Problem: getregionpos() can't properly indicate positions beyond eol.
Solution: Add an "eol" flag that enables handling positions beyond end
of line like getpos() does (zeertzjq).
Also fix the problem that a position still has the coladd beyond the end
of the line when its column has been clamped. In the last test case
with TABs at the end of the line the old behavior is obviously wrong.
I decided to gate this behind a flag because returning positions that
don't correspond to actual characters in the line may lead to mistakes
for callers that want to calculate the length of the selected text, so
the behavior is only enabled if the caller wants it.
closes: vim/vim#148382b09de9104
Problem: Wrong Ex command executed when :g uses '?' as delimiter and
pattern contains escaped '?'.
Solution: Don't use "*newp" when it's not allocated (zeertzjq).
closes: vim/vim#148373074137542
Problem: statusline for non-active window can be hard to distinguish
from normal text with 'notermguicolors'. It was set to use only bold
text to find a balance between being not too similar to active
statusline and normal text, and be supported in enough terminal
emulators (if it does not support 'termguicolors' there is higher
chance that it also does not support underline).
Solution: reconsider balance by placing more emphasis on making
non-active statusline more distinguishable.
This also results into tabline being shown with underline which
aligns with "make more distinguishable" shift.
Problem: Wrong yanking with exclusive selection and virtualedit=all,
and integer overflow when using getregion() on it.
Solution: Set coladd when decreasing column and 'virtualedit' is active.
Add more tests for getregion() with 'virtualedit' (zeertzjq).
closes: vim/vim#14830701ad50a9e
Problem: The set_ref_in_item() function is too long.
Solution: Use a separate function for more complicated types. (Yegappan
Lakshmanan, closesvim/vim#11802)
ea125393af
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: closure cannot store value in outer context.
Solution: Make storing value in outer context work. Make :disassemble
accept a function reference.
b68b346e6d
Funcstack is Vim9script-only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: getregionpos() doesn't handle one char selection.
Solution: Handle startspaces differently when is_oneChar is set.
Also add a test for an exclusive charwise selection with
multibyte chars (zeertzjq)
closes: vim/vim#1482552a6f34887
Problem: Tag guessing leaves wrong search history with very short names
(after 9.1.0426).
Solution: Use the correct variable for pattern length (zeertzjq).
closes: vim/vim#1481742cd192daa
Cherry-pick Test_tagbsearch() changes from patch 9.0.0767.
Problem: too many strlen() calls in search.c
Solution: refactor code and remove more strlen() calls,
use explicit variable to remember strlen
(John Marriott)
closes: vim/vim#147968c85a2a49a
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem:
Higher-priority signs may be hidden by lower-priority signs.
Solution:
Place higher-priority signs from the left.
Example:
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='H', priority=1})
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='W', priority=2})
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='E', priority=3})
Before:
| |
H | W E |
^ | |
Not visible
After:
| |
| E W | H
| | ^
Not visible
Fixes#16632
Problem: Vim9: CTRL-] used in :def function does not work.
Solution: Omit count or prepend colon. (closesvim/vim#6769)
b3ea36c5bc
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: getregionpos() wrong with blockwise mode and multibyte.
Solution: Use textcol and textlen instead of start_vcol and end_vcol.
Handle coladd properly (zeertzjq).
Also remove unnecessary buflist_findnr() in add_regionpos_range(), as
getregionpos() has already switched buffer.
closes: vim/vim#14805c95e64f41f
Problem: regionpos may leak memory on error, coverity
complains about dereferencing Null pointer
Solution: free all list pointers (after v9.1.394),
return early if buflist_findnr() returns NULL
closes: vim/vim#14731b8ecedce79
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot get a list of positions describing a region
(Justin M. Keyes, after v9.1.0120)
Solution: Add the getregionpos() function
(Shougo Matsushita)
fixes: vim/vim#14609closes: vim/vim#14617b4757e627e
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: too many strlen() calls in the regexp engine
Solution: refactor code to retrieve strlen differently, make use
of bsearch() for getting the character class
(John Marriott)
closes: vim/vim#1464882792db631
Cherry-pick keyvalue_T and its comparison functions from patch 9.1.0256.
vim-patch:9.1.0410: warning about uninitialized variable
vim-patch:9.1.0412: typo in regexp_bt.c in DEBUG code
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Cannot move to previous/next rare word
(Colin Kennedy)
Solution: Add the ]r and [r motions (Christ van Willegen)
fixes: vim/vim#14773closes: vim/vim#147808e4c4c7d87
Co-authored-by: Christ van Willegen - van Noort <github.com@vanwillegen-vannoort.nl>
Problem: Unable to leave long line with 'smoothscroll' and 'scrolloff'.
Corrupted screen near the end of a long line with 'scrolloff'.
(Ernie Rael, after 9.1.0280)
Solution: Only correct cursor in case scroll_cursor_bot() was not itself
called to make the cursor visible. Avoid adjusting for
'scrolloff' beyond the text line height (Luuk van Baal)
b32055e504
vim-patch:9.1.0416: some screen dump tests can be improved
Problem: some screen dump tests can be improved (after 9.1.0414)
Solution: Make sure screen state changes properly and is captured in the
screen dumps (Luuk van Baal)
2e642734f4
Problem:
`vim.rpcnotify(0)` and `rpcnotify(0)` are documented as follows:
If {channel} is 0, the event is broadcast to all channels.
But that's not actually true. Channels must call `nvim_subscribe` to
receive "broadcast" events, so it's actually "multicast".
- Assuming there is a use-case for "broadcast", the current model adds
an extra step for broadcasting: all channels need to "subscribe".
- The presence of `nvim_subscribe` is a source of confusion for users,
because its name implies something more generally useful than what it
does.
Presumably the use-case of `nvim_subscribe` is to avoid "noise" on RPC
channels not expected a broadcast notification, and potentially an error
if the channel client reports an unknown event.
Solution:
- Deprecate `nvim_subscribe`/`nvim_unsubscribe`.
- If applications want to multicast, they can keep their own multicast
list. Or they can use `nvim_list_chans()` and `nvim_get_chan_info()`
to enumerate and filter the clients they want to target.
- Always send "broadcast" events to ALL channels. Don't require channels
to "subscribe" to receive broadcasts. This matches the documented
behavior of `rpcnotify()`.
Use uv_fs_realpath() instead.
It seems that uv_fs_realpath() has some problems on non-Linux platforms:
- macOS and other BSDs: this function will fail with UV_ELOOP if more
than 32 symlinks are found while resolving the given path. This limit
is hardcoded and cannot be sidestepped.
- Windows: while this function works in the common case, there are a
number of corner cases where it doesn't:
- Paths in ramdisk volumes created by tools which sidestep the Volume
Manager (such as ImDisk) cannot be resolved.
- Inconsistent casing when using drive letters.
- Resolved path bypasses subst'd drives.
Ref: https://docs.libuv.org/en/v1.x/fs.html#c.uv_fs_realpath
I don't know if the old implementation that uses uv_chdir() and uv_cwd()
also suffers from the same problems.
- For the ELOOP case, chdir() seems to have the same limitations.
- On Windows, Vim doesn't use anything like chdir() either. It uses
_wfullpath(), while libuv uses GetFinalPathNameByHandleW().
Problem: `has-ancestor?` is O(n²) for the depth of the tree since it iterates over each of the node's ancestors (bottom-up), and each ancestor takes O(n) time.
This happens because tree-sitter's nodes don't store their parent nodes, and the tree is searched (top-down) each time a new parent is requested.
Solution: Make use of new `ts_node_child_containing_descendant()` in tree-sitter v0.22.6 (which is now the minimum required version) to rewrite the `has-ancestor?` predicate in C to become O(n).
For a sample file, decreases the time taken by `has-ancestor?` from 360ms to 6ms.
Problem: smoothscroll may cause infinite loop, with
very narrow windows
(Jaehwang Jung, after v9.1.0280)
Solution: Check for width1 being negative, verify
that win_linetabsize does not overflow
fixes: vim/vim#14750closes: vim/vim#14772eff20eb35d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Compiler warning when building Nvim in Release mode:
In function ‘msg_puts_display’,
inlined from ‘disp_sb_line’ at **/src/nvim/message.c:2647:5:
**/src/nvim/message.c:2165:18: warning: ‘strnlen’ specified bound 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overread]
2165 | size_t len = strnlen(str, (size_t)maxlen);
| ^
Solution: Use strlen() when maxlen is negative.
Closes https://github.com/neovim/neovim/issues/28484.
Closes https://github.com/neovim/neovim/issues/28719.
Co-authored-by: Chris <crwebb85@gmail.com>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Jake B <16889000+jakethedev@users.noreply.github.com>
Co-authored-by: Jonathan Raines <jonathan.s.raines@gmail.com>
Co-authored-by: Yi Ming <ofseed@foxmail.com>
Co-authored-by: Zane Dufour <zane@znd4.me>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem:
The nvim_win_xx_ns function family introduced in ba0370b1d7
needs more bake-time. Currently it's narrowly defined for windows, but
other scopes ("buffer") and features are likely in the future.
Solution:
- Rename the API with double-underscore to mark it as EXPERIMENTAL.
TODO/FUTURE:
- Rename and change the signature to support more than just "window"
scope, and for other flexibility.
