Merge pull request #18738 from zeertzjq/vim-8.2.5010

vim-patch:8.2.5010: the terminal debugger uses various global variables

runtime/doc/nvim_terminal_emulator.txt

@@ -304,7 +304,7 @@ breakpoint, or use the "Clear breakpoint" right-click menu entry.
 Inspecting variables ~
 					*termdebug-variables* *:Evaluate*
  `:Evaluate`	    evaluate the expression under the cursor
- `K`		    same
+ `K`		    same (see |termdebug_map_K| to disable)
  `:Evaluate` {expr}   evaluate {expr}
  `:'<,'>Evaluate`     evaluate the Visually selected text
 
@@ -333,7 +333,7 @@ Four autocommands can be used: >
 						*TermdebugStartPre*
 TermdebugStartPre		Before starting debugging.
 				Not triggered if the debugger is already
-				running or |g:termdebugger| cannot be
+				running or the debugger command cannot be
 				executed.
 						*TermdebugStartPost*
 TermdebugStartPost		After debugging has initialized.
@@ -362,14 +362,24 @@ This works slightly differently:
 
 						*termdebug_use_prompt*
 Prompt mode can be used with: >
+	let g:termdebug_config['use_prompt'] = 1
+Or if there is no g:termdebug_config: >
 	let g:termdebug_use_prompt = 1
-
+<
+						*termdebug_map_K*
+The K key is normally mapped to :Evaluate. If you do not want this use: >
+	let g:termdebug_config['map_K'] = 0
+Or if there is no g:termdebug_config: >
+	let g:termdebug_map_K = 0
 <
 						*termdebug_disasm_window*
-If you want the Asm window shown by default, set this to 1. Setting to
-any value greater than 1 will set the Asm window height to that value: >
+If you want the Asm window shown by default, set the flag to 1.
+the "disasm_window_height" entry can be used to set the window height: >
+	let g:termdebug_config['disasm_window'] = 1
+	let g:termdebug_config['disasm_window_height'] = 15
+or, if there is no g:termdebug_config: >
 	let g:termdebug_disasm_window = 15
-<
+Any value greater than 1 will set the Asm window height to that value: >
 
 Communication ~
 						*termdebug-communication*
@@ -386,13 +396,24 @@ communication channel.
 
 
 Customizing ~
+				*termdebug-customizing* *g:termdebug_config*
+In the past several global variables were used for configuration.  These are
+deprecated, using the g:termdebug_config dictionary is preferred.  When
+g:termdebug_config exists the other global variables will not be used.
 
-GDB command						 *termdebug-customizing*
 
-To change the name of the gdb command, set the "termdebugger" variable before
-invoking `:Termdebug`: >
-	let termdebugger = "mygdb"
+GDB command ~
+							*g:termdebugger*
+To change the name of the gdb command, set "debugger" entry in
+g:termdebug_config or the "g:termdebugger" variable before invoking
+`:Termdebug`: >
+	let g:termdebug_config['command'] = "mygdb"
+Or if there is no g:termdebug_config: >
+	let g:termdebugger = "mygdb"
+
 If the command needs an argument use a List: >
+	let g:termdebug_config['command'] = ['rr', 'replay', '--']
+Or if there is no g:termdebug_config: >
 	let g:termdebugger = ['rr', 'replay', '--']
 
 To not use neovim floating windows for previewing variable evaluation, set the
@@ -406,7 +427,17 @@ cursor: >
 or set/unset a breakpoint: >
 	nnoremap <RightMouse> :Break<CR>
 
-<							*gdb-version*
+
+Several arguments will be added to make gdb work well for the debugger.
+If you want to modify them, add a function to filter the argument list: >
+	let g:termdebug_config['command_filter'] = MyDebugFilter
+
+If you do not want the arguments to be added, but you do need to set the
+"pty", use a function to add the necessary arguments: >
+	let g:termdebug_config['command_add_args'] = MyAddArguments
+The function will be called with the list of arguments so far, and a second
+argument that is the name of the pty.
+							*gdb-version*
 Only debuggers fully compatible with gdb will work.  Vim uses the GDB/MI
 interface.  The "new-ui" command  requires gdb version 7.12 or later.  if you
 get this error:
@@ -414,8 +445,8 @@ get this error:
 Then your gdb is too old.
 
