Problem: No tests for the termdebug plugin
Solution: Add some simple tests for the termdebug plugin
closes: vim/vim#1292758f39d89a8
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: tests: failure in test_arabic
Solution: adjust the test for the changed arabic keymap
2a94e98792
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: complete_info() skips entries with 'noselect'
Solution: Check, if first entry is at original text state
Unfortunately, Commit daef8c74375141974d61b85199b383017644978c
introduced a regression, that when ':set completeopt+=noselect' is set
and no completion item has been selected yet, it did not fill the
complete_info['items'] list.
This happened, because the current match item did not have the
CP_ORIGINAL_TEXT flag set and then the cp->prev pointer did point to the
original flag item, which caused the following while loop to not being
run but being skipped instead.
So when the 'noselect' is set, only start with to the previous selection
item, if the initial completion item has the CP_ORIGINAL_TEXT flag set,
else use the 2nd previous item instead.
fixes: vim/vim#13451closes: vim/vim#1345257f9ce1a09
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: With 'smoothscroll' set, "w_skipcol" is not reset when unsetting 'wrap'.
Resulting in incorrect calculation of the cursor position.
Solution: Reset "w_skipcol" when unsetting 'wrap'.
fixes: vim/vim#12970closes: vim/vim#134391bf1bf569b
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: vim/vim#13367closes: vim/vim#133754bca4897a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: vim/vim#13402
related: vim/vim#12971closes: vim/vim#13408daef8c7437
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm9198c1f2b1
N/A patch:
vim-patch:9.0.2073: typo in quickfix.c comments
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: vim/vim#13419b731800522
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: vim/vim#133997d254dbc2d
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: vim/vim#1340584394f2be4
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: vim/vim#13396a36acb7ac4
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: vim/vim#1338047416d1a74
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: vim/vim#13389a8c664a042
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: vim/vim#13376closes: vim/vim#13377c59c1e0d88
The change in check_due_timer() is N/A as Nvim calls timer callbacks on
the main loop.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: vim/vim#13371a0e1f06f04
Problem: Wrong color for half of wide character next to pum scrollbar.
Solution: Redraw the screen cell with the right color. (closesvim/vim#9874)
35d8c2010e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: completion shows current word after completion restart
Solution: remove the word being completed after completion restart
The word being completed is shown in a completion list after completion
restart, because it isn't removed from the current buffer before
searching for matches.
Also adjust `Test_complete_add_onechar` to match the new behavior.
closes: vim/vim#133492e3cd52fa0
Co-authored-by: nwounkn <nwounkn@gmail.com>
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: vim/vim#13320bd734c3bea
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: vim/vim#12230closes: vim/vim#1297169fb5afb3b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: vim/vim#13228closes: vim/vim#13243dd75fcfbdf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: vim/vim#133164a82bdfaa8
Co-authored-by: Martin Tournoij <martin@arp242.net>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: test: undofile left behind
Solution: cleanup undofile
fix: tmp file not deleted when running make test_undo
Temporary file `.Xtestfile.txt.un~` was left running `make test_undo`
and vim was configured with:
```
./configure --with-features=normal --enable-gui=no --enable-terminal
```
closes: vim/vim#13304b07b9dc4da
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: vim/vim#13219closes: vim/vim#132108e5f26ec6a
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: vim/vim#132560583491277
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: vim/vim#13249closes: vim/vim#132376d11347260
N/A patch:
vim-patch:9.0.1976: style: space before tab in optionstr.c
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: win32: missing '**' expansion test (after v9.0.1947)
Solution: Add test for MS-Windows
win32: Add "**" test
Vim supports "**" on MS-Windows. However, it is not tested by
`Test_glob_extended_bash`.
Unlike Unix, it doesn't use 'shell' and doesn't support {,} expansion.
So, I added as a separate test.
related: vim/vim#13205closes: vim/vim#132504a1ad55564
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: vim/vim#132246ee7b521fa
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Cmdline completion for 'listchars' fields doesn't include
"multispace" and "leadmultispace" (after 9.0.1958).
