This changes the behavior of the hl_cache to the old one.
- when the capture exists as a hlgroup -> use it
- when hl_map contains a mapping -> use it
- else do nothing (before: map capture to non-existing capture)
Before also captures `@foo.bar` would intend to use the hlgroup `foo.bar`
which results in a confusing error since hlgroups can't contain dots.
Problem: win_gettype() does not recognize a quickfix window.
Solution: Add "quickfix" and "loclist". (Yegappan Lakshmanan, closesvim/vim#8676)
28d8421bfb
Problem: Location list only has the start position.
Solution: Make it possible to add an end position. (Shane-XB-Qian,
closesvim/vim#8393)
6864efa596
N/A patches for version.c:
vim-patch:8.2.3002: Vim doesn't abort on a fatal Tcl error
Problem: Vim doesn't abort on a fatal Tcl error.
Solution: Change emsg() to iemsg(). (Dominique Pellé, closesvim/vim#8383)
affd0bc626
vim-patch:8.2.3030: Coverity reports a memory leak
Problem: Coverity reports a memory leak.
Solution: Fix the leak and a few typos. (Dominique Pellé, closesvim/vim#8418)
cb54bc6562
Patch v8.2.3022 is mostly N/A but cannot be included here
because of new feature check for "has()".
vim-patch:8.2.3032: build problems with MSVC, other crypt issues with libsodium
Problem: Build problems with MSVC, other crypt issues with libsodium.
Solution: Adjust MSVC makefile. Disable swap file only when 'key' is set.
Adjust error message used when key is wrong. Fix Coverity issues.
(Christian Brabandt, closesvim/vim#8420, closesvim/vim#8411)
226b28b961
vim-patch:8.2.3044: Amiga MorphOS and AROS: process ID is not valid
Problem: Amiga MorphOS and AROS: process ID is not valid.
Solution: Use FindTask to return something which is unique to all processes.
(Ola Söder, closesvim/vim#8444)
3a62b14077
vim-patch:8.2.3046: Amiga MorphOS: Term mode is set using DOS packets
Problem: Amiga MorphOS: Term mode is set using DOS packets.
Solution: Use the same way of setting term mdoe on all next gen Amiga-like
systems. (Ola Söder, closesvim/vim#8445)
b420ac9d20
Problem: Using getchar() in Vim9 script is problematic.
Solution: Add getcharstr(). (closesvim/vim#8343)
3a7503c34c
Cherry-pick Test_getchar() changes from patch v8.1.2304
to sync with upstream.
Port f_getcharstr() to src/nvim/eval/funcs.c, not src/nvim/getchar.c.
Patch v8.1.2042 is not ported yet.
Add a new function to redraw diagnostics from the current diagnostic
cache, without receiving a "publishDiagnostics" message from the server.
This is already being done in two places in the Lua stdlib, so this
function unifies that functionality in addition to providing it to third
party plugins.
An example use case for this could be a command or key-binding for
toggling diagnostics virtual text. The virtual text configuration option
can be toggled using `vim.lsp.with` followed by
`vim.lsp.diagnostic.redraw()` to immediately redraw the diagnostics
with the updated setting.
Remove syncolor.vim in favor of defining the default highlight groups
directly in `init_highlight`. This approach provides a number of
advantages:
1. The highlights are always defined, regardless of whether or not the
syntax regex engine is enabled.
2. Redundant sourcing of syntax files is eliminated (syncolor.vim was
often sourced multiple times based on how the user's colorscheme file
was written).
3. The syntax highlighting regex engine and the highlight groups
themselves are more fully decoupled.
4. Removal of the confusing `:syntax on` / `:syntax enable` dichotomy
(they now both do the same thing).
This approach also correctly solves a number of bugs related to
highlighting (#15176, #12573, #15205).
The handlers for textDocument/references, textDocument/documentSymbol,
and workspace/symbol open their results in the quickfix list by default
and are not configurable. They are also incompatible with `vim.lsp.with`
as they do not accept a configuration parameter.
