Using :CheckHealth invokes an error, and many of the features from :checkhealth
doesn't even work such as calling only a specific check. Users should use
:checkhealth instead.
The builtin cat was removed in 4bc9229ecb
as it is not used during runtime but only for tests. However, it is a
very small and useful utility program that we need for a lot of our
tests, so there's no harm in bundling it, and it helps us avoid
complicating our build system by having two versions of neovim (neovim
for users and neovim for testing).
Also skip tests if "grep" or "sleep" isn't available.
Problem:
If vim_tempdir mysteriously goes missing (typically by "antivirus" on
Windows), any plugins using tempname() will be broken for the rest of
the session. #1432#9833https://groups.google.com/g/vim_use/c/ef55jNm5czI
Steps:
mkdir foo
TMPDIR=./foo nvim
:echo tempname()
!rm -r foo
:echo tempname()
tempname() still uses the foo path even though it was deleted.
Solution:
- Don't assume that vim_tempdir exists.
- If it goes missing once, retry vim_mktempdir and log (silently) an error.
- If it goes missing again, retry vim_mktempdir and show an error.
Rejected in Vim for performance reasons:
https://groups.google.com/g/vim_use/c/qgRob9SWDv8/m/FAOFVVcDTv0Jhttps://groups.google.com/g/vim_dev/c/cogp-Vye4oo/m/d_SVFXBbnnoJ
But, logging shows that `vim_gettempdir` is not called frequently.
Fixes#1432Fixes#9833Fixes#11250
Related: stdpath("run") f50135a32e
Previously, if the autocommands are not triggered, the tests may still
pass because no assertion is done. Add an assertion so that the tests
will fail if the autocommands aren't triggered.
Since before_each() doesn't call clear() in these tests, after_each()
may call expect_exit() without calling clear() if a test is skipped,
causing frequent test failures on Cirrus CI. Close the session instead.
Problem:
When "-l" is followed by "--", we stop sending args to the Lua script
and treat "--" in the usual way. This was for flexibility but didn't
have a strong use-case, and has these problems:
- prevents Lua "-l" scripts from handling "--" in their own way.
- complicates the startup logic (must call nlua_init before command_line_scan)
Solution:
Don't treat "--" specially if it follows "-l".
Problem:
Nvim has Lua but the "nvim" CLI can't easily be used to execute Lua
scripts, especially scripts that take arguments or produce output.
Solution:
- support "nvim -l [args...]" for running scripts. closes#15749
- exit without +q
- remove lua2dox_filter
- remove Doxyfile. This wasn't used anyway, because the doxygen config
is inlined in gen_vimdoc.py (`Doxyfile` variable).
- use "nvim -l" in docs-gen CI job
Examples:
$ nvim -l scripts/lua2dox.lua --help
Lua2DoX (0.2 20130128)
...
$ echo "print(vim.inspect(_G.arg))" | nvim -l - --arg1 --arg2
$ echo 'print(vim.inspect(vim.api.nvim_buf_get_text(1,0,0,-1,-1,{})))' | nvim +"put ='text'" -l -
TODO?
-e executes Lua code
-l loads a module
-i enters REPL _after running the other arguments_.
Extend the capabilities of is_os to detect more platforms such as
freebsd and openbsd. Also remove `iswin()` helper function as it can be
replaced by `is_os("win")`.
This is essentially a convenience wrapper around the `pending()`
function, similar to `skip_fragile()` but more general-purpose.
Also remove `pending_win32` function as it can be replaced by
`skip(iswin())`.
Fix backups failing for symlink files
Set backup to NULL prior to continuing & Clear backup prior to NULL set
to avoid leaking
Fixes#11349
Remove testing hacks in scripts for windows
Skip FreeBSD
Something appears up with these types of tests for FreeBSD on
Circus, see 2d6735d8ce
The old behaviour (e.g. via `set display-=msgsep`) will not be available.
Assuming that messages always are being drawn on msg_grid
(or not drawn at all, and forwarded to `ext_messages` enabled UI)
will allows some simplifcations and enhancements moving forward.
