- Consistently use the variable CMAKE_BUILD_TYPE to select build type.
- Remove broken `doc_html` target.
- Remove swap files created by oldtest when cleaning.
- Only rerun `lintdoc` if any documentation files has changed.
Problem: Crash when using gettabwinvar() with invalid arguments. (Yilin
Yang)
Solution: Use "curtab" if "tp" is NULL. (closesvim/vim#5475)
ee93b737aa
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Segfault with CompleteChanged autocommand
(markonm )
Solution: Test match->cp_prev for being NULL before accessing it
closes: vim/vim#13929fef6630166
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Recorded register cannot be translated using keytrans() when
it involves character search (iddqd505)
Solution: Record a K_IGNORE instead of a K_NOP (zeertzjq)
related: vim/vim#13916closes: vim/vim#13925bf321806bf
Problem: E95 is possible if a buffer called "[Command Line]" already
exists when opening the cmdwin. This can also happen if the
cmdwin's buffer could not be deleted when closing.
Solution: Un-name the cmdwin buffer, and give it a special name instead,
similar to what's done for quickfix buffers and for unnamed
prompt and scratch buffers. As a result, BufFilePre/Post are
no longer fired when opening the cmdwin. Add a "command" key
to the dictionary returned by getbufinfo() to differentiate
the cmdwin buffer instead. (Sean Dewar)
Cherry-pick test_normal changes from v9.0.0954.
1fb4103206
Problem: Autocmds triggered from opening the cmdwin (in win_split and
do_ecmd) can cause issues such as E199, as the current checks
are insufficient.
Solution: Commands executed from the cmdwin apply to the old curwin/buf,
so they should be kept in a "suspended" state; abort if
they've changed. Also abort if cmdwin/buf was tampered with,
and check that curwin is correct. Try to clean up the cmdwin
buffer (only if hidden and non-current to simplify things; the
same approach is used when closing cmdwin normally), and add a
beep. (Sean Dewar)
Rename the old Test_cmdwin_interrupted() like in the patch (can be moved to
test_cmdwin.vim when v9.0.0027 is ported).
Move the error message to `e_active_window_or_buffer_changed_or_deleted`.
43b395ec2e
Problem: Things that temporarily change/restore curwin/buf (e.g:
win_execute, some autocmds) may break assumptions that
curwin/buf is the cmdwin when "cmdwin_type != 0", causing
issues.
Solution: Expose the cmdwin's real win/buf and check that instead. Also
try to ensure these variables are NULL if "cmdwin_type == 0",
allowing them to be used directly in most cases without
checking cmdwin_type. (Sean Dewar)
Reset and save `cmdwin_old_curwin` in a similar fashion.
Apply suitable changes for API functions and add Lua tests.
988f74311c
Problem: Cannot map Super Keys in GTK UI
(Casey Tucker)
Solution: Enable Super Key mappings in GTK using <D-Key>
(Casey Tucker)
As a developer who works in both Mac and Linux using the same keyboard,
it can be frustrating having to remember different key combinations or
having to rely on system utilities to remap keys.
This change allows `<D-z>` `<D-x>` `<D-c>` `<D-v>` etc. to be recognized
by the `map` commands, along with the `<D-S-...>` shifted variants.
```vimrc
if has('gui_gtk')
nnoremap <D-z> u
nnoremap <D-S-Z> <C-r>
vnoremap <D-x> "+d
vnoremap <D-c> "+y
cnoremap <D-v> <C-R>+
inoremap <D-v> <C-o>"+gP
nnoremap <D-v> "+P
vnoremap <D-v> "-d"+P
nnoremap <D-s> :w<CR>
inoremap <D-s> <C-o>:w<CR>
nnoremap <D-w> :q<CR>
nnoremap <D-q> :qa<CR>
nnoremap <D-t> :tabe<CR>
nnoremap <D-S-T> :vs#<CR><C-w>T
nnoremap <D-a> ggVG
vnoremap <D-a> <ESC>ggVG
inoremap <D-a> <ESC>ggVG
nnoremap <D-f> /
nnoremap <D-g> n
nnoremap <D-S-G> N
vnoremap <D-x> "+x
endif
```
closes: vim/vim#1269892e90a1e10
Co-authored-by: Casey Tucker <dctucker@hotmail.com>
Problem: Incorrect number of trailing spaces inserted for multibyte
characters when pasting a blockwise register in blockwise visual
mode (VanaIgr)
Solution: Skip over trailing UTF-8 bytes when computing the number of trailing
spaces (VanaIgr)
When pasting in blockwise visual mode, and the register type is <CTRL-V>, Vim
aligns the text after the replaced area by inserting spaces after pasted
lines that are shorter than the longest line. When a shorter line contains
multibyte characters, each trailing UTF-8 byte's width is counted in addition
to the width of the character itself. Each trailing byte counts as being 4
cells wide (since it would be displayed as <xx>).
closes: vim/vim#139096638ec8afa
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Problem: 'linebreak' may still apply to leading whitespace
(VanaIgr)
Solution: Compare pointers instead of virtual columns.
(zeertzjq)
related: #27180closes: vim/vim#13915703f9bc943
Co-authored-by: VanaIgr <vanaigranov@gmail.com>
Problem: :drop does not re-use empty buffer
(Rocco Mao)
Solution: Make :drop re-use an empty buffer
(Rocco Mao)
fixes: vim/vim#13851closes: vim/vim#13881f96dc8d07f
Co-authored-by: Rocco Mao <dapeng.mao@qq.com>
Problem: ml_get: invalid lnum when :s replaces visual selection
(@ropery)
Solution: substitute may decrement the number of lines in a buffer,
so validate, that the bottom lines of the visual selection
stays within the max buffer line
fixes: vim/vim#13890closes: vim/vim#138927c71db3a58
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Missing test for Chuck filetype
after commit 27a4632af6753
(Christian Clason)
Solution: Add a filetype test
c1884c94c5
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Sharing queries with upstream and Helix is difficult due to
different capture names.
Solution: Define and document a new set of standard captures that
matches tree-sitter "standard captures" (where defined) and is closer to
Helix' Atom-style nested groups.
This is a breaking change for colorschemes that defined highlights based
on the old captures. On the other hand, the default colorscheme now
defines links for all standard captures (not just those used in bundled
queries), improving the out-of-the-box experience.
Problem: Modifying a hidden buffer still interferes with prompt buffer
mode changes.
Solution: Save and restore b_prompt_insert.
(zeertzjq)
closes: vim/vim#13875
Modifying hidden buffer still interferes with prompt buffer mode changes
f267847017
Problem: too vague errors for 'listchars'/'fillchars'
Solution: Include the field name in error message.
(zeertzjq)
related: #27050closes: vim/vim#138776a8d2e1634
Co-authored-by: Cole Frankenhoff <cole.nhf@gmail.com>
Problem: Insert mode not stopped if an autocommand modifies a hidden
buffer while closing a prompt buffer.
Solution: Don't set b_prompt_insert if stop_insert_mode is already set.
(zeertzjq)
closes: vim/vim#1387296958366ad
* vim-patch:9.1.0035: i_CTRL-] triggers InsertCharPre
Problem: i_CTRL-] triggers InsertCharPre
Solution: Return if CTRL-] is received. InsertCharPre
is supposed to be only used for chars to be inserted
but i_CTRL-] triggers expansion and is not inserted
into the buffer (altermo)
closes: vim/vim#13853closes: vim/vim#138647d711fe209
Problem: Modula2 filetype support lacking
Solution: Improve the Modula-2 runtime support, add additional modula2
dialects, add compiler plugin, update syntax highlighting,
include syntax tests, update Makefiles (Doug Kearns)
closes: vim/vim#6796closes: vim/vim#811568a8947069
- Luaify the detection script:
- Split the `(*!m2foo*)` and `(*!m2foo+bar*)` detection into two Lua patterns,
as Lua capture groups cannot be used with `?` and friends (as they only work
on character classes).