- Open question: we could choose either:
- "store scopes on namespaces", or
- "store namespaces on scopes (w:/b:/…)"
Problem: No scrolling happens with half-page scrolling with line
filling entire window when 'smoothscroll' is disabled.
(Mathias Rav, after v9.1.0285)
Solution: Adjust amount to move cursor by so that it is moved the same
number of lines as was scrolled, even when scrolling different
number of lines than requested with 'nosmoothscroll'.
58448e09be
Problem: Divide by zero with getmousepos() and 'smoothscroll'.
Solution: Don't compute skip_lines when width1 is zero.
(zeertzjq)
closes: vim/vim#14747031a745608
Problem: Invalidated regions that are flushed during startup are
cleared with unitialized "clear_attrs", which is perceived as
flickering.
Solution: Initialize "clear_attrs" with current terminal background color.
Problem: Wrong display with 'smoothscroll' when changing quickfix list.
Solution: Reset w_skipcol when replacing quickfix list (zeertzjq).
closes: vim/vim#14730c7a8eb5ff2
This most likely doesn't matter as all windows are redrawn when
switching tabpages and w_valid is reset is entering window, but still
check all tabpages for consistency with changed_common().
This avoids redraw when adding/removing an empty namespace for a window.
This also avoids marktree traversal when clearing a namespace that has
already been cleared, which is added as a benchmark.
Experimental and subject to future changes.
Add a way to redraw certain elements that are not redrawn while Nvim is waiting
for input, or currently have no API to do so. This API covers all that can be
done with the :redraw* commands, in addition to the following new features:
- Immediately move the cursor to a (non-current) window.
- Target a specific window or buffer to mark for redraw.
- Mark a buffer range for redraw (replaces nvim__buf_redraw_range()).
- Redraw the 'statuscolumn'.
Problem: cursor() and getregion() don't handle v:maxcol well.
Solution: Add special handling for v:maxcol like setpos() does.
(zeertzjq)
closes: vim/vim#146982ffdae7948
Problem: Calling :redraw from vim.ui_attach() callback results in
recursive cmdline/message events.
Solution: Avoid recursiveness where possible and replace global "call_buf"
with separate, temporary buffers for each event so that when a Lua
callback for one event fires another event, that does not result
in invalid memory access.
This reverts commit 15e77a56b7.
Subpriorities were added in https://github.com/neovim/neovim/pull/27131
as a mechanism for enforcing query order when using iter_matches in the
Tree-sitter highlighter. However, iter_matches proved to have too many
complications to use in the highlighter so we eventually reverted back
to using iter_captures (https://github.com/neovim/neovim/pull/27901).
Thus, subpriorities are no longer needed and can be removed.
Problem: cbuffer and similar quickfix and locationlist commands don't
accept a range, even so it is documented they should
(ilan-schemoul, after 8.1.1241)
Solution: Define ex commands with ADDR_LINES instead of ADDR_OTHER
fixes: vim/vim#14638closes: vim/vim#14657652c821366
Co-authored-by: Christian Brabandt <cb@256bit.org>
Instead of painfully messing with timing to determine if queries were
reparsed, we can simply keep a counter next to the call to ts_query_new
Also memoization had a hidden dependency on the garbage collection of
the the key, a hash value which never is kept around in memory. this was
done intentionally as the hash does not capture all relevant state for the
query (external included files) even if actual query objects still
would be reachable in memory. To make the test fully deterministic in
CI, we explicitly control GC.
In particular, TUI manages its own screen buffers and highlight table, so we don't need
to run init_highlight() and default_grid_alloc() in the ui client process.
Problem: Calculating line height for unnecessary amount of lines with
half-page scrolling (zhscn, after 9.1.0280)
Solution: Replace "limit_winheight" argument with higher resolution
"max" argument to which to limit the calculated line height
in plines_m_win() to (Luuk van Baal)
32d701f51b
Based on feedback from #28324, pass -H and -I to regular grep
(available on all platforms officially supported by Neovim), and
only pass -uu to ripgrep. This makes :grep ignore binary files by
default in both cases.
There's no "rule" or bad practice or whatever that says we cannot
generate c files. it is is just that we have ~20 generated headers
and ~2 generated sources and there is nothing in these two generated
source files which sets them aparts. Lua bindings are not different from
rpc bindings, and pathdef is not different from versiondef.
So to simplify build logic and ease the future port to build.zig,
streamline the build to only have generated headers, no direct generated
.c files.
Also "nlua_add_api_functions" had its prototype duplicated twice which
defeated the point of having mandatory prototypes (one source of truth).
Problem: Enabling ext_messages claims to set 'cmdheight' to zero, but
only does so for the current tabpage.
Solution: Set stored 'cmdheight' value to zero for all tabpages.
Problem: When :edit an existing buffer, line('w$') may return a
wrong result.
Solution: Reset w_valid in curwin_init() (Jaehwang Jung)
`do_ecmd()` reinitializes the current window (`curwin_init()`) whose
`w_valid` field may have `VALID_BOTLINE` set. Resetting `w_botline`
without marking it as invalid makes subsequent `validate_botline()`
calls a no-op, thus resulting in wrong `line('w$')` value.
closes: vim/vim#14642eb80b8304e
Co-authored-by: Jaehwang Jung <tomtomjhj@gmail.com>
Problem: ops.c code uses too many strlen() calls
Solution: Refactor code and remove more strlen() calls
(John Marriott)
closes: vim/vim#1459838b9f45253
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Vim9: missing :endif not reported when using :windo.
Solution: Pass a getline function to do_cmdline(). (closesvim/vim#7650)
9567efa1b4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when typing many keys with D- modifier (after 9.1.0227).
Solution: Don't treat a 0x80 byte inside a special sequence as the start
of a special sequence (zeertzjq).
closes: vim/vim#146136b13e3d4e4
**Problems**
When launching Neovim on Terminal.app on macOS (Apple Terminal),
it briefly shows like
`p$qm+q5463;524742;73657472676266;73657472676262$qm` in orange
background color partially on the screen.
**Solution**
Since Terminal.app seems not supporting DECRQM and DECRQSS queries,
calling `tui_request_term_mode` and `tui_query_extended_underline`
caused this unexpected output.
Therefore, if we know it's Apple Terminal (when `nsterm` is `true`),
don't call these checks.
Tested on Terminal.app (2.14, 453) on macOS 14.4.1.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Page scrolling does not always place the cursor at the top or
bottom of the window (Mathias Rav)
Solution: Place the cursor at the top or bottom of the window.
(Luuk van Baal)
4b6b0c4024
TODO:
FUNC_API_REMOTE_ONLY APIs such as `nvim_ui_*` cannot (yet) be used in
`nvim_exec_lua`. We can change FUNC_API_REMOTE_ONLY to allow
Vimscript/Lua to pass an explicit `channel_id`. #28437
Problem:
While the fold level computation is incremental, the evaluation of the
foldexpr is done on the full buffer. Despite that the foldexpr reads
from the cache, it can take tens of milliseconds for moderately big (10K
lines) buffers.
Solution:
Track the range of lines on which the foldexpr should be evaluated.
Problem: Using xstrlcpy() when the exact length of the string to be
copied is known is not ideal because it requires adding 1 to
the length and an unnecessary strlen().
Solution: Add xmemcpyz() and use it in place of such xstrlcpy() calls.
Problem: No test that completing a partial mapping clears 'showcmd'.
Solution: Complete partial mappings in Test_showcmd_part_map() instead
of using :echo. Adjust some comments (zeertzjq).
closes: vim/vim#14580094c4390bd
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: vim/vim#14572acdfb8a979
Problem: a few memory leaks are found
(LuMingYinDetect )
Solution: properly free the memory
Fixes the following problems:
- Memory leak in f_maplist()
fixes: vim/vim#14486
- Memory leak in option.c
fixes: vim/vim#14485
- Memory leak in f_resolve()
fixes: vim/vim#14484
- Memory leak in f_autocmd_get()
related: vim/vim#14474
- Memory leak in dict_extend_func()
fixes: vim/vim#14477fixes: vim/vim#14238closes: vim/vim#1451729269a71b5
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Error with matchaddpos() and empty list
(@rickhow)
Solution: Return early for an empty list
fixes: vim/vim#14525closes: vim/vim#14563f7d31adcc2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Renaming non-current buffer changes working directory when
'autochdir' is set.
Solution: Temporarily disable 'autochdir'. Add more tests for the
win_set_buf change.
- Test maparg() and maplist() in the same test.
- Use matches() instead of string.match().
- Avoid overlong lines and strange spacing in exec_lua().
- Revert code change from last PR as the variable may be needed.
Problem: String interpolation fails for List type
Solution: use implicit string(list) for string interpolation and :put =
(Yegappan Lakshmanan)
related: vim/vim#14529closes: vim/vim#14556bce51d9005
Cherry-pick eval_to_string_eap() from patch 8.2.1914.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: noautocmd is confusing; despite its name, it doesn't block all
autocommands (instead it blocks only those related to setting the buffer), and
is commonly used by plugins to open windows while producing minimal
side-effects.
Solution: be consistent and block all autocommands when noautocmd is set.
This includes WinNew (again), plus autocommands from entering the window (if
enter is set) like WinEnter, WinLeave, TabEnter, .etc.