Problem:
Cannot opt-out of "WARNING: The file has been changed since reading
it!!!", even with ":write!".
Solution:
Change ":write!" to skip the warning.
closes#7270
dispatch.sr.ht is being deprecated, meaning that using sourcehut CI
won't be possible (see https://github.com/neovim/neovim/issues/19609).
Since Github Actions doesn't provide any BSD runners an external service
is required and Cirrus CI seems like a good replacement for sourcehut.
Initially experimented with using FreeBSD and OpenBSD virtual machines
in GitHub Actions, but Cirrus has been a much better fit with better
performance, logs and overall experience.
Failing tests are automatically skipped on FreeBSD regardless if it's on
CI or not. Ideally these tests should only be skipped in CI with the
help of `isCI` helper function. Unfortunately, the tests don't recognize
the environment variable CIRRUS_CI even if it's set manually. This
workaround is good enough for the time being, but we might want to only
skip tests when using the CI (or even better, fix the failing tests).
Closes: https://github.com/neovim/neovim/issues/19609
Problem:
Since right-click can now show a popup menu, we can provide messaging to
guide users who expect 'mouse' to be disabled by default. So 'mouse' can
now be enabled by default.
Solution:
Do it.
Closes#15521
Problem:
- Since c57f6b28d7#8519, sockets are created in ~/.local/… but XDG
spec says: "XDG_RUNTIME_DIR: Must be on the local filesystem", which
implies that XDG_STATE_DIR is potentially non-local.
- Not easy to inspect Nvim-created temp files (for debugging etc).
Solution:
- Store sockets in stdpath('run') ($XDG_RUNTIME_DIR).
- Establish "/tmp/nvim.user/" as the tempdir root shared by all Nvims.
- Make ok() actually useful.
- Introduce assert_nolog().
closes#3517closes#17093
Problem:
1. CI logs have too many (40+) logs mentioning SIGHUP:
```
WRN 2022-06-18T16:05:47.075 T3568.22499.0/c deadly_signal:177: got signal 1 (SIGHUP)
WRN 2022-06-18T16:05:47.273 T3569.91095.0/c deadly_signal:177: got signal 1 (SIGHUP)
WRN 2022-06-18T16:05:47.651 T3570.59545.0/c deadly_signal:177: got signal 1 (SIGHUP)
```
2. TS parser test still sometimes fails on BSD CI.
3. remote_spec test fails too often.
Solution:
1. Log deadly signals at INFO level. It hasn't been helpful in CI, and
for local troubleshooting it's reasonable to adjust the loglevel as
needed.
2. Adjust the TS parser test again. ref #18911
3. Skip the remote_spec test. The `--remote` feature was merged before
it was fully formed and needs to be revisited.
Problem:
- Unix sockets are created in random /tmp dirs.
- /tmp is messy, unclear when OSes actually clear it.
- The generated paths are very ugly. This adds friction to reasoning
about which paths belong to which Nvim instances.
- No way to provide a human-friendly way to identify Nvim instances in
logs or server addresses.
Solution:
- Store unix sockets in stdpath('state')
- Allow --listen "name" and serverstart("name") to given a name (which
is appended to a generated path).
TODO:
- is stdpath(state) the right place?
Problem:
1. Log messages (especially in CI) are hard to correlate with tests.
2. Since b353a5c05f#11886, dumplog() prints the logs next to test
failures. This is noisy and gets in the way of the test results.
Solution:
1. Associate an incrementing id with each test and include it in log
messages.
- FUTURE: add v:name so Nvim instances can be formally "named"?
2. Mention "child" in log messages if the current Nvim is a child (based
on the presence of $NVIM).