Solution: Include "multispace" and "leadmultispace" in lcstab.
closes: vim/vim#132251f025b01e2
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: vim/vim#13182900894b09a
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Configure script may not detect xattr correctly
Solution: include sys/xattr instead of attr/xattr,
make Test_write_with_xattr_support() test
xattr feature correctly
This also applies to the Smack security feature, so change the include
and configure script for it as well.
closes: vim/vim#132296de4e58cf2
Problem: No support for writing extended attributes
Solution: Add extended attribute support for linux
It's been a long standing issue, that if you write a file with extended
attributes and backupcopy is set to no, the file will loose the extended
attributes.
So this patch adds support for retrieving the extended attributes and
copying it to the new file. It currently only works on linux, mainly
because I don't know the different APIs for other systems (BSD, MacOSX and
Solaris). On linux, this should be supported since Kernel 2.4 or
something, so this should be pretty safe to use now.
Enable the extended attribute support with normal builds.
I also added it explicitly to the :version output as well as make it
able to check using `:echo has("xattr")`, to have users easily check
that this is available.
In contrast to the similar support for SELINUX and SMACK support (which
also internally uses extended attributes), I have made this a FEAT_XATTR
define, instead of the similar HAVE_XATTR.
Add a test and change CI to include relevant packages so that CI can
test that extended attributes are correctly written.
closes: vim/vim#306closes: vim/vim#13203e085dfda5d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Custom cmdline completion skips original cmdline when pressing
Ctrl-P at first match if completion function invokes glob().
Solution: Move orig_save into struct expand_T.
closes: vim/vim#1321628a23602e8
Problem: Vim9: error codes spread out
Solution: group them together and reserve 100
more for future use
Reserve 100 error codes for future enhancements to the Vim9 class
support
closes: vim/vim#13207413f83990f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Bash Expansion test fails on Windows/MacOS
Solution: Disable Test_glob_extended_bash for now
This test doesn't work on Windows even if bash can be executed, since
the globstar functionality has only been enabled in Unix builds of Vim
(Commit 9eb1ce531527a7177d16373b0f8689bbcd3d5f73, patch 9.0.1946).
closes: vim/vim#1320503ca4002c1
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: filename expansion using ** in bash may fail
Solution: Try to enable the globstar setting
Starting with bash 4.0 it supports extended globbing using the globstar
shell option. This makes matching recursively below a certain directory
using the ** pattern work as expected nowadays. However, we need to
explicitly enable this using the 'shopt -s globstar' bash command.
So let's check the bash environment variable $BASH_VERSINFO (which is
supported since bash 3.0 and conditionally enable the globstar option,
if the major version is at least 4. For older bashs, this at least
shouldn't cause errors (unless one is using really ancient bash 2.X or
something).
closes: vim/vim#13002closes: vim/vim#131449eb1ce5315
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: CursorHoldI event interferes with "CTRL-G U". (Naohiro Ono)
Solution: Restore the flag for "CTRL-G U" after triggering CursorHoldI.
(closesvim/vim#8937)
5a9357d0bf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: TextChanged does not trigger after TextChangedI.
Solution: Store the tick separately for TextChangedI. (Christian Brabandt,
closesvim/vim#8968, closesvim/vim#8932)
db3b44640d
Co-authored-by: Christian Brabandt <cb@256bit.org>
This was only used to avoid the effect of SHM_OVERALL. This can easily
be handled in isolation, instead of clearing out all of 'shortmess' which
has unwanted side effects and mystifies what really is going on.
Problem: multispace wrong when scrolling horizontally
Solution: Update position in "multispace" or "leadmultispace" also in
skipped chars. Reorder conditions to be more consistent.
closes: vim/vim#13145closes: vim/vim#13147abc808112e
Problem: missing test for mouse click + 'virtedit'
Solution: Add test for clicking after eol with 'virtualedit' and wrapped
line
closes: vim/vim#1315746a0582ffa
Problem: :bwipe fails after switching window from aucmd_win.
