Problem: can't move to last non-blank char
Solution: Make g<end> behave like that
Make it possible to move to last non-blank char on a line
We can distinguish between g0 and g^ to move to the very first character
and the first non-blank char.
And while we can move to the last screen char, we cannot go to the last
non-blank screen char.
Since I think g$ is the more widely used and known movement command (and
g<end> is synonymous to it) change the behaviour of g<end> to move to
last non-screen char instead and don't have this be the same command as
the g$ command anymore.
If you want to keep the old behaviour, you can use:
```
nnoremap g<end> g$
```
Add a test to verify the behaviour.
closes: vim/vim#12593b5f6fe9ca2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Missing test coverage for blockwise Visual highlight with
virtual that starts with a double-width char.
Solution: Add a new virtual text to the test. Some other small fixes.
closes: vim/vim#12835fc3058495d
Problem: Wrong curswant when clicking and the second cell of a
double-width char.
Solution: Don't copy virtcol of the first char to the second one.
closes: vim/vim#128429994160bfe
Problem: reverse() on string doesn't work in compiled function.
Solution: Accept string in argument type check. (Yegappan Lakshmanan,
closesvim/vim#12377)
f9dc278946
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: reverse() does not work for a String.
Solution: Implement reverse() for a String. (Yegappan Lakshmanan,
closesvim/vim#12179)
03ff1c2dde
vim-patch:9.0.1738: Duplicate code to reverse a string
Problem: Duplicate code to reverse a string
Solution: Move reverse_text() to strings.c and remove string_reverse().
closes: vim/vim#128474dd266cb66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Wrong cursor position when clicking after concealed text
with 'virtualedit'.
Solution: Store virtual columns in ScreenCols[] instead of text
columns, and always use coladvance() when clicking.
This also fixes incorrect curswant when clicking on a TAB, so now
Test_normal_click_on_ctrl_char() asserts the same results as the ones
before patch 9.0.0048.
closes: vim/vim#12808e500ae8e29
Remove the mouse_adjust_click() function.
There is a difference in behavior with the old mouse_adjust_click()
approach: when clicking on the character immediately after concealed
text that is completely hidden, cursor is put on the clicked character
rather than at the start of the concealed text. The new behavior is
better, but it causes unnecessary scrolling in a functional test (which
is an existing issue unrelated to these patches), so adjust the test.
Now fully merged:
vim-patch:9.0.0177: cursor position wrong with 'virtualedit' and mouse click
Problem: cursor position wrong when clicking on an unprintable char
Solution: Don't update prev_ptr when wlv.n_extra is not zero.
closes: vim/vim#12664b25dbb3f9b
Tests only. Code superseded by patch 9.0.1725.
Problem: Cursor in wrong column with mouse click after concealed text.
Solution: Store the text column when drawing text.
b90818867c
Tests only. Code changes moved to the port of patch 9.0.1725.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: blockwise Visual highlight not working with virtual text
Solution: Reset the correct variable at the end of virtual selection and
Check for double-width char inside virtual text.
closes: vim/vim#126066e940d9a1d
Need to remove area_active and use wlv.fromcol and wlv.tocol directly.
Problem: A double-width char in a floating window causes an extra
space to be drawn to the left of its boundary.
Solution: Only reset skipstart at the first column.
Fix#24775
Problem: screenpos() wrong result with w_skipcol and cpoptions+=n
Solution: Use adjust_plines_for_skipcol() instead of subtracting
w_skipcol.
closes: vim/vim#12625bfe377b8f2
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: vim/vim#12633825cf813fa
Problem: incorrect heights in win_size_restore()
Solution: avoid restoring incorrect heights in win_size_restore()
876f5fb570
I already merged this prior, so just replace the new test with the old one,
but add a test case for the global statusline.
Problem: Fix regression in {func} argument of reduce()
Solution: pass function name as string again
Before patch 9.0.0548, passing a string as {func} argument of reduce()
is treated as a function name, but after patch 9.0.0548 it is treated as
an expression instead, which is useless as reduce() doesn't set any v:
variables. This PR restores the behavior of {func} before that patch.
Also correct an emsg() call, as e_string_list_or_blob_required doesn't
contain format specifiers.
closes: vim/vim#12824ad0c442f1f
Problem: wrong error messages when passing wrong types to count()
Solution: fix it
This fixes two problems:
1. When passing wrong type to {ic} argument of count(), two error
messages are given, the second of which is misleading.
2. When passing wrong type to {comp} argument of count(), the error
message doesn't mention that {comp} may be a String.
closes: vim/vim#128254f389e7c0f
Problem: Crash when collection is modified when using filter().
Solution: Lock the list/dict/blob. (Ernie Rael, closesvim/vim#12183)
e6d40dcdc7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: reduce() with a compiled lambda could be faster.
Solution: Call eval_expr_typval() instead of call_func() directly.
f1c60d4bf1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Error message for wrong argument type is not specific.
Solution: Include more information in the error. (Yegappan Lakshmanan,
closesvim/vim#11037)
8deb2b30c7
Cherry-pick test_listdict.vim changes from patch 8.2.4809.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Accepting one and zero for the second sort() argument is strange.