- Use `vim.api.nvim_buf_call()` (ew) to call `modula2#SetDialect()` to ensure
`b:modula2` is set for the given bufnr.
- Skip the syntax screendump tests. (A shame as they test some of the detection
from `(*!m2foo+bar*)` tags, but I tested this locally and it seems to work)
- Port the synmenu.vim changes from Vim9 script. (Also tested this locally)
- (And also add the missing comma for `b:browsefilter` from earlier.)
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Vim is missing a foreach() func
Solution: Implement foreach({expr1}, {expr2}) function,
which applies {expr2} for each item in {expr1}
without changing it (Ernie Rael)
closes: vim/vim#12166e79e207760
Partial port as this doesn't handle non-materialized range() lists.
vim-patch:c92b8bed1fa6
runtime(help): delete duplicate help tag E741 (vim/vim#13861)
c92b8bed1f
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Cannot easily get the list of matches
Solution: Add the matchstrlist() and matchbufline() Vim script
functions (Yegappan Lakshmanan)
closes: vim/vim#13766
Omit CHECK_LIST_MATERIALIZE(): it populates a List with numbers only,
and there is a check for strings below.
f93b1c881a
vim-patch:eb3475df0d92
runtime(doc): Replace non-breaking space with normal space (vim/vim#13868)
eb3475df0d
Co-authored-by: Yegappan Lakshmanan <4298407+yegappan@users.noreply.github.com>
Problem: i_CTRL-R- doesn't work for multibyte chars in Replace mode,
Coverity complains missing return value for u_save_cursor()
Solution: Use mb_charlen() and del_chars() instead, handle failure mode
for u_save_cursor() correctly (@zeertzjq)
closes: vim/vim#13846424ec1f235
Problem: i_CTRL-R- no longer works in replace mode
Solution: delete characters in replace mode before putting, add a test,
add a bit warning into the documentation, that i_CTRL-R-P/O
is not supported in Replace mode for now
fixes: vim/vim#13792closes: vim/vim#138165d5cbb2b9a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Deleted lines go to wrong yank register.
Solution: Reset y_append when not calling get_yank_register(). (Christian
Brabandt, closesvim/vim#8872)
78eb9cce91
Nvim has removed y_append static variable and already works as expected.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: default diff highlighting is too noisy
Solution: Link diff highlighting groups to new
Added/Removed/Changed, revert previous change
(Romain Lafourcade)
Remove diff* links added in vim/vim#13776 and doc added in commit b1392be
The links added in vim/vim#13776 are way too noisy for the contexts in which
the `diff` syntax is applied (git commits, patches, etc.).
This commit:
- removes those links
- adds new default highlighting groups Added, Changed and
Removed
- links the diff highlighting groups to those new defaults
- removes the doc changes
- adjusts the syntax_completion test for those newly added group
names
Note: Changes to the default color schemes will be handled separately,
by adding links to those newly created Added/Removed/Changed
highlighting groups.
related: vim/vim#13776closesvim/vim#13825124371c5a1
Co-authored-by: Romain Lafourcade <romain.lafourcade@razorfish.fr>
Problem: regexp cannot match combining chars in collection
Solution: Check for combining characters in regex collections for the
NFA and BT Regex Engine
Also, while at it, make debug mode work again.
fixesvim/vim#10286closes: vim/vim#12871d2cc51f9a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: regression with empty inner blocks introduced
(after v9.1.0007)
Solution: Set correct cursor position, Check for visual mode
being active (Maxim Kim)
relates: vim/vim#13514closes: vim/vim#138193779516988
Co-authored-by: Maxim Kim <habamax@gmail.com>
Problem: can select empty inner text blocks
(laurentalacoque)
Solution: make selecting empty inner text blocks an error
textobjects: Make selecting inner empty blocks an error
fixes: vim/vim#13514closes: vim/vim#13523ad4d7f446d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Keymap completion is not available
Solution: Add keymap completion (Doug Kearns)
Add keymap completion to the 'keymap' option, user commands and builtin
completion functions.
closes: vim/vim#1369281642d9d6f
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Avoid `prevwin == curwin` when closing `curwin`
Problem: When closing the current window (or when moving it to a tabpage), the
previous window may refer to the new current window
(`winnr() == winnr('#')`) if that window is selected as the
new current window.
Solution: Set `prevwin = NULL` when switching away from an invalid `curwin` and
the target window was the `prevwin`.
(Sean Dewar)
related: vim/vim#4537closes: vim/vim#13762bf44b69d1f
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: a closing fold expression may unexpectedly start a new fold
when it should end a fold
(reported by Shota Nozaki)
Solution: if a fold hasn't started yet, do not immediately
start a new fold with level 1
(Shota Nozaki)
fixes: vim/vim#12768closes: vim/vim#137480689b87059
Co-authored-by: Shota Nozaki <emonkak@gmail.com>
Problem: cursor wrong after { in single line buffer
(Edwin Chan)
Solution: do not place the cursor at the end for a single
line buffer when moving backwards
(Gary Johnson)
closes: vim/vim#13780closes: vim/vim#137839e6549d2fb
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: Visual selection isn't drawn with 'breakindent' when the line
doesn't fit in the window (Jaehwang Jung)
Solution: Adjust wlv->fromcol also for 'breakindent' (zeertzjq)
closes: vim/vim#13767closes: vim/vim#1376823627722d3
Problem: no filetype detection for execline scripts
Solution: Add filetype detection for execline
as a prior to adding syntax support for execline (see
https://github.com/djpohly/vim-execline/issues/2), i went ahead and made
the filetype detection for execline scripts.
closes: vim/vim#13689
Signed-Off-By: Mazunki Hoksaas <rolferen@gmail.com>
63210c214a
Co-authored-by: Mazunki Hoksaas <rolferen@gmail.com>
Problem: Wrong cursor position when dragging out of window.
Solution: Don't use ScreenCols[] when mouse is not in current window.
closes: vim/vim#13717ec14924368
Problem: reg_executing() returns wrong result in :normal with range
when 'showcmd' is set (after 8.2.4705).
Solution: Reset "pending_end_reg_executing" when executing a register.
closes: vim/vim#13707615202bd0e
Problem: Moving tabpages on :drop may cause an endless loop
Solution: Disallow moving tabpages on :drop when cleaning up the arglist
first
Moving tabpages during drop command may cause an endless loop
When executing a :tab drop command, Vim will close all windows not in
the argument list. This triggers various autocommands. If a user has
created an 'au Tabenter * :tabmove -' autocommand, this can cause Vim to
end up in an endless loop, when trying to iterate over all tabs (which
would trigger the tabmove autocommand, which will change the tpnext
pointer, etc).
So instead of blocking all autocommands before we actually try to edit
the given file, lets simply disallow to move tabpages around. Otherwise,
we may change the expected number of events triggered during a :drop
command, which users may rely on (there is actually a test, that expects
various TabLeave/TabEnter autocommands) and would therefore be a
backwards incompatible change.
Don't make this an error, as this could trigger several times during the
drop command, but silently ignore the :tabmove command in this case (and
it should in fact finally trigger successfully when loading the given
file in a new tab). So let's just be quiet here instead.
fixes: vim/vim#13676closes: vim/vim#13686df12e39b8b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: We have `P_(BOOL|NUM|STRING)` macros to represent an option's type, which is redundant because `OptValType` can already do that. The current implementation of option type flags is also too limited to allow adding multitype options in the future.
Solution: Remove `P_(BOOL|NUM|STRING)` and replace it with a new `type_flags` attribute in `vimoption_T`. Also do some groundwork for adding multitype options in the future.
