* Revert "fix(lsp): account for changedtick version gap on modified reset (#29170)"
This reverts commit 2e6d295f79.
* Revert "refactor(lsp): replace util.buf_versions with changedtick (#28943)"
This reverts commit 5c33815448.
`lsp.util.buf_versions` was already derived from changedtick (`on_lines`
from `buf_attach` synced the version)
As far as I can tell there is no need to keep track of the state in a
separate table.
Deprecate vim.diagnostic.goto_prev() and vim.diagnostic.goto_next() in
favor of a unified vim.diagnostic.jump() interface.
We cannot name the function "goto()" because some of our tooling
(luacheck and stylua) fail to parse it, presumably because "goto" is a
keyword in newer versions of Lua.
vim.diagnostic.jump() also allows moving to a specific diagnostic and
moving by multiple diagnostics at a time (useful for creating mappings
that use v:count).
Problem:
`vim.rpcnotify(0)` and `rpcnotify(0)` are documented as follows:
If {channel} is 0, the event is broadcast to all channels.
But that's not actually true. Channels must call `nvim_subscribe` to
receive "broadcast" events, so it's actually "multicast".
- Assuming there is a use-case for "broadcast", the current model adds
an extra step for broadcasting: all channels need to "subscribe".
- The presence of `nvim_subscribe` is a source of confusion for users,
because its name implies something more generally useful than what it
does.
Presumably the use-case of `nvim_subscribe` is to avoid "noise" on RPC
channels not expected a broadcast notification, and potentially an error
if the channel client reports an unknown event.
Solution:
- Deprecate `nvim_subscribe`/`nvim_unsubscribe`.
- If applications want to multicast, they can keep their own multicast
list. Or they can use `nvim_list_chans()` and `nvim_get_chan_info()`
to enumerate and filter the clients they want to target.
- Always send "broadcast" events to ALL channels. Don't require channels
to "subscribe" to receive broadcasts. This matches the documented
behavior of `rpcnotify()`.
TODO:
FUNC_API_REMOTE_ONLY APIs such as `nvim_ui_*` cannot (yet) be used in
`nvim_exec_lua`. We can change FUNC_API_REMOTE_ONLY to allow
Vimscript/Lua to pass an explicit `channel_id`. #28437
Problem:
`vim.diagnostic.is_disabled` and `vim.diagnostic.disable` are unnecessary
and inconsistent with the "toggle" pattern (established starting with
`vim.lsp.inlay_hint`, see https://github.com/neovim/neovim/pull/25512#pullrequestreview-1676750276
As a reminder, the rationale is:
- we always need `enable()`
- we always end up needing `is_enabled()`
- "toggle" can be achieved via `enable(not is_enabled())`
- therefore,
- `toggle()` and `disable()` are redundant
- `is_disabled()` is a needless inconsistency
Solution:
- Introduce `vim.diagnostic.is_enabled`, and `vim.diagnostic.enable(…, enable:boolean)`
- Note: Future improvement would be to add an `enable()` overload `enable(enable:boolean, opts: table)`.
- Deprecate `vim.diagnostic.is_disabled`, `vim.diagnostic.disable`
- Added `@inlinedoc` so single use Lua types can be inlined into the
functions docs. E.g.
```lua
--- @class myopts
--- @inlinedoc
---
--- Documentation for some field
--- @field somefield integer
--- @param opts myOpts
function foo(opts)
end
```
Will be rendered as
```
foo(opts)
Parameters:
- {opts} (table) Object with the fields:
- somefield (integer) Documentation
for some field
```
- Marked many classes with with `@nodoc` or `(private)`.
We can eventually introduce these when we want to.
This function is used only in the `workspace/configuration` handler,
and does not warrant a public API because of its confusing return types.
The only caller `vim.lsp.handlers["workspace.configuration"]` is also
refactored to use `vim.tbl_get()` instead.
feat(diagnostic): add `vim.diagnostic.count()`
Problem: Getting diagnostic count based on the output of
`vim.diagnostic.get()` might become costly as number of diagnostic
entries grows. This is because it returns a copy of diagnostic cache
entries (so as to not allow users to change them in place).
Getting information about diagnostic count is frequently used in
statusline, so it is important to be as fast as reasonbly possible.
Solution: Add `vim.diagnostic.count()` which computes severity
counts without making copies.
Diagnostic signs should now be configured with vim.diagnostic.config(),
but "legacy" sign definitions should go through the standard deprecation
process to minimize the impact from breaking changes.