Add a `config` parameter to the handler for these three messages which
allows them to be configured with `vim.lsp.with`. Additionally, add a
new configuration option 'loclist' that, when true, causes these
handlers to open their results in the location list rather than the
quickfix list.
Some language servers *cough*rust-analyzer*cough* need an empty/custom
workspaceFolders for certain usecases. For example, rust-analyzer
needs an empty workspaceFolders table for standalone file support
(See https://github.com/rust-analyzer/rust-analyzer/pull/8955).
This can also be useful for other languages that need to commonly
open a certain directory (like flutter or lua), which would help
prevent spinning up a new language server altogether.
In case no workspaceFolders are passed, we fallback to what we had
before.
Passing `nil` is equivalent to passing 0, i.e. it simply uses the
current buffer number.
This fixes a bug when vim.lsp.diagnostic.disable() is called without
arguments.
Add two new methods to allow diagnostics to be disabled (and re-enabled)
in the current buffer. When diagnostics are disabled they are simply not
displayed to the user, but they are still sent by the server and
processed by the client.
Disabling diagnostics can be helpful in a number of scenarios. For
example, if one is working on a buffer with an overwhelming amount of
diagnostic warnings it can be helpful to simply disable diagnostics
without disabling the LSP client entirely. This also allows users more
flexibility on when and how they may want diagnostic information to be
displayed. For example, some users may not want to display diagnostic
information until after the buffer is first written.
An empty table was previously always treated as a list, which means that
while merging tables, whenever an empty table was encountered it would
always truncate any table on the left.
`vim.tbl_deep_extend("force", { b = { a = 1 } }, { b = {} })`
Before: `{ b = {} }`
After: `{ b = { a = 1 } }`
This fixes an issue (#12573) where colorscheme files are sourced twice
upon startup. This occurs when the startup script calls `:colorscheme`,
which sets the `g:colors_name` global variable. When syntax highlighting
is enabled in `syn_maybe_enable()` the `syntax.vim` script is sourced
which in turn sources `synload.vim`. This script checks to see if
`g:colors_name` is set and, if so, runs
exe "colors " . colors_name
This is done to ensure that highlight groups are defined before enabling
the syntax highlighting engine.
Instead, source syncolors.vim before the startup scripts which sets up
default highlights and only load the full syntax engine after
the startup scripts or when the user runs `:syntax on`. Add a guard
variable `did_syncolor` to prevent syncolor.vim from being sourced
twice and remove the line mentioned above from synload.vim so that
the colorscheme file is not re-sourced when the syntax engine is loaded.
the `textDocument/rangeFormatting` nad `textDocument/formatting` did not
pass bufnr to apply_text_edits, meaning edits were applied to
the user's currently active buffer. This could result in text being
applied to the wrong buffer.
Some programs behave differently when they detect that stdin is being
piped. This can be problematic when these programs are used with the job
control API where stdin is attached, but not typically used. It is
possible to run the job using a PTY which circumvents this problem, but
that includes a lot of overhead when simply closing the stdin pipe would
suffice.
To enable this behavior, add a new parameter to the jobstart options
dict called "stdin" with two valid values: "pipe" (the default)
implements the existing behavior of opening a channel for stdin and
"null" which disconnects stdin (or, if you prefer, connects it to
/dev/null). This is extensible so that other modes can be added in the
future.
ipairs terminates on the first nil index when iterating over table keys:
for i,k in ipairs( {[1] = 'test', [3] = 'test'} ) do
print(i, k)
end
prints:
1 test
Instead, use pairs which continues iterating over the entire table:
for i,k in pairs( {[1] = 'test', [3] = 'test'} ) do
print(i, k)
end
prints:
1 test
3 test
`return err_message(tostring(err))` caused errors to be printed as
`table: 0x123456789` instead of showing the error code and error
message.