Solution: Disallow using one and zero in Vim9 script.
2007dd49f5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Functions implementing reduce and map are too long.
Solution: Use a function for each type of value. Add a few more test cases
and add to the help. (Yegappan Lakshmanan, closesvim/vim#9370)
389b72196e
Partial port as this doesn't include handling for non-materialized List.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Cannot use reduce() for a string.
Solution: Make reduce() work with a string. (Naruhiko Nishino, closesvim/vim#9366)
0ccb5842f5
Omit tv_get_first_char() as it doesn't really save much code.
Co-authored-by: rbtnn <naru123456789@gmail.com>
Problem: Some lines of code not covered by tests.
Solution: Add a few more test cases. (Dominique Pellé, closesvim/vim#9453)
8bfa0eb863
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Cannot use a script-local function for 'foldtext'.
Solution: Expand "s:" and "<SID>". (Yegappan Lakshmanan, closesvim/vim#9411)
27708e6c7b
Cherry-pick test_filter_map.vim change from patch 8.2.3871.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Leaking memory in map() and filter(), cannot use a string argument
in Vim9 script.
Solution: Fix the leak, adjust the argument check, also run the tests as
Vim9 script. (Yegappan Lakshmanan, closesvim/vim#9354)
2d877599ee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot filter or map characters in a string.
Solution: Make filter() and map() work on a string. (Naruhiko Nishino,
closesvim/vim#9327)
c479ce032f
Co-authored-by: rbtnn <naru123456789@gmail.com>
Problem: Error for const argument to mapnew().
Solution: Don't give an error. (closesvim/vim#7400)
57cf4973a2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests run with Vim9.
Solution: Run a few more tests in Vim9 script and :def function. Fix
islocked(). Fix error for locking local variable.
bd77aa9274
Omit GLV_NO_DECL: Vim9 script only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests run with Vim9.
Solution: Run a few more tests in Vim9 script and :def function.
3e9c0b9608
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: dict-completion does not respect region
Solution: respect selected region in dict completion
Set do_region to zero as we don't want a complete dump of the matching
words, we want the code to filter them according to the user's selected
region.
closes: vim/vim#12792closes: vim/vim#7025e98fb643ec
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: virtcol2col returns last byte of a multi-byte char
Solution: Make it return the first byte for a multi-byte char
closes: vim/vim#12786closes: vim/vim#12799b209b86e66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: getcompletion() "cmdline" fails after :autocmd
Solution: Use set_cmd_context() instead of set_one_cmd_context().
closes: vim/vim#12804e4c79d3615
Problem: Cannot use positional arguments for printf()
Solution: Support positional arguments in string formatting
closes: vim/vim#121400c6181fec4
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: getcompletion() failes for user-defined commands
Solution: set context for completion function
closes: vim/vim#12681closes: vim/vim#126808ef1fbc0c3
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: incsearch test not sufficient (after 9.0.1691)
Solution: add an additional test
73b8209266
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem:
Treesitter highlighting is slow for large files with lots of injections.
Solution:
Only parse injections we are going to render during a redraw cycle.
---
- `LanguageTree:parse()` will no longer parse injections by default and
now requires an explicit range argument to be passed.
- `TSHighlighter` now parses injections incrementally during on_win
callbacks for the line range being rendered.
- Plugins which require certain injections to be parsed must run
`parser:parse({ start_row, end_row })` before using the tree.
Problem: Temporarily changing current window in a script causes
CursorMoved to be triggerd.
Solution: Don't trigger CursorMoved if neither curwin nor cursor
changed between two checks.
Problem: cannot store custom data in quickfix list
Solution: add `user_data` field for the quickfix list
closes: vim/vim#11818ca6ac99077
Co-authored-by: Tom Praschan <13141438+tom-anders@users.noreply.github.com>
Problem: Ctrl-Q not handled like Ctrl-V in replace mode
Solution: Handle Ctrl-Q like Ctrl-V
closes: vim/vim#12686closes: vim/vim#126842d63e4b3cc
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: mapset() not properly handling script ID
Solution: replace_termcodes() may accept a script ID
closes: vim/vim#12699closes: vim/vim#126977e0bae024d
Problem: undotree() only works for the current buffer
Solution: Add an optional "buffer number" parameter to undotree(). If
omitted, use the current buffer for backwards compatibility.
closes: vim/vim#4001closes: vim/vim#122925fee111149
Co-authored-by: Devin J. Pohly <djpohly@gmail.com>
* feat(treesitter): add injection language fallback
Problem: injection languages are often specified via aliases (e.g.,
filetype or in upper case), requiring custom directives.
Solution: include lookup logic (try as parser name, then filetype, then
lowercase) in LanguageTree itself and remove `#inject-language`
directive.
Co-authored-by: Lewis Russell <me@lewisr.dev>
The terminal buffer closes automatically when using `:terminal` and the
command exits without an error. This messes up some tests that expect
the terminal buffer to still be open. We can force the buffer not to
close by passing an argument to `:terminal`. This can be anything, since
the shell-test stub simply prints whatever argument it's given.