The name for_each_child is misleading and caused bugs.
After #25111, #25115, there are no more usages of `for_each_child` in Nvim.
In the future if we want to restore this functionality we can consider a
generalized vim.traverse(node, key, visitor) function.
There is no need for two ways to access all clients of a buffer.
This doesn't add a `vim.deprecate` call yet, as the function is probably
used a lot, but removes it from the documentation and annotates it with
`@deprecated`
Co-authored by: zeertzjq <zeertzjq@outlook.com>
Co-authored by: Steven Todd McIntyre II <114119064+stmii@users.noreply.github.com>
Co-authored by: nobe4 <nobe4@users.noreply.github.com>
- docs: mention --luadev-mod to run with lua runtime files
When changing a lua file in the ./runtime folder, a new contributor
might expect changes to be applied to the built Neovim binary.
`client.messages` could grow unbounded because the default handler only
added new messages, never removing them.
A user either had to consume the messages by calling
`vim.lsp.util.get_progress_messages` or by manually removing them from
`client.messages.progress`. If they didn't do that, using LSP
effectively leaked memory.
To fix this, this deprecates the `messages` property and instead adds a
`progress` ring buffer that only keeps at most 50 messages. In addition
it deprecates `vim.lsp.util.get_progress_messages` in favour of a new
`vim.lsp.status()` and also promotes the `LspProgressUpdate` user
autocmd to a regular autocmd to allow users to pattern match on the
progress kind.
Also closes https://github.com/neovim/neovim/pull/20327
fix(api): use local LastSet structure in nvim_get_option_info
* nvim_get_option_info is deprecated.
It is always using the global LastSet information as reported in #15232.
* nvim_get_option_info2 is added.
The new function additionally accepts an 'opts' table {scope, buf, win}
allowing to specify the option scope and query local options from another
buffer or window.
Problem: no way of getting all highlight group definitions in a namespace.
Solution: add `nvim_get_hl()`, deprecate `nvim_get_hl_by_name()` and `nvim_get_hl_by_id()`.
Problem:
vim.deprecate() shows ":help deprecated" for third-party plugins. ":help
deprecated" only describes deprecations in Nvim, and is unrelated to any
3rd party deprecations.
Solution:
If `plugin` is specified, don't show ":help deprecated".
fix#22235
we cannot remove 'paste'. It is very common in plugins and configs.
'pastetoggle' can and should be removed though, it's a total waste of everyone's time because it generates bug reports and doesn't work well, and is useless because bracketed-paste works better.
Problem:
The function name `vim.pretty_print`:
1. is verbose, which partially defeats its purpose as sugar
2. does not draw from existing precedent or any sort of convention
(except external projects like penlight or python?), which reduces
discoverability, and degrades signaling about best practices.
Solution:
- Rename to `vim.print`.
- Change the behavior so that
1. strings are printed without quotes
2. each arg is printed on its own line
3. tables are indented with 2 instead of 4 spaces
- Example:
:lua ='a', 'b', 42, {a=3}
a
b
42
{
a = 3
}
Comparison of alternatives:
- `vim.print`:
- pro: consistent with Lua's `print()`
- pro: aligns with potential `nvim_print` API function which will
replace nvim_echo, nvim_notify, etc.
- con: behaves differently than Lua's `print()`, slightly misleading?
- `vim.echo`:
- pro: `:echo` has similar "pretty print" behavior.
- con: inconsistent with Lua idioms.
- `vim.p`:
- pro: very short, fits with `vim.o`, etc.
- con: not as discoverable as "echo"
- con: less opportunity for `local p = vim.p` because of potential shadowing.
Problem:
Help tags like vim.treesitter.language.add() are confusing because
`vim.treesitter.language` is (thankfully) not a user-facing module.
Solution:
Ignore the "fstem" when generating "treesitter" tags.
This function replaces both vim.treesitter.get_node_at_pos() and
vim.treesitter.get_node_at_cursor(). These two functions are similar
enough that they don't need separate interfaces. Even worse,
get_node_at_pos() returns a TSNode while get_node_at_cursor() returns a
string, so the two functions behave slightly differently.
vim.treesitter.get_node() combines these two into a more streamlined
interface. With no arguments, it returns the node under the cursor in
the current buffer. Optionally, it can accept a buffer number or a
position to get the node at a given position in a given buffer.
