Run the global before_each() before all other before_each(), so that
clear() uses the test ID of the current test, not the previous one.
Don't skip generating test IDs for skipped tests, as that'll make a
skipped test have the same test ID as the previous one.
Problem:
Decoration provider `on_line` handler is invoked for diff filler line
below the last buffer line. This does not match the documentation:
"called for each buffer line".
Solution:
Check `end_fill`.
Problem: when reconfig current float win without win key in nvim_win_set_config will cause float win position changed when move.
Solution: don't relative itself.
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
bd28cae1f1
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
Also close Nvim instance before removing log file, otherwise the Nvim
instance will still write to the log file.
Also adjust log level in libuv_process_spawn(). Ref #27660
Design
- Enable commenting support only through `gc` mappings for simplicity.
No ability to configure, no Lua module, no user commands. Yet.
- Overall implementation is a simplified version of 'mini.comment'
module of 'echasnovski/mini.nvim' adapted to be a better suit for
core. It basically means reducing code paths which use only specific
fixed set of plugin config.
All used options are default except `pad_comment_parts = false`. This
means that 'commentstring' option is used as is without forcing single
space inner padding.
As 'tpope/vim-commentary' was considered for inclusion earlier, here is
a quick summary of how this commit differs from it:
- **User-facing features**. Both implement similar user-facing mappings.
This commit does not include `gcu` which is essentially a `gcgc`.
There are no commands, events, or configuration in this commit.
- **Size**. Both have reasonably comparable number of lines of code,
while this commit has more comments in tricky areas.
- **Maintainability**. This commit has (purely subjectively) better
readability, tests, and Lua types.
- **Configurability**. This commit has no user configuration, while
'vim-commentary' has some (partially as a counter-measure to possibly
modifying 'commentstring' option).
- **Extra features**:
- This commit supports tree-sitter by computing `'commentstring'`
option under cursor, which can matter in presence of tree-sitter
injected languages.
- This commit comments blank lines while 'tpope/vim-commentary' does
not. At the same time, blank lines are not taken into account when
deciding the toggle action.
- This commit has much better speed on larger chunks of lines (like
above 1000). This is thanks to using `nvim_buf_set_lines()` to set
all new lines at once, and not with `vim.fn.setline()`.
Problem:
Some servers don't report progress during initialize unless the client
sets the `workDoneToken`
See https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#initiatingWorkDoneProgress
In particular:
> There is no specific client capability signaling whether a client will
> send a progress token per request. The reason for this is that this is
> in many clients not a static aspect and might even change for every
> request instance for the same request type. So the capability is signal
> on every request instance by the presence of a workDoneToken property.
And:
> Servers can also initiate progress reporting using the
> window/workDoneProgress/create request. This is useful if the server
> needs to report progress outside of a request (for example the server
> needs to re-index a database). The token can then be used to report
> progress using the same notifications used as for client initiated
> progress.
So far progress report functionality was relying entirely on the latter.
Solution:
Set a `workDoneToken`
Closes https://github.com/neovim/neovim/issues/27938
Ref #21393
- Move default user commands to _defaults.lua as that now contains all
kinds of defaults rather than just default mappings and menus.
- Remove the :aunmenu as there are no menus when _defaults.lua is run.
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
`exec_lua` makes code slighly harder to read, so it's beneficial to
remove it in cases where it's possible or convenient.
Not all `exec_lua` calls should be removed even if the test passes as it
changes the semantics of the test even if it happens to pass.
From https://github.com/neovim/neovim/pull/28155#discussion_r1548185779:
"Note for tests like this, which fundamentally are about conversion, you
end up changing what conversion you are testing. Even if the result
happens to be same (as they often are, as we like the rules to be
consistent if possible), you are now testing the RPC conversion rules
instead of the vim script to in-process lua conversion rules."
From https://github.com/neovim/neovim/pull/28155#discussion_r1548190152:
"A test like this specifies that the cursor is valid immediately and not
after a separate cycle of normal (or an other input-processing) mode."
Problem: Normal mode TextChanged isn't tested properly.
Solution: Combine Test_Changed_ChangedI() and Test_Changed_ChangedI_2()
and also run it on Windows. Fix a typo in main.c.
(zeertzjq)
closes: vim/vim#14396c422662933
Problem: Adding a character for incsearch fails at end of line.
Solution: Only check cursor line number.
d4566c14e7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
We start at 100 so we can make the base set larger if needed. (It might need to
grow/shrink as a result of adopting the new default color scheme as the
default for tests)
Usage best illustrataded by example.
Improving the workflow for making new tests with `screen:snapshot_util()` will
be a follow up.
