Fixes#24339
rust-analyzer sends "Invalid offset" error in such cases. Some other
servers handle it specially.
LSP spec mentions that "A range is comparable to a selection in an
editor". Most editors don't handle trailing newlines the same way
Neovim/Vim does, it's clearly visible if it's present or not. With that
in mind it's understandable why sending end position as simply the start
of the line after the last one is considered invalid in such cases.
patch 9.0.1918: No filetype detection for Authzed filetypes
Problem: No filetype detection for Authzed filetypes
Solution: Detect the *.zed file extension as authzed filetype
closes: vim/vim#131295790a54166
Co-authored-by: Matt Polzin <mpolzin@workwithopal.com>
Memoizes a function, using a custom function to hash the arguments.
Private for now until:
- There are other places in the codebase that could benefit from this
(e.g. LSP), but might require other changes to accommodate.
- Invalidation of the cache needs to be controllable. Using weak tables
is an acceptable invalidation policy, but it shouldn't be the only
one.
- I don't think the story around `hash_fn` is completely thought out. We
may be able to have a good default hash_fn by hashing each argument,
so basically a better 'concat'.
Problem: r_CTRL-C works differently in visual mode
Solution: Make r_CTRL-C behave consistent in visual mode
in terminal and Windows GUI
in visual mode, r CTRL-C behaves strange in Unix like environments. It
seems to end visual mode, but still is waiting for few more chars,
however it never seems to replace it by any characters and eventually
just returns back into normal mode.
In contrast in Windows GUI mode, r_CTRL-C replaces in the selected area
all characters by a literal CTRL-C.
Not sure why it behaves like this. It seems in the Windows GUI, got_int
is not set and therefore behaves as if any other normal character has
been pressed.
So remove the special casing of what happens when got_int is set and
make it always behave like in Windows GUI mode. Add a test to verify it
always behaves like replacing in the selected area each selected
character by a literal CTRL-C.
closes: vim/vim#13091closes: vim/vim#13112476733f3d0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Previously, a screen cell would occupy 28+4=32 bytes per cell
as we always made space for up to MAX_MCO+1 codepoints in a cell.
As an example, even a pretty modest 50*80 screen would consume
50*80*2*32 = 256000, i e a quarter megabyte
With the factor of two due to the TUI side buffer, and even more when
using msg_grid and/or ext_multigrid.
This instead stores a 4-byte union of either:
- a valid UTF-8 sequence up to 4 bytes
- an escape char which is invalid UTF-8 (0xFF) plus a 24-bit index to a
glyph cache
This avoids allocating space for huge composed glyphs _upfront_, while
still keeping rendering such glyphs reasonably fast (1 hash table lookup
+ one plain index lookup). If the same large glyphs are using repeatedly
on the screen, this is still a net reduction of memory/cache
consumption. The only case which really gets worse is if you blast
the screen full with crazy emojis and zalgo text and even this case
only leads to 4 extra bytes per char.
When only <= 4-byte glyphs are used, plus the 4-byte attribute code,
i e 8 bytes in total there is a factor of four reduction of memory use.
Memory which will be quite hot in cache as the screen buffer is scanned
over in win_line() buffer text drawing
A slight complication is that the representation depends on host byte
order. I've tested this manually by compling and running this
in qemu-s390x and it works fine. We might add a qemu based solution
to CI at some point.
runtime(netrw): fix filetype detection for remote editing files
closes: vim/vim#12990closes: vim/vim#12992
this partially reverses commit 71badf9 by commenting out the line that
intentionally sets the filetype to an empty string.
d8b86c937a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
With incremental injection parsing, injected languages' parsers parse
only the relevant regions and stores the result in _trees with the index
of the corresponding region. Therefore, there can be holes in _trees.
Solution:
* Use generic table functions where appropriate.
* Fix type annotations and docs.
Problem:
It doesn't make much sense to flatten each region (= list of ranges).
This coincidentally worked for region with a single range.
Solution:
Custom function for combining regions.
Problem
---
If a highlighter query returns a significant number of predicate
non-matches, the highlighter will scan well past the end of the window.
Solution
---
In the iterator returned from `iter_captures`, accept an optional
parameter `end_line`. If no parameter provided, the behavior is
unchanged, hence this is a non-invasive tweak.
Fixes: #25113nvim-treesitter/nvim-treesitter#5057
The name for_each_child is misleading and caused bugs.
After #25111, #25115, there are no more usages of `for_each_child` in Nvim.
