This is the command invoked repeatedly to make the changes:
:%s/^\(.*\)|\%(\*\(\d\+\)\)\?$\n\1|\%(\*\(\d\+\)\)\?$/\=submatch(1)..'|*'..(max([str2nr(submatch(2)),1])+max([str2nr(submatch(3)),1]))/g
Allow a "*count" suffix in a screen line to repeat the screen line for
"count" times.
The change is made to Screen:expect() and Screen:get_snapshot() instead
of Screen:render() so that screen expectations generated using code can
still work and test failures can still be readable.
A snapshot is now also printed on failure so that there is no need to
run the test again with Screen:snapshot_util().
Rather than writing the synchronized update begin and end sequences into
the TUI's internal buffer (where it is later flushed to the TTY), write
these sequences directly to the TTY before and after the TUI's internal
buffer is itself flushed to the TTY.
This guarantees that a synchronized update is always used when we are
actually sending data to the TTY. This means we do not need to keep
track of the TUI's "dirty" state (any sequences which affect the TUI
state will be written in the TUI's internal buffer, which is now
guaranteed to only ever be written when a synchronized update is
active).
When we convert a Lua table to an Object, we consider the table a
"dictionary" if it contains only string keys, and an array if it
contains all numeric indices with no gaps. While rare, Lua tables can
have both strictly numeric indices and gaps (e.g. { [2] = 2 }). These
currently cannot be serialized because it is not considered an array.
However, we know the maximum index of the table and as long as all of
the keys in the table are numeric, it is still possible to serialize
this table as an array. The missing indices will have nil values.
Problem: The entire marktree needs to be traversed each time a sign is
removed from the sentinel line.
Solution: Remove sentinel line and instead keep track of the number of
lines that hold up the 'signcolumn' in "max_count". Adjust this
number for added/removed signs, and set it to 0 when the
maximum number of signs on a line changes. Only when
"max_count" is decremented to 0 due to sign removal do we need
to check the entire buffer.
Also replace "invalid_top" and "invalid_bot" with a map of
invalid ranges, further reducing the number of lines to be
checked.
Also improve tree traversal when counting the number of signs.
Instead of looping over the to be checked range and counting
the overlap for each row, keep track of the overlap in an
array and add this to the count.
Problem:
Since e057b38e70#20757 we support empty key in JSON encode/decode,
but we don't allow it in RPC object => Vim dict conversion. But empty
string is a valid key in Vim dicts and the msgpack spec.
Empty string key was disallowed in 7c01d5ff92 (2014) but that
commit/PR doesn't explicitly discuss it, so presumably it was a "seems
reasonable" decision (or Vimscript didn't allow empty keys until later).
Solution:
Remove the check in `object_to_vim()`. Note that
`tv_dict_item_alloc_len` will invoke `memcpy(…, 0)` but that's allowed
by the C spec: https://stackoverflow.com/a/3751937/152142
Currently, the value of $COLORTERM in :terminal in tests depends on
outer environment because of 'notermguicolors'.
If $COLORTERM is not set in :terminal, an inner Nvim instance will try
to detect 'termguicolors' support, which may interfere with tests.
So set 'termguicolors' in outer Nvim instance unless $COLORTERM needs to
be overridden, and unset it in inner Nvim instance when running TUI.
Set 'notermguicolors' in tests which spawn a child Nvim process to force
existing tests to use 16 colors. Also refactor the child process
invocation to make things a little bit less messy.
If the color scheme is changed in a startup script, nvim used to send
multiple default_colors_set events, one for the default color scheme
and one for the user's chosen color scheme. This would cause flicker in
some UI:s. Throttle this event until we actually start drawing on the
screen.
fixes#26372
Followup to 27501d3b6a.
Problem:
CI sometimes fails. Something is triggering an extra fsync().
FAILED test/functional/core/fileio_spec.lua @ 52: fileio fsync() with 'nofsync' #8304
test/functional/core/fileio_spec.lua💯 Expected objects to be the same.
Passed in:
(number) 5
Expected:
(number) 4
Solution:
Relax the assertion.