 
-Colors						*hl-debugPC* *hl-debugBreakpoint*
-
+Colors~
+						*hl-debugPC* *hl-debugBreakpoint*
 The color of the signs can be adjusted with these highlight groups:
 - debugPC		the current position
 - debugBreakpoint	a breakpoint
@@ -439,16 +470,20 @@ The argument is the gdb command.
 
 Vim window width						*termdebug_wide*
 
-To change the width of the Vim window when debugging starts, and use a
-vertical split: >
-  let g:termdebug_wide = 163
-This will set &columns to 163 when `:Termdebug` is used.  The value is restored
-when quitting the debugger.
-If g:termdebug_wide is set and &columns is already larger than
-g:termdebug_wide then a vertical split will be used without changing &columns.
-Set it to 1 to get a vertical split without every changing &columns (useful
-for when the terminal can't be resized by Vim).
+To change the width of the Vim window when debugging starts and use a vertical
+split: >
+	let g:termdebug_config['wide'] = 163
+Or if there is no g:termdebug_config: >
+	let g:termdebug_wide = 163
 
+This will set 'columns' to 163 when `:Termdebug` is used.  The value is
+restored when quitting the debugger.
+
+If the wide value is set and 'columns' is already a greater value, then a
+vertical split will be used without modifying 'columns'.
+
+Set the wide value to 1 to use a vertical split without ever changing
+'columns'.  This is useful when the terminal can't be resized by Vim.
 
 
  vim:tw=78:ts=8:noet:ft=help:norl:

runtime/pack/dist/opt/termdebug/plugin/termdebug.vim

@@ -2,7 +2,7 @@
 "
 " Author: Bram Moolenaar
 " Copyright: Vim license applies, see ":help license"
-" Last Change: 2022 May 09
+" Last Change: 2022 May 23
 "
 " WORK IN PROGRESS - The basics works stable, more to come
 " Note: In general you need at least GDB 7.12 because this provides the
@@ -71,11 +71,6 @@ set cpo&vim
 command -nargs=* -complete=file -bang Termdebug call s:StartDebug(<bang>0, <f-args>)
 command -nargs=+ -complete=file -bang TermdebugCommand call s:StartDebugCommand(<bang>0, <f-args>)
 
-" Name of the gdb command, defaults to "gdb".
-if !exists('g:termdebugger')
-  let g:termdebugger = 'gdb'
-endif
-
 let s:pc_id = 12
 let s:asm_id = 13
 let s:break_id = 14  " breakpoint number is added to this
@@ -105,8 +100,17 @@ call s:Highlight(1, '', &background)
 hi default debugBreakpoint term=reverse ctermbg=red guibg=red
 hi default debugBreakpointDisabled term=reverse ctermbg=gray guibg=gray
 
+" Get the command to execute the debugger as a list, defaults to ["gdb"].
 func s:GetCommand()
-  return type(g:termdebugger) == v:t_list ? copy(g:termdebugger) : [g:termdebugger]
+  if exists('g:termdebug_config')
+    let cmd = get(g:termdebug_config, 'command', 'gdb')
+  elseif exists('g:termdebugger')
+    let cmd = g:termdebugger
+  else
+    let cmd = 'gdb'
+  endif
+
+  return type(cmd) == v:t_list ? copy(cmd) : [cmd]
 endfunc
 
 func s:StartDebug(bang, ...)
@@ -177,12 +181,10 @@ func s:StartDebug_internal(dict)
     call s:StartDebug_term(a:dict)
   endif
 
-  if exists('g:termdebug_disasm_window')
-    if g:termdebug_disasm_window
-      let curwinid = win_getid(winnr())
-      call s:GotoAsmwinOrCreateIt()
-      call win_gotoid(curwinid)
-    endif
+  if s:GetDisasmWindow()
+    let curwinid = win_getid(winnr())
+    call s:GotoAsmwinOrCreateIt()
+    call win_gotoid(curwinid)
   endif
 
   if exists('#User#TermdebugStartPost')
@@ -252,18 +254,28 @@ func s:StartDebug_term(dict)
   let proc_args = get(a:dict, 'proc_args', [])
 
