kevin/linux
1
Fork 0
Code
fc6c5bc7c1
linux/drivers/ide/pci/scc_pata.c
Bartlomiej Zolnierkiewicz bfa14b42a3 ide: add ->cable_detect method to ide_hwif_t 
* Add ->cable_detect method to ide_hwif_t.

* Call the new method in ide_init_port() if:
  - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
  - DMA initialization was successful (if hwif->dma_base is not set
    ide_init_port() sets hwif->ultra_mask to zero)
  - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')

* Convert PCI host drivers to use ->cable_detect method.

While at it:

* Factor out cable detection to separate functions (if not already done).

* hpt366.c/it8213.c/slc90e66.c:
  - don't check cable type if "idex=ata66" is used

* pdc202xx_new.c:
  - add __devinit tag to pdcnew_cable_detect()

* pdc202xx_old.c:
  - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
  - add __devinit tag to pdc2026x_old_cable_detect()

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:31 +01:00

779 lines
20 KiB
C
Raw Blame History

/*
* Support for IDE interfaces on Celleb platform
*
* (C) Copyright 2006 TOSHIBA CORPORATION
*
* This code is based on drivers/ide/pci/siimage.c:
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
#define SCC_PATA_NAME "scc IDE"
#define TDVHSEL_MASTER 0x00000001
#define TDVHSEL_SLAVE 0x00000004
#define MODE_JCUSFEN 0x00000080
#define CCKCTRL_ATARESET 0x00040000
#define CCKCTRL_BUFCNT 0x00020000
#define CCKCTRL_CRST 0x00010000
#define CCKCTRL_OCLKEN 0x00000100
#define CCKCTRL_ATACLKOEN 0x00000002
#define CCKCTRL_LCLKEN 0x00000001
#define QCHCD_IOS_SS 0x00000001
#define QCHSD_STPDIAG 0x00020000
#define INTMASK_MSK 0xD1000012
#define INTSTS_SERROR 0x80000000
#define INTSTS_PRERR 0x40000000
#define INTSTS_RERR 0x10000000
#define INTSTS_ICERR 0x01000000
#define INTSTS_BMSINT 0x00000010
#define INTSTS_BMHE 0x00000008
#define INTSTS_IOIRQS 0x00000004
#define INTSTS_INTRQ 0x00000002
#define INTSTS_ACTEINT 0x00000001
#define ECMODE_VALUE 0x01
static struct scc_ports {
unsigned long ctl, dma;
unsigned char hwif_id; /* for removing hwif from system */
} scc_ports[MAX_HWIFS];
/* PIO transfer mode table */
/* JCHST */
static unsigned long JCHSTtbl[2][7] = {
{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
};
/* JCHHT */
static unsigned long JCHHTtbl[2][7] = {
{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
};
/* JCHCT */
static unsigned long JCHCTtbl[2][7] = {
{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
};
/* DMA transfer mode table */
/* JCHDCTM/JCHDCTS */
static unsigned long JCHDCTxtbl[2][7] = {
{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
};
/* JCSTWTM/JCSTWTS */
static unsigned long JCSTWTxtbl[2][7] = {
{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
};
/* JCTSS */
static unsigned long JCTSStbl[2][7] = {
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
};
/* JCENVT */
static unsigned long JCENVTtbl[2][7] = {
{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
};
/* JCACTSELS/JCACTSELM */
static unsigned long JCACTSELtbl[2][7] = {
{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
};
static u8 scc_ide_inb(unsigned long port)
{
u32 data = in_be32((void*)port);
return (u8)data;
}
static u16 scc_ide_inw(unsigned long port)
{
u32 data = in_be32((void*)port);
return (u16)data;
}
static void scc_ide_insw(unsigned long port, void *addr, u32 count)
{
u16 *ptr = (u16 *)addr;
while (count--) {
*ptr++ = le16_to_cpu(in_be32((void*)port));
}
}
static void scc_ide_insl(unsigned long port, void *addr, u32 count)
{
u16 *ptr = (u16 *)addr;
while (count--) {
*ptr++ = le16_to_cpu(in_be32((void*)port));
*ptr++ = le16_to_cpu(in_be32((void*)port));
}
}
static void scc_ide_outb(u8 addr, unsigned long port)