Problem:
Empty string is a valid JSON key, but json_decode() treats an object
with empty key as ":help msgpack-special-dict". #20757
:echo json_decode('{"": "1"}')
{'_TYPE': [], '_VAL': [['', '1']]}
Note: vim returns `{'': '1'}`.
Solution:
Allow empty string as an object key.
Note that we still (currently) disallow empty keys in object_to_vim() (since 7c01d5ff92):
f64e4b43e1/src/nvim/api/private/converter.c (L333-L334)Fix#20757
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
The test for 'nofsync' swapfile preservation on a deadly signal, does
not actually assert anything.
followup to 1fd29a2884
Solution:
Check that swapfile contents are present after getting SIGTERM.
TODO: this doesn't really verify that 'fsync' was called; it still
passes with this patch:
diff --git a/src/nvim/main.c b/src/nvim/main.c
index 216e39f3e81c..7a635520401d 100644
--- a/src/nvim/main.c
+++ b/src/nvim/main.c
@@ -838,7 +838,7 @@ void preserve_exit(const char *errmsg)
if (errmsg != NULL) {
os_errmsg("Vim: preserving files...\r\n");
}
- ml_sync_all(false, false, true); // preserve all swap files
+ ml_sync_all(false, false, false); // preserve all swap files
break;
}
}
However it correctly fails with this patch, at least:
diff --git a/src/nvim/main.c b/src/nvim/main.c
index 216e39f3e81c..f2306c310ddc 100644
--- a/src/nvim/main.c
+++ b/src/nvim/main.c
@@ -838,7 +838,6 @@ void preserve_exit(const char *errmsg)
if (errmsg != NULL) {
os_errmsg("Vim: preserving files...\r\n");
}
- ml_sync_all(false, false, true); // preserve all swap files
break;
}
}
Problem: 'breakindent' is not drawn after diff filler lines.
Solution: Correct check for whether 'breakindent' should be drawn.
closes: vim/vim#13624588f20dece
Cherry-pick Test_diff_with_syntax() change from patch 9.0.1257.
Problem:
CI sometimes fails. Something is triggering an extra fsync().
FAILED test/functional/core/fileio_spec.lua @ 52: fileio fsync() codepaths #8304
test/functional/core/fileio_spec.lua:87: Expected objects to be the same.
Passed in:
(number) 3
Expected:
(number) 2
stack traceback:
test/functional/core/fileio_spec.lua:87: in function <test/functional/core/fileio_spec.lua:52>
Solution:
Relax the assertion to `fsync >= 2` instead of exactly 2.
(Note this is not a behavior change: the next assertion has always
checked `fsync == 4`, it's just that the intermediate 3rd fsync was
never explicitly asserted.)
Problem:
With vim.treesitter.foldexpr, `o`-ing two lines above a folded region
opens the fold. This does not happen with legacy foldexprs. For example,
make a markdown file with the following text (without indentation),
enable treesitter fold, and follow the instruction in the text.
put cursor on this line and type zoo<Esc>
initially folded, revealed by zo
# then this fold will be opened
initially folded, revealed by o<Esc>
Analysis:
* `o` updates folds first (done in `changed_lines`), evaluating
foldexpr, and then invokes `on_bytes` (done in `extmark_splice`).
* Treesitter fold allocates the foldinfo for added lines (`add_range`)
on `on_bytes`.
* Therefore, when treesitter foldexpr is invoked while running `o`, it
sees outdated foldinfo.
Solution:
`extmark_splice`, and then `changed_lines`. This seems to be the
standard order in other places, e.g., `nvim_buf_set_lines`.
PROBLEM: `vim.treesitter.get_node()` does not recognize the `lang` in
the option table. This option was used in somewhere else, for instance,
`vim.treesitter.dev` (for `inspect_tree`) but was never implemented.
SOLUTION: Make `get_node()` correctly use `opts.lang` when getting a
treesitter parser.
Problem: Wrong scrolling in Insert mode with 'smoothscroll' at the
bottom of the window.
