Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: vim/vim#13367closes: vim/vim#133754bca4897a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: vim/vim#13402
related: vim/vim#12971closes: vim/vim#13408daef8c7437
Co-authored-by: Christian Brabandt <cb@256bit.org>
The prefix option of the diagnostic virtual text can be a function,
but previously it was only a function of diagnostic.
This function should also have additional parameters index and total,
more consistently and similarily as in the prefix function for
`vim.diagnostic.open_float()`.
These additional parameters will be useful when there are too many
number of diagnostics in a single line.
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm9198c1f2b1
N/A patch:
vim-patch:9.0.2073: typo in quickfix.c comments
Co-authored-by: Christian Brabandt <cb@256bit.org>
Fixes a regression from 5e5f5174e3
Until that commit we had a logic like this:
`local prefix = startbyte and line:sub(startbyte + 1) or line_to_cursor:sub(word_boundary)`
The commit changed the logic and no longer cut off the line at the cursor, resulting in a prefix that included trailing characters
Problem:
`win_get_bordertext_col` returns column < 1 for right or center
aligned text, if its length is more than window width.
Solution:
Return max(resulting_column, 1)
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: vim/vim#13419b731800522
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: vim/vim#133997d254dbc2d
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: vim/vim#1340584394f2be4
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
Fixes https://github.com/neovim/neovim/issues/25177
I initially wanted to split this into a refactor commit to make it more
testable, but it appears that already accidentally fixed the issue by
normalizing lnum/col to 0-indexing
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: vim/vim#13396a36acb7ac4
`SREQ_*` values are now actual typedef'd enums. `get_option_value_strict()` has also been refactored and split into two functions, `get_option_attrs()` for getting the option attributes, and `get_option_value_strict()` for getting the actual value. Moreover, it now returns an `OptVal`. Other miscellaneous refactors have also been made.
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: vim/vim#1338047416d1a74
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: vim/vim#13389a8c664a042
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: vim/vim#13376closes: vim/vim#13377c59c1e0d88
The change in check_due_timer() is N/A as Nvim calls timer callbacks on
the main loop.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: vim/vim#13371a0e1f06f04
Problem: Wrong color for half of wide character next to pum scrollbar.
Solution: Redraw the screen cell with the right color. (closesvim/vim#9874)
35d8c2010e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: completion shows current word after completion restart
Solution: remove the word being completed after completion restart
The word being completed is shown in a completion list after completion
restart, because it isn't removed from the current buffer before
searching for matches.
Also adjust `Test_complete_add_onechar` to match the new behavior.
closes: vim/vim#133492e3cd52fa0
Co-authored-by: nwounkn <nwounkn@gmail.com>
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: vim/vim#13320bd734c3bea
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem:
The next command after `silent !{cmd}` or `silent lua print('str')`
prints an empty line before printing a message, because these commands
set `msg_didout = true` despite not printing any messages.
Solution:
Set `msg_didout = true` only if `msg_silent == 0`