Solution: Decrement b_nwindows after switching back to aucmd_win.
closes: vim/vim#1316046bdae036a
Problem: make test_compilers fails on ubuntu
Solution: set LC_ALL=C
fix: make test_compiler failed on xubuntu 22.04.3
Problem: 'make test_compiler' failed on Linux xubuntu 22.04.3 but
succeeded on e.g. macOS. To reproduce:
```
$ ./configure --with-features=huge --enable-gui=no --enable-perlinterp=yes
$ make -j12
$ cd vim/src/testdir
$ make test_compiler
...snip...
Found errors in Test_compiler():
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 24: command did not fail: clist
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 30: Pattern '\\n \\d\\+ Xfoo.pl:3: Global symbol "$foo" requires explicit package name' does not match '\n19 Xfoo.pl:3: Global symbol "$foo" requires explicit package name (did you forget to declare "my $foo"?)'
make: *** [Makefile:70: test_compiler] Error 1
```
Solution: set `LC_ALL` to "C" in `Test_compiler()`
closes: vim/vim#13173ca0ffc0d63
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Oldtests clean up after themselves, and the options that need operators
to align with Vim all deny duplicates, so there is no need to set them
to default.
Also make the variable name that test_listchars.vim uses to align with
Vim more obvious.
Problem: :unhide does not check for failing to close a window.
Solution: When closing a window fails continue with the next one. Do not
try closing the autocmd window. (closesvim/vim#9984)
6f2465d336
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Wrong curswant when clicking on empty line or with vsplits.
Solution: Don't check for ScreenCols[] before the start of the window
and handle empty line properly.
closes: vim/vim#1313203cd697d63
patch 9.0.1918: No filetype detection for Authzed filetypes
Problem: No filetype detection for Authzed filetypes
Solution: Detect the *.zed file extension as authzed filetype
closes: vim/vim#131295790a54166
Co-authored-by: Matt Polzin <mpolzin@workwithopal.com>
Problem: r_CTRL-C works differently in visual mode
Solution: Make r_CTRL-C behave consistent in visual mode
in terminal and Windows GUI
in visual mode, r CTRL-C behaves strange in Unix like environments. It
seems to end visual mode, but still is waiting for few more chars,
however it never seems to replace it by any characters and eventually
just returns back into normal mode.
In contrast in Windows GUI mode, r_CTRL-C replaces in the selected area
all characters by a literal CTRL-C.
Not sure why it behaves like this. It seems in the Windows GUI, got_int
is not set and therefore behaves as if any other normal character has
been pressed.
So remove the special casing of what happens when got_int is set and
make it always behave like in Windows GUI mode. Add a test to verify it
always behaves like replacing in the selected area each selected
character by a literal CTRL-C.
closes: vim/vim#13091closes: vim/vim#13112476733f3d0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No runtime support for Mojo
Solution: Add basic filetype and syntax plugins
closes: vim/vim#13062closes: vim/vim#130630ce2c594d0
Co-authored-by: Mahmoud Abduljawad <mahmoud@masaar.com>
Problem: Various Typos
Solution: Fix Typos
This is a collection of typo related commits.
closes: vim/vim#12753closes: vim/vim#13016ee17b6f70d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Co-authored-by: nuid64 <lvkuzvesov@proton.me>
Co-authored-by: Meng Xiangzhuo <aumo@foxmail.com>
Co-authored-by: Dominique Pellé <dominique.pelle@gmail.com>
Problem: missing test for patch 9.0.1873
Solution: add a test trying to exchange windows
Add a test, making sure that switching windows is not allowed when
textlock is active, e.g. when running `:s/<pat>/\=func()/`
18d2709aa1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: CI may fail in test_recover_empty_swap
Solution: Set directory option
Fix failing Test_recover_empty_swap test
:recover by default not only looks in the current directory, but also in
~/tmp for files to recover. If it finds some files to recover, it will
interactively prompt for a file to recover. However, prompting doesn't
work when running the test suite (and even if it would, there is no one
that can answer the prompt).
So it doesn't really make sense during testing, to inspect different
directories for swap files and prompt and wait (which will lead to a
timeout and therefore a failing test).
