Problem: Cursor is moved to bottom of window trying to pagescroll when
already at the start of the buffer (Asheq Imran, after v9.1.0357)
Solution: Don't move cursor when buffer content did not move.
(Luuk van Baal)
8ccb89016e
(cherry picked from commit 3e6cec0bef)
Problem: smoothscroll may cause infinite loop, with
very narrow windows
(Jaehwang Jung, after v9.1.0280)
Solution: Check for width1 being negative, verify
that win_linetabsize does not overflow
fixes: vim/vim#14750closes: vim/vim#14772eff20eb35d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No scrolling happens with half-page scrolling with line
filling entire window when 'smoothscroll' is disabled.
(Mathias Rav, after v9.1.0285)
Solution: Adjust amount to move cursor by so that it is moved the same
number of lines as was scrolled, even when scrolling different
number of lines than requested with 'nosmoothscroll'.
58448e09be
Problem: Page scrolling does not always place the cursor at the top or
bottom of the window (Mathias Rav)
Solution: Place the cursor at the top or bottom of the window.
(Luuk van Baal)
4b6b0c4024
Problem: Missing test for what patch v9.1.0285 fixes
Solution: Add a test for cursor movement at buffer boundaries.
(Luuk van Baal)
aa8e22b035
vim-patch:9.1.0225: test_matchparen not run in CI
Problem: test_matchparen not run in CI
Solution: add test_matchparen.res to NEW_TESTS_RES in Makefile,
update changed highlighting dump from v9.1.61
059aeac2be
Changes N/A and test result was restored in patch 9.1.0258 (included in #28160).
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
bd28cae1f1
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
Problem: Two unrelated things are tested by a single test.
Solution: Split it into two, restoring the old Test_brace_single_line().
Add missing cleanup to some tests.
(zeertzjq)
closes: vim/vim#14323ad493ef3ea
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
b9f5b95b7b
Problem: Coverity reports dead code.
Solution: Remove the dead code. Also fix a mistake in ml_get_pos_len()
and update some comments (zeertzjq).
closes: vim/vim#141898c55d60658
Problem: upper-case of ß should be U+1E9E (CAPITAL LETTER SHARP S)
(fenuks)
Solution: Make gU, ~ and g~ convert the U+00DF LATIN SMALL LETTER SHARP S (ß)
to U+1E9E LATIN CAPITAL LETTER SHARP S (ẞ), update tests
(glepnir)
This is part of Unicode 5.1.0 from April 2008, so should be fairly safe
to use now and since 2017 is part of the German standard orthography,
according to Wikipedia:
https://en.wikipedia.org/wiki/Capital_%E1%BA%9E#cite_note-auto-12
There is however one exception: UnicodeData.txt for U+00DF
LATIN SMALL LETTER SHARP S does NOT define U+1E9E LATIN CAPITAL LETTER
SHARP S as its upper case version. Therefore, toupper() won't be able
to convert from lower sharp s to upper case sharp s (the other way
around however works, since U+00DF is considered the lower case
character of U+1E9E and therefore tolower() works correctly for the
upper case version).
fixes: vim/vim#5573closes: vim/vim#14018bd1232a1fa
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: E95 is possible if a buffer called "[Command Line]" already
exists when opening the cmdwin. This can also happen if the
cmdwin's buffer could not be deleted when closing.
Solution: Un-name the cmdwin buffer, and give it a special name instead,
similar to what's done for quickfix buffers and for unnamed
prompt and scratch buffers. As a result, BufFilePre/Post are
no longer fired when opening the cmdwin. Add a "command" key
to the dictionary returned by getbufinfo() to differentiate
the cmdwin buffer instead. (Sean Dewar)
Cherry-pick test_normal changes from v9.0.0954.
1fb4103206
Problem: i_CTRL-R- no longer works in replace mode
Solution: delete characters in replace mode before putting, add a test,
add a bit warning into the documentation, that i_CTRL-R-P/O
is not supported in Replace mode for now
fixes: vim/vim#13792closes: vim/vim#138165d5cbb2b9a
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: cursor wrong after { in single line buffer
(Edwin Chan)
Solution: do not place the cursor at the end for a single
line buffer when moving backwards
(Gary Johnson)
closes: vim/vim#13780closes: vim/vim#137839e6549d2fb
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: [security]: overflow in nv_z_get_count
Solution: break out, if count is too large
When getting the count for a normal z command, it may overflow for large
counts given. So verify, that we can safely store the result in a long.
