Problem: [security]: overflow with count for :s command
Solution: Abort the :s command if the count is too large
If the count after the :s command is larger than what fits into a
(signed) long variable, abort with e_value_too_large.
Adds a test with INT_MAX as count and verify it correctly fails.
It seems the return value on Windows using mingw compiler wraps around,
so the initial test using :s/./b/9999999999999999999999999990 doesn't
fail there, since the count is wrapping around several times and finally
is no longer larger than 2147483647. So let's just use 2147483647 in the
test, which hopefully will always cause a failure
ac63787734
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Test for expanding "~" in substitute takes too long.
Solution: Disable the test for now.
916d6dd5b1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when expanding "~" in substitute causes very long text.
Solution: Limit the text length to MAXCOL.
ab9a2d884b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Use the XTGETTCAP sequence to determine if the host terminal supports
the OSC 52 sequence and, if it does, enable the OSC 52 clipboard
provider by default.
This is only done automatically when all of the following are true:
1. Nvim is running in the TUI
2. 'clipboard' is not set to unnamed or unnamedplus
3. g:clipboard is unset
4. Nvim is running in an SSH connection ($SSH_TTY is set)
5. Nvim is not running inside tmux ($TMUX is unset)
When writing large amounts of data to the tty it is common to first hide
the cursor to avoid a flickering effect. This has been done in Nvim for
a long time and was implemented in the function that actually flushed
the TUI buffer out to the TTY.
However, when using synchronized updates with the 'termsync' option this
is no longer necessary, as the terminal emulator will buffer all of the
updates and display them atomically. Thus there is no need to toggle the
cursor visibility when flushing the buffer when synchronized updates are
used. In fact, doing so can actually reintroduce cursor flickering in
certain scenarios because the visibility state is itself being
synchronized by the terminal.
In addition, the management of the cursor visibility should not happen
when the TUI _buffer_ is flushed, but rather when the TUI itself is
flushed. This is a subtle but meaningful distinction: the former
literally writes bytes to the TTY while the latter flushes the TUI's
grid into its buffer. There is no need to hide the cursor every time we
write bytes to the TTY, only at the beginning of a full TUI "flush"
event.
This fixes an error that can occur in certain pathological cases when
the autocommand fires at just the right time such that it attempts to
close the timer after the timer has already exited, but before the
scheduled callback has fired.
We now let the timer continue to run even when the autocommand deletes
itself to avoid having to repeat the cleanup code multiple times. There
is no harm in letting the timer execute if the autocommand does not
exist, as the pcall will catch the error.
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: vim/vim#13533bc8f79d36a
Co-authored-by: rhysd <lin90162@yahoo.co.jp>
The 'termsync' option enables a mode (provided the underlying terminal
supports it) where all screen updates during a redraw cycle are buffered
and drawn together when the redraw is complete. This eliminates tearing
or flickering in cases where Nvim redraws slower than the terminal
redraws the screen.
Problem:
Platform-specific UI providers should live in `vim.ui.*`. #24164
Solution:
- Move `vim.clipboard.osc52` module to `vim.ui.clipboard.osc52`.
- TODO: move all of `clipboard.vim` to `vim.ui.clipboard`.
ref #25872
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
If Nvim is in the process of exiting then we do not want to allocate any
new refs onto the event loop, because they will not be freed and will
result in a memory leak.
libtermkey does not interpret OSC sequences that end with a BEL (0x07)
instead of an ST (0x1b 0x5c) terminator. This causes these tests to fail
since the OSC response is now parsed via libtermkey. Change the tests to
use the ST terminator to appease libtermkey.
Problem:
Numerous Vim 8.1 patches are listed by `vim-patch.sh -l`.