Problem: Filetype test fails.
Solution: Move detection by name before detection by extension.
Improve TextChanged test and remove wrong test and fix
a typo in a comment (zeertzjq).
closes: vim/vim#143738eb7523802
The changes to filetype.vim are N/A since Nvim always prefers filename
matches to extension matches.
Problem: TextChanged autocommand not triggered under some circumstances
(Sergey Vlasov)
Solution: Trigger TextChanged when TextChangedI has not been triggered
fixes: vim/vim#14332closes: vim/vim#143398603270293
Co-authored-by: Christian Brabandt <cb@256bit.org>
Backslashes are valid characters in unix style paths.
Fix the conversion of backslashes to forward slashes in several `vim.fs`
functions when not on Windows. On Windows, backslashes will still be converted
to forward slashes.
Problem: Current behavior of stateful intro message is too persistent.
For example, it is still drawn if new empty buffer is shown in current
window (either by explicitly setting it or after `tabnew`). Although
the buffer is empty, the act of it being shown should be made visible.
Solution: Make intro message persist if all is true:
- Current buffer is the same as it was just after start, i.e. empty
nameless with initial handle (i.e. 1).
- Current window is the same as it was just after start, i.e. single
non-floating with initial handle.
Problem: using win_viewport for implementing smooth scrolling in an external
UI might run into problems when winbar or borders is used, as there is
no indication that the entire grid is not used for scrolled buffer text.
Solution: add `win_viewport_margins` event.
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
b9f5b95b7b
Problem:
LSP basic_finish test modified in #27899 is flaky again after #28030.
Solution:
Run on_setup() immediately after setup using a before_init callback.
Move test cases that are more about treesitter query API rather than
parser API or LanguageTree out of "treesitter/parser_spec", and collect
them in another test suite "treesitter/query_spec".
General refactoring, including:
- Improve whitespace and indentation
- Prefix captures with `@`
- Add more comments on `iter_capture()` tests
- Move `test_query` up closer to the fixture source string
No behavioral changes are made.
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
When the edited file is a symlink, the unexpanded file name is needed to
to achieve the same behavior as the autocommand pattern matching in Vim.
Neither args.file nor args.match are guaranteed to be unexpanded, so use
bufname() instead.
Problem: memleak with ex_drop(), NULL dereference
(zeertzjq)
Solution: revert back to ex_rewind(), use curbuf instead of buf
fixes: vim/vim#14246closes: vim/vim#1425185a769d466
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: vim/vim#14219closes: vim/vim#14220978178823b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: assertion failure in nvim_create_buf if buflist_new autocommands open
a swapfile when "scratch" is set.
Solution: block autocommands when setting up the buffer; fire them later
instead.
Note that, unlike buflist_new, I don't check if autocommands aborted script
processing; the buffer is already created and configured at that point, so might
as well return the handle anyway.
Rather than repeat try_{start,end} and {un}block_autocmds for each relevant
operation, just do it at the start and near the end. This means that, if
TermResponse fires from unblock_autocmds for whatever reason, it can see the
buffer in an already configured state if we didn't bail due to an error (plus
it's probably a bit cleaner this way).
The first describe() block enters terminal mode in before_each(), so
feed_command() at the start of a test case writes it to the terminal
instead of executing it.
Problem:
As mentioned in #23002 on_setup and on_init are run concurrently.
However, in basic_finish tests on_setup must attach the client before
on_init finishes. The other basic_finish test isn't flaky because it
makes an RPC request in on_init.
Solution:
Don't use on_setup in basic_finish tests.
Problem: "NOTE"s, inline Vim script code, and links ending in digits may not be
highlighted correctly within the :Tutor.
Solution: set an explicit value for ":syntax iskeyword" that includes digits. Do
it after ":syntax include"s, so the included syntax/sh.vim doesn't mess with the
value.
Increase screen test width so all text within the conclusion section is visible.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Wrong cursor position when clicking after end of line with
'virtualedit', conceal and virtual text.
Solution: Always fill linebuf_vcol[] for the columns to clear.
There is no test for using 'cursorline' in Normal mode in a terminal
buffer, so add a test and fix 'cursorcolumn' remaining when entering
Terminal mode.
Also move synIDattr() tests to ui/highlight_spec.lua.
Problem: Cursor line is unconcealed when pressing 'r' in Normal mode
when 'concealcursor' contains 'n' but not 'i'.
Solution: Don't check conceal when pressing 'r' in Normal mode.
Vim doesn't have this problem because it doesn't call redrawWinline() in
conceal_check_cursor_line() and instead sets a global variable.
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