This is a collection of various PRs from github that all require a minor
patch number:
1) https://github.com/vim/vim/pull/12612
Do not conflate dictionary key with end of block
2) https://github.com/vim/vim/pull/12729:
When saving and restoring 'undolevels', the constructs `&undolevels` and
`:set undolevels` are problematic.
The construct `&undolevels` reads an unpredictable value; it will be the
local option value (if one has been set), or the global option value
(otherwise), making it unsuitable for saving a value for later
restoration.
Similarly, if a local option value has been set for 'undolevels',
temporarily modifying the option via `:set undolevels` changes the local
value as well as the global value, requiring extra work to restore both
values.
Saving and restoring the option value in one step via the construct
`:let &undolevels = &undolevels` appears to make no changes to the
'undolevels' option, but if a local option has been set to a different
value than the global option, it has the unintended effect of changing
the global 'undolevels' value to the local value.
Update the documentation to explain these issues and recommend explicit
use of global and local option values when saving and restoring. Update
some unit tests to use `g:undolevels`.
3) https://github.com/vim/vim/pull/12702:
Problem: Pip requirements files are not recognized.
Solution: Add a pattern to match pip requirements files.
4) https://github.com/vim/vim/pull/12688:
Add indent file and tests for ABB Rapid
5) https://github.com/vim/vim/pull/12668:
Use Lua 5.1 numeric escapes in tests and add to CI
Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings. Lua
5.1 only supports decimal escapes:
> A character in a string can also be specified by its numerical value
> using the escape sequence \ddd, where ddd is a sequence of up to three
> decimal digits. (Note that if a numerical escape is to be followed by a
> digit, it must be expressed using exactly three digits.) Strings in Lua
> can contain any 8-bit value, including embedded zeros, which can be
> specified as '\0'.
To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
run with Lua 5.1 as well as Lua 5.4
6) https://github.com/vim/vim/pull/12631:
Add hurl filetype detection
7) https://github.com/vim/vim/pull/12573:
Problem: Files for haskell persistent library are not recognized
Solution: Add pattern persistentmodels for haskell persistent library
closes: vim/vim#12612closes: vim/vim#12729closes: vim/vim#12702closes: vim/vim#12688closes: vim/vim#12668closes: vim/vim#12631closes: vim/vim#12573
Already ported but wasn't marked: vim-patch:ad34abee2583
6efb198033
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
If an iterator pipeline stage returns nil as its first return value, the
other return values are ignored and it is treated as if that stage
returned only nil (the semantics of returning nil are different between
different stages). This is consistent with how for loops work in Lua
more generally, where the for loop breaks when the first return value
from the function iterator is nil (see :h for-in for details).
Add filetype detection for eyaml files (vim/vim#12659)
https://github.com/voxpupuli/hiera-eyaml/ uses and produces the eyaml
format, which is simply yaml with some encrypted values.
It's convenient to edit the file without decrypting when not touching
encrypted values (or when you don't have access to the decryption key),
which is why vim should treat those files as yaml files.
b69b9d5e17
Co-authored-by: Max Gautier <mg@max.gautier.name>
* vim-patch:44ff25d5243b
PyPA manifest files are not recognized (vim/vim#12707)
Problem: PyPA manifest files are not recognized.
Solution: Add a pattern to match PyPA manifest files.
44ff25d524
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Currently (as of nvim 0.9), the behavior of boolean params in
vim.api lua wrappers is inconsistent for optional parameters
(part of an `opts` dict) compared to positional parameters.
This was inadvertently changed in #24524 . While cleaning up this
inconsistency is something we might want eventually, it needs
to be discussed separately and the impact of existing code considered.
Problem: luals returns stricter diagnostics with bundled luarc.json
Solution: Improve some function and type annotations:
* use recognized uv.* types
* disable diagnostic for global `vim` in shared.lua
* docs: don't start comment lines with taglink (otherwise LuaLS will interpret it as a type)
* add type alias for lpeg pattern
* fix return annotation for `vim.secure.trust`
* rename local Range object in vim.version (shadows `Range` in vim.treesitter)
* fix some "missing fields" warnings
* add missing required fields for test functions in eval.lua
* rename lsp meta files for consistency
Problem: Tests may leave leftover files around
Solution: Clean up tests and remove files
There were a few failures in 'linux (huge, gcc, testgui, true, true)'
e.g. here: https://github.com/vim/vim/actions/runs/5497376153/jobs/10018060156
,----
| Error detected while processing command line..script /home/runner/work/vim/vim/src/testdir/runtest.vim[585]..function RunTheTest[54]..Test_lvimgrep_crash[16]..TestTimeout[12]..VimLeavePre Autocommands for "*"..function EarlyExit[7]..FinishTesting:
| line 70:
| E445: Other window contains changes
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txt
| E937: Attempt to delete a buffer that is in use: Xtest_stable_xxd.txtmalloc(): unsorted double linked list corrupted
`----
Which is puzzling, because the Xtest_stable_xxd file should have been
long gone after test_crypt.vim is run (and definitely no longer be
staying around in test_quickfix.vim).