Side-effects: Attempting to set an invalid keycode option (e.g. `set t_foo=123`) no longer gives an error.
Problem: The options[] array is not sorted alphabetically.
Solution: Sort it alphabetically. Add a test. Avoid unnecessary loop
iterations in findoption().
closes: vim/vim#13648
Cherry-pick Test_set_one_column() change from patch 8.2.0432.
f48558e10a
Problem: Confusing error for missing key.
Solution: Use the actualy key for the error. (closesvim/vim#9241)
5c1ec439f0
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'breakindent' is not drawn after diff filler lines.
Solution: Correct check for whether 'breakindent' should be drawn.
closes: vim/vim#13624588f20dece
Cherry-pick Test_diff_with_syntax() change from patch 9.0.1257.
Problem: Vim does not detect pacman.log file
Solution: Detect pacmanlogs and add syntax highlighting
pacman.log is a filetype common to Arch Liux and related distributions.
Add some simple syntax highlighting for the pacmanlog filetype.
closes: vim/vim#136181e5d66408e
Co-authored-by: Ronan Pigott <ronan@rjp.ie>
Problem: Wrong scrolling in Insert mode with 'smoothscroll' at the
bottom of the window.
Solution: Don't use set_topline() when 'smoothscroll' is set.
fixes: vim/vim#13612closes: vim/vim#136135b4d1fcbf0
Problem: Default color scheme is suboptimal.
Solution: Start using new color scheme. Introduce new `vim` color scheme
for opt-in backward compatibility.
------
Main design ideas
- Be "Neovim branded".
- Be minimal for 256 colors with a bit more shades for true colors.
- Be accessible through high enough contrast ratios.
- Be suitable for dark and light backgrounds via exchange of dark and
light palettes.
------
Palettes
- Have dark and light variants. Implemented through exporeted
`NvimDark*` and `NvimLight*` hex colors.
- Palettes have 4 shades of grey for UI elements and 6 colors (red,
yellow, green, cyan, blue, magenta).
- Actual values are computed procedurally in Oklch color space based on
a handful of hyperparameters.
- Each color has a 256 colors variant with perceptually closest color.
------
Highlight groups
Use:
- Grey shades for general UI according to their design.
- Bold text for keywords (`Statement` highlight group). This is an
important choice to increase accessibility for people with color
deficiencies, as it doesn't rely on actual color.
- Green for strings, `DiffAdd` (as background), `DiagnosticOk`, and some
minor text UI elements.
- Cyan as main syntax color, i.e. for function usage (`Function`
highlight group), `DiffText`, `DiagnosticInfo`, and some minor text UI
elements.
- Red to generally mean high user attention, i.e. errors; in particular
for `ErrorMsg`, `DiffDelete`, `DiagnosticError`.
- Yellow very sparingly only with true colors to mean mild user
attention, i.e. warnings. That is, `DiagnosticWarn` and `WarningMsg`.
- Blue very sparingly only with true colors as `DiagnosticHint` and some
additional important syntax group (like `Identifier`).
- Magenta very carefully (if at all).
------
Notes
- To make tests work without relatively larege updates, each one is
prepended with an equivalent of the call `:colorscheme vim`.
Plus some tests which spawn new Neovim instances also now use 'vim'
color scheme.
In some cases tests are updated to fit new default color scheme.
Problem: [security]: buffer-overflow in ex_substitute
Solution: clear memory after allocating
When allocating the new_start pointer in ex_substitute() the memory
pointer points to some garbage that the following for loop in
ex_cmds.c:4743 confuses and causes it to accessing the new_start pointer
beyond it's size, leading to a buffer-overlow.
So fix this by using alloc_clear() instead of alloc(), which will
clear the memory by NUL and therefore cause the loop to terminate
correctly.
Reported by @henices, thanks!
closes: vim/vim#13596abfa13ebe9
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: stack-buffer-overflow in option callback functions
Solution: pass size of errbuf down the call stack, use snprintf()
instead of sprintf()
We pass the error buffer down to the option callback functions, but in
some parts of the code, we simply use sprintf(buf) to write into the error
buffer, which can overflow.
So let's pass down the length of the error buffer and use sprintf(buf, size)
instead.
Reported by @henices, thanks!
b39b240c38
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: buffer-overflow in suggest_trie_walk
Solution: Check n before using it as index into byts array
Basically, n as an index into the byts array, can point to beyond the byts
array. So let's double check, that n is within the expected range after
incrementing it from sp->ts_curi and bail out if it would be invalid.
Reported by @henices, thanks!
0fb375aae6
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free in win-enter
Solution: validate window pointer before calling win_enter()
win_goto() may stop visual mode, if it is active. However, this may in
turn trigger the ModeChanged autocommand, which could potentially free
the wp pointer which was valid before now became stale and points to now
freed memory.
So before calling win_enter(), let's verify one more time, that the
wp pointer still points to a valid window structure.
Reported by @henices, thanks!
eec0c2b3a4
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: html.angular ft is problematic
Solution: partly revert v9.0.2137
The html.angular filetype causes issues and does not trigger FileType
autocommands for the html or angular filetypes.
So let's roll back that particular change and detect this only as html
file
related: https://github.com/vim/vim/pull/13594#issuecomment-1834465890closes: vim/vim#136044f3480c943
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: ml_get error when scrolling after delete
Solution: mark topline to be validated in main_loop
if it is larger than current buffers line
count
reset_lnums() is called after e.g. TextChanged autocommands and it may
accidentally cause curwin->w_topline to become invalid, e.g. if the
autocommand has deleted some lines.
So verify that curwin->w_topline points to a valid line and if not, mark
the window to have w_topline recalculated in main_loop() in
update_topline() after reset_lnums() returns.
fixes: vim/vim#13568fixes: vim/vim#13578c4ffeddfe5
The error doesn't happen in Nvim because Nvim triggers TextChanged after
calling update_topline().
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No test for mode() when executing Ex commands
Solution: Add some test cases and simplify several other test cases.
Also add a few more test cases for ModeChanged.
closes: vim/vim#13588fcaeb3d42b
Problem: not all nushell files detected
Solution: use *.nu to detect nushell files
closes: vim/vim#13586b9efc72c24
Co-authored-by: Daniel Buch Hansen <boogiewasthere@gmail.com>
Add syntax and filetype plugins for SWIG (Simplified Wrapper Interface
Generator) description files.
The default syntax for .i files highlights comments in a reverse
color scheme which doesn't look well. This syntax builds
on vim's c++ syntax by adding highlighting for common swig
directives and user defined directives. For an alternative
syntax, see vimscript vim/vim#1247 (which I found after writing this).
closes: vim/vim#135622e31065a65
Co-authored-by: Julien Marrec <julien.marrec@gmail.com>
Co-authored-by: Matěj Cepl <mcepl@cepl.eu>
09d4133 changed blocknr_T from long to int64_t, so pe_bnum is now always 64-bit. This was an incompatible change in the swapfile format for 32-bit systems, but there have been no complaints in the past 9 years so just adjust the test.
Problem: Unused assignments when checking the value of 'listchars'.
Solution: Loop only once when just checking the value. Add a test to
check that this change doesn't cause double-free.
closes: vim/vim#1355900624a2fa0
Problem: File info disappears immediately when 'cmdheight' has just
decreased due to switching tabpage and 'shortmess' doesn't
contain 'o' or 'O'.
Solution: Make sure msg_row isn't smaller than cmdline_row.
fixes: vim/vim#13560closes: vim/vim#1356140ed6711bd
Problem: [security]: use-after-free in ex_substitute
Solution: always allocate memory
closes: vim/vim#13552
A recursive :substitute command could cause a heap-use-after free in Vim
(CVE-2023-48706).
