When a terminal application running inside the terminal emulator sets
the cursor shape or blink status of the cursor, update the cursor in the
parent terminal to match.
This removes the "virtual cursor" that has been in use by the terminal
emulator since the beginning. The original rationale for using the
virtual cursor was to avoid having to support additional UI methods to
change the cursor color for other (non-TUI) UIs, instead relying on the
TermCursor and TermCursorNC highlight groups.
The TermCursor highlight group is now used in the default 'guicursor'
value, which has a new entry for Terminal mode. However, the
TermCursorNC highlight group is no longer supported: since terminal
windows now use the real cursor, when the window is not focused there is
no cursor displayed in the window at all, so there is nothing to
highlight. Users can still use the StatusLineTermNC highlight group to
differentiate non-focused terminal windows.
BREAKING CHANGE: The TermCursorNC highlight group is no longer supported.
Problem:
Since e049c6e4c0, most statusline-like UI elements can combine
highlight attrs, except for sign/statuscolumn.
Solution:
Implement for sign/statuscolumn.
Problem: %! item not allowed for 'rulerformat'
(yatinlala)
Solution: also allow to use %! for rulerformat option
(Yegappan Lakshmanan)
fixes: vim/vim#16091closes: vim/vim#16118ac023e8baa
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: curswant not set on gm in folded line
(citizenmatt)
Solution: in a folded line, call update_curswant_force()
fixes: vim/vim#11596closes: vim/vim#11994closes: vim/vim#153989848face74
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: setting 'cmdheight' may cause hit-enter-prompt and echo output
to be missing
Solution: Before cleaning the cmdline, check the need_wait_return flag
(nwounkn)
closes: vim/vim#134322e48567007
Co-authored-by: nwounkn <nwounkn@gmail.com>
Before calling "attach" a screen object is just a dummy container for
(row, col) values whose purpose is to be sent as part of the "attach"
function call anyway.
Just create the screen in an attached state directly. Keep the complete
(row, col, options) config together. It is still completely valid to
later detach and re-attach as needed, including to another session.
Problem: Wrong display when typing in diff mode with 'smoothscroll'.
Solution: Use adjust_plines_for_skipcol() (zeertzjq).
closes: vim/vim#1577647f8584a80
Problem: Window is updated with potentially invalid skipcol in recursive
window update path. I.e. cursor outside of visible range in
large line that does not fit.
Solution: Make sure it is valid (Luuk van Baal).
3d5065fc75
Problem: The matchparen plugin is slow on a long line.
Solution: Don't use a regexp to get char at and before cursor.
(zeertzjq)
Example:
```vim
call setline(1, repeat(' foobar', 100000))
runtime plugin/matchparen.vim
normal! $hhhhhhhh
```
closes: vim/vim#1556881e7513c86
Problem: [security] double-free in dialog_changed()
(SuyueGuo)
Solution: Only clear pointer b_sfname pointer, if it is different
than the b_ffname pointer. Don't try to free b_fname,
set it to NULL instead.
fixes: vim/vim#15403
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-46pw-v7qw-xc2fb29f4abcd4
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security] use-after-free in tagstack_clear_entry
(Suyue Guo )
Solution: Instead of manually calling vim_free() on each of the tagstack
entries, let's use tagstack_clear_entry(), which will
also free the stack, but using the VIM_CLEAR macro,
which prevents a use-after-free by setting those pointers
to NULL
This addresses CVE-2024-41957
Github advisory:
https://github.com/vim/vim/security/advisories/GHSA-f9cr-gv85-hcr48a0bbe7b8a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Some functions are not tested
Solution: Add a few more tests, fix a few minor problems
(Yegappan Lakshmanan)
closes: vim/vim#14789fe424d13ef
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Two placed signs in the same line are not combined. E.g. in the
terminal debugger a breakpoint and the PC cannot be both be
displayed.
Solution: Combine the sign column and line highlight attributes.
a2f6e42ded
Nvim already does this in decor_redraw_signs().
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Modifying a sign no longer updates already placed signs.
Solution: Loop over (newly-exposed) placed decorations when modifying a
sign definition. Update placed decor if it belongs to the sign
that is modified.
Problem: Printed line no longer overwrites colon when pressing Enter in
Ex mode (after 9.1.0573).
Solution: Restore the behavior of pressing Enter in Ex mode.
(zeertzjq)
closes: vim/vim#152587d664bf0eb
Problem: Unnecessary checks for v:sizeoflong in test_put.vim. They are
no longer necessary as patch 8.2.3661 has changed the count to
be within 32-bit integer limit.
