
So loose the regexp matching this, so that the above is matched too.
Fixesvim/vim#13481.
2f54c13292
Co-authored-by: Jiri Slaby <jirislaby@gmail.com>
Co-authored-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>