So set the 'directory' option temporarily to the current directory only
and reset it back once the test finishes.
closes: vim/vim#130381c7397f3f1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Too many delete() calls in tests.
Solution: Use deferred delete where possible.
db77cb3c08
Include test_recover.vim changes only.
Cherry-pick test_recover.vim change from patch 8.2.3637.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
vim-patch:9.0.1866: undo is synced after character find
Problem: Undo is synced after character find.
Solution: Set no_u_sync when calling gotchars_nop().
closes: vim/vim#13022closes: vim/vim#13024dccc29c228
Problem: buffer-overflow in vim_regsub_both()
Solution: Check remaining space
ced2c7394a
The change to do_sub() looks confusing. Maybe it's an overflow check?
Then the crash may not be applicable to Nvim because of different casts.
The test also looks confusing. It seems to source itself recursively.
Also don't call strlen() twice on evaluation result.
N/A patches for version.c:
vim-patch:9.0.1849: CI error on different signedness in ex_cmds.c
vim-patch:9.0.1853: CI error on different signedness in regexp.c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: use-after-free in do_ecmd
Solution: Verify oldwin pointer after reset_VIsual()
e1dc9a6275
N/A patches for version.c:
vim-patch:9.0.1841: style: trailing whitespace in ex_cmds.c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Rexx files may not be recognised
Solution: Add shebang detection and improve disambiguation of *.cls
files
closes: vim/vim#12951e06afb7860
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: 'linebreak' is incorrectly drawn after 'breakindent'.
Solution: Don't include 'breakindent' size when already after it.
closes: vim/vim#12937closes: vim/vim#129401d3e0e8f31
Problem: camel-case spelling has issues with digits
Solution: Improve the camCase spell checking by taking digits
and caps into account
Rewrite the conditions to check for word boundaries by taking into
account the presence of digits and all-caps sequences such as acronyms.
closes: vim/vim#12644closes: vim/vim#12933d08745040b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Cursor position still wrong with 'showbreak' and virtual text
after last character or 'listchars' "eol".
Solution: Remove unnecessary w_wcol adjustment in curs_columns(). Also
fix first char of virtual text not shown at the start of a screen
line.
closes: vim/vim#12478closes: vim/vim#12532closes: vim/vim#129046a3897232a
Problem: wrong cursor position with 'showbreak' and lcs-eol
Solution: Add size of 'showbreak' before when 'listchars' "eol" is used.
Also fix wrong cursor position with wrapping virtual text on
empty line and 'showbreak'.
closes: vim/vim#128911193951beb
Problem: cannot distinguish Forth and Fortran *.f files
Solution: Add Filetype detection Code
Also add *.4th as a Forth filetype
closes: vim/vim#1225119a3bc3add
Don't remove filetype files from Vim patches:
- filetype.vim, script.vim, ft.vim usually contain useful changes
- script.vim and ft.vim don't even have their paths spelled correctly
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Problems when setting bin/paste option
Solution: When setting binary/paste, remember that this also affects
depending options, so that :verbose set returns the right
location.
Mention if depending options for 'binary' or 'paste' have been reset
indirectly. Add a test to verify it works.
Also noticed as small bug, that the global option value for expandtab
was not reset when paste option is set, so fix that while at it.
closes: vim/vim#12837closes: vim/vim#12879757593c07a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: vim/vim#12956closes: vim/vim#126434a8eb6e7a9
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display with wrapping virtual text or unprintable chars,
'showbreak' and 'smoothscroll'.
Solution: Don't skip cells taken by 'showbreak' in screen lines before
"w_skipcol". Combined "n_skip" and "skip_cells".
closes: vim/vim#12597b557f48982
Problem: Using freed memory when 'tagfunc' wipes out buffer that holds
'complete'.
Solution: Make a copy of the option. Make sure cursor position is valid.
0ff01835a4
Cherry-pick a cmdwin change from patch 9.0.0500.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The cursor line number becomes negative when using :z^ in an empty
buffer. (neovim vim/vim#6557)
Solution: Correct the line number. Also reset the column.
a364cdb648
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Typos in tests; one lua line not covered by test.