In the future if we want to restore this functionality we can consider a
generalized vim.traverse(node, key, visitor) function.
Problem:
Folds are opened when the visible range changes even if there are no
modifications to the buffer, e.g, when using zM for the first time. If
the parsed tree was invalid, on_win re-parses and gets empty tree
changes, which triggers fold updates.
Solution:
Don't update folds in on_changedtree if there are no changes.
The removes the previous restriction that nvim_buf_set_extmark()
could not be used to highlight arbitrary multi-line regions
The problem can be summarized as follows: let's assume an extmark with a
hl_group is placed covering the region (5,0) to (50,0) Now, consider
what happens if nvim needs to redraw a window covering the lines 20-30.
It needs to be able to ask the marktree what extmarks cover this region,
even if they don't begin or end here.
Therefore the marktree needs to be augmented with the information covers
a point, not just what marks begin or end there. To do this, we augment
each node with a field "intersect" which is a set the ids of the
marks which overlap this node, but only if it is not part of the set of
any parent. This ensures the number of nodes that need to be explicitly
marked grows only logarithmically with the total number of explicitly
nodes (and thus the number of of overlapping marks).
Thus we can quickly iterate all marks which overlaps any query position
by looking up what leaf node contains that position. Then we only need
to consider all "start" marks within that leaf node, and the "intersect"
set of that node and all its parents.
Now, and the major source of complexity is that the tree restructuring
operations (to ensure that each node has T-1 <= size <= 2*T-1) also need
to update these sets. If a full inner node is split in two, one of the
new parents might start to completely overlap some ranges and its ids
will need to be moved from its children's sets to its own set.
Similarly, if two undersized nodes gets joined into one, it might no
longer completely overlap some ranges, and now the children which do
needs to have the have the ids in its set instead. And then there are
the pivots! Yes the pivot operations when a child gets moved from one
parent to another.
`LanguageTree:parse` is recursive, and calls
`LanguageTree:for_each_child`, which is also recursive.
That means that, starting from the third level (child of child of root),
nodes will be parsed twice.
Which then means that if the tree is N layers deep, there will be ~2^N
parses even if the branching factor is 1.
Now, why was the tree deepening with each character inserted? And why
did this only regress in #24647? These are mysteries for another time.
Fixes: #25104
runtime(doc): documentation updates
This is a collection of various improvements to the help pages
closesvim/vim#12790596ad66d1d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Houl <anwoku@yahoo.de>
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Problem:
* The guessed botline might be smaller than the actual botline e.g. when
there are folds and the user is typing in insert mode. This may result
in incorrect treesitter highlights for injections.
* botline can be larger than the last line number of the buffer, which
results in errors when placing extmarks.
Solution:
* Take a more conservative approximation. I am not sure if it is
sufficient to guarantee correctness, but it seems to be good enough
for the case mentioned above.
* Clamp it to the last line number.
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem: No runtime support for Mojo
Solution: Add basic filetype and syntax plugins
closes: vim/vim#13062closes: vim/vim#130630ce2c594d0
Co-authored-by: Mahmoud Abduljawad <mahmoud@masaar.com>
runtime(scala): Fix Scala highlighting string literal as type param (vim/vim#13070)
Since https://docs.scala-lang.org/sips/42.type.html which is implemented
in Scala 2.13 and in Scala 3 it possible to use string literals as
singleton types. So code like
```
someFunc["abc"]
```
is valid. Currently this code is not hightlighted correctly and worse if
there is an unclosed `(` in the string it breaks the formating in the
rest of the file.
I also submitted this patch to the mentioned project for this runtime
file: https://github.com/derekwyatt/vim-scala/pull/173 But there are no
commits there over the last 2 years and no response in the week since I
created it. Also the last change to the Scala syntax file:
https://github.com/vim/vim/pull/9594 is yet to be backported to that
repo. Therefore I am opening this PR as well to get some feedback on how
to proceed to get this fixed.
0661033075
Co-authored-by: Emil Ejbyfeldt <eejbyfeldt@liveintent.com>
Problem: Various Typos
Solution: Fix Typos
This is a collection of typo related commits.
closes: vim/vim#12753closes: vim/vim#13016ee17b6f70d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Co-authored-by: nuid64 <lvkuzvesov@proton.me>
Co-authored-by: Meng Xiangzhuo <aumo@foxmail.com>
Co-authored-by: Dominique Pellé <dominique.pelle@gmail.com>
runtime(tohtml): Update TOhtml to version 9.0v2 (vim/vim#13050)
Modified behavior:
- Change default value of g:html_use_input_for_pc from "fallback" to
"none". This means with default settings, only the standards-based
method to make special text unselectable is used. The old method
relying on unspecified browser behavior for <input> tags is now only
used if a user specifically enables it.