Solution: Don't use set_topline() when 'smoothscroll' is set.
fixes: vim/vim#13612closes: vim/vim#136135b4d1fcbf0
Problem: Default color scheme is suboptimal.
Solution: Start using new color scheme. Introduce new `vim` color scheme
for opt-in backward compatibility.
------
Main design ideas
- Be "Neovim branded".
- Be minimal for 256 colors with a bit more shades for true colors.
- Be accessible through high enough contrast ratios.
- Be suitable for dark and light backgrounds via exchange of dark and
light palettes.
------
Palettes
- Have dark and light variants. Implemented through exporeted
`NvimDark*` and `NvimLight*` hex colors.
- Palettes have 4 shades of grey for UI elements and 6 colors (red,
yellow, green, cyan, blue, magenta).
- Actual values are computed procedurally in Oklch color space based on
a handful of hyperparameters.
- Each color has a 256 colors variant with perceptually closest color.
------
Highlight groups
Use:
- Grey shades for general UI according to their design.
- Bold text for keywords (`Statement` highlight group). This is an
important choice to increase accessibility for people with color
deficiencies, as it doesn't rely on actual color.
- Green for strings, `DiffAdd` (as background), `DiagnosticOk`, and some
minor text UI elements.
- Cyan as main syntax color, i.e. for function usage (`Function`
highlight group), `DiffText`, `DiagnosticInfo`, and some minor text UI
elements.
- Red to generally mean high user attention, i.e. errors; in particular
for `ErrorMsg`, `DiffDelete`, `DiagnosticError`.
- Yellow very sparingly only with true colors to mean mild user
attention, i.e. warnings. That is, `DiagnosticWarn` and `WarningMsg`.
- Blue very sparingly only with true colors as `DiagnosticHint` and some
additional important syntax group (like `Identifier`).
- Magenta very carefully (if at all).
------
Notes
- To make tests work without relatively larege updates, each one is
prepended with an equivalent of the call `:colorscheme vim`.
Plus some tests which spawn new Neovim instances also now use 'vim'
color scheme.
In some cases tests are updated to fit new default color scheme.
Problem: [security]: stack-buffer-overflow in option callback functions
Solution: pass size of errbuf down the call stack, use snprintf()
instead of sprintf()
We pass the error buffer down to the option callback functions, but in
some parts of the code, we simply use sprintf(buf) to write into the error
buffer, which can overflow.
So let's pass down the length of the error buffer and use sprintf(buf, size)
instead.
Reported by @henices, thanks!
b39b240c38
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in win-enter
Solution: validate window pointer before calling win_enter()
win_goto() may stop visual mode, if it is active. However, this may in
turn trigger the ModeChanged autocommand, which could potentially free
the wp pointer which was valid before now became stale and points to now
freed memory.
So before calling win_enter(), let's verify one more time, that the
wp pointer still points to a valid window structure.
Reported by @henices, thanks!
eec0c2b3a4
Co-authored-by: Christian Brabandt <cb@256bit.org>
This reverts commit fe30d8ccef.
The original commit intends to prevent heap-use-after-free with EXITFREE
caused by changedtick_di, which is no longer a problem.
Freeing buffers after freeing variables will cause heap-use-after-free
with EXITFREE when a partial is used as prompt callback.
Some escape sequences (in particular, OSC 52 paste responses) can be
very large, even unbounded in length. These can easily overflow
termkey's internal buffer. In order to process these long sequences,
dynamically grow termkey's internal buffer.
Problem: ml_get error when scrolling after delete
Solution: mark topline to be validated in main_loop
if it is larger than current buffers line
count
reset_lnums() is called after e.g. TextChanged autocommands and it may
accidentally cause curwin->w_topline to become invalid, e.g. if the
autocommand has deleted some lines.
So verify that curwin->w_topline points to a valid line and if not, mark
the window to have w_topline recalculated in main_loop() in
update_topline() after reset_lnums() returns.
fixes: vim/vim#13568fixes: vim/vim#13578c4ffeddfe5
The error doesn't happen in Nvim because Nvim triggers TextChanged after
calling update_topline().
Co-authored-by: Christian Brabandt <cb@256bit.org>