So try to clean up properly after a test script is run, just in case any
X<file> is still around. During testing, a found a few leftover files,
which I also fixed in the relevant test-file.
Unfortunately, the test workflow 'linux (huge, gcc, testgui, true,
true)' now seems to fail with 'E1230: Encryption: sodium_mlock()' in
test_crypt.vim. Hopefully this is only temporary.
84bc00e9b5
Co-authored-by: Christian Brabandt <cb@256bit.org>
When an injection has not set include children, make sure not to add
the injection if no ranges are determined.
This could happen when there is an injection with a child that has the
same range as itself. e.g. consider this Makefile snippet
```make
foo:
$(VAR)
```
Line 2 has an injection for bash and a make variable reference. If
include-children isn't set (default), then there is no range on line 2
to inject since the variable reference needs to be excluded.
This caused the language tree to return an empty range, which the parser
now interprets to mean the full buffer. This caused makefiles to have
completely broken highlighting.
Problem: Blade files are not recognized.
Solution: Add a pattern for Blade files. (closesvim/vim#12650)
ad34abee25
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot break undo by setting 'undolevels' to itself in
'inccommand' preview callback.
Solution: Don't set an invalid 'undolevels' value.
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
PR #23689 assumes `client.config.capabilities.workspace.didChangeWatchedFiles`
exists when checking `dynamicRegistration`, but thats's true only if it was
passed to `vim.lsp.start{_client}`.
This caused #23806 (still an issue in v0.9.1; needs manual backport), but #23681
fixed it by defaulting `config.capabilities` to `make_client_capabilities` if
not passed to `vim.lsp.start{_client}`.
However, the bug resurfaces on HEAD if you provide a non-nil `capabilities` to
`vim.lsp.start{_client}` with missing fields (e.g: not made via
`make_client_capabilities`).
From what I see, the spec says such missing fields should be interpreted as an
absence of the capability (including those indicated by missing sub-fields):
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#clientCapabilities
Also, suggest `vim.empty_dict()` for an empty dict in
`:h vim.lsp.start_client()` (`{[vim.type_idx]=vim.types.dictionary}`
no longer works anyway, probably since the cjson switch).
Problem: cache paths are derived by replacing each reserved/filesystem-
path-sensitive char with a `%` char in the original path. With this
method, two different files at two different paths (each containing `%`
chars) can erroneously resolve to the very same cache path in certain
edge-cases.
Solution: derive cache paths by url-encoding the original (path) instead
using `vim.uri_encode()` with `"rfc2396"`. Increment `Loader.VERSION` to
denote this change.
Problem: 'inccommand' doesn't restore 'undolevels' properly for a
buffer shown in multiple windows.
Solution: Don't save information of a buffer twice.
Currently it only skips if `Rows` changed, but it's possible for the height of
the usable area for windows to change (e.g: via `&ch`, `&stal` or `&ls`), which
can cause the value of `&cmdheight` to change when the sizes are restored.
This is a Vim bug, so I've submitted a PR there too. No telling when it'll be
merged though, given the current lack of activity there.
`ROWS_AVAIL` is convenient here, but also subtracts the `global_stl_height()`.
Not ideal, as we also care about the height of the last statusline for other
values of `&ls`. Meh.
Introduce `last_stl_height` for getting the height of the last statusline and
use it in `win_size_save/restore` and `last_status` (means
`last_status_rec`'s `statusline` argument will now be true if `&ls` is 3,
but that does not change the behaviour).
Also corrects the logic in `comp_col` to not assume there's a last statusline
if `&ls` is 1 and the last window is floating.
This aligns its behaviour better with `nvim_win_close`.
Note that `:hide` is actually incapable of closing the cmdwin, unlike `:close`
and `:quit`, so this is a bit of a difference in behaviour.
Disallow closing the previous window from `nvim_win_close`, as this will cause
issues.
Again, no telling how safe this is. It also requires exposing old_curwin. :/
Also note that it's possible for the `&cmdheight` to change if, for example,
there are 2 tabpages and `nvim_win_close` is used to close the last window in
the other tabpage while `&stal` is 1. This is addressed in a later commit.
Problem: As discussed on Matrix, there was some interest in having
`nvim_open_win` again be able to open floats in the cmdwin (e.g: displaying a
hover doc related to what's in the cmdwin). After #23228, this was disallowed.
Solution: Allow `nvim_open_win` in the cmdwin as long as `!enter` and
`buffer != curbuf` (the former can cause all sorts of issues, and the latter
can crash Nvim after closing cmdwin). Also allow `nvim_win_set_buf` in a similar
fashion.
Note that we're not *entirely* sure if this is 100% safe (cmdwin is a
global-state-using-main-loop-calling beast), but this seems to work OK..?
Also:
- Check the buffer argument of `nvim_open_win` earlier, and abort if it's
invalid (it used to still open a window in this case).