- Officially deprecate g:use_xhtml option (in favor of
g:html_use_xhtml) by issuing a warning message when used.
Bugfixes:
- Fix issue vim/vim#8547: LineNr and other special highlight groups did not
get proper style rules defined when using "hi link".
- Fix that diff filler was not properly added for deleted lines at the
end of a buffer.
Other:
- Refactored function definitions from long lists of strings to use
:let-heredoc variable assignment instead.
- Corrected deprecated "." string concatenation operator to ".."
operator in more places.
86cfb39030
Co-authored-by: fritzophrenic <fritzophrenic@gmail.com>
- Add runtime/lua/vim/vimhelp.lua, which is a translation of Vim's
runtime/import/dist/vimhelp.vim.
- Unlike Vim, run the highlighting from an ftplugin file instead of a
syntax file, so that it is run even if using treesitter.
runtime: don't execute external commands when loading ftplugins
This is a followup to 816fbcc262687b81fc46f82f7bbeb1453addfe0c (patch
9.0.1833: [security] runtime file fixes)
It basically disables that external commands are run on loading of the
filetype plugin, **unless** the user has set the `g:plugin_exec = 1`
global variable in their configuration or for a specific filetype the
variable g:<filetype>_exec=1.
There are a few more plugins, that may execute system commands like
debchangelog, gitcommit, sh, racket, zsh, ps1 but those do at least
do not run those commands by default during loading of the filetype plugin
(there the command is mostly run as convenience for auto-completion or
to provide documentation lookup).
closes: vim/vim#13034f7ac0ef509
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Tim Pope <vim@tpope.org>
runtime(ftplugin): allow to exec if curdir is in PATH
In case the current directory is present as valid $PATH entry, it is OK
to call the program from it, even if vim curdir is in that same
directory.
(Without that patch, for instance, you will not be able to open .zip
files while your current directory is /bin)
closes: vim/vim#1302767c951df4c
Co-authored-by: Anton Sharonov <anton.sharonov@gmail.com>
runtime: Fix problem of checking wrong cwd for ruby ftplugin (vim/vim#13026)
282a94be99
Co-authored-by: Anton Sharonov (ant0sha) <109120102+ant0sha@users.noreply.github.com>
Co-authored-by: Anton Sharonov <anton.sharonov@gmail.com>
runtime(php): Update the php indent script to the 1.75 (from 1.70) (vim/vim#13025)
Changes:
1.75:
- Fix 2072/PHP-Indenting-for-VImvim/vim#87: The indent optimization was causing wrong indentation of lines
preceded by a line ending with '}' when preceded by non white characters.
- Fix long standing non-reported regex escaping issue in cleaning end of line
comments function. This should help fixing some other unreported issues when
parts of codes are commented out at ends of lines...
1.74:
- Fix 2072/PHP-Indenting-for-VImvim/vim#86: Add support for `match` expression.
1.73:
- Fix 2072/PHP-Indenting-for-VImvim/vim#77 where multi line strings and true/false keywords at beginning of a
line would cause indentation failures.
1.72:
- Fix vim/vimvim/vim#5722 where it was reported that the option PHP_BracesAtCodeLevel
had not been working for the last 6 years.
1.71:
- Fix 2072/PHP-Indenting-for-VImvim/vim#75 where the indent script would hang on some multi-line quoted strings.
3170342af3
Co-authored-by: John Wellesz <john.wellesz@gmail.com>
runtime(ruby): Update syntax, indent and ftplugin files
While making changes to the ruby ftplugin, slightly change the exepath()
conditional from patch 9.0.1833 and move it after the :cd invocation.
closes: 12981
closes: 12994
da16a1b471
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Co-authored-by: Tim Pope <code@tpope.net>
Problem: runtime files may execute code in current dir
Solution: only execute, if not run from current directory
The perl, zig and ruby filetype plugins and the zip and gzip autoload
plugins may try to load malicious executable files from the current
working directory. This is especially a problem on windows, where the
current directory is implicitly in your $PATH and windows may even run a
file with the extension `.bat` because of $PATHEXT.