Solution: Fix typos. Add test case. (Dominique Pellé, closesvim/vim#9994)
81b573d7e5
Cherry-pick test_menu.vim change from patch 9.0.1453.
N/A patch:
vim-patch:8.2.3045: minor typos
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Autocmd test is a bit flaky on MS-Windows.
Solution: Add a bit more sleeping. (Ken Takata, closesvim/vim#11095)
ae04a6049b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: On MS-Windows some tests are flaky.
Solution: Add sleeps, disable swapfile, mark test as flaky. (Ken Takata,
closesvim/vim#11082)
0500e87eba
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: Using separate delete() call instead of writefile() 'D' flag.
Solution: Use the writefile 'D' flag.
3411265a36
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Deleting files in tests is a hassle.
Solution: Use the new 'D' flag of writefile().
e1f3ab73bc
vim-patch:e1f3ab73bc7c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: "for" and "while" not recognized after :vim9cmd and :legacy.
(Emanuele Torre)
Solution: Recognize all the command modifiers. (closesvim/vim#11087)
Add a test to check the list of modifiers.
9132426334
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
e7cda97b6b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When switching window in autocmd the restored cursor position may
be wrong.
Solution: Do not restore the cursor if it was not set. (closesvim/vim#10775)
b03950fafa
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Window title test still fails in some configurations.
Solution: Explicitly set the 'title' option.
1450112eef
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Window title test fails in some configurations.
Solution: Only run the test if the title can be obtained.
a6c09a7c20
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using setbufvar() may change the window title.
Solution: Do not redraw when creating the autocommand window. (closesvim/vim#9613)
dff97e65eb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: CTRL-A does not work properly with the cmdline popup menu.
Solution: Fix issues with CTRL-A. Add more tests for the cmdline popup
menu. Remove TermWait() before VeriryScreenDump(). Refactor the
cmdline popup code. (Yegappan Lakshmanan, closesvim/vim#9735)
560dff49c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Test_xrestore sometimes fails.
Solution: Mark the test as flayky. Move marking test as flaky to the test
instead of listing them in runtest.
f08b0eb869
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for cmdline window and terminal fails on MS-Windows.
Solution: Skip the test on MS-Windows.
0b49648486
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using a terminal popup window from the cmdline window.
Solution: Instead of checking cmdwin_type call cmdwin_is_active().
(closesvim/vim#8286)
e5b4486c42
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests using term_wait() can still be flaky.
Solution: Increase the wait time when rerunning a test. (James McCoy,
closesvim/vim#5899) Halve the initial times to make tests run faster
when there is no rerun.
6a2c5a7dd5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Some tests fail when the system is slow.
Solution: Make the run number global, use in the test to increase the
waiting time. (closesvim/vim#5841)
3ed9efc2b1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Autocmd test fails on a slow system.
Solution: Adjust the expectations. (James McCoy, closesvim/vim#5685)
8fb1b47a5e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Some tests fail when run in the GUI.
Solution: Make sure the window width is enough. In the GUI run terminal Vim
in the terminal, if possible.
3180fe6c6d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: A couple of tests may fail when features are missing.
Solution: Check for features. (Dominique Pelle, closesvim/vim#5561)
705724e430
Just copy the two 'wincolor' test functions from Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: state() test fails on some Mac systems.
Solution: Increase the wait time. (closesvim/vim#4983)
b7a97ef340
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for SafeStateAgain may still fail.
Solution: Send another message to trigger SafeStateAgain.
0f6629a08a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for SafeState and SafeStateAgain may fail.
Solution: Accept more possible responses
513537bfff
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for SafeState and SafeStateAgain.
Solution: Add tests.
cadbe1b1fb
This test is quite useless. Don't port to Lua.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for state().
Solution: Add tests. Clean up some feature checks. Make "a" flag work.
c258549032
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Runtime: no support for bicep files
Solution: Add filetype support for bicepparam
closes: vim/vim#127842d0988ef93
Co-authored-by: Scott McKendry <scott.c.mckendry@gmail.com>
Problem: Runtime: Missing QML support
Solution: Add QML support to Vim
closes: vim/vim#12810bedc69f9d6
Co-authored-by: ChaseKnowlden <haroldknowlden@gmail.com>
Problem: Cursor is adjusted in window that did not change in size by
'splitkeep'.
