neovim/runtime/lua/vim/_defaults.lua

--- Default mappings
do
  --- Default maps for * and # in visual mode.
  ---
  --- See |v_star-default| and |v_#-default|
  do
    local function region_chunks(region)
      local chunks = {}
      local maxcol = vim.v.maxcol
      for line, cols in vim.spairs(region) do
        local endcol = cols[2] == maxcol and -1 or cols[2]
        local chunk = vim.api.nvim_buf_get_text(0, line, cols[1], line, endcol, {})[1]
        table.insert(chunks, chunk)
      end
      return chunks
    end

    local function _visual_search(cmd)
      assert(cmd == '/' or cmd == '?')
      local region = vim.region(
        0,
        '.',
        'v',
        vim.api.nvim_get_mode().mode:sub(1, 1),
        vim.o.selection == 'inclusive'
      )
      local chunks = region_chunks(region)
      local esc_chunks = vim
        .iter(chunks)
        :map(function(v)
          return vim.fn.escape(v, cmd == '/' and [[/\]] or [[?\]])
        end)
        :totable()
      local esc_pat = table.concat(esc_chunks, [[\n]])
      local search_cmd = ([[%s\V%s%s]]):format(cmd, esc_pat, '\n')
      return '\27' .. search_cmd
    end

    vim.keymap.set('x', '*', function()
      return _visual_search('/')
    end, { desc = ':help v_star-default', expr = true, silent = true })
    vim.keymap.set('x', '#', function()
      return _visual_search('?')
    end, { desc = ':help v_#-default', expr = true, silent = true })
  end

  --- Map Y to y$. This mimics the behavior of D and C. See |Y-default|
  vim.keymap.set('n', 'Y', 'y$', { desc = ':help Y-default' })

  --- Use normal! <C-L> to prevent inserting raw <C-L> when using i_<C-O>. #17473
  ---
  --- See |CTRL-L-default|
  vim.keymap.set('n', '<C-L>', '<Cmd>nohlsearch<Bar>diffupdate<Bar>normal! <C-L><CR>', {
    desc = ':help CTRL-L-default',
  })

  --- Set undo points when deleting text in insert mode.
  ---
  --- See |i_CTRL-U-default| and |i_CTRL-W-default|
  vim.keymap.set('i', '<C-U>', '<C-G>u<C-U>', { desc = ':help i_CTRL-U-default' })
  vim.keymap.set('i', '<C-W>', '<C-G>u<C-W>', { desc = ':help i_CTRL-W-default' })

  --- Use the same flags as the previous substitution with &.
  ---
  --- Use : instead of <Cmd> so that ranges are supported. #19365
  ---
  --- See |&-default|
  vim.keymap.set('n', '&', ':&&<CR>', { desc = ':help &-default' })

  --- Use Q in visual mode to execute a macro on each line of the selection. #21422
  ---
  --- Applies to @x and includes @@ too.
  vim.keymap.set(
    'x',
    'Q',
    ':normal! @<C-R>=reg_recorded()<CR><CR>',
    { silent = true, desc = ':help v_Q-default' }
  )
  vim.keymap.set(
    'x',
    '@',
    "':normal! @'.getcharstr().'<CR>'",
    { silent = true, expr = true, desc = ':help v_@-default' }
  )
  --- Map |gx| to call |vim.ui.open| on the identifier under the cursor
  do
    -- TODO: use vim.region() when it lands... #13896 #16843
    local function get_visual_selection()
      local save_a = vim.fn.getreginfo('a')
      vim.cmd([[norm! "ay]])
      local selection = vim.fn.getreg('a', 1)
      vim.fn.setreg('a', save_a)
      return selection
    end

    local function do_open(uri)
      local _, err = vim.ui.open(uri)
      if err then
        vim.notify(err, vim.log.levels.ERROR)
      end
    end

    local gx_desc =
      'Opens filepath or URI under cursor with the system handler (file explorer, web browser, …)'
    vim.keymap.set({ 'n' }, 'gx', function()
      do_open(vim.fn.expand('<cfile>'))
    end, { desc = gx_desc })
    vim.keymap.set({ 'x' }, 'gx', function()
      do_open(get_visual_selection())
    end, { desc = gx_desc })
  end
end