The whole reproducible test is a bit tricky, I can only reproduce this
reliably when no previous substitution command has been used yet
(which is the reason, the test needs to run as first one in the
test_substitute.vim file) and as a combination of the `:~` command
together with a :s command that contains the special substitution atom `~\=`
which will make use of a sub-replace special atom and calls a vim script
function.
There was a comment in the existing :s code, that already makes the
`sub` variable allocate memory so that a recursive :s call won't be able
to cause any issues here, so this was known as a potential problem
already. But for the current test-case that one does not work, because
the substitution does not start with `\=` but with `~\=` (and since
there does not yet exist a previous substitution atom, Vim will simply
increment the `sub` pointer (which then was not allocated dynamically)
and later one happily use a sub-replace special expression (which could
then free the `sub` var).
The following commit fixes this, by making the sub var always using
allocated memory, which also means we need to free the pointer whenever
we leave the function. Since sub is now always an allocated variable,
we also do no longer need the sub_copy variable anymore, since this one
was used to indicated when sub pointed to allocated memory (and had
therefore to be freed on exit) and when not.
Github Security Advisory:
https://github.com/vim/vim/security/advisories/GHSA-c8qm-x72m-q53q26c11c5688
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: [security]: Use-after-free in win_close()
Solution: Check window is valid, before accessing it
If the current window structure is no longer valid (because a previous
autocommand has already freed this window), fail and return before
attempting to set win->w_closing variable.
Add a test to trigger ASAN in CI
25aabc2b8e
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: buffer-overflow in trunc_string()
Solution: Add NULL at end of buffer
Currently trunc_string() assumes that when the string is too long,
buf[e-1] will always be writeable. But that assumption may not always be
true. The condition currently looks like this
else if (e + 3 < buflen)
[...]
else
{
// can't fit in the "...", just truncate it
buf[e - 1] = NUL;
}
but this means, we may run into the last else clause with e still being
larger than buflen. So a buffer overflow occurs.
So instead of using `buf[e - 1]`, let's just always
truncate at `buf[buflen - 1]` which should always be writable.
3bd7fa12e1
vim-patch:9.0.2004: Missing test file
Problem: Missing test file
Solution: git-add the file to the repo
closes: vim/vim#13305d4afbdd071
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Trailing white space in tests
Solution: Delete it
This causes test_codestyle to fail, so we need to remove it again.
Hopefully that makes the CI green again.
Note: I will start using annotated tags from now on.
da200c2f78
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: tests running sh have problems
Solution: Check that dash is installed
closes: vim/vim#130401690ec64ff
Co-authored-by: Philip H <47042125+pheiduck@users.noreply.github.com>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-buffer-overflow in vim_regsub_both
Solution: Disallow exchanging windows when textlock is active
f6d28fe2c9
Cherry-pick test_crash.vim change from patch 9.0.1876.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: crash with bt_quickfix1_poc when cleaning up
and EXITFREE is defined
Solution: Test if buffer is valid in a window, else close
window directly, don't try to access buffer properties
While at it, increase the crash timeout slightly, so that CI has a
chance to finish processing the test_crash() test.
623ba31821
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-use-after-free in bt_normal()
Solution: check that buffer is still valid
6e60cf444a
Test change only.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap use after free in ins_compl_get_exp()
Solution: validate buffer before accessing it
ee9166eb3b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: heap-use-after-free in is_qf_win()
Solution: Check buffer is valid before accessing it
fc68299d43
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: test_crash1() fails on CI
Solution: don't run Screendump test, verify that it doesn't crash
by running it through a shell command line, testing
the exit value and concatenating success cmd using '&&'
db510ca805
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: FPE in adjust_plines_for_skipcol
Solution: don't divide by zero, return zero
Prevent a floating point exception when calculating w_skipcol (which can
happen with a small window when the number option is set and cpo+=n).
Add a test to verify
cb0b99f067
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in get_number
Solution: Return 0 when the count gets too large
[security]: overflow in get_number
When using the z= command, we may overflow the count with values larger
than MAX_INT. So verify that we do not overflow and in case when an
overflow is detected, simply return 0
73b2d3790c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in ex address parsing
Solution: Verify that lnum is positive, before substracting from
LONG_MAX
[security]: overflow in ex address parsing
When parsing relative ex addresses one may unintentionally cause an
overflow (because LONG_MAX - lnum will overflow for negative addresses).
So verify that lnum is actually positive before doing the overflow
check.
060623e4a3
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow in nv_z_get_count
Solution: break out, if count is too large
When getting the count for a normal z command, it may overflow for large
counts given. So verify, that we can safely store the result in a long.
58f9befca1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: overflow with count for :s command
Solution: Abort the :s command if the count is too large
If the count after the :s command is larger than what fits into a
(signed) long variable, abort with e_value_too_large.
Adds a test with INT_MAX as count and verify it correctly fails.
It seems the return value on Windows using mingw compiler wraps around,
so the initial test using :s/./b/9999999999999999999999999990 doesn't
fail there, since the count is wrapping around several times and finally
is no longer larger than 2147483647. So let's just use 2147483647 in the
test, which hopefully will always cause a failure
ac63787734
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Test for expanding "~" in substitute takes too long.
Solution: Disable the test for now.
916d6dd5b1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when expanding "~" in substitute causes very long text.
Solution: Limit the text length to MAXCOL.
ab9a2d884b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: wast filetype should be replaced by wat filetype
Solution: start using the official wat filetype name
runtime: rename `wast` filetype to `wat` (Wasm text format)
The problem is the name of the current filetype wast. When the plugin
was initially created, the file extension for Wasm text format was not
fixed and .wast was more popular.
However, recently .wat became the official file extension for
WebAssembly text (WAT) format and .wast is now a file extension for the
unofficial WAST format, which is a superset of .wat for the convenience
to describe the Wasm specification conformance tests.
https://webassembly.js.org/docs/contrib-wat-vs-wast.html
However for now, let's keep using the `wat` filetype even for the .wast
extension, so that we at least do not lose the filetype settings and
syntax highlighting. This can be adjusted later, if it turns out to have
a separate need for.
closes: vim/vim#13533bc8f79d36a
Co-authored-by: rhysd <lin90162@yahoo.co.jp>
Problem: Text properties test fails when 'encoding' is not utf-8.
Solution: Compare with original value of 'encoding'. (Christian Brabandt,
closesvim/vim#3986)
ed79d1e348
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Running tests may leave some files behind.
Solution: Delete the right files. Fix a few typos. (Dominique Pellé,
closesvim/vim#7436ac665c24c9
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot set a directory for a tab page.
Solution: Add the tab-local directory. (Yegappan Lakshmanan, closesvim/vim#4212)
00aa069db8
Session-related changes only.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim doesn't use the new ConPTY support in Windows 10.
Solution: Use ConPTY support, if available. (Nobuhiro Takasaki, closesvim/vim#3794)
aa5df7e312
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Terminal windows in a session are not properly restored.
Solution: Add "terminal" in 'sessionoptions'. When possible restore the
command running in a terminal.
4d8bac8bf5
Tests only. Nvim has no equivalent to "norestore" yet.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: matchparen highlight not cleared in completion mode
Solution: Clear matchparen highlighting in completion mode
Remove hard-coded hack in insexpand.c to clear the :3match before
displaying the completion menu.
Add a test for matchparen highlighting. While at it, move all test tests
related to the matchparen plugin into a separate test file.
closes: vim/vim#13493closes: vim/vim#135249588666360
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Tests are flaky because of using a common file name.
Solution: Rename files and directories to be more unique.
61abe7d8f8
Cherry-pick Test_custom_complete_autoload() from patch 8.2.4584.
Cherry-pick test_delete.vim & test_edit.vim changes from patch 9.0.0323.
Cherry-pick test_edit.vim changes from patch 8.2.3637.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Debugger test may fail when $CWD is very long.