Solution:
Mark the following patches as N/A:
obviated by $NVIM env var:
vim-patch:8.1.0049 shell cannot tell running in a terminal window
vim-patch:8.1.0050 $VIM_TERMINAL is also set when not in a terminal window
'termwinkey' is not supported by Nvim:
vim-patch:8.1.0072 use of 'termwinkey' is inconsistent
Nvim handles STOP signal via libuv:
vim-patch:8.1.0304 no redraw when using a STOP signal on Vim and then CONT
vim-patch:8.1.0312 wrong type for flags used in signal handlers
Nvim does not have `parse_queued_messages`:
vim-patch:8.1.0367 getchar(1) no longer processes pending messages
N/A various:
vim-patch:8.1.1396 'wincolor' does not apply to lines below the buffer
vim-patch:8.1.1502 cannot play any sound
vim-patch:8.1.1515 memory leak reported for sound when build with EXITFREE
Nvim has extmarks instead of textprops:
vim-patch:8.1.0579 cannot attach properties to text
vim-patch:8.1.0582 text properties are not enabled
vim-patch:8.1.0634 text properties cannot cross line boundaries
vim-patch:8.1.0638 text property highlighting is off by one column
vim-patch:8.1.0639 text properties test fails on MS-Windows
vim-patch:8.1.0643 computing byte offset wrong
vim-patch:8.1.0654 when deleting a line text property flags are not adjusted
vim-patch:8.1.0655 when appending a line text property flags are not added
vim-patch:8.1.0663 text property display wrong when 'number' is set
vim-patch:8.1.0665 text property display wrong when 'spell' is set
vim-patch:8.1.0667 textprop test leaves file behind
vim-patch:8.1.0675 text property column in screen columns is not practical
vim-patch:8.1.0676 textprop screendump test fails
vim-patch:8.1.0681 text properties as not adjusted for deleted text
vim-patch:8.1.0682 text properties not adjusted when backspacing replaced text
vim-patch:8.1.0688 text properties are not restored by undo
vim-patch:8.1.0689 undo with text properties not tested
vim-patch:8.1.0690 setline() and setbufline() do not clear text properties
vim-patch:8.1.0691 text properties are not adjusted for :substitute
vim-patch:8.1.0694 when using text props may free memory that is not allocated
vim-patch:8.1.0703 compiler warnings with 64-bit compiler
vim-patch:8.1.0707 text property columns are not adjusted for changed indent
vim-patch:8.1.0970 text properties test fails when 'encoding' is not utf-8
vim-patch:8.1.1035 prop_remove() second argument is not optional
vim-patch:8.1.1276 cannot combine text properties with syntax highlighting
vim-patch:8.1.1278 missing change for "combine" field
vim-patch:8.1.1333 text properties don't always move after changes
vim-patch:8.1.1337 get empty text prop when splitting line just after text prop
vim-patch:8.1.1341 text properties are lost when joining lines
vim-patch:8.1.1343 text properties not adjusted for Visual block mode delete
vim-patch:8.1.1340 attributes from 'cursorline' overwrite textprop
vim-patch:8.1.1351 text property wrong after :substitute
vim-patch:8.1.1359 text property wrong after :substitute with backslash
vim-patch:8.1.1387 calling prop_add() in an empty buffer doesn't work
vim-patch:8.1.1388 errors when calling prop_remove() for an unloaded buffer
vim-patch:8.1.1463 gcc warns for uninitialized variable
N/A Nvim has buf_attach instead of "listeners":
vim-patch:8.1.1320 it is not possible to track changes to a buffer
vim-patch:8.1.1321 no docs or tests for listener functions
vim-patch:8.1.1326 no test for listener with partial
vim-patch:8.1.1328 no test for listener with undo operation
vim-patch:8.1.1332 cannot flush listeners without redrawing, mix of changes
vim-patch:8.1.1335 listener callback is called after inserting text
vim-patch:8.1.1419 listener callbacks may be called recursively
vim-patch:8.1.1486 a listener change is merged even when it adds a line
N/A build issues:
vim-patch:8.1.0601 a few compiler warnings
vim-patch:8.1.0612 cannot use two global runtime dirs with configure
vim-patch:8.1.0684 warnings from 64-bit compiler
vim-patch:8.1.1344 Coverity complains about possibly using a NULL pointer
vim-patch:8.1.1376 warnings for size_t/int mixups
vim-patch:8.1.1414 alloc() returning "char_u *" causes a lot of type casts
vim-patch:8.1.1508 sound keeps failing on Travis
vim-patch:8.1.1494 build failure
N/A terminal / job control patches:
vim-patch:8.1.0761 default value for brief_wait is wrong
vim-patch:8.1.0824 SunOS/Solaris has a problem with ttys
vim-patch:8.1.0845 having job_status() free the job causes problems
vim-patch:8.1.0870 Vim doesn't use the new ConPTY support in Windows 10
vim-patch:8.1.0880 MS-Windows: inconsistent selection of winpty/conpty
vim-patch:8.1.0890 pty allocation wrong if using file for out channel
vim-patch:8.1.0906 using clumsy way to get console window handle
vim-patch:8.1.0909 MS-Windows: using ConPTY even though it is not stable
vim-patch:8.1.0928 stray log function call
vim-patch:8.1.0940 MS-Windows console resizing not handled properly
vim-patch:8.1.1028 MS-Windows: memory leak when creating terminal fails
vim-patch:8.1.1265 when GPM mouse support is enabled double clicks do not work
vim-patch:8.1.1267 cannot check if GPM mouse support is working
N/A encoding patches:
vim-patch:8.1.0879 MS-Windows: temp name encoding can be wrong