See the discussion at https://github.com/neovim/neovim/pull/14659#issuecomment-2040029517
for more information.
Remove win_set_buf's noautocmd argument, as it's no longer needed.
NOTE: pum_create_float_preview sets noautocmd for win_set_buf, but all its
callers already use block_autocmds.
Despite that, pum_create_float_preview doesn't actually properly handle
autocommands (it has no checks for whether those from win_enter or
nvim_create_buf free the window).
For now, ensure autocommands are blocked within it for correctness (in case it's
ever called outside of a block_autocmds context; the function seems to have been
refactored in #26739 anyway).
Problem: Wrong cursor position after using setcellwidths().
Solution: Invalidate cursor position in addition to redrawing.
(zeertzjq)
closes: vim/vim#1454505aacec6ab
Reorder functions in test_utf8.vim to match upstream.
Problem: Crash when using heredoc with comment in command block.
Solution: Handle a newline more like the end of the line, fix coverity
warning (zeertzjq).
closes: vim/vim#145351f5175d9af
If the filename passed to vim_FullName() is a relative directory, and
does not exist, it is appended to the current working directory. Since
the return value of append_path() was ignored, and if the buffer length
was too small to fit getcwd() + dirname(filename), it would still try to
append the basename(filename).
This was manifesting as a failure in test/unit/path_spec.lua in:
itp('fails and uses filename if given filename contains non-existing directory', ..
This failure occurs when running the tests from directory with a short
path such as: /work/src/nv
test/unit/path_spec.lua:420: Expected objects to be the same.
Passed in:
(string) '/work/src/nv/test.file'
Expected:
(string) 'non_existing_dir/test.file'
This return value for the second call to append_path() to append
basename(filename) was checked, and this is where it would fail for
normal / longer getcwd()s.
Problem: POSIX function name in exarg struct causes issues
on OpenVMS
Solution: Rename getline member in exarg struct to ea_getline,
remove isinf() workaround for VMS
There are compilers that do not treat well POSIX functions - like
getline - usage in the structs.
Older VMS compilers could digest this... but the newer OpenVMS compilers
( like VSI C x86-64 X7.4-843 (GEM 50XB9) ) cannot deal with these
structs. This could be limited to getline() that is defined via
getdelim() and might not affect all POSIX functions in general - but
avoiding POSIX function names usage in the structs is a "safe side"
practice without compromising the functionality or the code readability.
The previous OpenVMS X86 port used a workaround limiting the compiler
capabilities using __CRTL_VER_OVERRIDE=80400000
In order to make the OpenVMS port future proof, this pull request
proposes a possible solution.
closes: vim/vim#137046fdb628082
Co-authored-by: Zoltan Arpadffy <zoltan.arpadffy@gmail.com>
Problem: overflow detection not accurate when adding digits
Solution: Use a helper function
Use a helper function to better detect overflows before adding integer
digits to a long or an integer variable respectively. Signal the
overflow to the caller function.
closes: vim/vim#1353922cbc8a4e1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Patch 9.1.0296 causes too many issues
(Tony Mechelynck, chdiza, CI)
Solution: Back out the change for now
Revert "patch 9.1.0296: regexp: engines do not handle case-folding well"
This reverts commit 7a27c108e0509f3255ebdcb6558e896c223e4d23 it causes
issues with syntax highlighting and breaks the FreeBSD and MacOS CI. It
needs more work.
fixes: vim/vim#14487c97f4d61cd
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: heredoc start may be recognized in string.
Solution: Don't skip to closing bracket for invalid list assignment.
(zeertzjq)
closes: vim/vim#144721817ccdb10
Problem:
Decoration provider `on_line` handler is invoked for diff filler line
below the last buffer line. This does not match the documentation:
"called for each buffer line".
Solution:
Check `end_fill`.
Problem: when reconfig current float win without win key in nvim_win_set_config will cause float win position changed when move.
Solution: don't relative itself.
Problem: Regex engines do not handle case-folding well
Solution: Correctly calculate byte length of characters to skip
When the regexp engine compares two utf-8 codepoints case insensitively
it may match an adjacent character, because it assumes it can step over
as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some single-byte
value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte
value 's' so by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
- we try to match the correct length for the pattern and the text
- in case of a match, we step over it correctly
The same thing can happen for the NFA engine, when skipping to the next
character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over. So
this needs to be adjusted in find_match_text() as well.
A related issue turned out, when prog->match_text is actually empty. In
that case we should try to find the next match and skip this condition.
fixes: vim/vim#14294closes: vim/vim#144337a27c108e0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: comment may be treated as heredoc start.
(Ernie Rael)
Solution: Use skip_var_list() instead of find_name_end().
(zeertzjq)
fixes: vim/vim#14444closes: vim/vim#144469a91d2b72c
Problem: plines_m_win() does not take into account it's "limit_winheight"
argument for filler lines below the last line of the buffer.
(after v9.1.0280)
Solution: Check window height when "limit_winheight" is TRUE.
(Luuk van Baal)
08b0f632c1
Problem: Some code lines not covered by tests.
Solution: Add a few more test cases. Fix getting more than one error for
invalid assignment.
8b716f5f22
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Logic to make sure cursor is in visible part of the screen after
scrolling the text with 'smoothscroll' is scattered, asymmetric
and contains bugs.
Solution: Adjust and create helper function for 'smoothscroll' cursor logic.
(Luuk van Baal)
9148ba8a46
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
bd28cae1f1
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
It's a combination of add_custom_target and add_custom_command that does
what most users probably expect should happen.
This also fixes `make clean` removing files tracked by git.
Problem: Autocommand may change currect directory after :tcd and :lcd.
Solution: Also clear tp_localdir and w_localdir when using aucmd_win.
(zeertzjq)
closes: vim/vim#144359d956ee8ea
runtime(doc): Normalise builtin-function optional parameter formatting
These should generally be formatted as func([{arg}]) and referenced as
{arg} in the description.
closes: vim/vim#144389cd9e759ab
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Also close Nvim instance before removing log file, otherwise the Nvim
instance will still write to the log file.
Also adjust log level in libuv_process_spawn(). Ref #27660
Problem: Invalid assert for empty signcols range. The empty range
should already be removed from "b_signcols" at this point.
The "clear" == kTrue call before the splice that made the
range empty will have removed it, and the "clear" == kNone
call after the splice already ignores the empty range.
Solution: Return early when "row2" < "row1".
Problem: File name entered in GUI dialog is ignored (after v9.1.0265)
Solution: Only set file name to "Untitled" if GUI dialog didn't set it.
(zeertzjq)
closes: vim/vim#14417c20bdf1107
Problem: console dialog cannot save unnamed buffers
Solution: set bufname before save (glepnir). Define dialog_con_gui
to test for GUI+Console dialog support, use it to skip
the test when the GUI feature has been defined.
Note: The dialog_changed() function will also try to call the
browse_save_fname() function, when FEAT_BROWSE is defined (which is only
defined in a GUI build of Vim). This will eventually lead to a call of
do_browse(), which causes an error message if a GUI is not currently
running (see the TODO: in do_browse()) and will then lead to a failure
in Test_goto_buf_with_onfirm().
Therefore, we must disable the Test_goto_buf_with_onfirm(), when the
dialog_con_gui feature is enabled (which basically means dialog feature
for GUI and Console builds, in contrast to the dialog_con and dialog_gui
feature).
(Previously this wasn't a problem, because the test aborted in the YES
case for the :confirm :b XgotoConf case and did therefore not run into
the browse function call)
closes: vim/vim#14398df46115fc8
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The usage of `_BitScanForward64` causes linking to fail on some systems.
Solution: Correctly check if it exists using `check_c_source_compiles`.
Problem: Normal mode TextChanged isn't tested properly.
Solution: Combine Test_Changed_ChangedI() and Test_Changed_ChangedI_2()
and also run it on Windows. Fix a typo in main.c.
(zeertzjq)
closes: vim/vim#14396c422662933
Problem: Typing "interrupt" at debug prompt may keep exception around,
causing function calls to fail.
Solution: Discard any exception at the toplevel. (closesvim/vim#9532)
069613c9e8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: [security]: Heap buffer overflow when calling complete_add()
in the first call of 'completefunc'
Solution: Call check_cursor() after calling 'completefunc' (zeertzjq)
closes: vim/vim#143910a419e07a7
Problem: Adding a character for incsearch fails at end of line.
Solution: Only check cursor line number.
d4566c14e7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Attempting to set 'noautocmd' for an existing window throws an error
that just says "Invalid key: 'noautocmd'" which is not very helpful.
Solution: Explain that 'noautocmd' can't be used with existing windows.
Problem: Filetype test fails.
Solution: Move detection by name before detection by extension.
Improve TextChanged test and remove wrong test and fix
a typo in a comment (zeertzjq).
closes: vim/vim#143738eb7523802
The changes to filetype.vim are N/A since Nvim always prefers filename
matches to extension matches.
Problem: Filetype may be undetected when a SwapExists autocommand sets
filetype in another buffer.