Solution: Skip the test if the directory name is too long. (James McCoy,
closesvim/vim#10837)
db7a88db8b
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: Various things no6 properly tested.
Solution: Add various test cases. (Yegappan Lakshmanan, closesvim/vim#10259)
885de449c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash in debugger when a variable is not available in the current
block.
Solution: Check for a NULL name. (closesvim/vim#9926)
e406ff87c8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: expression breakpoint not checked in :def function.
Solution: Always compile a function for debugging if there is an expression
breakpoint. (closesvim/vim#8803)
26a4484da2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: crash when debugging a function with line continuation.
Solution: Check for a NULL pointer. (closesvim/vim#8521)
303215d60c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Temp files remain after running tests.
Solution: Delete the right files. (Dominique Pellé, closesvim/vim#8509)
6c72fd51a8
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Vim9: breakpoint on "for" does not work.
Solution: Use the right line number in ISN_DEBUG. (closesvim/vim#8486)
6fc0161682
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugging lambda does not work.
Solution: Use the compile type of the function when compiling a lambda.
(closesvim/vim#8412)
17d868b8b2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint at a comment line does not work.
Solution: Add the comment line number to the debug instruction.
(closesvim/vim#8429)
8cec9273d2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint in compiled function not always checked.
Solution: Check for breakpoint when calling compiled function from compiled
function.
2ac4b2536a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot set breakpoint in compiled function.
Solution: Check for breakpoint when calling a function.
4f8f54280f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugger shows too many lines.
Solution: Truncate at a comment, "enddef", etc. (closesvim/vim#8392)
59b50c3bee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim: when debugging only the first line of a command using line
continuation is displayed.
Solution: Find the next command and concatenate lines until that one.
(closesvim/vim#8392)
4cea536bdf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot get argument values during debugging.
Solution: Lookup names in the list of arguments. Put debug instruction
halfway for command.
6bc30b05e6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: when debugging cannot inspect local variables.
Solution: Make local variables available when debugging.
b69c6fb7b4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
runtime(termdebug): improve the breakpoint sign label (vim/vim#13525)
// related vim/vim#12589
// that should be the last chat (I) with Bram, r.i.p
2dd613f57b
Co-authored-by: Shane-XB-Qian <shane.qian@foxmail.com>
We already have an extensive suite of static analysis tools we use,
which causes a fair bit of redundancy as we get duplicate warnings. PVS
is also prone to give false warnings which creates a lot of work to
identify and disable.
Problem: CI: test_termdebug may still fail
Solution: use term_wait() to make it more robust
closes: vim/vim#13529fdbadea4b6
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
Problem: CI: test_termdebug fails
Solution: only test for a changed winlayout, if the window
width actually changed
Also, include an unrelated comment (which doesn't warrant its own patch
number)
305127f9f2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Terminal test for current directory not used on FreeBSD.
Solution: Make it work on FreeBSD. (Ozaki Kiichi, closesvim/vim#9516) Add
TermWait() inside Run_shell_in_terminal() as a generic solution.
ced2b38a56
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: still some issues with term_debug test
Solution: Use WaitForAssert()
closes: vim/vim#1293685c3a5bc26
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: No tests for the termdebug plugin
Solution: Add some simple tests for the termdebug plugin
closes: vim/vim#1292758f39d89a8
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: tests: failure in test_arabic
Solution: adjust the test for the changed arabic keymap
2a94e98792
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: complete_info() skips entries with 'noselect'
Solution: Check, if first entry is at original text state
Unfortunately, Commit daef8c74375141974d61b85199b383017644978c
introduced a regression, that when ':set completeopt+=noselect' is set
and no completion item has been selected yet, it did not fill the
complete_info['items'] list.
This happened, because the current match item did not have the
CP_ORIGINAL_TEXT flag set and then the cp->prev pointer did point to the
original flag item, which caused the following while loop to not being
run but being skipped instead.
So when the 'noselect' is set, only start with to the previous selection
item, if the initial completion item has the CP_ORIGINAL_TEXT flag set,
else use the 2nd previous item instead.
fixes: vim/vim#13451closes: vim/vim#1345257f9ce1a09
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: With 'smoothscroll' set, "w_skipcol" is not reset when unsetting 'wrap'.
Resulting in incorrect calculation of the cursor position.
Solution: Reset "w_skipcol" when unsetting 'wrap'.
fixes: vim/vim#12970closes: vim/vim#134391bf1bf569b
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: vim/vim#13367closes: vim/vim#133754bca4897a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: vim/vim#13402
related: vim/vim#12971closes: vim/vim#13408daef8c7437
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm9198c1f2b1
N/A patch:
vim-patch:9.0.2073: typo in quickfix.c comments
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: vim/vim#13419b731800522
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: pacman hooks are detected as conf filetype
Solution: make it consistent to pacman.conf and detect those
hooks as confini
Because confini has much better syntax highlighting than conf.
For reference, I identified pacman.conf and pacman hooks as dosini in
https://github.com/vim/vim/pull/6335, then
https://github.com/vim/vim/pull/10213 changed them to conf, then
https://github.com/vim/vim/pull/10518 changed pacman.conf to confini but
forgot to change hooks.
closes: vim/vim#133997d254dbc2d
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: *.{gn,gni} files are not recognized
Solution: Detect some as gn filetype (without adding an extra filetype)
Those come from: https://gn.googlesource.com/gn/closes: vim/vim#1340584394f2be4
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: vim/vim#13396a36acb7ac4
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: vim/vim#1338047416d1a74
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: vim/vim#13389a8c664a042
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: vim/vim#13376closes: vim/vim#13377c59c1e0d88
The change in check_due_timer() is N/A as Nvim calls timer callbacks on
the main loop.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: vim/vim#13371a0e1f06f04
Problem: Wrong color for half of wide character next to pum scrollbar.
Solution: Redraw the screen cell with the right color. (closesvim/vim#9874)
35d8c2010e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: completion shows current word after completion restart
Solution: remove the word being completed after completion restart
The word being completed is shown in a completion list after completion
restart, because it isn't removed from the current buffer before
searching for matches.
Also adjust `Test_complete_add_onechar` to match the new behavior.
closes: vim/vim#133492e3cd52fa0
Co-authored-by: nwounkn <nwounkn@gmail.com>
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: no filetype detection for Debian sources
Solution: Add new deb822sources filetype
closes: vim/vim#13320bd734c3bea
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: vim/vim#12230closes: vim/vim#1297169fb5afb3b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: vim/vim#13228closes: vim/vim#13243dd75fcfbdf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: INI files not detected
Solution: detect uppercase .INI as dosini files
It previo~1 only worked for lower-case .ini files, but upperc~1 .INI is
also somewhat common on account of DOS' old 8.3 upperc~2 only filena~1.
closes: vim/vim#133164a82bdfaa8
Co-authored-by: Martin Tournoij <martin@arp242.net>
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: test: undofile left behind
Solution: cleanup undofile
fix: tmp file not deleted when running make test_undo
Temporary file `.Xtestfile.txt.un~` was left running `make test_undo`
and vim was configured with:
```
./configure --with-features=normal --enable-gui=no --enable-terminal
```
closes: vim/vim#13304b07b9dc4da
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
Problem: Scrolling non-current window using mouse is inconsistent
depending on 'scrollbind'/'scrolloff' and different from GUI
vertical scrollbar when 'cursorbind' is set.
Solution: Don't move cursor in non-current windows for 'cursorbind' if
cursor in the current window didn't move.
closes: vim/vim#13219closes: vim/vim#132108e5f26ec6a
Problem: Cannot scroll up in diff mode with many filler lines and zero
'scrolloff'.
Solution: Invalidate w_cline_row before calling comp_botline().
closes: vim/vim#132560583491277
Problem: Clean up cmdline option completion code
Solution: Fix various minor problems
- Fix manual array size calculations to just use `ARRAY_LENGTH()`.