vim-patch:8.1.0895 MS-Windows: dealing with temp name encoding not quite right
vim-patch:8.1.0918 MS-Windows: startup messages are not converted
vim-patch:8.1.1090 MS-Windows: modify_fname() has problems with some 'encoding'
N/A platform patches:
vim-patch:8.1.1103 MS-Windows: old API calls are no longer needed
N/A Lua patches:
vim-patch:8.1.1019 Lua: may garbage collect function reference in use
N/A Nvim has floating windows instead of popup window:
vim-patch:8.1.1329 plans for popup window support are spread out
vim-patch:8.1.1364 design for popup window support needs more details
vim-patch:8.1.1391 no popup window support
vim-patch:8.1.1400 using global pointer for tab-local popups is clumsy
vim-patch:8.1.1399 popup windows not adjusted when switching tabs
vim-patch:8.1.0062 popup menu broken if a callback changes the window layout
vim-patch:8.1.1405 "highlight" option of popup windows not supported
vim-patch:8.1.1406 popup_hide() and popup_show() not implemented yet
vim-patch:8.1.1407 popup_create() does not support text properties
vim-patch:8.1.1410 popup_move() is not implemented yet
vim-patch:8.1.1402 "timer" option of popup windows not supported
vim-patch:8.1.1408 PFL_HIDDEN conflicts with system header file
vim-patch:8.1.1420 popup window size only uses first line length
vim-patch:8.1.1421 drawing "~" line in popup window
vim-patch:8.1.1422 popup_getoptions() not implemented yet
vim-patch:8.1.1423 popup windows use options from current window and buffer
vim-patch:8.1.1426 no test for syntax highlight in popup window
vim-patch:8.1.1427 popup window screenshot test fails
vim-patch:8.1.1428 popup_atcursor() not implemented yet
vim-patch:8.1.1429 "pos" option of popup window not supported yet
vim-patch:8.1.1430 popup window option "wrap" not supported
vim-patch:8.1.1431 popup window listed as "Scratch"
vim-patch:8.1.1432 can't build with eval feature
vim-patch:8.1.1438 some commands cause trouble in a popup window
vim-patch:8.1.1441 popup window filter not yet implemented
vim-patch:8.1.1442 popup windows not considered when the Vim window is resized
vim-patch:8.1.1443 popup window padding and border not implemented yet
vim-patch:8.1.1444 not using double line characters for popup border
vim-patch:8.1.1445 popup window border highlight not implemented yet
vim-patch:8.1.1446 popup window callback not implemented yet
vim-patch:8.1.1447 not allowed to create an empty popup
vim-patch:8.1.1448 statusline is sometimes drawn on top of popup
vim-patch:8.1.1449 popup text truncated at end of screen
vim-patch:8.1.1450 popup window positioning wrong when using padding or borders
vim-patch:8.1.1451 CTRL-L does not clear screen with a popup window
vim-patch:8.1.1452 line and col property of popup windows not properly checked
vim-patch:8.1.1453 popup window "moved" property not implemented yet
vim-patch:8.1.1455 popup_atcursor() not completely implemented
vim-patch:8.1.1459 popup window border looks bad when 'ambiwidth' is "double"
vim-patch:8.1.1460 popup window border characters may be wrong
vim-patch:8.1.1416 popup_getposition() not implemented yet
vim-patch:8.1.1493 redrawing with popups is slow and causes flicker
vim-patch:8.1.1496 popup window height is not recomputed
vim-patch:8.1.1499 ruler not updated after popup window was removed
vim-patch:8.1.1511 matches in a popup window are not displayed properly
vim-patch:8.1.1513 all popup functionality is in functions, except :popupclear
vim-patch:8.1.1517 when a popup changes all windows are redrawn
vim-patch:8.1.1518 crash when setting 'columns' while a popup is visible
vim-patch:8.1.1520 popup windows are ignored when dealing with mouse position
vim-patch:8.1.1521 when a popup window is closed the buffer remains
vim-patch:8.1.1522 poup_notification() not implemented yet
vim-patch:8.1.1495 memory access error
vim-patch:8.1.1497 accessing memory beyond allocated space
N/A already applied:
vim-patch:8.1.1226 {not in Vi} remarks get in the way of useful help text
vim-patch:8.1.1280 remarks about functionality not in Vi clutters the help
Problem: Text properties test fails when 'encoding' is not utf-8.
Solution: Compare with original value of 'encoding'. (Christian Brabandt,
closesvim/vim#3986)
ed79d1e348
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Running tests may leave some files behind.
Solution: Delete the right files. Fix a few typos. (Dominique Pellé,
closesvim/vim#7436ac665c24c9
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot set a directory for a tab page.
Solution: Add the tab-local directory. (Yegappan Lakshmanan, closesvim/vim#4212)
00aa069db8
Session-related changes only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim doesn't use the new ConPTY support in Windows 10.
Solution: Use ConPTY support, if available. (Nobuhiro Takasaki, closesvim/vim#3794)
aa5df7e312
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Terminal windows in a session are not properly restored.
Solution: Add "terminal" in 'sessionoptions'. When possible restore the
command running in a terminal.
4d8bac8bf5
Tests only. Nvim has no equivalent to "norestore" yet.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