Solution: Make filetype detection state buffer-specific. Also fix a
similar problem for 'modified' (zeertzjq).
closes: vim/vim#143445bf6c2117f
Problem: TextChanged autocommand not triggered under some circumstances
(Sergey Vlasov)
Solution: Trigger TextChanged when TextChangedI has not been triggered
fixes: vim/vim#14332closes: vim/vim#143398603270293
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Recording may still be wrong in Select mode (after 8.2.3993).
Solution: Make sure a character isn't split between two buffer blocks.
(zeertzjq)
closes: vim/vim#14326ea95f1a5ad
Problem: Two unrelated things are tested by a single test.
Solution: Split it into two, restoring the old Test_brace_single_line().
Add missing cleanup to some tests.
(zeertzjq)
closes: vim/vim#14323ad493ef3ea
Problem: Current behavior of stateful intro message is too persistent.
For example, it is still drawn if new empty buffer is shown in current
window (either by explicitly setting it or after `tabnew`). Although
the buffer is empty, the act of it being shown should be made visible.
Solution: Make intro message persist if all is true:
- Current buffer is the same as it was just after start, i.e. empty
nameless with initial handle (i.e. 1).
- Current window is the same as it was just after start, i.e. single
non-floating with initial handle.
Problem: using win_viewport for implementing smooth scrolling in an external
UI might run into problems when winbar or borders is used, as there is
no indication that the entire grid is not used for scrolled buffer text.
Solution: add `win_viewport_margins` event.
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Unnecessary multiplications in backspace code, as
"col / ts * ts" is the same as "col - col % ts".
Solution: Change "col / ts * ts" to "col - col % ts". Adjust the loop
and the comments ins_bs() to be easier to understand. Update
tests to reset 'smarttab' properly.
(zeertzjq)
closes: vim/vim#143088ede7a0694
Problem: regexp: verymagic cannot match before/after a mark
Solution: Correctly check for the very magic check (Julio B)
Fix regexp parser for \v%>'m and \v%<'m
Currently \v%'m works fine, but it is unable to match before or after
the position of mark m.
closes: vim/vim#1430946fa3c7e27
Co-authored-by: Julio B <julio.bacel@gmail.com>
Problem: Error on exit with EXITFREE and 'winfixbuf'.
Solution: Handle DT_FREE before checking for 'winfixbuf'.
(zeertzjq)
closes: vim/vim#14314620e85265c
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
b9f5b95b7b
Problem: winfixbuf does not allow to re-edit current buffer
(Tim Pope, after v9.1.0147)
Solution: Explicitly allow :e even when 'winfixbuf' is set,
since it just re-loads the current buffer
(Colin Kennedy)
fixes: vim/vim#14237closes: vim/vim#1428665e580bd56
- Group functions for key encoding together.
- Move the handle_modereport() branch before the handle_unknown_csi()
branch to match the order of the corresponding functions, but don't
move handle_term_response() yet, as that will be subject to further
changes (e.g. for #26744).
Problem: Currently, the `immutable` property of options can be applied for options that are hidden and options whose value simply can't be changed. Which is problematic when attempting to convert an option like `'maxcombine'` into an immutable option, because trying to `:set` an immutable option currently gives an error, which is only desired behavior for hidden options, not options that are actually immutable.
Solution: Separate the `immutable` property into two distinct `hidden` and `immutable` properties. Change all options with the `immutable` property to use the `hidden` property instead. Also add `p_mco` as an `immutable` option, as its value cannot be changed, and the underlying variable is not used anywhere.
Problem: Backspace inserts spaces with virtual text and 'smarttab'.
Solution: Ignore virtual text and wrapping when backspacing.
(zeertzjq)
related: neovim/neovim#28005closes: vim/vim#142960185c77014
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Problem: Cannot use modifiers before :-Ntabmove.
Solution: Check backwards from the command instead of checking from the
start of the command line. Slightly adjust docs to make them
more consistent (zeertzjq).
closes: vim/vim#14289076faac537
Problem: E1509 when writing extended attributes to a symlink.
Solution: Copy the file before copying extended attributes.
On Fedora, the attribute being set is "security.selinux". For normal,
non-symlink files this attribute doesn't show up and that's why calling
os_copy_xattr() doesn't break in that case.
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: vim/vim#14275ad38769030
Problem: Vim9: string index and slice does not include composing chars.
Solution: Include composing characters. (issue vim/vim#6563)
0289a093a4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: string and list index work differently.
Solution: Make string index work like list index. (closesvim/vim#7643)
e7525c5520
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: memleak with ex_drop(), NULL dereference
(zeertzjq)
Solution: revert back to ex_rewind(), use curbuf instead of buf
fixes: vim/vim#14246closes: vim/vim#1425185a769d466
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: vim/vim#14219closes: vim/vim#14220978178823b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: gcc complains about uninitialized var
(Tony Mechelynck)
Solution: initialize to NULL
9eb236f455
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: `xctz()` uses a fallback algorithm for MSVC, even though a compiler builtin exists.
Solution: Make `xctz()` use the compiler builtin for MSVC compiler.
Problem: `set_string_option_direct()` contains a separate codepath specifically for setting string options. Not only is that unnecessary code duplication, but it's also limited to only string options.
Solution: Replace `set_string_option_direct()` with `set_option_direct()` which calls `set_option()` under the hood. This reduces code duplication and allows directly setting an option of any type.
Problem: complete_info() returns wrong order of items
(after v9.0.2018)
Solution: Revert Patch v9.0.2018
(Girish Palya)
bug fix: complete_info() gives wrong results
1) complete_info() reverses list of items during <c-p>
2) 'selected' item index is wrong during <c-p>
3) number of items returnd can be wrong
Solution:
- Decouple 'cp_number' from 'selected' index since they need not be
correlated
- Do not iterate the list backwards
- Add targeted tests
Regression introduced by 69fb5afb3b
Following are unnecessary commits to patch problems from above:
fef6630166daef8c7437
All the tests from above commits are retained though.
fixes: vim/vim#14204closes: vim/vim#142418950bf7f8b
Remove EMPTY_IF_NULL() as it has been unnecessary since #12673.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: assertion failure in nvim_create_buf if buflist_new autocommands open
a swapfile when "scratch" is set.
Solution: block autocommands when setting up the buffer; fire them later
instead.
Note that, unlike buflist_new, I don't check if autocommands aborted script
processing; the buffer is already created and configured at that point, so might
as well return the handle anyway.
Rather than repeat try_{start,end} and {un}block_autocmds for each relevant
operation, just do it at the start and near the end. This means that, if
TermResponse fires from unblock_autocmds for whatever reason, it can see the
buffer in an already configured state if we didn't bail due to an error (plus
it's probably a bit cleaner this way).
Problem:
`TSNode:_rawquery()` is complicated, has known issues and the Lua and
C code is awkwardly coupled (see logic with `active`).
Solution:
- Add `TSQueryCursor` and `TSQueryMatch` bindings.
- Replace `TSNode:_rawquery()` with `TSQueryCursor:next_capture()` and `TSQueryCursor:next_match()`
- Do more stuff in Lua
- API for `Query:iter_captures()` and `Query:iter_matches()` remains the same.
- `treesitter.c` no longer contains any logic related to predicates.
- Add `match_limit` option to `iter_matches()`. Default is still 256.
Problem: Not all standard treesitter groups are documented.
Solution: Document them all (without relying on fallback); add default
link for new `*.builtin` groups to `Special` and `@keyword.type` to
`Structure`. Remove `@markup.environment.*` which only made sense for
LaTeX.
After #25470 the `s` pointer is advanced before calling store_sb_text()
when a newline character is found, and store_sb_text() sets `sb_str` to
`s`, so it's not possible for `s == sb_str + 1` and `*sb_str == '\n'` to
be satisfied at the same time.
Problem: Wrong cursor position when clicking after end of line with
'rightleft', 'virtualedit' and conceal.
Solution: Set values in ScreenCols[] also with SLF_RIGHTLEFT. Also fix
off-by-one cursor position with 'colorcolumn' (zeertzjq).
closes: vim/vim#14218deb2204bff
Problem: Wrong cursor position when clicking after end of line with
'virtualedit', conceal and virtual text.
Solution: Always fill linebuf_vcol[] for the columns to clear.
There is no test for using 'cursorline' in Normal mode in a terminal
buffer, so add a test and fix 'cursorcolumn' remaining when entering
Terminal mode.
Also move synIDattr() tests to ui/highlight_spec.lua.
Problem: Cursor line is unconcealed when pressing 'r' in Normal mode
when 'concealcursor' contains 'n' but not 'i'.
Solution: Don't check conceal when pressing 'r' in Normal mode.
Vim doesn't have this problem because it doesn't call redrawWinline() in
conceal_check_cursor_line() and instead sets a global variable.
Problem: Cursor position wrong when clicking with conceal and wrap.
Solution: Use the virtual column of the last char for ScreenCols[] in
boguscols. Remove use of MAXCOL in ScreenCols[]. Rename
third argument of wlv_screen_line() to "clear_end" as that's
clearer what it does (zeertzjq).
related: 14192
closes: vim/vim#14200d0c1b7723f
Rename win_put_linebuf() to wlv_put_linebuf().
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
Problem: Can define function with invalid name inside 'formatexpr'.
Solution: Use goto instead of checking for did_emsg later.
(zeertzjq)
closes: vim/vim#142096a04bf5ee5
Problem: Wrong display or screenpos() result when toggling diff mode.