- Fix unintentional typo in comments due to copy-paste error.
- Fix assert_equal() usages to pass the expected value to first
parameter instead of 2nd one to avoid confusion.
- Fix signed vs unsigned warnings
- Correct misplaced comments about set_op_T and set_prefix_T
and fix a typo in another comment
closes: vim/vim#13249closes: vim/vim#132376d11347260
N/A patch:
vim-patch:9.0.1976: style: space before tab in optionstr.c
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: win32: missing '**' expansion test (after v9.0.1947)
Solution: Add test for MS-Windows
win32: Add "**" test
Vim supports "**" on MS-Windows. However, it is not tested by
`Test_glob_extended_bash`.
Unlike Unix, it doesn't use 'shell' and doesn't support {,} expansion.
So, I added as a separate test.
related: vim/vim#13205closes: vim/vim#132504a1ad55564
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: cmdline completion should consider key option
Solution: Disable cmdline completion for key option, slightly
refactor how P_NO_CMD_EXPAND is handled
Harden crypto 'key' option: turn off cmdline completion, disable set-=
"set-=" can be used maliciously with a crypto key, as it allows an
attacker (who either has access to the computer or a plugin author) to
guess a substring by observing the modified state. Simply turn off
set+=/-=/^= for this option as there is no good reason for them to be
used.
Update docs to make that clear as well.
Also, don't allow cmdline completion for 'key' as it just shows *****
which is not useful and confusing to the user what it means (if the user
accidentally hits enter they will have replaced their key with "*****"
instead).
Move logic to better location, don't use above 32-bit for flags
Move P_NO_CMD_EXPAND to use the unused 0x20 instead of going above
32-bits, as currently the flags parameter is only 32-bits on some
systems. Left a comment to warn that future additions will need to
change how the flags work either by making it 64-bit or split into two
member vars.
Also, move the logic for detecting P_NO_CMD_EXPAND earlier so it's not
up to each handler to decide, and you won't see the temporary "..." that
Vim shows while waiting for completion handler to complete.
closes: vim/vim#132246ee7b521fa
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Cmdline completion for 'listchars' fields doesn't include
"multispace" and "leadmultispace" (after 9.0.1958).
Solution: Include "multispace" and "leadmultispace" in lcstab.
closes: vim/vim#132251f025b01e2
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: vim/vim#13182900894b09a
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Configure script may not detect xattr correctly
Solution: include sys/xattr instead of attr/xattr,
make Test_write_with_xattr_support() test
xattr feature correctly
This also applies to the Smack security feature, so change the include
and configure script for it as well.
closes: vim/vim#132296de4e58cf2
Problem: No support for writing extended attributes
Solution: Add extended attribute support for linux
It's been a long standing issue, that if you write a file with extended
attributes and backupcopy is set to no, the file will loose the extended
attributes.
So this patch adds support for retrieving the extended attributes and
copying it to the new file. It currently only works on linux, mainly
because I don't know the different APIs for other systems (BSD, MacOSX and
Solaris). On linux, this should be supported since Kernel 2.4 or
something, so this should be pretty safe to use now.
Enable the extended attribute support with normal builds.
I also added it explicitly to the :version output as well as make it
able to check using `:echo has("xattr")`, to have users easily check
that this is available.
In contrast to the similar support for SELINUX and SMACK support (which
also internally uses extended attributes), I have made this a FEAT_XATTR
define, instead of the similar HAVE_XATTR.
Add a test and change CI to include relevant packages so that CI can
test that extended attributes are correctly written.
closes: vim/vim#306closes: vim/vim#13203e085dfda5d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Custom cmdline completion skips original cmdline when pressing
Ctrl-P at first match if completion function invokes glob().
Solution: Move orig_save into struct expand_T.
closes: vim/vim#1321628a23602e8
Problem: Vim9: error codes spread out
Solution: group them together and reserve 100
more for future use
Reserve 100 error codes for future enhancements to the Vim9 class
support
closes: vim/vim#13207413f83990f
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Bash Expansion test fails on Windows/MacOS
Solution: Disable Test_glob_extended_bash for now
This test doesn't work on Windows even if bash can be executed, since
the globstar functionality has only been enabled in Unix builds of Vim
(Commit 9eb1ce531527a7177d16373b0f8689bbcd3d5f73, patch 9.0.1946).
closes: vim/vim#1320503ca4002c1
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: filename expansion using ** in bash may fail
Solution: Try to enable the globstar setting
Starting with bash 4.0 it supports extended globbing using the globstar
shell option. This makes matching recursively below a certain directory
using the ** pattern work as expected nowadays. However, we need to
explicitly enable this using the 'shopt -s globstar' bash command.
So let's check the bash environment variable $BASH_VERSINFO (which is
supported since bash 3.0 and conditionally enable the globstar option,
if the major version is at least 4. For older bashs, this at least
shouldn't cause errors (unless one is using really ancient bash 2.X or
something).
closes: vim/vim#13002closes: vim/vim#131449eb1ce5315
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: CursorHoldI event interferes with "CTRL-G U". (Naohiro Ono)
Solution: Restore the flag for "CTRL-G U" after triggering CursorHoldI.
(closesvim/vim#8937)
5a9357d0bf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: TextChanged does not trigger after TextChangedI.
Solution: Store the tick separately for TextChangedI. (Christian Brabandt,
closesvim/vim#8968, closesvim/vim#8932)
db3b44640d
Co-authored-by: Christian Brabandt <cb@256bit.org>
This was only used to avoid the effect of SHM_OVERALL. This can easily
be handled in isolation, instead of clearing out all of 'shortmess' which
has unwanted side effects and mystifies what really is going on.
Problem: multispace wrong when scrolling horizontally
Solution: Update position in "multispace" or "leadmultispace" also in
skipped chars. Reorder conditions to be more consistent.
closes: vim/vim#13145closes: vim/vim#13147abc808112e
Problem: missing test for mouse click + 'virtedit'
Solution: Add test for clicking after eol with 'virtualedit' and wrapped
line
closes: vim/vim#1315746a0582ffa
Problem: :bwipe fails after switching window from aucmd_win.
Solution: Decrement b_nwindows after switching back to aucmd_win.
closes: vim/vim#1316046bdae036a
Problem: make test_compilers fails on ubuntu
Solution: set LC_ALL=C
fix: make test_compiler failed on xubuntu 22.04.3
Problem: 'make test_compiler' failed on Linux xubuntu 22.04.3 but
succeeded on e.g. macOS. To reproduce:
```
$ ./configure --with-features=huge --enable-gui=no --enable-perlinterp=yes
$ make -j12
$ cd vim/src/testdir
$ make test_compiler
...snip...
Found errors in Test_compiler():
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 24: command did not fail: clist
command line..script /home/dope/sb/vim/src/testdir/runtest.vim[601]..function RunTheTest[54]..Test_compiler line 30: Pattern '\\n \\d\\+ Xfoo.pl:3: Global symbol "$foo" requires explicit package name' does not match '\n19 Xfoo.pl:3: Global symbol "$foo" requires explicit package name (did you forget to declare "my $foo"?)'
make: *** [Makefile:70: test_compiler] Error 1
```
Solution: set `LC_ALL` to "C" in `Test_compiler()`
closes: vim/vim#13173ca0ffc0d63
Co-authored-by: Dominique Pellé <dominique.pelle@tomtom.com>
Oldtests clean up after themselves, and the options that need operators
to align with Vim all deny duplicates, so there is no need to set them
to default.
Also make the variable name that test_listchars.vim uses to align with
Vim more obvious.
Problem: :unhide does not check for failing to close a window.