This also removes some `if err` blocks that never got called because at
the end of `handlers.lua` all the handlers are wrapped with logic that
adds generic error handling.
RFC 8089, which defines the file URI scheme, also allows URIs without a
hostname, i.e. of the form file:/path/to/file. These are returned by
some language servers and accepted by other LSP implementations, such as
VSCode's, so it is reasonable for us to accept them as well.
Adds indentation that matches the number prefix to ensure diagnostic
messages spawning multiple lines align.
Before:
Diagnostics:
1. • Variable not in scope: red :: t0 -> t
• Perhaps you meant one of these:
‘rem’ (imported from Prelude), ‘read’ (imported from Prelude),
‘pred’ (imported from Prelude)
2. • Variable not in scope: repeDoubleColon :: [Char] -> t0
• Perhaps you meant ‘replaceDoubleColon’ (line 32)
After:
Diagnostics:
1. • Variable not in scope: red :: t0 -> t
• Perhaps you meant one of these:
‘rem’ (imported from Prelude), ‘read’ (imported from Prelude),
‘pred’ (imported from Prelude)
2. • Variable not in scope: repeDoubleColon :: [Char] -> t0
• Perhaps you meant ‘replaceDoubleColon’ (line 32)
Problem: JSONC files are not recognized.
Solution: Recognize .jsonc files. (Izhak Jakov, closesvim/vim#8500)
acbb4b5720
N/A patches for version.c:
vim-patch:8.2.3081: cannot catch errors in a channel command
Problem: Cannot catch errors in a channel command.
Solution: Instead of skipping the error make it silent. (closesvim/vim#8477)
11a632d60b
vim-patch:8.2.3082: a channel command "echoerr" does not show anything
Problem: A channel command "echoerr" does not show anything.
Solution: Do not use silent errors when using an "echoerr" command.
(closesvim/vim#8494)
b836f631db
vim-patch:8.2.3094: Test_popup_atcursor_pos() fails without the conceal feature
Problem: Test_popup_atcursor_pos() fails without the conceal feature.
Solution: Add a check for the conceal feature. (Dominique Pellé,
closesvim/vim#8505)
c60e959cba
vim-patch:8.2.3098: popup window test is flaky on MS-Windows with GUI
Problem: Popup window test is flaky on MS-Windows with GUI.
Solution: Skip the check in this situation.
999db2346b
Options formatted as a list of comma-separated key-value pairs may have
values that contain leading and trailing whitespace characters. For
example, the `listchars` option has a default value of
`"tab:> ,trail:-,nbsp:+"`. When converting this value to a lua table,
leading and trailing whitespace should not be trimmed.
Co-authored-by: Robert Hrusecky <robert.hrusecky@utexas.edu>
Ensure that
* Shell uses UTF8 input/output mode
* Stderr output is captured, in UTF8
* Program exit codes are correctly captured
Update functional test harness and add tests
for :make command.
Closes#13713
Block copy and paste from system-clipboard currently breaks formatting.
This fixes it.
The bug occurs because system-clipboard doesn't contain information
about what mode the copy was made.
Simple solution to this is we keep a cache of copy we last made along
with mode information. If system-clipboard returns the cache we apply
the mode information that we know about that cache.
This closes#14677, but I also am a little unsure if there are times
where this may not be correct. However, this just changes the behavior
that even if `was_set` was false, we still get for
`nvim_win_get_option`.
* Add buffer information to tabline_update
Most terminal implementations of the tabline display buffer and tab
information. Many neovim-qt users disable GuiTabline because it lacks
functionality provided in the terminal implementation.
The tabline_update event should include buffer information too, so client GUIs
can display rich useful tabs.
The `onexit` handler could set `message_callbacks` to `nil` within the
luv event loop while the mainloop runs a function that tries to access
`message_callbacks`.
This adds some checks to prevent errors in that case.
Fixes https://github.com/neovim/neovim/issues/14863
Add :eval and :checkhealth (:eval was also missing upstream).