Solution: Reset w_skipcol when disabling 'wrap'. Reset w_leftcol when
enabling 'wrap' (zeertzjq).
fixes: vim/vim#14210closes: vim/vim#142119e7f1fc2f1
Problem: Vim9: no error if a function shadows a script variable.
Solution: Check the function doesn't shadow a variable. (closesvim/vim#9310)
052ff291d7
Omit EVAL_VAR_NO_FUNC: Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
As this message is literally drawn on top of the EOB area of the first
window, the simple solution is to just draw the message on top of the
grid of the first window.
We still want #24764 (msg_intro event) but now only for ext_messages.
Problem: The ext_cmdline cursor position on the screen seems to rely on
an implicit assumption that the event listener implements a
cmdline window that is made the current window which is
problematic (e.g. breaks 'incsearch' in the actual current
window).
Solution: Remove this assumption and allow nvim_win_set_cursor() to move
the cursor on the screen to a non-current window (previous
commit).
Problem: Cursor position set by nvim_win_set_cursor() is not reflected
on the screen when followed by a blocking call like getchar().
Solution: Immediately update the cursor position on the grid.
Problem: no overflow check for string formatting
Solution: Check message formatting function for overflow.
(Chris van Willegen)
closes: vim/vim#13799c35fc03dbd
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: vim/vim#14197010e1539d6
Problem:
CursorColumn highlight behavior is inconsistent with 'virtualedit' set:
- If cursor is on the text, CursorColumn is not shown.
- If cursor is after end of line, CursorColumn is shown.
Solution:
Don't shown CursorColumn on current line if cursor is after end of line.
Vim doesn't have this problem because in most cases it uses the code
path for drawing buffer text when CursorColumn highlight is needed.
Instead of randomly disappearing because some random event might have
caused mid_start or bot_scroll_start to randomly take a low value, treat
intro message as a _first class stateful_ thing.
This means that intro message will kept being _redrawn_ as long as we
are in the state it should be shown. This also includes screen resizes.
you will not lose the intro message because there was a delay in
detecting terminal features.
Problem: Coverity reports dead code.
Solution: Remove the dead code. Also fix a mistake in ml_get_pos_len()
and update some comments (zeertzjq).
closes: vim/vim#141898c55d60658
Problem: More code can use ml_get_buf_len() instead of STRLEN().
Solution: Change more STRLEN() calls to ml_get_buf_len(). Also do not
set ml_line_textlen in ml_replace_len() if "has_props" is set,
because "len_arg" also includes the size of text properties in
that case. (zeertzjq)
closes: vim/vim#1418394b7c3233e
Problem: Text properties position wrong after shifting text.
Solution: Adjust the text properties when shifting a block of text.
(closesvim/vim#10418)
4b93674159
Most of the patch is already merged. Add an assertion in place of "added".
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: vim/vim#14190253ff4dece
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: vim/vim#1419221b0a3df8c
Problem: E1513 might be confusing
(Christoph Thoma)
Solution: reword error message, fix test to not
depend on the actual message
fixes: vim/vim#141890a32b8854b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: vim/vim#14191
Nvim: don't reuse "wp" for "topleft" in winframe_remove, so the change
integrates better with the call to winframe_find_altwin before it.
5866bc3a0f
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: small improvements can be made to split-move related
functions.
Solution: apply them (Sean Dewar):
Some of these changes were already applied to Nvim.
Here are the ones which were missing:
- Improve some doc comments (frame_flatten should still work for non-current
tabpages, despite the topframe check, which looks benign, though I'm unsure if
it's still needed; see vim/vim#2467).
- f_win_splitmove should check_split_disallowed on wp, not targetwin, as that's
what win_splitmove checks (though it's probably unnecessary to check
b_locked_split at all; see vim/vim#14109, which I hope to get around to
finishing at some point).
- Apply the winframe_restore comment changes, and remove win_comp_pos from after
winframe_restore in win_splitmove, as it shouldn't be necessary (no need to
remove it from nvim_win_set_config too, as it was already omitted).
Move win_append after winframe_restore in win_splitmove to match Vim.
closes: vim/vim#141855cac1a9bee
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in vim/vim#14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: vim/vim#14047closes: vim/vim#14186d64801e913
Problem: current window number returned by tabpagewinnr may be outdated
when called from win_execute for the original tabpage.
Solution: update the original tabpage's tp_curwin in switch_win; use
{un}use_tabpage instead. Don't do it in restore_win to ensure
tp_curwin of the temporarily visited tabpage is unchanged from
switch_win visiting it, as before. (Sean Dewar)
Maybe restore_win should only restore tp_curwin if
`curtab == switchwin->sw_curtab`, in case the user changed tabpages from within
win_execute, but not doing that is consistent with the old behaviour.
related: vim/vim#14186e101028a5c
Current uses of vim_strup() calls memcpy()/strcpy() before calling vim_strup().
This results in 2 * strlen(string) operations.
We can trivially convert to lowercase while copying the string instead.
The original implementation has a worst-case of O(n^2). Every time
rem_backslash() is true, it calculates the length of the rest of the
string, and shift the rest of it to the left; backslash_halve_save()
copies the original string before doing backslash_halve().
The new implementation is O(n). It will find the first character where
rem_backslash() is true (it will do nothing if it's always false), and
shift the characters in-place; backslash_halve_save() avoids copying the
original string before doing backslash_halve().
Problem: too many STRLEN() calls
Solution: Make use of ml_get_len() calls instead
(John Marriott)
closes: vim/vim#14123bfcc895482
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Internal error with blockwise getregion() in another buffer
Solution: Also change curwin->w_buffer when changing curbuf (zeertzjq)
closes: vim/vim#141795406eb8722
Problem: Text properties are wrong after "cc". (Axel Forsman)
Solution: Pass the deleted byte count to inserted_bytes(). (closesvim/vim#10412,
closesvim/vim#7737, closesvim/vim#5763)
d0b1a09f44
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Arbitrary restriction on 'cmdheight' with ext_messages.
The 'cmdheight'-area may be desirable for the replacing
cmdline.
Solution: Allow non-zero 'cmdheight' with ext_messages.
Problem: may not be clear why failing to split causes an ":Xdo" command
to abort if 'wfb' is set.
Solution: do not return immediately if win_split fails, so E1513 is
still given. Expect both errors in the test. Also fix tests to
pass CI.
(Sean Dewar)
closes: vim/vim#14152769eb2d0c3
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Coverity complains about ignoring return value of win_split()
(after v9.1.150)
Solution: Check if win_split() failed, add winfixbuf.res to Makefile
af7ae81600
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: several minor 'winfixbuf' issues exist, mostly relating to the
quickfix list
Solution: address them and adjust tests. Retab and reflow a few things too.
(Sean Dewar)
Things touched include:
- Replace the semsgs with gettext'd emsgs.
- Handle window switching in ex_listdo properly, so curbuf and curwin
are kept in-sync and trigger autocommands; handle those properly.
- Don't change the list entry index in qf_jump_edit_buffer if we fail
due to 'wfb' (achieved by returning FAIL; QF_ABORT should only be used
if the list was changed).
- Make qf_jump_edit_buffer actually switch to prevwin when using `:cXX`
commands **outside** of the list window if 'wfb' is set in curwin.
Handle autocommands properly in case they mess with the list.
NOTE: previously, it seemed to split if 'wfb' was set, but do nothing
and fail if prevwin is *valid*. This behaviour seemed strange, and maybe
unintentional? Now it aligns more with what's described for the `:cXX`
commands in the original PR description when used outside a list window,
I think.
- In both functions, only consider prevwin if 'wfb' isn't set for it;
fallback to splitting otherwise.
- Use win_split to split. Not sure if there was a specific reason for
using ex_splitview. win_split is simpler and respects modifiers like
:vertical that may have been used. Plus, its return value can be checked
for setting opened_window in qf code (technically win_split_ins autocmds
could immediately close it or change windows, in which the qf code might
close some other window on failure; it's already the case elsewhere,
though).
closes: vim/vim#141424bb505e28c
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: qf_goto_win_with_qfl_file may check if prevwin has 'winfixbuf'
set without checking if it's valid first.
Solution: Reverse the condition. Add a test, a modeline, and a missing
CheckFeature. (Searn Dewar)
closes: vim/vim#141405131f224da
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
`get_target_property(<var> ...)` sets `<var>` to `<var>-NOTFOUND` if the
property doesn't exist for the given target. Detect this situation to
avoid adding various `-Dprop-NOTFOUND` and `-Iprop-NOTFOUND` to the
command-line when generating the headers.
Problem: Internal error or crash when passing invalid position to
getregion().
Solution: Give an error for invalid position (zeertzjq).
closes: vim/vim#1417226dd09ad5e
Problem: too many STRLEN calls when getting a memline
Solution: Optimize calls to STRLEN(), add a few functions in memline.c
that return the byte length instead of relying on STRLEN()
(John Marriott)
closes: vim/vim#1405202d7a6c6cf
Cherry-pick line break changes from patch 8.1.0226.
Cherry-pick ml_line_len from patch 8.1.0579.