Solution: When closing a window fails continue with the next one. Do not
try closing the autocmd window. (closesvim/vim#9984)
6f2465d336
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Wrong curswant when clicking on empty line or with vsplits.
Solution: Don't check for ScreenCols[] before the start of the window
and handle empty line properly.
closes: vim/vim#1313203cd697d63
patch 9.0.1918: No filetype detection for Authzed filetypes
Problem: No filetype detection for Authzed filetypes
Solution: Detect the *.zed file extension as authzed filetype
closes: vim/vim#131295790a54166
Co-authored-by: Matt Polzin <mpolzin@workwithopal.com>
Problem: r_CTRL-C works differently in visual mode
Solution: Make r_CTRL-C behave consistent in visual mode
in terminal and Windows GUI
in visual mode, r CTRL-C behaves strange in Unix like environments. It
seems to end visual mode, but still is waiting for few more chars,
however it never seems to replace it by any characters and eventually
just returns back into normal mode.
In contrast in Windows GUI mode, r_CTRL-C replaces in the selected area
all characters by a literal CTRL-C.
Not sure why it behaves like this. It seems in the Windows GUI, got_int
is not set and therefore behaves as if any other normal character has
been pressed.
So remove the special casing of what happens when got_int is set and
make it always behave like in Windows GUI mode. Add a test to verify it
always behaves like replacing in the selected area each selected
character by a literal CTRL-C.
closes: vim/vim#13091closes: vim/vim#13112476733f3d0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No runtime support for Mojo
Solution: Add basic filetype and syntax plugins
closes: vim/vim#13062closes: vim/vim#130630ce2c594d0
Co-authored-by: Mahmoud Abduljawad <mahmoud@masaar.com>
Problem: Various Typos
Solution: Fix Typos
This is a collection of typo related commits.
closes: vim/vim#12753closes: vim/vim#13016ee17b6f70d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Co-authored-by: nuid64 <lvkuzvesov@proton.me>
Co-authored-by: Meng Xiangzhuo <aumo@foxmail.com>
Co-authored-by: Dominique Pellé <dominique.pelle@gmail.com>
Problem: missing test for patch 9.0.1873
Solution: add a test trying to exchange windows
Add a test, making sure that switching windows is not allowed when
textlock is active, e.g. when running `:s/<pat>/\=func()/`
18d2709aa1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: CI may fail in test_recover_empty_swap
Solution: Set directory option
Fix failing Test_recover_empty_swap test
:recover by default not only looks in the current directory, but also in
~/tmp for files to recover. If it finds some files to recover, it will
interactively prompt for a file to recover. However, prompting doesn't
work when running the test suite (and even if it would, there is no one
that can answer the prompt).
So it doesn't really make sense during testing, to inspect different
directories for swap files and prompt and wait (which will lead to a
timeout and therefore a failing test).
So set the 'directory' option temporarily to the current directory only
and reset it back once the test finishes.
closes: vim/vim#130381c7397f3f1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Too many delete() calls in tests.
Solution: Use deferred delete where possible.
db77cb3c08
Include test_recover.vim changes only.
Cherry-pick test_recover.vim change from patch 8.2.3637.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
vim-patch:9.0.1866: undo is synced after character find
Problem: Undo is synced after character find.
Solution: Set no_u_sync when calling gotchars_nop().
closes: vim/vim#13022closes: vim/vim#13024dccc29c228
Problem: buffer-overflow in vim_regsub_both()
Solution: Check remaining space
ced2c7394a
The change to do_sub() looks confusing. Maybe it's an overflow check?
Then the crash may not be applicable to Nvim because of different casts.
The test also looks confusing. It seems to source itself recursively.
Also don't call strlen() twice on evaluation result.
N/A patches for version.c:
vim-patch:9.0.1849: CI error on different signedness in ex_cmds.c
vim-patch:9.0.1853: CI error on different signedness in regexp.c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: use-after-free in do_ecmd
Solution: Verify oldwin pointer after reset_VIsual()
e1dc9a6275
N/A patches for version.c:
vim-patch:9.0.1841: style: trailing whitespace in ex_cmds.c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Rexx files may not be recognised
Solution: Add shebang detection and improve disambiguation of *.cls
files
closes: vim/vim#12951e06afb7860
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: 'linebreak' is incorrectly drawn after 'breakindent'.
Solution: Don't include 'breakindent' size when already after it.
closes: vim/vim#12937closes: vim/vim#129401d3e0e8f31
Problem: camel-case spelling has issues with digits
Solution: Improve the camCase spell checking by taking digits
and caps into account
Rewrite the conditions to check for word boundaries by taking into
account the presence of digits and all-caps sequences such as acronyms.
closes: vim/vim#12644closes: vim/vim#12933d08745040b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Cursor position still wrong with 'showbreak' and virtual text
after last character or 'listchars' "eol".
Solution: Remove unnecessary w_wcol adjustment in curs_columns(). Also
fix first char of virtual text not shown at the start of a screen
line.
closes: vim/vim#12478closes: vim/vim#12532closes: vim/vim#129046a3897232a
Problem: wrong cursor position with 'showbreak' and lcs-eol
Solution: Add size of 'showbreak' before when 'listchars' "eol" is used.
Also fix wrong cursor position with wrapping virtual text on
empty line and 'showbreak'.
closes: vim/vim#128911193951beb
Problem: cannot distinguish Forth and Fortran *.f files
Solution: Add Filetype detection Code
Also add *.4th as a Forth filetype
closes: vim/vim#1225119a3bc3add
Don't remove filetype files from Vim patches:
- filetype.vim, script.vim, ft.vim usually contain useful changes
- script.vim and ft.vim don't even have their paths spelled correctly
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: Problems when setting bin/paste option
Solution: When setting binary/paste, remember that this also affects
depending options, so that :verbose set returns the right
location.
Mention if depending options for 'binary' or 'paste' have been reset
indirectly. Add a test to verify it works.
Also noticed as small bug, that the global option value for expandtab
was not reset when paste option is set, so fix that while at it.
closes: vim/vim#12837closes: vim/vim#12879757593c07a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: sidescrolloff and scrolloff options work slightly
different than other global-local options
Solution: Make it behave consistent for all global-local options
It was noticed, that sidescrolloff and scrolloff options behave
differently in comparison to other global-local window options like
'listchars'
So make those two behave like other global-local options. Also add some
extra documentation for a few special local-window options.
Add a few tests to make sure all global-local window options behave
similar
closes: vim/vim#12956closes: vim/vim#126434a8eb6e7a9
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong display with wrapping virtual text or unprintable chars,
'showbreak' and 'smoothscroll'.
Solution: Don't skip cells taken by 'showbreak' in screen lines before
"w_skipcol". Combined "n_skip" and "skip_cells".
closes: vim/vim#12597b557f48982
Problem: Using freed memory when 'tagfunc' wipes out buffer that holds
'complete'.
Solution: Make a copy of the option. Make sure cursor position is valid.
0ff01835a4
Cherry-pick a cmdwin change from patch 9.0.0500.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The cursor line number becomes negative when using :z^ in an empty
buffer. (neovim vim/vim#6557)
Solution: Correct the line number. Also reset the column.
a364cdb648
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Typos in tests; one lua line not covered by test.
Solution: Fix typos. Add test case. (Dominique Pellé, closesvim/vim#9994)
81b573d7e5
Cherry-pick test_menu.vim change from patch 9.0.1453.
N/A patch:
vim-patch:8.2.3045: minor typos
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Autocmd test is a bit flaky on MS-Windows.
Solution: Add a bit more sleeping. (Ken Takata, closesvim/vim#11095)
ae04a6049b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: On MS-Windows some tests are flaky.
Solution: Add sleeps, disable swapfile, mark test as flaky. (Ken Takata,
closesvim/vim#11082)
0500e87eba
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: Using separate delete() call instead of writefile() 'D' flag.