{
out_be32((void*)port, addr);
}
static void scc_ide_outw(u16 addr, unsigned long port)
{
out_be32((void*)port, addr);
}
static void
scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
{
ide_hwif_t *hwif = HWIF(drive);
out_be32((void*)port, addr);
eieio();
in_be32((void*)(hwif->dma_base + 0x01c));
eieio();
}
static void
scc_ide_outsw(unsigned long port, void *addr, u32 count)
{
u16 *ptr = (u16 *)addr;
while (count--) {
out_be32((void*)port, cpu_to_le16(*ptr++));
}
}
static void
scc_ide_outsl(unsigned long port, void *addr, u32 count)
{
u16 *ptr = (u16 *)addr;
while (count--) {
out_be32((void*)port, cpu_to_le16(*ptr++));
out_be32((void*)port, cpu_to_le16(*ptr++));
}
}
/**
* scc_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Load the timing settings for this device mode into the
* controller.
*/
static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct scc_ports *ports = ide_get_hwifdata(hwif);
unsigned long ctl_base = ports->ctl;
unsigned long cckctrl_port = ctl_base + 0xff0;
unsigned long piosht_port = ctl_base + 0x000;
unsigned long pioct_port = ctl_base + 0x004;
unsigned long reg;
int offset;
reg = in_be32((void __iomem *)cckctrl_port);
if (reg & CCKCTRL_ATACLKOEN) {
offset = 1; /* 133MHz */
} else {
offset = 0; /* 100MHz */
}
reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
out_be32((void __iomem *)piosht_port, reg);
reg = JCHCTtbl[offset][pio];
out_be32((void __iomem *)pioct_port, reg);
}
/**
* scc_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Load the timing settings for this device mode into the
* controller.
*/
static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct scc_ports *ports = ide_get_hwifdata(hwif);
unsigned long ctl_base = ports->ctl;
unsigned long cckctrl_port = ctl_base + 0xff0;
unsigned long mdmact_port = ctl_base + 0x008;
unsigned long mcrcst_port = ctl_base + 0x00c;
unsigned long sdmact_port = ctl_base + 0x010;
unsigned long scrcst_port = ctl_base + 0x014;
unsigned long udenvt_port = ctl_base + 0x018;
unsigned long tdvhsel_port = ctl_base + 0x020;
int is_slave = (&hwif->drives[1] == drive);
int offset, idx;
unsigned long reg;
unsigned long jcactsel;
reg = in_be32((void __iomem *)cckctrl_port);
if (reg & CCKCTRL_ATACLKOEN) {
offset = 1; /* 133MHz */
} else {
offset = 0; /* 100MHz */
}
idx = speed - XFER_UDMA_0;
jcactsel = JCACTSELtbl[offset][idx];
if (is_slave) {
out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
jcactsel = jcactsel << 2;
out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
} else {
out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
}
reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
out_be32((void __iomem *)udenvt_port, reg);
}
/**
* scc_ide_dma_setup - begin a DMA phase
* @drive: target device
*
* Build an IDE DMA PRD (IDE speak for scatter gather table)
* and then set up the DMA transfer registers.
*
* Returns 0 on success. If a PIO fallback is required then 1
* is returned.
*/
static int scc_dma_setup(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = HWGROUP(drive)->rq;
unsigned int reading;
u8 dma_stat;
if (rq_data_dir(rq))
reading = 0;
else
reading = 1 << 3;
/* fall back to pio! */
if (!ide_build_dmatable(drive, rq)) {
ide_map_sg(drive, rq);
return 1;
}
/* PRD table */
out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma);
/* specify r/w */
out_be32((void __iomem *)hwif->dma_command, reading);
/* read dma_status for INTR & ERROR flags */
dma_stat = in_be32((void __iomem *)hwif->dma_status);
/* clear INTR & ERROR flags */
out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
drive->waiting_for_dma = 1;
return 0;
}
/**
* scc_ide_dma_end - Stop DMA
* @drive: IDE drive
*