Cherry-pick test_comments.vim change from patch 9.1.0153.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: problem with writing extended attributes on failure
Solution: Change return type to ssize_t and check listxattr's return
value correctly on failure (Paul Tagliamonte)
The existing logic will return when the listxattr call returns with the
errno set to ENOTSUP (or a size of 0 bytes), without checking to see if
listxattr actually failed. listxattr can fail with at least E2BIG,
ENOTSUP, ERANGE, or anything that `stat(2)` can fail with (in my case;
ENOENT from stat).
The returned size is stored to a size_t, but the return type is a
ssize_t. On failure, listxattr returns -1, which will get translated to
size_t's MAX. If the listxattr call failed with anything other than
ENOTSUP, this triggers a request for size_t MAX bytes.
This means that, if the listxattr call fails with anything other than
ENOTSUP on save, vim will error with
`E342: Out of memory! (allocating 18446744073709551615 bytes)`
(keen observers will note 18446744073709551615 is 0xffffffffffffffff)
In reality, this is likely masking a different (usually filesystem?)
error -- but at least it's an error being pushed to the user now, and we
don't try to allocate size_t MAX bytes.
I've opted to change the type that we store listxattr to from size_t to
ssize_t, to match listxattr(2)'s signature, and to check for the -1
return value. Additionally, I've removed the errno check -- if we get a
listxattr failure for any reason, we may as well bail without trying;
it's not like we can even recover.
closes: vim/vim#1416914759ded57
Co-authored-by: Paul R. Tagliamonte <paultag@gmail.com>
This reverts PR #27793.
On second thought, this solution may still crash, because it can leave a
window with a NULL buffer if there are autocommand windows or if closing
a floating window fails. It also makes close_last_window_tabpage() more
complicated, so revert it.
Problem: Crash in WinClosed after BufUnload closes other windows
Solution: Don't trigger WinClosed if the buffer is NULL (zeertzjq)
Now win_close_othertab() doesn't trigger any autocommands if the buffer
is NULL, so remove the autocmd blocking above (which was added not long
ago in patch v9.0.0550) for consistency.
Also remove an unreachable close_last_window_tabpage() above:
- It is only reached if only_one_window() returns TRUE and last_window()
returns FALSE.
- If only_one_window() returns TRUE, there is only one tabpage.
- If there is only one tabpage and last_window() returns FALSE, the
one_window() in last_window() must return FALSE, and the ONE_WINDOW
in close_last_window_tabpage() must also be FALSE.
- So close_last_window_tabpage() doesn't do anything and returns FALSE.
Then the curtab != prev_curtab check also doesn't make much sense, and
the only_one_window() can be replaced with a check for popup and a call
to last_window() since this is a stricter check than only_one_window().
closes: vim/vim#14166b2ec0da080
Problem: expand() removes a slash after an environment variable that
ends with a colon on Windows.
Solution: Check the correct char for a colon (zeertzjq)
closes: vim/vim#14161
Note: Vim still removes the path-separator at the end, if another path separator
follows directly after it, e.g. on:
```
echo $FOO='/usr/'
echo expand('$FOO/bar') == '/usr/bar'
```
see:
,----[ misc1.c:1630 ]
| // if var[] ends in a path separator and tail[] starts
| // with it, skip a character
| if (after_pathsep(dst, dst + c)
| #if defined(BACKSLASH_IN_FILENAME) || defined(AMIGA)
| && (dst == save_dst || dst[-1] != ':')
| #endif
| && vim_ispathsep(*tail))
| ++tail;
`----
13a014452a
Cherry-pick test_expand.vim change from patch 9.0.1257.
Problem: Crash on exit with EXITFREE and using win_execute().
Solution: Also save and restore tp_topframe. (issue vim/vim#9374)
dab17a0689
Couldn't repro the crash in the test, but I only care about this patch so
switch_win sets topframe properly for win_split_ins in nvim_open_win and
nvim_win_set_config.
Add a test using nvim_win_call and :wincmd, as I couldn't repro the issue via
nvim_open_win or nvim_win_set_config (though it's clear they're affected by this
patch).
That said, at that point, could just use {un}use_tabpage inside switch_win
instead, which also updates tp_curwin (though maybe continue to not set it in
restore_win). That would also fix possible inconsistent behaviour such as:
:call win_execute(w, "let curwin_nr1 = tabpagewinnr(1)")
:let curwin_nr2 = tabpagewinnr(1)
Where it's possible for curwin_nr1 != curwin_nr2 if these commands are run from
the 1st tabpage, but window "w" is in the 2nd (as the 1st tabpage's tp_curwin
may still be invalid). I'll probably PR a fix for that later in Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: nvim_win_set_config does not update the tp_curwin of win's original
tabpage when moving it to another.
Solution: update it if win was the tp_curwin. Add a test.
Problem: illegal memory access when completing with invalid bytes.
Solution: Avoid going over the end of the completion text.
vim/vim@4b28ba3
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem Description: In ex_mode, the default_grid.chars are not allocated, and subsequently,
the w_grid.target in curwin is not allocated to default_grid in update_screen. This leads to
a null pointer crash when the completion function is executed in ex_mode.
Solution: Set full_screen when in ex_mode to ensure that default_grid is allocated.
Problem: :close may cause Nvim to quit if an autocommand triggered when
closing the buffer closes all other non-floating windows and
there are floating windows.
Solution: Correct the check for the only non-floating window.
Problem: nvim_win_set_config does not update statuslines after removing a split.
Solution: call last_status.
Didn't realize this was missing in the original nvim_win_set_config for splits
PR.
As it can only be done for the current tabpage, do it if win_tp == curtab;
enter_tabpage will eventually call last_status anyway when the user enters
another tabpage.
Problem: there are new ways to escape textlock or break the cmdwin in
nvim_win_set_config and nvim_tabpage_set_win.
Solution: fix them. Use win_goto to check it in nvim_tabpage_set_win and use the
try_start/end pattern like with similar functions such as nvim_set_current_win
(which uses the existing msg_list, if set).
Careful not to use `wp->handle` when printing the window ID in the error message
for nvim_tabpage_set_win, as win_goto autocommands may have freed the window.
On a related note, I have a feeling some API functions ought to be checking
curbuf_locked...
Problem: nvim_win_set_config does not handle failure in win_split_ins properly
yet, which can cause all sorts of issues. Also nvim_open_win and
nvim_win_set_config do not set the error message to the one from win_split_ins.
Solution: handle failure by undoing winframe_remove, like in win_splitmove.
Make sure autocommands from switching to the altwin fire within a valid window,
and ensure they don't screw things up. Set the error message to that of
win_split_ins, if any.
Also change a few other small things, including:
- adjust win_append to take a tabpage_T * argument, which is more consistent
with win_remove (and also allows us to undo a call to win_remove).
- allow winframe_restore to restore window positions. Useful if `wp` was in a
different tabpage, as a call to win_comp_pos (which only works for the current
tabpage) after winframe_restore should no longer be needed.
Though enter_tabpage calls win_comp_pos anyway, this has the advantage of
ensuring w_winrow/col remains accurate even before entering the tabpage
(useful for stuff like win_screenpos, if used on a window in another tabpage).
(This change should probably also be PR'd to Vim later, even though it doesn't
use winframe_restore for a `wp` in a different tabpage yet).
Problem: heap-use-after-free in win_splitmove if Enter/Leave
autocommands from win_split_ins immediately closes "wp".
Solution: check that "wp" is valid after win_split_ins.
(Sean Dewar)
abf7030a5c
Problem: win_gotoid() checks for textlock and other things when switching
to a window that is already current (after v9.1.0119)
Solution: return early with success when attempting to switch to curwin
(Sean Dewar)
2a65e73944
Problem: infinite loop in win_update with 'smoothscroll' set when
window width is equal to textoff, or signed integer overflow
if smaller.
Solution: don't revalidate wp->w_skipcol in that case, as no buffer text
is being shown. (Sean Dewar)
02fcae02a9
Test_window_split_no_room changes were already cherry-picked earlier.
Problem: can switch windows while textlocked via f_win_gotoid and
f_win_splitmove (which also allows switching in the cmdwin).
Solution: Check text_or_buf_locked in f_win_splitmove()
(Sean Dewar)
While at it, call text_or_buf_locked() in f_win_gotoid() instead of testing for
cmdwin_type() (which text_buf_locked() does and in addition will also verify
that the buffer is not locked).
f865895c87
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
704966c254
Adjust winframe_restore to account for Nvim's horizontal separators when the
global statusline is in use. Add a test.
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
96cc4aef3d
Partial as WinNewPre has not been ported yet (it currently has problems anyway).
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
0fd44a5ad8
Omit WSP_FORCE_ROOM, as it's not needed for Nvim's autocmd window, which is
floating. Shouldn't be difficult to port later if it's used for anything else.
Make win_splitmove continue working for turning floating windows into splits.
Move the logic for "unfloating" a float to win_split_ins; unlike splits, no
changes to the window layout are needed before calling it, as floats take no
room in the window layout and cannot affect the e_noroom check.
Add missing tp_curwin-fixing logic for turning external windows into splits, and
add a test.
NOTE: there are other issues with the way "tabpage independence" is implemented
for external windows; namely, some things assume that tp_curwin is indeed a
window within that tabpage, and as such, functions like tabpage_winnr and
nvim_tabpage_get_win currently don't always work for external windows (with the
latter aborting!)