--- Default menus
do
  --- Right click popup menu
  -- TODO VimScript, no l10n
  vim.cmd([[
    aunmenu *
    vnoremenu PopUp.Cut                     "+x
    vnoremenu PopUp.Copy                    "+y
    anoremenu PopUp.Paste                   "+gP
    vnoremenu PopUp.Paste                   "+P
    vnoremenu PopUp.Delete                  "_x
    nnoremenu PopUp.Select\ All             ggVG
    vnoremenu PopUp.Select\ All             gg0oG$
    inoremenu PopUp.Select\ All             <C-Home><C-O>VG
    anoremenu PopUp.-1-                     <Nop>
    anoremenu PopUp.How-to\ disable\ mouse  <Cmd>help disable-mouse<CR>
  ]])
end

--- Default autocommands. See |default-autocmds|
do
  local nvim_terminal_augroup = vim.api.nvim_create_augroup('nvim_terminal', {})
  vim.api.nvim_create_autocmd('BufReadCmd', {
    pattern = 'term://*',
    group = nvim_terminal_augroup,
    desc = 'Treat term:// buffers as terminal buffers',
    nested = true,
    command = "if !exists('b:term_title')|call termopen(matchstr(expand(\"<amatch>\"), '\\c\\mterm://\\%(.\\{-}//\\%(\\d\\+:\\)\\?\\)\\?\\zs.*'), {'cwd': expand(get(matchlist(expand(\"<amatch>\"), '\\c\\mterm://\\(.\\{-}\\)//'), 1, ''))})",
  })

  vim.api.nvim_create_autocmd({ 'TermClose' }, {
    group = nvim_terminal_augroup,
    desc = 'Automatically close terminal buffers when started with no arguments and exiting without an error',
    callback = function(args)
      if vim.v.event.status == 0 then
        local info = vim.api.nvim_get_chan_info(vim.bo[args.buf].channel)
        local argv = info.argv or {}
        if #argv == 1 and argv[1] == vim.o.shell then
          vim.cmd({ cmd = 'bdelete', args = { args.buf }, bang = true })
        end
      end
    end,
  })

  vim.api.nvim_create_autocmd('TermRequest', {
    group = nvim_terminal_augroup,
    desc = 'Respond to OSC foreground/background color requests',
    callback = function(args)
      local fg_request = args.data == '\027]10;?'
      local bg_request = args.data == '\027]11;?'
      if fg_request or bg_request then
        -- WARN: This does not return the actual foreground/background color,
        -- but rather returns:
        --   - fg=white/bg=black when Nvim option 'background' is 'dark'
        --   - fg=black/bg=white when Nvim option 'background' is 'light'
        local red, green, blue = 0, 0, 0
        local bg_option_dark = vim.o.background == 'dark'
        if (fg_request and bg_option_dark) or (bg_request and not bg_option_dark) then
          red, green, blue = 65535, 65535, 65535
        end
        local command = fg_request and 10 or 11
        local data = string.format('\027]%d;rgb:%04x/%04x/%04x\007', command, red, green, blue)
        local channel = vim.bo[args.buf].channel
        vim.api.nvim_chan_send(channel, data)
      end
    end,
  })

  vim.api.nvim_create_autocmd('CmdwinEnter', {
    pattern = '[:>]',
    desc = 'Limit syntax sync to maxlines=1 in the command window',
    group = vim.api.nvim_create_augroup('nvim_cmdwin', {}),
    command = 'syntax sync minlines=1 maxlines=1',
  })

  vim.api.nvim_create_autocmd('SwapExists', {
    pattern = '*',
    desc = 'Skip the swapfile prompt when the swapfile is owned by a running Nvim process',
    group = vim.api.nvim_create_augroup('nvim_swapfile', {}),
    callback = function()
      local info = vim.fn.swapinfo(vim.v.swapname)
      local user = vim.uv.os_get_passwd().username
      local iswin = 1 == vim.fn.has('win32')
      if info.error or info.pid <= 0 or (not iswin and info.user ~= user) then
        vim.v.swapchoice = '' -- Show the prompt.
        return
      end
      vim.v.swapchoice = 'e' -- Choose "(E)dit".
      vim.notify(('W325: Ignoring swapfile from Nvim process %d'):format(info.pid))
    end,
  })
end