BEFORE:
DBG … 12345 UI: event
DBG … 12345 log_server_msg:722: RPC ->ch 1: …
DBG … 12345 UI: flush
DBG … 12345 inbuf_poll:444: blocking... events_enabled=1 events_pending=0
DBG … 23454 UI: stop
INF … 23454 os_exit:594: Nvim exit: 0
AFTER:
DBG … T57 UI: event
DBG … T57 log_server_msg:722: RPC ->ch 1: …
DBG … T57 UI: flush
DBG … T57 inbuf_poll:444: blocking... events_enabled=1 events_pending=0
DBG … T57/child UI: stop
INF … T57/child os_exit:594: Nvim exit: 0
Problem:
1. The main log routine does not protect itself against recursion.
log_lock() doesn't guard against recursion, it would deadlock...
2. 22b52dd462 (#11501) regressed 6f27f5ef91 (#10172), because
set_init_1..process_spawn tries to log (see backtrace below), but the
mutex isn't initialized yet. Even if the mutex were valid, we don't
want early logging to fallback to stderr because that can break
embedders when stdio is used for RPC.
frame 1: 0x00000001001d54f4 nvim`open_log_file at log.c:205:7
frame 2: 0x00000001001d5390 nvim`logmsg(log_level=1, context="UI: ", func_name=0x0000000000000000, line_num=-1, eol=true, fmt="win_viewport") at log.c:150:20
frame : 0x000000010039aea2 nvim`ui_call_win_viewport(grid=2, win=1000, topline=0, botline=1, curline=0, curcol=0, line_count=1) at ui_events_call.generated.h:321:3
frame 4: 0x00000001003dfefc nvim`ui_ext_win_viewport(wp=0x0000000101816400) at window.c:939:5
frame 5: 0x00000001003ec5b4 nvim`win_ui_flush at window.c:7303:7
frame 6: 0x00000001003a04c0 nvim`ui_flush at ui.c:508:3
frame 7: 0x00000001002966ba nvim`do_os_system(argv=0x0000600000c0c000, input=0x0000000000000000, len=0, output=0x0000000000000000, nread=0x00007ff7bfefe830, silent=false, forward_output=false) at shell.c:894:3
frame 8: 0x0000000100295f68 nvim`os_call_shell(cmd="unset nonomatch; vimglob() { while [ $# -ge 1 ]; do echo \"$1\"; shift; done }; vimglob >/var/folders/gk/3tttv_md06987tlwpyp62jrw0000gn/T/nvimwwvwfD/0 ~foo", opts=kShellOptExpand | kShellOptSilent | kShellOptHideMess, extra_args=0x0000000000000000) at shell.c:663:18
frame 9: 0x0000000100295845 nvim`call_shell(cmd="unset nonomatch; vimglob() { while [ $# -ge 1 ]; do echo \"$1\"; shift; done }; vimglob >/var/folders/gk/3tttv_md06987tlwpyp62jrw0000gn/T/nvimwwvwfD/0 ~foo", opts=kShellOptExpand | kShellOptSilent | kShellOptHideMess, extra_shell_arg=0x0000000000000000) at shell.c:712:14
frame 10: 0x0000000100294c6f nvim`os_expand_wildcards(num_pat=1, pat=0x00007ff7bfefeb20, num_file=0x00007ff7bfefee58, file=0x00007ff7bfefee60, flags=43) at shell.c:328:7
...
frame 23: 0x000000010028ccef nvim`expand_env_esc(srcp=",~foo", dst="~foo", dstlen=4094, esc=false, one=false, prefix=0x0000000000000000) at env.c:673:17
frame 24: 0x000000010026fdd5 nvim`option_expand(opt_idx=29, val=",~foo") at option.c:1950:3
frame 25: 0x000000010026f129 nvim`set_init_1(clean_arg=false) at option.c:558:19
frame 26: 0x00000001001ea25e nvim`early_init(paramp=0x00007ff7bfeff5f0) at main.c:198:3
frame 27: 0x00000001001ea6bf nvim`main(argc=1, argv=0x00007ff7bfeff848) at main.c:255:3
Solution:
1. Check for recursion, show "internal error" message.
- FUTURE: when "remote TUI" is merged, can we remove log_lock()?
2. Skip logging if log_init wasn't called yet.