   let gdb_cmd = s:GetCommand()
-  " Add -quiet to avoid the intro message causing a hit-enter prompt.
-  let gdb_cmd += ['-quiet']
-  " Disable pagination, it causes everything to stop at the gdb
-  let gdb_cmd += ['-iex', 'set pagination off']
-  " Interpret commands while the target is running.  This should usually only
-  " be exec-interrupt, since many commands don't work properly while the
-  " target is running (so execute during startup).
-  let gdb_cmd += ['-iex', 'set mi-async on']
-  " Open a terminal window to run the debugger.
-  let gdb_cmd += ['-tty', pty]
-  " Command executed _after_ startup is done, provides us with the necessary feedback
-  let gdb_cmd += ['-ex', 'echo startupdone\n']
+
+  if exists('g:termdebug_config') && has_key(g:termdebug_config, 'command_add_args')
+    let gdb_cmd = g:termdebug_config.command_add_args(gdb_cmd, pty)
+  else
+    " Add -quiet to avoid the intro message causing a hit-enter prompt.
+    let gdb_cmd += ['-quiet']
+    " Disable pagination, it causes everything to stop at the gdb
+    let gdb_cmd += ['-iex', 'set pagination off']
+    " Interpret commands while the target is running.  This should usually only
+    " be exec-interrupt, since many commands don't work properly while the
+    " target is running (so execute during startup).
+    let gdb_cmd += ['-iex', 'set mi-async on']
+    " Open a terminal window to run the debugger.
+    let gdb_cmd += ['-tty', pty]
+    " Command executed _after_ startup is done, provides us with the necessary
+    " feedback
+    let gdb_cmd += ['-ex', 'echo startupdone\n']
+  endif
+
+  if exists('g:termdebug_config') && has_key(g:termdebug_config, 'command_filter')
+    let gdb_cmd = g:termdebug_config.command_filter(gdb_cmd)
+  endif
 
   " Adding arguments requested by the user
   let gdb_cmd += gdb_args
@@ -871,7 +883,13 @@ func s:InstallCommands()
   command Asm call s:GotoAsmwinOrCreateIt()
   command Winbar call s:InstallWinbar()
 
-  if !exists('g:termdebug_map_K') || g:termdebug_map_K
+  let map = 1
+  if exists('g:termdebug_config')
+    let map = get(g:termdebug_config, 'map_K', 1)
+  elseif exists('g:termdebug_map_K')
+    let map = g:termdebug_map_K
+  endif
+  if map
     " let s:k_map_saved = maparg('K', 'n', 0, 1)
     let s:k_map_saved = {}
     for map in nvim_get_keymap('n')
@@ -1280,6 +1298,26 @@ func s:GotoSourcewinOrCreateIt()
   endif
 endfunc
 
+func s:GetDisasmWindow()
+  if exists('g:termdebug_config')
+    return get(g:termdebug_config, 'disasm_window', 0)
+  endif
+  if exists('g:termdebug_disasm_window')
+    return g:termdebug_disasm_window
+  endif
+  return 0
+endfunc
+
+func s:GetDisasmWindowHeight()
+  if exists('g:termdebug_config')
+    return get(g:termdebug_config, 'disasm_window_height', 0)
+  endif
+  if exists('g:termdebug_disasm_window') && g:termdebug_disasm_window > 1
+    return g:termdebug_disasm_window
+  endif
+  return 0
+endfunc
+
 func s:GotoAsmwinOrCreateIt()
   if !win_gotoid(s:asmwin)
     if win_gotoid(s:sourcewin)
@@ -1303,10 +1341,8 @@ func s:GotoAsmwinOrCreateIt()
       exe 'file Termdebug-asm-listing'
     endif
 
-    if exists('g:termdebug_disasm_window')
-      if g:termdebug_disasm_window > 1
-        exe 'resize ' . g:termdebug_disasm_window
-      endif
+    if s:GetDisasmWindowHeight() > 0
+      exe 'resize ' .. s:GetDisasmWindowHeight()
     endif
   endif
 

scripts/vim-patch.sh

@@ -243,6 +243,10 @@ preprocess_patch() {
   LC_ALL=C sed -e 's/\( [ab]\/src\/nvim\)\/keymap\.h/\1\/keycodes.h/g' \
     "$file" > "$file".tmp && mv "$file".tmp "$file"
 
+  # Rename terminal.txt to nvim_terminal_emulator.txt
+  LC_ALL=C sed -e 's/\( [ab]\/runtime\/doc\)\/terminal\.txt/\1\/nvim_terminal_emulator.txt/g' \
+    "$file" > "$file".tmp && mv "$file".tmp "$file"
+
   # Rename test_urls.vim to check_urls.vim
   LC_ALL=C sed -e 's@\( [ab]\)/runtime/doc/test\(_urls\.vim\)@\1/scripts/check\2@g' \
     "$file" > "$file".tmp && mv "$file".tmp "$file"