runtime(less): update "Last Change:" header
Commit 103f1dfb7df350650a5d7caadb0364bd79e9d25b forgot to update the
"Last Change:" header. So update it now.
79230f027a
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(less): reset readonly setting when disabling less mode
While at it, also do the unmap only if a specific key has been mapped.
There are some keys that are only selectively mapped and it would cause
an error if we are trying to unmap such a key (e.g. z when your
foldmethod is not manual).
fixes: vim/vim#14040103f1dfb7d
Co-authored-by: Christian Brabandt <cb@256bit.org>
https://github.com/neovim/neovim/pull/27428 changed the semantics of
callbacks passed to nvim_create_autocmd such that any truthy value will
delete the autocommand (rather than just the literal boolean value
`true`). Update the documentation accordingly and add an entry to
`news.txt`.
The behavior is now consistent between nvim_create_autocmd and
nvim_buf_attach.
The '*.bats' file type is for Bash Automated Testing System (BATS)
scripts. BATS scripts are Bash with a special '@test' extension but they
otherwise work with Vim's bash filetype.
See https://github.com/bats-core/bats-corecloses: vim/vim#14039d00fb4b3a2
Co-authored-by: Brandon Maier <brandon.maier@collins.com>
The 'Config.in' file type is for Buildroot configuration files.
Buildroot Config.in files use the same Kconfig backend as the Linux
kernel's Kconfig files.
Buildroot also has other filename variants that follow "Config.in.*",
they are used to distinguish multiple Config.in files in the same
directory.
See https://buildroot.org/downloads/manual/manual.html#_literal_config_in_literal_filecloses: vim/vim#140385f20f050ef
Co-authored-by: Brandon Maier <brandon.maier@collins.com>
Problem: filetype: no support for dtso files
Solution: Add detection for *.dtso files as dts file type
(Markus Schneider-Pargmann)
*.dtso files are devicetree overlay files which have the same syntax as dts or dtsi files.
closes: vim/vim#14026b1700fb33f
Co-authored-by: Markus Schneider-Pargmann <msp@baylibre.com>
Problem: Visual highlight hard to read with 'termguicolors'
(Maxim Kim)
Solution: Set Visual GUI foreground to black (with background=light)
and lightgrey (with background=dark)
(Maxim Kim)
fixes: vim/vim#14024closes: vim/vim#1402534e4a05d02
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: Visual highlighting can still be improved
Solution: Update Visual highlighting for 8 color terminals,
use uniform grey highlighting for dark and light bg
(Maxim Kim)
Update terminal Visual
1. Use `ctermbg=Grey ctermfg=Black` for both dark and light
This uniforms Visual highlighting between default dark and light colors
And should work for vim usually detecting light background for terminals
with black/dark background colors.
Previously used `ctermfg=White` leaks `cterm=bold` if available colors
are less than 16.
2. Use `term=reverse cterm=reverse ctermbg=NONE ctermfg=NONE`
for terminals reporting less than 8 colors available
If the terminal has less than 8 colors, grey just doesn't work right
closes: vim/vim#1394059bafc8171
Co-authored-by: Maxim Kim <habamax@gmail.com>
Previously the LSP-Client object contained some fields that are also
in the client config, but for a lot of other fields, the config was used
directly making the two objects vaguely entangled with either not having
a clear role.
Now the config object is treated purely as config (read-only) from the
client, and any fields the client needs from the config are now copied
in as additional fields.
This means:
- the config object is no longet normalised and is left as the user
provided it.
- the client only reads the config on creation of the client and all
other implementations now read the clients version of the fields.
In addition, internal support for multiple callbacks has been added to
the client so the client tracking logic (done in lua.lsp) can be done
more robustly instead of wrapping the user callbacks which may error.
and for return value of nlua_exec/nlua_call_ref, as this uses
the same family of functions.
NB: the handling of luaref:s is a bit of a mess.
add api_luarefs_free_XX functions as a stop-gap as refactoring
luarefs is a can of worms for another PR:s.
as a minor feature/bug-fix, nvim_buf_call and nvim_win_call now preserves
arbitrary return values.
Problem: Loading `vim.fs` via the `vim.loader` Lua package loader will
result in a stack overflow due to a cyclic dependency. This may happen
when the `vim.fs` module isn't byte-compiled, i.e. when `--luamod-dev`
is used (#27413).