- Untranslate `e_cmdwin` errors in the API (other errors in the API are not
translated: although not detailed in the API contract yet, errors are
supposed to be stable).
Problem:
The cmdpreview saved undo nodes on cmdpreview_prepare() from ex_getln.c may
become invalid (free) if the preview function makes undo operations, causing
heap-use-after-free errors.
Solution:
Save the buffer undo list on cmdpreview_prepare)_ and start a new empty one. On
cmdpreview_restore_state(), undo all the entries in the new undo list and
restore the original one. With this approach, the preview function will be
allowed to undo only its own changes.
Fix#20036Fix#20248
Problem: No test for bad use of spaces in help files.
Solution: Add checks for use of spaces in help files. Ignore intentional
spaces. (Hirohito Higashi, closesvim/vim#11952)
d950984489
Cherry-pick changes from patch 9.0.1604.
Co-authored-by: h-east <h.east.727@gmail.com>
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot drag a vertical separator to the right of a window
whose 'statuscolumn' is wider than itself.
Solution: Never treat a click on a vertical separator as a click on
'statuscolumn'.
Avoid consecutive RPC requests involving :startinsert or :stopinsert,
because consecutive RPC requests may be processed together, before the
:startinsert or :stopinsert takes effect.
Also change some feed_command() to command() to make tests faster.
Problem:
On Windows, `rundll32` exits zero (success) even when given
a non-existent file.
Solution:
Mock vim.system() on Windows to force a "failure" case.
Previously, when using foldmethod=indent, inserting an unindented line
would inadvertently open closed folds below it.
As a performance improvement, folds were only updated once, across all
lines, after Insert mode was exited.
Now, the performance improvement is no longer being used when
foldmethod=indent, so folds are updated multiple times during Insert
mode, but only across the lines that are changing, which preserves the
folds (and their open/close states) instead of recreating them.
Problem:
helpers.tmpname() may create a local file, depending on circumstances.
Solution:
Only use helpers.tmpname() for its parent directory (the "temp root").
Use fs_mkdtemp() to actually get a unique name.
Problem:
Bash language server returns "hover" markdown content that starts with
a code fence and info string of `man` preceded by whitespace, which Nvim
does not render properly.
See 0ee73c53ce/server/src/server.ts (L821C15-L821C15)
```typescript
function getMarkdownContent(documentation: string, language?: string): LSP.MarkupContent {
return {
value: language
? // eslint-disable-next-line prefer-template
['``` ' + language, documentation, '```'].join('\n')
: documentation,
kind: LSP.MarkupKind.Markdown,
}
}
```
For example,
```
``` man
NAME
git - the stupid content tracker
```
```
If I remove the white space, then it is properly formatted.
```
```man instead of ``` man
```
Per CommonMark Spec https://spec.commonmark.org/0.30/#info-string
whitespace is allowed before and after the `info string` which
identifies the language in a codeblock.
> The line with the opening code fence may optionally contain some text
> following the code fence; this is trimmed of leading and trailing
> spaces or tabs and called the [info
> string](https://spec.commonmark.org/0.30/#info-string). If the [info
> string](https://spec.commonmark.org/0.30/#info-string) comes after
> a backtick fence, it may not contain any backtick characters. (The
> reason for this restriction is that otherwise some inline code would
> be incorrectly interpreted as the beginning of a fenced code block.)
Solution:
Adjust stylize_markdown() to allow whitespace before codeblock info.
* perf(rtp): reduce rtp scans
Problem:
Scanning the filesystem is expensive and particularly affects
startuptime.
Solution:
Reduce the amount of redundant directory scans by relying less on glob
patterns and handle vim and lua sourcing lower down.
Problem: Cursor is not after inline virtual text with left gravity
when inserting after the end of the line.
Solution: Add width of inline virtual text with left gravity to cursor
virtcol in Insert mode even if on a NUL.
Problem: Bashslashes added as regexp in runtime completion may be
treated as path separator with some 'isfname' value.
Solution: Make curly braces work for runtime completion and use it.
* feat(lua): allow vim.wo to be double indexed
Problem: `vim.wo` does not implement `setlocal`
Solution: Allow `vim.wo` to be double indexed
Co-authored-by: Christian Clason <c.clason@uni-graz.at>
Problem: When using treesitter foldexpr,
* :diffput/get open diff folds, and
* folds are not updated in other windows that contain the updated
buffer.
Solution: Update folds in all windows that contain the updated buffer
and use expr foldmethod.
Problem:
Sometimes, when nvim sends the `win_viewport` event, for example when scrolling
with visible folds on the screen, it reports the `scroll_delta` value one batch
into "future". So when the client application is trying to show the new viewport
it's not yet updated, resulting in temporary corruption / screen flickering.
For more details see #23609, and starting from [this comment](
https://github.com/neovide/neovide/pull/1790#issuecomment-1518697747) in
https://github.com/neovide/neovide/pull/1790,, where the issue was first
detected. Note that some of the conclusions in those are not fully accurate, but
the general observations are.
Solution:
When there are pending updates to a Window, delay the `win_viewport` UI event
until the updates are sent. This ensures that there's no flush between sending
the viewport and updating of the lines corresponding to the new viewport.
