vim-patch:9.0.0391: using separate delete() call instead of writefile() 'D' flag

Problem:    Using separate delete() call instead of writefile() 'D' flag.
Solution:   Use the writefile 'D' flag.

3411265a36

Co-authored-by: Bram Moolenaar <Bram@vim.org>

test/old/testdir/test_backup.vim

@@ -79,11 +79,11 @@ endfunc
 func Test_non_existing_backupdir()
   throw 'Skipped: Nvim auto-creates backup directory'
   set backupdir=./non_existing_dir backupskip=
-  call writefile(['line1'], 'Xbackupdir')
+  call writefile(['line1'], 'Xbackupdir', 'D')
   new Xbackupdir
   call assert_fails('write', 'E510:')
+
   set backupdir&vim backupskip&vim
-  call delete('Xbackupdir')
 endfunc
 
 " vim: shiftwidth=2 sts=2 expandtab

test/old/testdir/test_breakindent.vim

@@ -942,14 +942,13 @@ func Test_cursor_position_with_showbreak()
       repeat('x', &columns - leftcol - 1)->setline(1)
       'second line'->setline(2)
   END
-  call writefile(lines, 'XscriptShowbreak')
+  call writefile(lines, 'XscriptShowbreak', 'D')
   let buf = RunVimInTerminal('-S XscriptShowbreak', #{rows: 6})
 
   call term_sendkeys(buf, "AX")
   call VerifyScreenDump(buf, 'Test_cursor_position_with_showbreak', {})
 
   call StopVimInTerminal(buf)
-  call delete('XscriptShowbreak')
 endfunc
 
 func Test_no_spurious_match()

test/old/testdir/test_buffer.vim

@@ -5,64 +5,60 @@ source check.vim
 " Test for the :bunload command with an offset
 func Test_bunload_with_offset()
   %bwipe!
-  call writefile(['B1'], 'b1')
-  call writefile(['B2'], 'b2')
-  call writefile(['B3'], 'b3')
-  call writefile(['B4'], 'b4')
+  call writefile(['B1'], 'Xb1', 'D')
+  call writefile(['B2'], 'Xb2', 'D')
+  call writefile(['B3'], 'Xb3', 'D')
+  call writefile(['B4'], 'Xb4', 'D')
 
   " Load four buffers. Unload the second and third buffers and then
   " execute .+3bunload to unload the last buffer.
-  edit b1
-  new b2
-  new b3
-  new b4
+  edit Xb1
+  new Xb2
+  new Xb3
+  new Xb4
 
-  bunload b2
-  bunload b3
-  exe bufwinnr('b1') . 'wincmd w'
+  bunload Xb2
+  bunload Xb3
+  exe bufwinnr('Xb1') . 'wincmd w'
   .+3bunload
-  call assert_equal(0, getbufinfo('b4')[0].loaded)
-  call assert_equal('b1',
+  call assert_equal(0, getbufinfo('Xb4')[0].loaded)
+  call assert_equal('Xb1',
         \ fnamemodify(getbufinfo({'bufloaded' : 1})[0].name, ':t'))
 
   " Load four buffers. Unload the third and fourth buffers. Execute .+3bunload
   " and check whether the second buffer is unloaded.
   ball
-  bunload b3
-  bunload b4
-  exe bufwinnr('b1') . 'wincmd w'
+  bunload Xb3
+  bunload Xb4
+  exe bufwinnr('Xb1') . 'wincmd w'
   .+3bunload
-  call assert_equal(0, getbufinfo('b2')[0].loaded)
-  call assert_equal('b1',
+  call assert_equal(0, getbufinfo('Xb2')[0].loaded)
+  call assert_equal('Xb1',
         \ fnamemodify(getbufinfo({'bufloaded' : 1})[0].name, ':t'))
 
   " Load four buffers. Unload the second and third buffers and from the last
   " buffer execute .-3bunload to unload the first buffer.
   ball
-  bunload b2
-  bunload b3
-  exe bufwinnr('b4') . 'wincmd w'
+  bunload Xb2
+  bunload Xb3
+  exe bufwinnr('Xb4') . 'wincmd w'
   .-3bunload
-  call assert_equal(0, getbufinfo('b1')[0].loaded)
-  call assert_equal('b4',
+  call assert_equal(0, getbufinfo('Xb1')[0].loaded)
+  call assert_equal('Xb4',
         \ fnamemodify(getbufinfo({'bufloaded' : 1})[0].name, ':t'))
 
   " Load four buffers. Unload the first and second buffers. Execute .-3bunload
   " from the last buffer and check whether the third buffer is unloaded.
   ball
-  bunload b1
-  bunload b2
-  exe bufwinnr('b4') . 'wincmd w'
+  bunload Xb1
+  bunload Xb2
+  exe bufwinnr('Xb4') . 'wincmd w'
   .-3bunload
-  call assert_equal(0, getbufinfo('b3')[0].loaded)
-  call assert_equal('b4',
+  call assert_equal(0, getbufinfo('Xb3')[0].loaded)
+  call assert_equal('Xb4',
         \ fnamemodify(getbufinfo({'bufloaded' : 1})[0].name, ':t'))
 