Solution: Only check that cursor position is valid in a window that
has changed in size.
closes: vim/vim#1250916af913eee
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Problem: no support for custom cmdline completion
Solution: Add new vimscript functions
Add the following two functions:
- getcmdcompltype() returns custom and customlist functions
- getcompletion() supports both custom and customlist
closes: vim/vim#1222892997dda78
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: crash when passing invalid buffer to undotree()
Solution: Use get_buf_arg() instead of tv_get_buf_from_arg().
closes: vim/vim#12862closes: vim/vim#12830ab9f2ecfd4
Problem: Visual highlight not working with cursor at end of screen line
and 'showbreak'.
Solution: Only update "vcol_prev" when drawing buffer text.
closes: vim/vim#128658fc6a1dae0
Problem: can't move to last non-blank char
Solution: Make g<end> behave like that
Make it possible to move to last non-blank char on a line
We can distinguish between g0 and g^ to move to the very first character
and the first non-blank char.
And while we can move to the last screen char, we cannot go to the last
non-blank screen char.
Since I think g$ is the more widely used and known movement command (and
g<end> is synonymous to it) change the behaviour of g<end> to move to
last non-screen char instead and don't have this be the same command as
the g$ command anymore.
If you want to keep the old behaviour, you can use:
```
nnoremap g<end> g$
```
Add a test to verify the behaviour.
closes: vim/vim#12593b5f6fe9ca2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Missing test coverage for blockwise Visual highlight with
virtual that starts with a double-width char.
Solution: Add a new virtual text to the test. Some other small fixes.
closes: vim/vim#12835fc3058495d
Problem: Wrong curswant when clicking and the second cell of a
double-width char.
Solution: Don't copy virtcol of the first char to the second one.
closes: vim/vim#128429994160bfe
Problem: reverse() on string doesn't work in compiled function.
Solution: Accept string in argument type check. (Yegappan Lakshmanan,
closesvim/vim#12377)
f9dc278946
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: reverse() does not work for a String.
Solution: Implement reverse() for a String. (Yegappan Lakshmanan,
closesvim/vim#12179)
03ff1c2dde
vim-patch:9.0.1738: Duplicate code to reverse a string
Problem: Duplicate code to reverse a string
Solution: Move reverse_text() to strings.c and remove string_reverse().
closes: vim/vim#128474dd266cb66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Wrong cursor position when clicking after concealed text
with 'virtualedit'.
Solution: Store virtual columns in ScreenCols[] instead of text
columns, and always use coladvance() when clicking.
This also fixes incorrect curswant when clicking on a TAB, so now
Test_normal_click_on_ctrl_char() asserts the same results as the ones
before patch 9.0.0048.
closes: vim/vim#12808e500ae8e29
Remove the mouse_adjust_click() function.
There is a difference in behavior with the old mouse_adjust_click()
approach: when clicking on the character immediately after concealed
text that is completely hidden, cursor is put on the clicked character
rather than at the start of the concealed text. The new behavior is
better, but it causes unnecessary scrolling in a functional test (which
is an existing issue unrelated to these patches), so adjust the test.
Now fully merged:
vim-patch:9.0.0177: cursor position wrong with 'virtualedit' and mouse click
Problem: cursor position wrong when clicking on an unprintable char
Solution: Don't update prev_ptr when wlv.n_extra is not zero.
closes: vim/vim#12664b25dbb3f9b
Tests only. Code superseded by patch 9.0.1725.
Problem: Cursor in wrong column with mouse click after concealed text.
Solution: Store the text column when drawing text.
b90818867c
Tests only. Code changes moved to the port of patch 9.0.1725.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: screenpos() wrong result with w_skipcol and cpoptions+=n
Solution: Use adjust_plines_for_skipcol() instead of subtracting
w_skipcol.
closes: vim/vim#12625bfe377b8f2
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: vim/vim#12633825cf813fa