Document the existing viewport behaviour (for cases where there are no
extra flushes), give a hint about how applications can deal with the slightly
surprising behaviour of the viewport event being sent after the updates.
Fixes https://github.com/neovim/neovim/issues/23609
Problem: nvim_buf_set_text(), nvim_open_term() and termopen() all change buffer
text, which is forbidden during textlock. Additionally, nvim_open_term() and
termopen() may be used to convert the cmdwin buffer into a terminal buffer,
which is weird.
Solution: Allow nvim_buf_set_text() and nvim_open_term() in the cmdwin, but
disallow nvim_open_term() from converting the cmdwin buffer into a terminal
buffer. termopen() is not allowed in the cmdwin (as it always operates on
curbuf), so just check text_locked().
Also happens to improve the error in #21055: nvim_buf_set_text() was callable
during textlock, but happened to check textlock indirectly via u_save();
however, this caused the error to be overwritten by an unhelpful "Failed to
save undo information" message when msg_list == NULL (e.g: an `<expr>` mapping
invoked outside of do_cmdline()).
Problem: some API functions that check textlock (usually those that can change
curwin or curbuf) can break the cmdwin.
Solution: make FUNC_API_CHECK_TEXTLOCK call text_locked() instead, which already
checks for textlock, cmdwin and `<expr>` status.
Add FUNC_API_TEXTLOCK_ALLOW_CMDWIN to allow such functions to be usable in the
cmdwin if they can work properly there; the opt-in nature of this attribute
should hopefully help mitigate future bugs.
Also fix a regression in #22634 that made functions checking textlock usable in
`<expr>` mappings, and rename FUNC_API_CHECK_TEXTLOCK to FUNC_API_TEXTLOCK.
Problem:
Showing an error via vim.notify() makes it awkward for callers such as
lsp/handlers.lua to avoid showing redundant errors.
Solution:
Return the message instead of showing it. Let the caller decide whether
and when to show the message.
---
Rejected experiment: move vim.ui.open() to vim.env.open()
Problem:
`vim.ui` is where user-interface "providers" live, which can be
overridden. It would also be useful to have a "providers" namespace for
platform-specific features such as "open", clipboard, python, and the other
providers listed in `:help providers`. We could overload `vim.ui` to
serve that purpose as the single "providers" namespace, but
`vim.ui.nodejs()` for example seems awkward.
Solution:
`vim.env` currently has too narrow of a purpose. Overload it to also be
a namespace for `vim.env.open`.
diff --git a/runtime/lua/vim/_meta.lua b/runtime/lua/vim/_meta.lua
index 913f1fe20348..17d05ff37595 100644
--- a/runtime/lua/vim/_meta.lua
+++ b/runtime/lua/vim/_meta.lua
@@ -37,8 +37,28 @@ local options_info = setmetatable({}, {
end,
})
-vim.env = setmetatable({}, {
- __index = function(_, k)
+vim.env = setmetatable({
+ open = setmetatable({}, {
+ __call = function(_, uri)
+ print('xxxxx'..uri)
+ return true
+ end,
+ __tostring = function()
+ local v = vim.fn.getenv('open')
+ if v == vim.NIL then
+ return nil
+ end
+ return v
+ end,
+ })
+ },
+ {
+ __index = function(t, k, ...)
+ if k == 'open' then
+ error()
+ -- vim.print({...})
+ -- return rawget(t, k)
+ end
local v = vim.fn.getenv(k)
if v == vim.NIL then
return nil
Problem: Tabline highlight wrong after truncated double width label.
Solution: Fill up half a double width character later. (closesvim/vim#12614)
d392a74c5a
Problem:
nvim_parse_cmd() in pcall() may show an error message (side-effect):
:lua pcall(vim.api.nvim_parse_cmd, vim.fn.getcmdline(), {})
E16: Invalid range
Solution:
Avoid emsg() in the nvim_parse_cmd() codepath.
- refactor(api): add error message output parameter to get_address()
- fix: null check emsg() parameter
- refactor: remove emsg_off workaround from do_incsearch_highlighting()
- refactor: remove emsg_off workaround from cmdpreview_may_show()
- refactor: remove remaining calls to emsg() from parse_cmd_address() and get_address()
- (refactor): lint set_cmd_dflall_range()
- refactor: addr_error() - move output parameter to return value
Fix#20339
TODO:
These are the functions called by `get_address()`:
```
nvim_parse_cmd() -> parse_cmdline() -> parse_cmd_address() -> get_address()
skipwhite()
addr_error()
qf_get_cur_idx()
qf_get_cur_valid_idx()
qf_get_size()
qf_get_valid_size()
mark_get()
mark_check()
assert()
skip_regexp()
magic_isset()
> do_search()
> searchit()
ascii_isdigit()
getdigits()
getdigits_int32()
compute_buffer_local_count()
hasFolding()
```
From these functions, I found at least two that call emsg directly:
- do_search()
- seems to be simple to refactor
- searchit()
- will be more challenging because it may generate multiple error messages,
which can't be handled by the current `errormsg` out-parameter.