-- Only do the following when the TUI is attached
local tty = nil
for _, ui in ipairs(vim.api.nvim_list_uis()) do
  if ui.chan == 1 and ui.stdout_tty then
    tty = ui
    break
  end
end

if tty then
  local group = vim.api.nvim_create_augroup('nvim_tty', {})

  --- Set an option after startup (so that OptionSet is fired), but only if not
  --- already set by the user.
  ---
  --- @param option string Option name
  --- @param value any Option value
  local function setoption(option, value)
    if vim.api.nvim_get_option_info2(option, {}).was_set then
      -- Don't do anything if option is already set
      return
    end

    -- Wait until Nvim is finished starting to set the option to ensure the
    -- OptionSet event fires.
    if vim.v.vim_did_enter == 1 then
      vim.o[option] = value
    else
      vim.api.nvim_create_autocmd('VimEnter', {
        group = group,
        once = true,
        nested = true,
        callback = function()
          setoption(option, value)
        end,
      })
    end
  end

  --- Guess value of 'background' based on terminal color.
  ---
  --- We write Operating System Command (OSC) 11 to the terminal to request the
  --- terminal's background color. We then wait for a response. If the response
  --- matches `rgba:RRRR/GGGG/BBBB/AAAA` where R, G, B, and A are hex digits, then
  --- compute the luminance[1] of the RGB color and classify it as light/dark
  --- accordingly. Note that the color components may have anywhere from one to
  --- four hex digits, and require scaling accordingly as values out of 4, 8, 12,
  --- or 16 bits. Also note the A(lpha) component is optional, and is parsed but
  --- ignored in the calculations.
  ---
  --- [1] https://en.wikipedia.org/wiki/Luma_%28video%29
  do
    --- Parse a string of hex characters as a color.
    ---
    --- The string can contain 1 to 4 hex characters. The returned value is
    --- between 0.0 and 1.0 (inclusive) representing the intensity of the color.
    ---
    --- For instance, if only a single hex char "a" is used, then this function
    --- returns 0.625 (10 / 16), while a value of "aa" would return 0.664 (170 /
    --- 256).
    ---
    --- @param c string Color as a string of hex chars
    --- @return number? Intensity of the color
    local function parsecolor(c)
      if #c == 0 or #c > 4 then
        return nil
      end

      local val = tonumber(c, 16)
      if not val then
        return nil
      end

      local max = tonumber(string.rep('f', #c), 16)
      return val / max
    end

    --- Parse an OSC 11 response
    ---
    --- Either of the two formats below are accepted:
    ---
    ---   OSC 11 ; rgb:<red>/<green>/<blue>
    ---
    --- or
    ---
    ---   OSC 11 ; rgba:<red>/<green>/<blue>/<alpha>
    ---
    --- where
    ---
    ---   <red>, <green>, <blue>, <alpha> := h | hh | hhh | hhhh
    ---
    --- The alpha component is ignored, if present.
    ---
    --- @param resp string OSC 11 response
    --- @return string? Red component
    --- @return string? Green component
    --- @return string? Blue component
    local function parseosc11(resp)
      local r, g, b
      r, g, b = resp:match('^\027%]11;rgb:(%x+)/(%x+)/(%x+)$')
      if not r and not g and not b then
        local a
        r, g, b, a = resp:match('^\027%]11;rgba:(%x+)/(%x+)/(%x+)/(%x+)$')
        if not a or #a > 4 then
          return nil, nil, nil
        end
      end

      if r and g and b and #r <= 4 and #g <= 4 and #b <= 4 then
        return r, g, b
      end

      return nil, nil, nil
    end

    local timer = assert(vim.uv.new_timer())

    local id = vim.api.nvim_create_autocmd('TermResponse', {
      group = group,
      nested = true,
      callback = function(args)
        local resp = args.data ---@type string
        local r, g, b = parseosc11(resp)
        if r and g and b then
          local rr = parsecolor(r)
          local gg = parsecolor(g)
          local bb = parsecolor(b)

          if rr and gg and bb then
            local luminance = (0.299 * rr) + (0.587 * gg) + (0.114 * bb)
            local bg = luminance < 0.5 and 'dark' or 'light'
            setoption('background', bg)
          end

          return true
        end
      end,
    })

    local query = '\027]11;?\007'