   %bwipe!
-  call delete('b1')
-  call delete('b2')
-  call delete('b3')
-  call delete('b4')
 
   call assert_fails('1,4bunload', 'E16:')
   call assert_fails(',100bunload', 'E16:')
@@ -76,9 +72,9 @@ func Test_buflist_browse()
   %bwipe!
   call assert_fails('buffer 1000', 'E86:')
 
-  call writefile(['foo1', 'foo2', 'foo3', 'foo4'], 'Xbrowse1')
-  call writefile(['bar1', 'bar2', 'bar3', 'bar4'], 'Xbrowse2')
-  call writefile(['baz1', 'baz2', 'baz3', 'baz4'], 'Xbrowse3')
+  call writefile(['foo1', 'foo2', 'foo3', 'foo4'], 'Xbrowse1', 'D')
+  call writefile(['bar1', 'bar2', 'bar3', 'bar4'], 'Xbrowse2', 'D')
+  call writefile(['baz1', 'baz2', 'baz3', 'baz4'], 'Xbrowse3', 'D')
   edit Xbrowse1
   let b1 = bufnr()
   edit Xbrowse2
@@ -127,9 +123,6 @@ func Test_buflist_browse()
 
   call assert_fails('sandbox bnext', 'E48:')
 
-  call delete('Xbrowse1')
-  call delete('Xbrowse2')
-  call delete('Xbrowse3')
   %bwipe!
 endfunc
 
@@ -200,13 +193,13 @@ endfunc
 " Test for quitting the 'swapfile exists' dialog with the split buffer
 " command.
 func Test_buffer_sbuf_cleanup()
-  call writefile([], 'XsplitCleanup')
+  call writefile([], 'XsplitCleanup', 'D')
   " first open the file in a buffer
   new XsplitCleanup
   let bnr = bufnr()
   close
   " create the swap file
-  call writefile([], '.XsplitCleanup.swp')
+  call writefile([], '.XsplitCleanup.swp', 'D')
   " Remove the catch-all that runtest.vim adds
   au! SwapExists
   augroup BufTest
@@ -231,8 +224,6 @@ func Test_buffer_sbuf_cleanup()
   call assert_equal(0, getbufinfo('XsplitCleanup')[0].loaded)
   set shortmess&
 
-  call delete('XsplitCleanup')
-  call delete('.XsplitCleanup.swp')
   augroup BufTest
     au!
   augroup END
@@ -329,8 +320,8 @@ endfunc
 " Test for using CTRL-^ to edit the alternative file keeping the cursor
 " position with 'nostartofline'. Also test using the 'buf' command.
 func Test_buffer_edit_altfile()
-  call writefile(repeat(['one two'], 50), 'Xaltfile1')
-  call writefile(repeat(['five six'], 50), 'Xaltfile2')
+  call writefile(repeat(['one two'], 50), 'Xaltfile1', 'D')
+  call writefile(repeat(['five six'], 50), 'Xaltfile2', 'D')
   set nosol
   edit Xaltfile1
   call cursor(25, 5)
@@ -345,8 +336,6 @@ func Test_buffer_edit_altfile()
   buf Xaltfile2
   call assert_equal([0, 30, 4, 0], getpos('.'))
   set sol&
-  call delete('Xaltfile1')
-  call delete('Xaltfile2')
 endfunc
 
 " Test for running the :sball command with a maximum window count and a
@@ -499,7 +488,7 @@ func Test_buflist_alloc_failure()
   call assert_fails('%bw!', 'E342:')
 
   " test for :checktime loading the buffer
-  call writefile(['one'], 'XallocFail5')
+  call writefile(['one'], 'XallocFail5', 'D')
   if has('unix')
     edit XallocFail5
     " sleep for some time to make sure the timestamp is different
@@ -515,7 +504,6 @@ func Test_buflist_alloc_failure()
   " test for :vimgrep loading a dummy buffer
   call test_alloc_fail(GetAllocId('newbuf_bvars'), 0, 0)
   call assert_fails('vimgrep two XallocFail5', 'E342:')
-  call delete('XallocFail5')
 
   " test for quickfix command loading a buffer
   call test_alloc_fail(GetAllocId('newbuf_bvars'), 0, 0)

test/old/testdir/test_bufline.vim

@@ -86,11 +86,10 @@ func Test_setline_startup()
   if cmd == ''
     return
   endif
-  call writefile(['call setline(1, "Hello")', 'silent w Xtest', 'q!'], 'Xscript')
+  call writefile(['call setline(1, "Hello")', 'silent w Xtest', 'q!'], 'Xscript', 'D')
   call system(cmd)
   call assert_equal(['Hello'], readfile('Xtest'))
 
-  call delete('Xscript')
   call delete('Xtest')
 endfunc
 
@@ -215,12 +214,11 @@ func Test_appendbufline_redraw()
     call deletebufline(buf, 1, '$')
     call appendbufline(buf, '$', 'Hello Vim world...')
   END
-  call writefile(lines, 'XscriptMatchCommon')
+  call writefile(lines, 'XscriptMatchCommon', 'D')
   let buf = RunVimInTerminal('-S XscriptMatchCommon', #{rows: 10})
   call VerifyScreenDump(buf, 'Test_appendbufline_1', {})
 
   call StopVimInTerminal(buf)
-  call delete('XscriptMatchCommon')
 endfunc
 
 func Test_setbufline_select_mode()