So make sure that we are not trying to execute a file from the current
directory. If this would be the case, error out (for the zip and gzip)
plugins or silently do not run those commands (for the ftplugins).
This assumes, that only the current working directory is bad. For all
other directories, it is assumed that those directories were
intentionally set to the $PATH by the user.
816fbcc262
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(optwin): Fix for 'splitkeep' option (vim/vim#12974)
'spk' was used as a boolean, rather than a string option.
0b8b145bf8
Co-authored-by: xrandomname <141588647+xrandomname@users.noreply.github.com>
The class `lsp.Client` has a public member `server_capabilities`,
which is assumed to be non-nil once initialized, as documented in
`:help vim.lsp.client`. Due to the possibility that it may be nil
before initialization, `lsp.Client` was not having a proper lua type
annotations on the field `server_capabilities`.
Instead of having a nil `server_capabilities` until initialized in
the RPC response callback, we can have an initial value of empty table.
This CHANGES the behavior of the `server_capabilities` field in a way
that it is no longer `nil` until initialization. Note that, as
already documented, `server_capabilities` should never be nil when
it is once initialized and thus ready to be used in user configs.
This fixes the issue where the LspNotify handlers for inlay_hint /
diagnostics would end up refreshing all attached clients.
The handler would call util._refresh, which called
vim.lsp.buf_request, which calls the method on all attached clients.
Now util._refresh takes an optional client_id parameter, which is used
to specify a specific client to update.
This commit also fixes util._refresh's handling of the `only_visible`
flag. Previously if `only_visible` was false, two requests would be made
to the server: one for the visible region, and one for the entire file.
Co-authored-by: Stanislav Asunkin <1353637+stasjok@users.noreply.github.com>
Co-authored-by: Mathias Fußenegger <mfussenegger@users.noreply.github.com>
Problem: When double clicking a line starting with a #, the code assumes
there is a fold there and tries to close it, resulting in an error if
there isn't a fold.
Solution: Check foldlevel before performing "zc".
Problem: Rexx files may not be recognised
Solution: Add shebang detection and improve disambiguation of *.cls
files
closes: vim/vim#12951e06afb7860
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
runtime: cleanup :Sman command via the undo_ftplugin mechanism (vim/vim#12967)
Regards to @dkearns as noticed in
2ac708b5489d8ef7cc43
Co-authored-by: Enno <Konfekt@users.noreply.github.com>
Problem:
With treesitter fold, InsertLeave can be slow, because a single session
of insert mode may schedule multiple fold updates in on_bytes and
on_changedtree.
Solution:
Don't create duplicate autocmds.
Problem:
'endofline' can be used to detect if a file ends of <EOL>, however
editorconfig can break this.
Solution:
Set 'endofline' during BufWritePre
Fixes: #24869
Problem: Now way to show text at the bottom part of floating window
border (a.k.a. "footer").
Solution: Allows `footer` and `footer_pos` config fields similar to
`title` and `title_pos`.
runtime(termdebug): more termdebug fixes and improvements (vim/vim#12892)
- Fix and attempt to simplify :Frame/:Up/:Down documentation.
- Accept a count instead for :Up/:Down/+/-.
- Update the "Last Change" dates.
- Fix a missing :let (caused an error if gdb fails to start).
- Wipe the prompt buffer when ending prompt mode (if it exists and wasn't wiped
by the user first). Avoids issues with stale prompt buffers (such as E95 when
starting a new prompt mode session).
- Kill the gdb job if the prompt buffer is unloaded (similar to what's done for
a terminal buffer). Fixes not being able to start a new termdebug session if
the buffer was wiped by the user, for example.
3d3a9152fa
runtime(termdebug): add frame related commands (vim/vim#12511)
implementing `:Frame`, `:Up` and `:Down'
2ae7ffe0bc
Use maparg() for saving K as it's since been ported (and supports Lua callbacks
and the other API fields).
Use the 3 argument variant of mapset(), as the single argument one isn't ported
yet (v8.2.4861).
Co-authored-by: Simon Sobisch <simonsobisch@web.de>
Unlike Vim's job_stop(), Nvim's jobstop() does not take a signal argument, and
always sends SIGTERM/KILL.
:Stop and Ctrl-C in prompt mode is supposed to interrupt the program like in
terminal mode, not kill GDB.
Also, maybe libuv's kill() works on Windows? If so, the logic above could be
removed, but I don't have a Windows machine available to test that.