Solution: Use the writefile 'D' flag.
3411265a36
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Deleting files in tests is a hassle.
Solution: Use the new 'D' flag of writefile().
e1f3ab73bc
vim-patch:e1f3ab73bc7c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: "for" and "while" not recognized after :vim9cmd and :legacy.
(Emanuele Torre)
Solution: Recognize all the command modifiers. (closesvim/vim#11087)
Add a test to check the list of modifiers.
9132426334
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
e7cda97b6b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: When switching window in autocmd the restored cursor position may
be wrong.
Solution: Do not restore the cursor if it was not set. (closesvim/vim#10775)
b03950fafa
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Window title test still fails in some configurations.
Solution: Explicitly set the 'title' option.
1450112eef
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Window title test fails in some configurations.
Solution: Only run the test if the title can be obtained.
a6c09a7c20
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Using setbufvar() may change the window title.
Solution: Do not redraw when creating the autocommand window. (closesvim/vim#9613)
dff97e65eb
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: CTRL-A does not work properly with the cmdline popup menu.
Solution: Fix issues with CTRL-A. Add more tests for the cmdline popup
menu. Remove TermWait() before VeriryScreenDump(). Refactor the
cmdline popup code. (Yegappan Lakshmanan, closesvim/vim#9735)
560dff49c0
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Test_xrestore sometimes fails.
Solution: Mark the test as flayky. Move marking test as flaky to the test
instead of listing them in runtest.
f08b0eb869
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for cmdline window and terminal fails on MS-Windows.
Solution: Skip the test on MS-Windows.
0b49648486
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Crash when using a terminal popup window from the cmdline window.
Solution: Instead of checking cmdwin_type call cmdwin_is_active().
(closesvim/vim#8286)
e5b4486c42
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Tests using term_wait() can still be flaky.
Solution: Increase the wait time when rerunning a test. (James McCoy,
closesvim/vim#5899) Halve the initial times to make tests run faster
when there is no rerun.
6a2c5a7dd5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Some tests fail when the system is slow.
Solution: Make the run number global, use in the test to increase the
waiting time. (closesvim/vim#5841)
3ed9efc2b1
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Autocmd test fails on a slow system.
Solution: Adjust the expectations. (James McCoy, closesvim/vim#5685)
8fb1b47a5e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Some tests fail when run in the GUI.
Solution: Make sure the window width is enough. In the GUI run terminal Vim
in the terminal, if possible.
3180fe6c6d
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: A couple of tests may fail when features are missing.
Solution: Check for features. (Dominique Pelle, closesvim/vim#5561)
705724e430
Just copy the two 'wincolor' test functions from Vim.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: state() test fails on some Mac systems.
Solution: Increase the wait time. (closesvim/vim#4983)
b7a97ef340
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for SafeStateAgain may still fail.
Solution: Send another message to trigger SafeStateAgain.
0f6629a08a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Test for SafeState and SafeStateAgain may fail.
Solution: Accept more possible responses
513537bfff
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for SafeState and SafeStateAgain.
Solution: Add tests.
cadbe1b1fb
This test is quite useless. Don't port to Lua.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: No tests for state().
Solution: Add tests. Clean up some feature checks. Make "a" flag work.
c258549032
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Runtime: no support for bicep files
Solution: Add filetype support for bicepparam
closes: vim/vim#127842d0988ef93
Co-authored-by: Scott McKendry <scott.c.mckendry@gmail.com>
Problem: Runtime: Missing QML support
Solution: Add QML support to Vim
closes: vim/vim#12810bedc69f9d6
Co-authored-by: ChaseKnowlden <haroldknowlden@gmail.com>
Problem: Cursor is adjusted in window that did not change in size by
'splitkeep'.
Solution: Only check that cursor position is valid in a window that
has changed in size.
closes: vim/vim#1250916af913eee
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Problem: no support for custom cmdline completion
Solution: Add new vimscript functions
Add the following two functions:
- getcmdcompltype() returns custom and customlist functions
- getcompletion() supports both custom and customlist
closes: vim/vim#1222892997dda78
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: crash when passing invalid buffer to undotree()
Solution: Use get_buf_arg() instead of tv_get_buf_from_arg().
closes: vim/vim#12862closes: vim/vim#12830ab9f2ecfd4
Problem: Visual highlight not working with cursor at end of screen line
and 'showbreak'.
Solution: Only update "vcol_prev" when drawing buffer text.
closes: vim/vim#128658fc6a1dae0
Problem: can't move to last non-blank char
Solution: Make g<end> behave like that
Make it possible to move to last non-blank char on a line
We can distinguish between g0 and g^ to move to the very first character
and the first non-blank char.
And while we can move to the last screen char, we cannot go to the last
non-blank screen char.
Since I think g$ is the more widely used and known movement command (and
g<end> is synonymous to it) change the behaviour of g<end> to move to
last non-screen char instead and don't have this be the same command as
the g$ command anymore.
If you want to keep the old behaviour, you can use:
```
nnoremap g<end> g$
```
Add a test to verify the behaviour.
closes: vim/vim#12593b5f6fe9ca2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Missing test coverage for blockwise Visual highlight with
virtual that starts with a double-width char.
Solution: Add a new virtual text to the test. Some other small fixes.
closes: vim/vim#12835fc3058495d
Problem: Wrong curswant when clicking and the second cell of a
double-width char.
Solution: Don't copy virtcol of the first char to the second one.
closes: vim/vim#128429994160bfe
Problem: reverse() on string doesn't work in compiled function.
Solution: Accept string in argument type check. (Yegappan Lakshmanan,
closesvim/vim#12377)
f9dc278946
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: reverse() does not work for a String.
Solution: Implement reverse() for a String. (Yegappan Lakshmanan,
closesvim/vim#12179)
03ff1c2dde
vim-patch:9.0.1738: Duplicate code to reverse a string
Problem: Duplicate code to reverse a string
Solution: Move reverse_text() to strings.c and remove string_reverse().
closes: vim/vim#128474dd266cb66
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Wrong cursor position when clicking after concealed text
with 'virtualedit'.
Solution: Store virtual columns in ScreenCols[] instead of text
columns, and always use coladvance() when clicking.
This also fixes incorrect curswant when clicking on a TAB, so now
Test_normal_click_on_ctrl_char() asserts the same results as the ones
before patch 9.0.0048.
closes: vim/vim#12808e500ae8e29
Remove the mouse_adjust_click() function.
There is a difference in behavior with the old mouse_adjust_click()
approach: when clicking on the character immediately after concealed
text that is completely hidden, cursor is put on the clicked character
rather than at the start of the concealed text. The new behavior is
better, but it causes unnecessary scrolling in a functional test (which
is an existing issue unrelated to these patches), so adjust the test.
Now fully merged:
vim-patch:9.0.0177: cursor position wrong with 'virtualedit' and mouse click
Problem: cursor position wrong when clicking on an unprintable char
Solution: Don't update prev_ptr when wlv.n_extra is not zero.
closes: vim/vim#12664b25dbb3f9b
Tests only. Code superseded by patch 9.0.1725.
Problem: Cursor in wrong column with mouse click after concealed text.
Solution: Store the text column when drawing text.
b90818867c
Tests only. Code changes moved to the port of patch 9.0.1725.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: screenpos() wrong result with w_skipcol and cpoptions+=n
Solution: Use adjust_plines_for_skipcol() instead of subtracting
w_skipcol.
closes: vim/vim#12625bfe377b8f2
Problem: missing winid argument for virtcol()
Solution: Add a {winid} argument to virtcol()
Other functions col(), charcol() and virtcol2col() support a {winid}
argument, so it makes sense for virtcol() to also support than.
Also add test for virtcol2col() with 'showbreak' and {winid}.
closes: vim/vim#12633825cf813fa