Use last_status over frame_add_statusline, as Nvim's last_status already does
this for all windows in the current tabpage. Adjust restore_full_snapshot_rec to
handle this.
This "restore everything" approach is changed in a future commit anyway, so only
ensure it's robust enough to just pass tests.
Keep check_split_disallowed's current doc comment, as it's actually a bit more
accurate here. (I should probably PR Vim to use this one)
Allow f_win_splitmove to move a floating "wp" into a split; Nvim supports this.
Continue to disallow it from moving the autocommand window into a split (funnily
enough, the check wasn't reachable before, as moving a float was disallowed),
but now return -1 in that case (win_splitmove also returns FAIL for this, but
handling it in f_win_splitmove avoids us needing to switch windows first).
Cherry-pick Test_window_split_no_room fix from v9.1.0121.
Update nvim_win_set_config to handle win_split_ins failure in later commits.
Problem: nvim_open_win blocking all win_set_buf autocommands when !enter &&
!noautocmd is too aggressive.
Solution: temporarily block WinEnter/Leave and BufEnter/Leave events when
setting the buffer. Delegate the firing of BufWinEnter back to win_set_buf,
which also has the advantage of keeping the timing consistent (e.g: before the
epilogue in enter_buffer, which also handles restoring the cursor position if
autocommands didn't change it, among other things). Reword the documentation for
noautocmd a bit.
I pondered modifying do_buffer and callees to allow for BufEnter/Leave being
conditionally disabled, but it seems too invasive (and potentially error-prone,
especially if new code paths to BufEnter/Leave are added in the future).
Unfortunately, doing this has the drawback of blocking ALL such events for the
duration, which also means blocking unrelated such events; like if window
switching occurs in a ++nested autocmd fired by win_set_buf. If this turns out
to be a problem in practice, a different solution specialized for nvim_open_win
could be considered. :-)
Problem: currently, for splits, nvim_win_set_config accepts win without any of
split or vertical set, which has little effect and seems error-prone.
Solution: require at least one of split or vertical to also be set for splits.
Also, update nvim_win_set_config docs, as it's no longer limited to just
floating and external windows.
Problem: splitting is disallowed in some cases to prevent the window layout
changes while a window is closing, but it's not checked for.
Solution: check for this, and set the API error message directly.
(Also sneak in a change to tui.c that got lost from #27352; it's a char* buf,
and the memset is assuming one byte each anyway)
Problem: WinNew and win_enter autocommands can delete the target buffer to
switch to, causing a heap-use-after-free.
Solution: store a bufref to the buffer, check it before attempting to switch.
Problem: if switch_win{_noblock} fails to restore the old curwin after WinNew
(e.g: it was closed), wp will become the new curwin, but win_set_buf enter
events would still be blocked if !enter && !noautocmd.
Solution: fire them, as we've actually entered the new window.
Note: there's a problem of switch_win{_noblock} failing to restore the old
curwin, leaving us in wp without triggering WinEnter/WinLeave, but this affects
all callers of switch_win{_noblock} anyways. (It's also not clear how WinLeave
can be called if the old curwin was closed already).
Problem: BufWinEnter is not fired when not entering a new window, even when a
different buffer is specified and buffer-related autocommands are unblocked
(!noautocmd).
Solution: fire it in the context of the new window and buffer. Do not do it if
the buffer is unchanged, like :{s}buffer.
Be wary of autocommands! For example, it's possible for nvim_win_set_config to
be used in an autocommand to move a window to a different tabpage (in contrast,
things like wincmd T actually create a *new* window, so it may not have been
possible before, meaning other parts of Nvim could assume windows can't do
this... I'd be especially cautious of logic that restores curwin and curtab
without checking if curwin is still valid in curtab, if any such logic exists).
Also, bail early from win_set_buf if setting the temp curwin fails; this
shouldn't be possible, as the callers check that wp is valid, but in case that's
not true, win_set_buf will no longer continue setting a buffer for the wrong
window.
Note that pum_create_float_preview also uses win_set_buf, but from a glance,
doesn't look like it properly checks for autocmds screwing things up (win_enter,
nvim_create_buf...). I haven't addressed that here.
Also adds some test coverage for nvim_open_win autocommands.
Closes#27121.
Problem: win_set_config should have the observable effect of moving an existing
window to another place, but instead fires autocommands as if a new window was
created and entered (and does not fire autocommands reflecting a "return" to the
original window).
Solution: do not fire win_enter-related autocommands when splitting the window,
but continue to fire them when entering the window that fills the new space when
moving a window to a different tabpage, as the new curwin changes.
Also, remove "++once" from the WinEnter autocmd in the other test, as omitting
it also crashed Nvim before this fix.
Problem: win_enter autocommands can close new_curwin, crashing if it was the
last window in its tabpage after removing win, or can close parent, crashing
when attempting to split it later.
Solution: remove win first, check that parent is valid after win_enter.
NOTE: This isn't actually quite right, as this means win is not in the window
list or even has a frame when triggering enter autocommands (so it's not
considered valid in the tabpage). This is addressed in later commits.
`_FORTIFY_SOURCE` on Ubuntu caught this, resulting in:
[OLDTEST] Running test_rename
Failed: test_rename :: Nvim exited with non-zero code
Job exited with code 134
Screen (23 lines)
================================================================================
"test_rename.vim" "test_rename.vim" 120L, 3623B
Executing Test_rename_copy()
Executing Test_rename_dir_to_dir()
Executing Test_rename_fails()
Error detected while processing command line..script /<<BUILDDIR>>/neovim-0.9.5/test/old/testdir/runtest.vim[437]..function RunTheTest[44]..Test_rename_fails:
line 17:
E730: using List as a String
line 18:
E976: using Blob as a String
Executing Test_rename_file_ignore_case()*** buffer overflow detected ***: terminated
`snprintf`'s second parameter should be no greater than the number of
remaining bytes in the allocated object. We can see that this was off
by one, because in the simple case where `tail == tempname` (for a file
in the current directory), `rename_with_tmp` was passing `MAXPATHL + 2`
for an object allocated with a size of only `MAXPATHL + 1`.
Introduced in 5f1a153831.
Just some basic spring cleaning.
In the distant past, not all UI:s where remote UI:s. They still aren't,
but both of the "UI" and "UIData" structs are now only for remote UI:s.
Thus join them as "RemoteUI".
Problem: Various warnings from clang on MS-Windows.
Solution: Avoid the warnings. (Yegappan Lakshmanan, closesvim/vim#10553)
a34b4460c2
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
On exit, pty_process_close() may be called after pty_process_finish1()
but before start_wait_eof_timer(), in which case the timer shouldn't be
started because pty_process_close() has already closed it.
Problem: 'shortmess' "F" flag doesn't work properly with 'autoread'
(after 9.1.0154)
Solution: Hide the file info message instead of the warning dialog
(zeertzjq)
closes: vim/vim#14159closes: vim/vim#141588a01744c56
Problem: Duplicate assignment in f_getregion().
Solution: Remove the duplicate assignment. Also improve getregion()
docs wording and fix an unrelated typo (zeertzjq)
closes: vim/vim#141540df8f93bda
Before, we needed to always pack an entire msgpack_rpc Object to
a continous memory buffer before sending it out to a channel.
But this is generally wasteful. it is better to just flush
whatever is in the buffer and then continue packing to a new buffer.
This is also done for the UI event packer where there are some extra logic
to "finish" of an existing batch of nevents/ncalls. This doesn't really
stop us from flushing the buffer, just that we need to update the state
machine accordingly so the next call to prepare_call() always will
start with a new event (even though the buffer might contain overflow
data from a large event).
Problem: can only call getregion() for current buffer
Solution: Allow to retrieve selections from different buffers
(Shougo Matsushita)
closes: vim/vim#1413184bf6e658d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: null pointer member access in ui_client_start_server if
channel_job_start returns NULL.
Solution: check for it, return 0 in that case (which is already used to indicate
failure and is handled by main).
Happened on Linux when trying to run Nvim in an old gdbserver instance after having
rebuilt Nvim since. This gave E903 (the nvim binary was deleted, so " (deleted)" appears
as a suffix in the `v:progpath`, making it invalid), then ASAN complains due to the NPD;
instead it now then prints "Failed to start Nvim server!", as expected.
Problem: Text is not redrawn with 'relativenumber' when only the 'statuscolumn' is redrawn after inserted lines.
Solution: Force a full redraw if statuscolumn width changed.
Problem: v:echospace wrong after setting invalid value to 'showcmdloc'.
Solution: Only call comp_col() if value is valid.
(zeertzjq)
closes: vim/vim#14119c27fcf4857
runtime(doc): some improvements to getregion() docs (vim/vim#14122)
- Mention the default selection behavior
- Remove useless sentence
- Correct description about space padding
87410ab3f5
Problem: Floats are arbitrarily positioned at 1 row above screen size.
Solution: Position at 1 row above 'cmdheight', only if window is hidden behind the message area.
Problem: the amount of available space (v:echospace) on the command
line is not correct when showcmdloc is drawn into the
statusline or tabline.