Also "set nomodified" when ending prompt mode, like Vim (avoids E37).
runtime(termdebug): Fix various Termdebug issues (vim/vim#12875)
* Fix some Termdebug issues after vim/vim#12403
* Fix :Asm in Termdebug prompt mode
* Fix Termdebug s:DecodeMessage escaping logic
a76f3221cd
Adjust disassembly message forwarding for Nvim, as its callback can receive
many lines at once.
Currently, just forward each disassembly line individually to s:CommOutput();
it's possible to do this in batch instead, but this is simpler.
I suggested moving to a GDB MI-based approach for the disassemble stuff
upstream, which should simplify the logic a lot if implemented (and possibly
allow for getting rid of the `&"disassemble ...` special-casing).
Also, correct "(gdb)" to include a trailing space; the stray GDB prompts were
being ignored by s:CommOutput() anyway, so this had caused no ill effects.
Vim splits lines on "\r", then trims any prefixed "\n".
But in Nvim, job output lines are split on "\n" (like readfile() in binary
mode), so trim any suffixed "\r" instead.
This gets rid of the trailing "^M" character in messages parsed from the jobs.
runtime(termdebug): refactor error printing (vim/vim#12856)
// vs not act like exception from vim or termdebug
f6fb52b667
Co-authored-by: Shane-XB-Qian <shane.qian@foxmail.com>
Runtime(termdebug): Add support to view local and argument variables
closes: 12403
9f29621415
Rename the existing "s:running" (#16790) to "s:gdb_running" to not clash with
the "s:running" introduced in this patch (which instead relates to whether the
debugged program is currently running in gdb).
Keep the file `:retab`bed as before.
Co-authored-by: laburnumT <flo.striker@gmail.com>
The on_detect functions returned by filetype.lua set buffer local
variables which are often used by filetype plugins. For example, the
on_detect function for shell buffers sets variables such as b:is_bash or
b:is_sh, which are used by the sh ftplugin.
When called after setting the buffer's filetype, these variables cannot
be used by the ftplugin (because they are not yet defined). Instead,
call on_detect before setting the buffer filetype so that any buffer
variables set by on_detect can be used in the ftplugin.
runtime(menu): define shortcut for File->Open Tab (vim/vim#12895)
Seems missing as noted by Antonio Giovanni Colombo. So add it and use
the 'T' as shortcut, which does not seem to be used in the File dialog.
Verified on Windows.
e059fae100
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Antonio Giovanni Colombo <azc100@gmail.com>
runtime(bindzone): updated syntax file
- Add support for APL type in runtime/syntax/bindzone.vim
- all values between 0- 4294967295 are valid serials
closes: vim/vim#9743closes: vim/vim#83826e93689bde
vim-patch:544b209a2d4b
runtime(scala): Link Scala highlighting groups using 'hi def link' in syntax script (vim/vim#9594)
They were linked using 'hi link' which made it impossible for color
schemes to override highlight groups.
544b209a2d
Co-authored-by: Oskar Stenman <oskar@cetex.se>
Co-authored-by: Job Noorman <job@noorman.info>
runtime(go): Update Go syntax file with 1.21 builtins (vim/vim#12876)
* Update Go syntax file with 1.21 builtins
b0d584d97a
Co-authored-by: José-Paul D <fixed.combinator@gmail.com>
runtime: Remove Brams name from a few more runtime files (vim/vim#12780)
syntax/model.vim: minor wording improvement
e8d6f03f6a
Use the updated "Last Change" date for all.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Problem: cannot distinguish Forth and Fortran *.f files
Solution: Add Filetype detection Code
Also add *.4th as a Forth filetype
closes: vim/vim#1225119a3bc3add
Don't remove filetype files from Vim patches:
- filetype.vim, script.vim, ft.vim usually contain useful changes
- script.vim and ft.vim don't even have their paths spelled correctly
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: vim/vim#12956closes: vim/vim#126434a8eb6e7a9
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(dosini): save and restore cpo value in syntax script
Commit dd0ad2598898c2b4641c4acd5b70b6184fa698ed introduced
line-continuation. However, to make sure this does not cause an error
when Vim is run in compatible mode, we need to set compatibility mode
temporarily and reset it back when finished reading the file.
This fixes: https://groups.google.com/g/vim_use/c/9zccgo_RIqM/m/xlUmhBktBgAJ6909639249
Co-authored-by: Christian Brabandt <cb@256bit.org>