For example, it makes multiple calls to `vim_regexec_multi()` in a loop that
possibly generate error messages, and later `searchit()` itself may generate
another one:
- c194acbfc4/src/nvim/search.c (L631-L647)
- c194acbfc4/src/nvim/search.c (L939-L954)
---------
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
`nvim -v` and `:version` prints system vimrc, fallback files, and compilation
info by default, which most people don't care about and just clutters up the
output.
Solution:
Omit extra info unless 'verbose' is set.
Problem:
`:lua vim.cmd.win_getid(30,10)` is interpreted as `:win[size] 30 10`.
User intention was to call `vim.fn.win_getid(30,10)`.
Solution:
Check that the `cmd` actually matches the resolved command.
Problem: Resetting local option to global value is inconsistent.
Solution: Handle "<" specifically for 'scrolloff' and 'sidescrolloff'.
(closesvim/vim#12594)
bf5f189e44
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Treesitter fold is not updated if treesitter hightlight is not
active. More precisely, updating folds requires `LanguageTree:parse()`.
Solution: Call `parse()` before computing folds and compute folds when
lines are added/removed.
This doesn't guarantee correctness of the folds, because some changes
that don't add/remove line won't update the folds even if they should
(e.g. adding pair of braces). But it is good enough for most cases,
while not introducing big overhead.
Also, if highlighting is active, it is likely that
`TSHighlighter._on_buf` already ran `parse()` (or vice versa).
Problem: Regression test doesn't fail when fix is reverted.
Solution: Add "n" to 'cpoptions' instead of using :winsize. (closesvim/vim#12587,
issue vim/vim#12528)
e429893741
Problem: Divide by zero when scrolling with 'smoothscroll' set.
Solution: Avoid using a negative width. (closesvim/vim#12540, closesvim/vim#12528)
8154e642aa
Co-authored-by: fullwaywang <fullwaywang@tencent.com>
Problem: Not all cabal config files are recognized.
Solution: Add a couple of patterns. (Marcin Szamotulski, closesvim/vim#12463)
166cd7b801
Also:
- Do not expand Lua patterns in environment variables used in file patterns.
- Test $XDG_CONFIG_HOME on Windows, as it can be used by Nvim (and the runner
sets it).
Co-authored-by: Marcin Szamotulski <coot@coot.me>
Problem:
Using "nvim -l args.lua" without passing extra script args, does not set `_G.arg[0]`.
Steps to reproduce:
```
cat > args.lua<<EOF
vim.print(_G.arg, '')
vim.print(vim.v.argv, '')
EOF
nvim --clean -l args.lua
```
Solution:
Fix condition in command_line_scan.
Problem: Empty CmdlineEnter autocommand causes errors in Ex mode.
Solution: Save and restore ex_pressedreturn. (Christian Brabandt,
closes # 12581, closesvim/vim#12578)
590aae3557
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Not all filetype file name matches are tested.
Solution: Add more file names to test with. (Jonas Strittmatter,
closesvim/vim#12569)
bd087ae8f0
Co-authored-by: smjonas <jonas.strittmatter@gmx.de>
Redrawing of 'statusline' and 'winbar' are actually already inhibited by
RedawingDisabled in Ex mode.
In Vim there is a check for `msg_scrolled == 0` (which is false in Ex
mode) since Vim doesn't have msgsep. Add a `!exmode_active` check here
in Nvim instead.
Problem: zserio files are not recognized.
Solution: Add a pattern for zserio files. (Dominique Pellé,
closesvim/vim#12544)
2b994da57a
Co-authored-by: =?UTF-8?q?Dominique=20Pell=C3=A9?= <dominique.pelle@gmail.com>
Enforce consistent terminology (defined in
`gen_help_html.lua:spell_dict`) for common misspellings.
This does not spellcheck English in general (perhaps a future TODO,
though it may be noisy).
Problem:
- `vim.json` exposes various global options which:
- affect all Nvim Lua plugins (especially the LSP client)
- are undocumented and untested
- can cause confusing problems such as: cc76ae3abe
- `vim.json` exposes redundant mechanisms:
- `vim.json.null` is redundant with `vim.NIL`.
- `array_mt` is redundant because Nvim uses a metatable
(`vim.empty_dict()`) for empty dict instead, which `vim.json` is
configured to use by default (see `as_empty_dict`).
Example:
```
:lua vim.print(vim.json.decode('{"bar":[],"foo":{}}'))
--> { bar = {}, foo = vim.empty_dict() }
```
Thus we don't need to also decorate empty arrays with `array_mt`.
Solution:
Remove the functions from the public vim.json interface.
Comment-out the implementation code to minimize drift from upstream.