Solution: Remove the checks (zeertzjq).
closes: vim/vim#1523969a28f6c08
Problem: Unable to leave long line with 'smoothscroll' and 'scrolloff'.
Corrupted screen near the end of a long line with 'scrolloff'.
(Ernie Rael, after 9.1.0280)
Solution: Only correct cursor in case scroll_cursor_bot() was not itself
called to make the cursor visible. Avoid adjusting for
'scrolloff' beyond the text line height (Luuk van Baal)
b32055e504
vim-patch:9.1.0416: some screen dump tests can be improved
Problem: some screen dump tests can be improved (after 9.1.0414)
Solution: Make sure screen state changes properly and is captured in the
screen dumps (Luuk van Baal)
2e642734f4
Problem: Wrong display with 'smoothscroll' when changing quickfix list.
Solution: Reset w_skipcol when replacing quickfix list (zeertzjq).
closes: vim/vim#14730c7a8eb5ff2
Specifically, functions that are run in the context of the test runner
are put in module `test/testutil.lua` while the functions that are run
in the context of the test session are put in
`test/functional/testnvim.lua`.
Closes https://github.com/neovim/neovim/issues/27004.
Problem: No test that completing a partial mapping clears 'showcmd'.
Solution: Complete partial mappings in Test_showcmd_part_map() instead
of using :echo. Adjust some comments (zeertzjq).
closes: vim/vim#14580094c4390bd
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: vim/vim#14572acdfb8a979
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
bd28cae1f1
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
b9f5b95b7b
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
Problem: Cursor pos wrong when double-width chars are concealed.
Solution: Advance one more virtual column for a double-width char.
Run some tests with both 'wrap' and 'nowrap' (zeertzjq).
closes: vim/vim#14197010e1539d6
Problem: Cursor column wrong with 'virtualedit' and conceal.
Solution: Correct cursor column at end of line if never reached.
(zeertzjq)
closes: vim/vim#14190253ff4dece
Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: vim/vim#1419221b0a3df8c
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: vim/vim#1417749ffb6b428
Problem: When the quickfix buffer has been modified an autocommand
may invalidate the undo stack (kawarimidoll)
Solution: When clearing the quickfix buffer, also wipe the undo stack
fixes: vim/vim#13905closes: vim/vim#13928f0d3d4a426
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Visual highlight hard to read with 'termguicolors'
(Maxim Kim)
Solution: Set Visual GUI foreground to black (with background=light)
and lightgrey (with background=dark)
(Maxim Kim)
fixes: vim/vim#14024closes: vim/vim#1402534e4a05d02
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: upper-case of ß should be U+1E9E (CAPITAL LETTER SHARP S)
(fenuks)
Solution: Make gU, ~ and g~ convert the U+00DF LATIN SMALL LETTER SHARP S (ß)
to U+1E9E LATIN CAPITAL LETTER SHARP S (ẞ), update tests
(glepnir)
This is part of Unicode 5.1.0 from April 2008, so should be fairly safe
to use now and since 2017 is part of the German standard orthography,
according to Wikipedia:
https://en.wikipedia.org/wiki/Capital_%E1%BA%9E#cite_note-auto-12
There is however one exception: UnicodeData.txt for U+00DF
LATIN SMALL LETTER SHARP S does NOT define U+1E9E LATIN CAPITAL LETTER
SHARP S as its upper case version. Therefore, toupper() won't be able
to convert from lower sharp s to upper case sharp s (the other way
around however works, since U+00DF is considered the lower case
character of U+1E9E and therefore tolower() works correctly for the
upper case version).
fixes: vim/vim#5573closes: vim/vim#14018bd1232a1fa
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Visual hl wrong when it ends before multibyte 'showbreak'.
(lacygoil)
Solution: Use vcol_sbr instead of adding n_extra.
(zeertzjq)
fixes: vim/vim#11272closes: vim/vim#13996df23d7f4bd
Bug doesn't apply to Nvim.
Problem: Redrawing can be improved when inserting/deleting lines with 'number'.
Solution: Only redraw the number column of lines below changed lines.
Add a test as this wasn't previously tested.
(zeertzjq)
closes: vim/vim#13985ae07ebc04b
Problem: Modifying a hidden buffer still interferes with prompt buffer
mode changes.
Solution: Save and restore b_prompt_insert.
(zeertzjq)
closes: vim/vim#13875
Modifying hidden buffer still interferes with prompt buffer mode changes
f267847017