58f9befca1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong curswant when clicking on empty line or with vsplits.
Solution: Don't check for ScreenCols[] before the start of the window
and handle empty line properly.
closes: vim/vim#1313203cd697d63
Problem: Various Typos
Solution: Fix Typos
This is a collection of typo related commits.
closes: vim/vim#12753closes: vim/vim#13016ee17b6f70d
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Adri Verhoef <a3@a3.xs4all.nl>
Co-authored-by: Viktor Szépe <viktor@szepe.net>
Co-authored-by: nuid64 <lvkuzvesov@proton.me>
Co-authored-by: Meng Xiangzhuo <aumo@foxmail.com>
Co-authored-by: Dominique Pellé <dominique.pelle@gmail.com>
Problem: can't move to last non-blank char
Solution: Make g<end> behave like that
Make it possible to move to last non-blank char on a line
We can distinguish between g0 and g^ to move to the very first character
and the first non-blank char.
And while we can move to the last screen char, we cannot go to the last
non-blank screen char.
Since I think g$ is the more widely used and known movement command (and
g<end> is synonymous to it) change the behaviour of g<end> to move to
last non-screen char instead and don't have this be the same command as
the g$ command anymore.
If you want to keep the old behaviour, you can use:
```
nnoremap g<end> g$
```
Add a test to verify the behaviour.
closes: vim/vim#12593b5f6fe9ca2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Wrong curswant when clicking and the second cell of a
double-width char.
Solution: Don't copy virtcol of the first char to the second one.
closes: vim/vim#128429994160bfe
Problem: Wrong cursor position when clicking after concealed text
with 'virtualedit'.
Solution: Store virtual columns in ScreenCols[] instead of text
columns, and always use coladvance() when clicking.
This also fixes incorrect curswant when clicking on a TAB, so now
Test_normal_click_on_ctrl_char() asserts the same results as the ones
before patch 9.0.0048.
closes: vim/vim#12808e500ae8e29
Remove the mouse_adjust_click() function.
There is a difference in behavior with the old mouse_adjust_click()
approach: when clicking on the character immediately after concealed
text that is completely hidden, cursor is put on the clicked character
rather than at the start of the concealed text. The new behavior is
better, but it causes unnecessary scrolling in a functional test (which
is an existing issue unrelated to these patches), so adjust the test.
Now fully merged:
vim-patch:9.0.0177: cursor position wrong with 'virtualedit' and mouse click
Problem: cursor position wrong when clicking on an unprintable char
Solution: Don't update prev_ptr when wlv.n_extra is not zero.
closes: vim/vim#12664b25dbb3f9b
Tests only. Code superseded by patch 9.0.1725.
Problem: Ctrl-Q not handled like Ctrl-V in replace mode
Solution: Handle Ctrl-Q like Ctrl-V
closes: vim/vim#12686closes: vim/vim#126842d63e4b3cc
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Cursor moves to wrong line when 'foldmethod' is "diff". (Rick
Howe)
Solution: Adjust logic for scrolling. (Luuk van Baal, closesvim/vim#12364,
closesvim/vim#12218)
aa6ba308a1
Problem: Mouse shape test is flaky, especially on Mac OS.
Solution: Instead of starting all timers at the same time, start the next
one in the callback of the previous one. (Yee Cheng Chin,
closesvim/vim#11673) Also use "bwipe!" instead of "close!" to avoid
swap files remaining.
1881abfc34
Cherry-pick test_normal.vim changes from patch 8.2.3795.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Wrong cursor position when using "gj" and "gk" in a long line.
Solution: Adjust computations for the cursor position and skipcol. Re-enable
tests that pass now, disable failing breakindent test.
4b6172e108
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Value of MAXCOL not available in Vim script.
Solution: Add v:maxcol. (Naohiro Ono, closesvim/vim#9451)
56200eed62
The variable is always 2147483647, but introducing it makes functions
easier to document.
Co-authored-by: naohiro ono <obcat@icloud.com>