Solution: `vim.loader` depends on `vim.fs`. Therefore `vim.fs` should
be loaded in advance.
runtime(vim): Update syntax file (vim/vim#14009)
- allow comments after :highight commands
- match the bang in a :highlight[!] command
- highlight the bang in :map[!], :menu[!] and :unlet[!] with vimOper
like all other commands
b614b284ee
Co-authored-by: dkearns <dougkearns@gmail.com>
runtime(gpg): Mark dangerous use-embedded-filename with WarningMsg
The syntax highlighter is likely to encourage people to use the listed
commands.
But `use-embedded-filename` is a dangerous option that can cause GnuPG
to write arbitrary data to arbitrary files whenever GnuPG encounters
malicious data.
GnuPG upstream explicitly warns against using this option:
https://dev.gnupg.org/T4500https://dev.gnupg.org/T6972
However, since this is a valid option, we cannot just drop it from the
syntax script. Instead, let's mark it with the WarningMsg highlighting
to make it obvious, that this option is different (and should not be
used for security reasons).
closes: vim/vim#139616d91227267
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
The dispatchers used by the RPC client should be defined in the client,
so they have been moved there. Due to this, it also made sense to move
all code related to client configuration and the creation of the RPC
client there too.
Now vim.lsp.start_client is significantly simplified and now mostly
contains logic for tracking open clients.
- Renamed client.new -> client.start
When "q" is set in 'shortmess' it now fully hides the "recording @a" message
when you are recording a macro instead of just shortening to "recording". This
removes duplication when using reg_recording() in the statusline.
Related #19193
Problem:
Since 2448816956, the --startuptime report shows
two blocks of data. The TUI process and its embedded nvim process write to the
file concurrently, which may interleave the two startup sequences into the same
timeline.
Solution:
Report each process as a separate section in the same file.
1. Each process buffers the full report.
2. After startup is finished, the buffer is flushed (appended) to the file.
Fix#23036
Sample report:
--- Startup times for process: Primary/TUI ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.428 000.422: event init
000.728 000.301: early init
...
005.880 000.713: init highlight
005.882 000.002: --- NVIM STARTED ---
--- Startup times for process: Embedded ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.409 000.403: event init
000.557 000.148: early init
000.633 000.077: locale set
...
014.383 000.430: first screen update
014.387 000.003: --- NVIM STARTED ---
Problem:
If a rename results in a path that has missing parent directory(s), it
will fail.
Solution:
Do a recursive mkdir before attempting the rename.
Problem:
`vim.lsp.diagnostic.on_diagnostic` accepts an undocumented severity_limit
option which is widely used.
Solution:
Deprecate it in favour of `{min = severity}` used in `vim.diagnostic`.
Since this is undocumented, the schedule for removal is accelerated to
0.11.
Document that the `start` and `stop` parameters in
`Query:iter_captures()` and `Query:iter_matches()` are optional.
The tree-sitter lib has been bumped up to 0.20.9, so we also no longer
need "Requires treesitter >= 0.20.9".
- `TSQuery`: userdata object for parsed query.
- `vim.treesitter.Query`: renamed from `Query`.
- Add a new field `lang`.
- `TSQueryInfo`:
- Move to `vim/treesitter/_meta.lua`, because C code owns it.
- Correct typing for `patterns`, should be a map from `integer`
(pattern_id) to `(integer|string)[][]` (list of predicates or
directives).
- `vim.treesitter.QueryInfo` is added.
- This currently has the same structure as `TSQueryInfo` (exported
from C code).
- Document the fields (see `TSQuery:inspect`).
- Add typing for `vim._ts_parse_query()`.
Getting current channel info was kind of annoying via RPC. Two
functions had to be called:
1. `nvim_get_api_info` which returns `[channel_id, meta_data]`.
- This results in `channel_id = api.nvim_get_api_info()[0]`.
- Here the meta_data is sent but never used.
2. Finally call `nvim_get_chan_info(channel_id)`.
This commit reduces the need for `nvim_get_api_info` as passing 0
returns current channel info.
runtime(doc): Clarify list-concatenation a bit more
Make doc list-concatenation more clear as for += and extend().
1. describe `+=` for list-concatenation more accurately
2. add `extend()` example for list-concatenation
3. Fix CI errors for missing helptags reference |+=|
closes: vim/vim#13983c9c2e2d2ff
Co-authored-by: qeatzy <qeatzy@users.noreply.github.com>
Problem: unexpected error for modifying final list using += operator
(Ernie Rael)
Solution: Allow List value modification of a final variable using +=
operator
(Yegappan Lakshmanan)
fixes: vim/vim#13745fixes: vim/vim#13959closes: vim/vim#139621af35631f8
Only port eval.txt changes.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem:
The LSP client code is implemented as a complicated closure-class
(class defined in a single function).
Solution:
Move LSP client code to a more conventional Lua class and move to a
separate file.