TODO:
- Expose the options as arguments to `vim.json.new()`
Add automatic refresh and a public interface on top of #23736
* add on_reload, on_detach handlers in `enable()` buf_attach, and
LspDetach autocommand in case of manual detach
* unify `__buffers` and `hint_cache_by_buf`
* use callback bufnr in `on_lines` callback, bufstate: remove __index override
* move user-facing functions into vim.lsp.buf, unify enable/disable/toggle
Closes#18086
Co-authored by: zeertzjq <zeertzjq@outlook.com>
Co-authored by: Steven Todd McIntyre II <114119064+stmii@users.noreply.github.com>
Co-authored by: nobe4 <nobe4@users.noreply.github.com>
- docs: mention --luadev-mod to run with lua runtime files
When changing a lua file in the ./runtime folder, a new contributor
might expect changes to be applied to the built Neovim binary.
Problem: Current implementation of "remove trailing /" doesn't
account for the case of literal '/' as path.
Solution: Remove trailing / only if it preceded by something else.
Co-authored by: notomo <notomo.motono@gmail.com>
Previously, filtering code actions with the "only" option failed
if the code action kind contained special Lua pattern chars such as "-"
(e.g. the ocaml language server supports a "type-annotate" code action).
Solution: use string comparison instead of string.find
Problem: Error message is cleared when removing mode message.
Solution: Also reset flags when the message is further down.
da51ad51bf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Message is cleared when removing mode message (Gary Johnson).
Solution: Do not clear the command line after displaying a message.
800cdbb7ca
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Expanding a pattern interferes with command line completion.
Solution: Set the file index only when appropriate. (closesvim/vim#12519)
094dd152fe
Problem: Having utf16idx() rounding up is inconvenient.
Solution: Make utf16idx() round down. (Yegappan Lakshmanan, closesvim/vim#12523)
95707037af
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Vim9: not enough test coverage for executing :def function.
Solution: Add a few more tests. Fix inconsistencies.
6b8c7ba062
Cherry-pick a blank line in test_listdict.vim from patch 8.2.3842.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: no type check when assigning a list range. (Naohiro Ono)
Solution: Check the member type. (closesvim/vim#8750)
89071cb6a1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests.
Solution: Run more existing tests for Vim9 script.
700e6b1662
Cherry-pick test_listdict.vim change from patch 8.2.3854.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests.
Solution: Also run existing tests for Vim9 script. Make errors more
consistent.
f47c5a8e2d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough tests run with Vim9.
Solution: Run a few more tests in Vim9 script and :def function. Fix that
items(), keys() and values9) return zero for a NULL dict.
Make join() return an empty string for a NULL list. Make sort()
return an empty list for a NULL list.
ef98257593
Skip f_reverse() change for consistency with other functions.
Skip Test_null_list() and Test_null_dict() because of missing patches.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: tests are only executed for legacy script.
Solution: Run more tests also for Vim9 script. Fix uncovered problems.
5dd839ce20
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: not enough code is tested.
Solution: Use CheckLegacyAndVim9Success() in more places. Fix uncovered
problems.
63cb6567f0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Adjust relevant Lua tests. Refactor testing logic for tv_get_string_*
functions into test_string_fn().
Note that vim_snprintf(), which is used for stringifying floats, always
calls xfree(tofree), even if tofree is NULL, so we need to expect that
in the alloc log.
Problem: Tests failing because there is no error for float to string
conversion.
Solution: Change the check for failure to check for correct result. Make
some conversions strict in Vim9 script.
3cfa5b16b0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Substitute() accepts a number but not a float expression.
Solution: Also accept a float. (closesvim/vim#8331)
7a2217bedd
Vim9script is N/A. No need to port the strict argument and
tv_get_string_buf_chk_strict(), as it's only used for Vim9script.
Like the patch, use vim_snprintf over snprintf, as the "%g" specifier in
snprintf removes the ".0" from integer floats.
This means similiar to numbers, floats are (mostly) convertable to
strings.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No longer get an error for string concatenation with float.
(Tsuyoshi Cho)
Solution: Only convert float for Vim9 script. (closesvim/vim#6787)
2e0866128b
Vim9script is N/A.
Required for v8.2.2949.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
Nvim version string typically has a "build" component
but vim.version() doesn't report it.
Solution:
Add the "build" field to vim.version().
Closes#23863
Problem: Visual area not shown when using 'showbreak' and start of line is
not visible. (Jaehwang Jung)
Solution: Adjust "fromcol" for the space taken by 'showbreak'.
(closesvim/vim#12514)
f578ca2c8f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Filetype name t32 is a bit obscure.
Solution: Rename t32 to trace32. (Christoph Sax, closesvim/vim#12512)
740df76c90
Co-authored-by: Christoph Sax <christoph.sax@mailbox.org>
Problem: charidx() and utf16idx() result is not consistent with byteidx().
Solution: When the index is equal to the length of the text return the
lenght of the text instead of -1. (Yegappan Lakshmanan,
closesvim/vim#12503)
577922b917
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Nix files are not recognized from the hashbang line.
Solution: Add a hashbang check. (issue vim/vim#12507)
19548c6a74
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Trace32 files are not recognized.
Solution: Add patterns for the t32 filetype. (Christoph Sax, closesvim/vim#12505)
7fbcee6f92
Co-authored-by: Christoph Sax <christoph.sax@mailbox.org>