Fix :perlfile typo, add abbreviations for :perl, :perlfile and :perldo.
Remove :scriptversion; it hasn't been ported yet (#14611).
[skip ci]
Add the buffer number to the `textDocument/formatting` request, so
that it is passed to the handler.
The built-in formatting handlers do not use the buffer number, but user
overrides should have access to it.
`lsp.diagnostic.get_all()` was returning diagnotics for `:bwipeout`-ed
buffers because the diagnostic cache is not cleared. The first argument
of on_detach callback is the string "detach", not the bufnr.
Problem: Cannot use "z=" when 'spell' is off.
Solution: Make "z=" work even when 'spell' is off. (Christian Brabandt,
Gary Johnson, closesvim/vim#6227)
152e79e94b
Problem: Spell suggestions insufficiently tested.
Solution: Add spell suggestion tests. (Dominique Pelle, closesvim/vim#5398)
e9a8d1f9ad
Requires latest en.utf-8.spl from
https://ftp.nluug.nl/pub/vim/runtime/spell/.
Include the following patch because patch v8.2.0946 was merged:
vim-patch:8.2.0948: spell test fails
Problem: Spell test fails.
Solution: Adjust expected text of the prompt.
d281b7c227
Currently, for large number of diagnostics, the delay in populating
loclist may be sufficient for a user to switch to another window,
resulting in the loclist being populated on the wrong window.
In the documentation for `vim.lsp.util.open_floating_preview`
the opts table keys were prefixed with `--` instead of `---`,
preventing capture by docgen.
This pr allows the user to specify whether `lsp.utils.open_floating_preview`
is focusable via the `opts` parameter. Defaults to true.
It can be configured by setting the focusable key inside opts parameter:
```lua
vim.lsp.util.open_floating_preview(contents, syntax, {focusable = false})
```
Problem: Cannot paste a block without adding padding.
Solution: Add "zp" and "zP" which paste without adding padding. (Christian
Brabandt, closesvim/vim#8289)
2fa9384ca1
Cherry-pick Test_normal_z_error() from patch v8.2.0369.
Install the icon of the application in the hicolor XDG icon theme;
this way it can be properly loaded by XDG menus in the currently set
XDG icon theme, without looking in the legacy pixmaps location.
handlers passed to `lsp_buf_request` weren't called if the server
responded with an error that looks like this:
"decoded", {
error = {
code = -32601,
message = "No delegateCommandHandler for foo"
},
id = 5,
jsonrpc = "2.0"
}
An example where that happens is both eclipse.jdt.ls and the
haskell-language-server when invoking a command that doesn't exist:
:lua vim.lsp.buf_request(
0,
'workspace/executeCommand',
{ command = 'foo' },
function(err, _, res)
print(vim.inspect(err), vim.inspect(res))
end
)
Problem: Problem restoring 'packpath' in session.
Solution: Let "skiprtp" also apply to 'packpath'.
d23b714d8b
Port Test_mksession_skiprtp() to lua functional test.
Problem: Problems when restoring 'runtimepath' from a session file.
Solution: Add the "skiprtp" item in 'sessionoptions'.
635bd60804
Allow "terminal" value for sessionoptions even if it's no-opt
because patch v8.0.1592 is not ported yet.
Omit vim9 test, Test_mksession_skiprtp().
fix: fancy_floating_markdown: syn region must include keepend to make sure syntax regions are applied correctly. Fixes#14594
feat: fancy_floating_markdown: handle <pre></pre> code blocks as a markdown code block with plaintext
fix: possible nil check for markdown code blocks till end of buffer
refactor: only one check is needed to see if stripped[h.finish +1] is valid
fix(lsp): dont't set doc ownsyntax, since it breaks contained syntaxes. Set regions for the markdown blocks intsead
fix: apply markdown formatting for code blocks without a language
fix: use markdownCodeBlock when no language was set in a code block