    -- tmux 3.3a and earlier do not query the parent terminal for background color. As of the
    -- writing of this comment, 3.3a is the latest release, so a passthrough sequence is necessary.
    -- The passthrough should be removed as soon as a tmux version later than 3.3a is released.
    -- See: https://github.com/neovim/neovim/pull/26557
    if os.getenv('TMUX') then
      query = string.format('\027Ptmux;%s\027\\', query:gsub('\027', '\027\027'))
    end

    io.stdout:write(query)

    timer:start(1000, 0, function()
      -- Delete the autocommand if no response was received
      vim.schedule(function()
        -- Suppress error if autocommand has already been deleted
        pcall(vim.api.nvim_del_autocmd, id)
      end)

      if not timer:is_closing() then
        timer:close()
      end
    end)
  end

  --- If the TUI (term_has_truecolor) was able to determine that the host
  --- terminal supports truecolor, enable 'termguicolors'. Otherwise, query the
  --- terminal (using both XTGETTCAP and SGR + DECRQSS). If the terminal's
  --- response indicates that it does support truecolor enable 'termguicolors',
  --- but only if the user has not already disabled it.
  do
    if tty.rgb then
      -- The TUI was able to determine truecolor support
      setoption('termguicolors', true)
    else
      local caps = {} ---@type table<string, boolean>
      require('vim.termcap').query({ 'Tc', 'RGB', 'setrgbf', 'setrgbb' }, function(cap, found)
        if not found then
          return
        end

        caps[cap] = true
        if caps.Tc or caps.RGB or (caps.setrgbf and caps.setrgbb) then
          setoption('termguicolors', true)
        end
      end)

      local timer = assert(vim.uv.new_timer())

      -- Arbitrary colors to set in the SGR sequence
      local r = 1
      local g = 2
      local b = 3

      local id = vim.api.nvim_create_autocmd('TermResponse', {
        group = group,
        nested = true,
        callback = function(args)
          local resp = args.data ---@type string
          local decrqss = resp:match('^\027P1%$r([%d;:]+)m$')

          if decrqss then
            -- The DECRQSS SGR response first contains attributes separated by
            -- semicolons, followed by the SGR itself with parameters separated
            -- by colons. Some terminals include "0" in the attribute list
            -- unconditionally; others do not. Our SGR sequence did not set any
            -- attributes, so there should be no attributes in the list.
            local attrs = vim.split(decrqss, ';')
            if #attrs ~= 1 and (#attrs ~= 2 or attrs[1] ~= '0') then
              return true
            end

            -- The returned SGR sequence should begin with 48:2
            local sgr = attrs[#attrs]:match('^48:2:([%d:]+)$')
            if not sgr then
              return true
            end

            -- The remaining elements of the SGR sequence should be the 3 colors
            -- we set. Some terminals also include an additional parameter
            -- (which can even be empty!), so handle those cases as well
            local params = vim.split(sgr, ':')
            if #params ~= 3 and (#params ~= 4 or (params[1] ~= '' and params[1] ~= '1')) then
              return true
            end

            if
              tonumber(params[#params - 2]) == r
              and tonumber(params[#params - 1]) == g
              and tonumber(params[#params]) == b
            then
              setoption('termguicolors', true)
            end

            return true
          end
        end,
      })

      -- Write SGR followed by DECRQSS. This sets the background color then
      -- immediately asks the terminal what the background color is. If the
      -- terminal responds to the DECRQSS with the same SGR sequence that we
      -- sent then the terminal supports truecolor.
      local decrqss = '\027P$qm\027\\'
      if os.getenv('TMUX') then
        decrqss = string.format('\027Ptmux;%s\027\\', decrqss:gsub('\027', '\027\027'))
      end
      io.stdout:write(string.format('\027[48;2;%d;%d;%dm%s', r, g, b, decrqss))

      timer:start(1000, 0, function()
        -- Delete the autocommand if no response was received
        vim.schedule(function()
          -- Suppress error if autocommand has already been deleted
          pcall(vim.api.nvim_del_autocmd, id)
        end)

        if not timer:is_closing() then
          timer:close()
        end
      end)
    end
  end
end