Solution: only add SHOWCMD_COLS to the shown command column when
'showcmdloc' is set to last (Sam-programs)
closes: vim/vim#14108062141b1a7
Co-authored-by: Sam-programs <130783534+Sam-programs@users.noreply.github.com>
Problem: [security]: autocmd cause use-after-free in set_curbuf()
(kawarimidoll)
Solution: check side-effect of BufLeave autocommand, when the number
of windows changed, close windows containing buffers that will
be wiped, if curbuf changed unexpectedly make sure b_nwindows
is decremented otherwise it cannot be wiped
set_curbuf() already makes some efforts to ensure the BufLeave
autocommands do not cause issues. However there are still 2 issues
that are not taken care of:
1) If a BufLeave autocommand opens a new window containing the same
buffer as that is going got be closed in close_buffer() a bit later,
we suddenly have another window open, containing a free'd buffer. So we
must check if the number of windows changed and if it does (and the
current buffer is going to be wiped (according to the 'bufhidden'
setting), let's immediately close all windows containing the current
buffer using close_windows()
2) If a BufLeave autocommand changes our current buffer (displays it in
the current window), buf->b_nwindow will be incremented. As part of
set_curbuf() we will however enter another buffer soon, which means, the
newly created curbuf will have b_nwindows still have set, even so the
buffer is no longer displayed in a window. This causes later problems,
because it will no longer be possible to wipe such a buffer. So just
before entering the final buffer, check if the curbuf changed when
calling the BufLeave autocommand and if it does (and curbuf is still
valid), decrement curbuf->b_nwindows.
Both issues can be verified using the provided test (however the second
issue only because such an impacted buffer won't be wiped, causing
futher issues in later tests).
fixes: vim/vim#13839closes: vim/vim#1410455f8bba73b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: getregion() can be improved (after v9.1.120)
Solution: change getregion() implementation to use pos as lists and
one optional {opt} dictionary (Shougo Matsushita)
Note: The following is a breaking change!
Currently, the getregion() function (included as of patch v9.1.120) takes
3 arguments: the first 2 arguments are strings, describing a position,
arg3 is the type string.
However, that is slightly inflexible, there is no way to specify
additional arguments. So let's instead change the function signature to:
getregion(pos1, pos2 [, {Dict}]) where both pos1 and pos2 are lists.
This is slightly cleaner, and gives us the flexibility to specify
additional arguments as key/value pairs to the optional Dict arg.
Now it supports the "type" key to specify the selection type
(characterwise, blockwise or linewise) and now in addition one can also
define the selection type, independently of what the 'selection' option
actually is.
Technically, this is a breaking change, but since the getregion()
Vimscript function is still quite new, this should be fine.
closes: vim/vim#1409019b718828d
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: Put in Visual mode wrong if it replaces fold marker.
Solution: Temporarily disable folding during put in Visual mode.
(zeertzjq)
fixes: vim/vim#14097closes: vim/vim#141004e141c66b9
Then we can just load metadata in C as a single msgpack blob. Which also
can be used directly as binarly data, instead of first unpacking all the
functions and ui_events metadata to immediately pack it again, which was
a bit of a silly walk (and one extra usecase of `msgpack_rpc_from_object`
which will get yak shaved in the next PR)
Problem: The cursor screen row was incorrectly being calculated when the
cursor follows a 1 character text_align 'below' virtual text line,
resulting in the cursor being shown on the wrong line.
This was caused by a cell size of 2 instead of 1 being used for the EOL
character, which propagated to the calculation of space for putting the
'below' virtual text on its own line. (rickhowe)
Solution: Fix the size used for the EOL character in calculating the
cursor's screen position (Dylan Thacker-Smith)
fixes: vim/vim#11959
related: vim/vim#12028closes: vim/vim#14096da0c9137d1
Co-authored-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
Problem:
The documentation flow (`gen_vimdoc.py`) has several issues:
- it's not very versatile
- depends on doxygen
- doesn't work well with Lua code as it requires an awkward filter script to convert it into pseudo-C.
- The intermediate XML files and filters makes it too much like a rube goldberg machine.
Solution:
Re-implement the flow using Lua, LPEG and treesitter.
- `gen_vimdoc.py` is now replaced with `gen_vimdoc.lua` and replicates a portion of the logic.
- `lua2dox.lua` is gone!
- No more XML files.
- Doxygen is now longer used and instead we now use:
- LPEG for comment parsing (see `scripts/luacats_grammar.lua` and `scripts/cdoc_grammar.lua`).
- LPEG for C parsing (see `scripts/cdoc_parser.lua`)
- Lua patterns for Lua parsing (see `scripts/luacats_parser.lua`).
- Treesitter for Markdown parsing (see `scripts/text_utils.lua`).
- The generated `runtime/doc/*.mpack` files have been removed.
- `scripts/gen_eval_files.lua` now instead uses `scripts/cdoc_parser.lua` directly.
- Text wrapping is implemented in `scripts/text_utils.lua` and appears to produce more consistent results (the main contributer to the diff of this change).
Problems:
- Illegal bytes after valid UTF-8 char cause utf_cp_*_off() to fail.
- When stream isn't NUL-terminated, utf_cp_*_off() may go over the end.
Solution: Don't go over end of the char of end of the string.
writer is only ever used with FileDescriptor. We already have separate
code paths for serializing shada data into memory, see
shada_encode_regs() and friends
Functions like file_open_new() and file_open_fd_new() which just is a
wrapper around the real functions but with an extra xmalloc/xfree around
is an anti-pattern. If the caller really needs to allocate a
FileDescriptor as a heap object, it can do that directly.
FileDescriptor by itself is pretty much a pointer, or rather two:
the OS fd index and a pointer to a buffer. So most of the time an extra
pointer layer is just wasteful.
In the case of scriptin[curscript] in getchar.c, curscript used
to mean in practice:
N+1 open scripts when curscript>0
zero or one open scripts when curscript==0
Which means scriptin[0] had to be compared to NULL to disambiguate the
curscript=0 case.
Instead, use curscript==-1 to mean that are no script,
then all pointer comparisons dissappear and we can just use an array of
structs without extra pointers.
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
fixesvim/vim#13894closes: vim/vim#140820dc0bff000
Cherry-pick test_cmdline.vim from patch 9.1.0019 as it already passes.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: using "C" and 've=all' set, doesn't include composing chars
when changing a line, keeps the composing chars for whatever
is typed afterwards.
Solution: Use mb_head_off() and mb_ptr2len() instead of mb_tail_off().
(zeertzjq)
closes: vim/vim#14083048761bcd4
Problem: Virtual text with text_wrap 'wrap' was effectively being
truncated by a break conditional on the EOL list character
being added to the screen line. (BigPeet)
Solution: Remove the condition that was leading to the early break and
instead fix a similar but incorrectly written outer condition
that checks if there is more to add at the end of the screen
line. (Dylan Thacker-Smith)
Also, related:
- update comment in win_line()
- remove no longer necessary at_end_str variable in win_line()
fixes: vim/vim#12725closes: vim/vim#14079f548ae7b63
Co-authored-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com>
runtime(doc) Update help text for matchbufline() and matchstrlist()
closes: vim/vim#14080a35235e824
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
os_getenv("FOO") caches the result when $FOO is set to something
non-empty. However, when $FOO was not set, every new call to
os_getenv("FOO") would allocate a temporary scratch buffer to
immediately throw away.
This has an huge impact e.g. on logging which depends on potentially
non-set env vars.
Problem: Naming a non-pointer variable "oap" is strange.
Solution: Rename it to "oa". Also prevent using freed memory in case of
memory allocation failure. (zeertzjq)
closes: vim/vim#140755e3674b42d
Problem: Internal error when passing mark in another buffer to
getregion().
Solution: Don't allow marks in another buffer (zeertzjq)
closes: vim/vim#14076
Internal error when passing mark in another buffer to getregion()
421b597470
Problem: hard to get visual region using Vim script
Solution: Add getregion() Vim script function
(Shougo Matsushita, Jakub Łuczyński)
closes: vim/vim#13998closes: vim/vim#115793f905ab3c4
Cherry-pick changes from patch 9.1.0122, with :echom instead of :echow.
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Co-authored-by: Jakub Łuczyński <doubleloop@o2.pl>
To align the output of `nvim_get_hl` with its documentation -- which
points to `nvim_set_hl`, remove mentions of the keys `foreground`,
`background` and `special`.
The long keys are are still supported (via fallback checks inside
`dict2hlattrs`), but the `fg`, `bg` and `sp` keys are preferenced.
As only a few API functions make use of explicit freeing of the return
value, make it opt-in instead. The arena is always present under the
hood, so `Arena *arena` arg now doesn't mean anything other than getting
access to this arena. Also it is in principle possible to return an
allocated value while still using the arena as scratch space for other
stuff (unlikely, but there no reason to not allow it).
The way ml_replace_buf is implemented makes it unfriendly for
being used in a loop: every call allocates a scratch buffer for putting
the line into the "dirty" state. This then immediately needs to be freed
as the next ml_replace_buf and/or ml_append_buf call will flush that buffer.
It's better to later pay the price of allocating the scratch buffer only if
the line is being immediately edited (likely when using the API to only
change one line) with an extra memcpy, than allocating that buffer
multiple times every time the API is called.
Of course, a separate xmalloc/xfree cycle for each time the dirty line
changes is unwanted to begin with. But fixing that is a later refactor.