* Check and clear INT Status register.
* Then call __ide_dma_end().
*/
static int scc_ide_dma_end(ide_drive_t * drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long intsts_port = hwif->dma_base + 0x014;
u32 reg;
int dma_stat, data_loss = 0;
static int retry = 0;
/* errata A308 workaround: Step5 (check data loss) */
/* We don't check non ide_disk because it is limited to UDMA4 */
if (!(in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) &&
drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
reg = in_be32((void __iomem *)intsts_port);
if (!(reg & INTSTS_ACTEINT)) {
printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
drive->name);
data_loss = 1;
if (retry++) {
struct request *rq = HWGROUP(drive)->rq;
int unit;
/* ERROR_RESET and drive->crc_count are needed
* to reduce DMA transfer mode in retry process.
*/
if (rq)
rq->errors |= ERROR_RESET;
for (unit = 0; unit < MAX_DRIVES; unit++) {
ide_drive_t *drive = &hwif->drives[unit];
drive->crc_count++;
}
}
}
}
while (1) {
reg = in_be32((void __iomem *)intsts_port);
if (reg & INTSTS_SERROR) {
printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
continue;
}
if (reg & INTSTS_PRERR) {
u32 maea0, maec0;
unsigned long ctl_base = hwif->config_data;
maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
continue;
}
if (reg & INTSTS_RERR) {
printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
continue;
}
if (reg & INTSTS_ICERR) {
out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
continue;
}
if (reg & INTSTS_BMSINT) {
printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
ide_do_reset(drive);
continue;
}
if (reg & INTSTS_BMHE) {
out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
continue;
}
if (reg & INTSTS_ACTEINT) {
out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
continue;
}
if (reg & INTSTS_IOIRQS) {
out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
continue;
}
break;
}
dma_stat = __ide_dma_end(drive);
if (data_loss)
dma_stat |= 2; /* emulate DMA error (to retry command) */
return dma_stat;
}
/* returns 1 if dma irq issued, 0 otherwise */
static int scc_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
/* SCC errata A252,A308 workaround: Step4 */
if ((in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) &&
(int_stat & INTSTS_INTRQ))
return 1;
/* SCC errata A308 workaround: Step5 (polling IOIRQS) */
if (int_stat & INTSTS_IOIRQS)
return 1;
if (!drive->waiting_for_dma)
printk(KERN_WARNING "%s: (%s) called while not waiting\n",
drive->name, __FUNCTION__);
return 0;
}
static u8 scc_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
u8 mask = hwif->ultra_mask;
/* errata A308 workaround: limit non ide_disk drive to UDMA4 */
if ((drive->media != ide_disk) && (mask & 0xE0)) {
printk(KERN_INFO "%s: limit %s to UDMA4\n",
SCC_PATA_NAME, drive->name);
mask = ATA_UDMA4;
}
return mask;
}
/**
* setup_mmio_scc - map CTRL/BMID region
* @dev: PCI device we are configuring
* @name: device name
*
*/
static int setup_mmio_scc (struct pci_dev *dev, const char *name)
{
unsigned long ctl_base = pci_resource_start(dev, 0);
unsigned long dma_base = pci_resource_start(dev, 1);
unsigned long ctl_size = pci_resource_len(dev, 0);
unsigned long dma_size = pci_resource_len(dev, 1);
void __iomem *ctl_addr;
void __iomem *dma_addr;
int i;
for (i = 0; i < MAX_HWIFS; i++) {
if (scc_ports[i].ctl == 0)
break;
}
if (i >= MAX_HWIFS)
return -ENOMEM;
if (!request_mem_region(ctl_base, ctl_size, name)) {
printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
goto fail_0;
}
if (!request_mem_region(dma_base, dma_size, name)) {
printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
goto fail_1;
}
if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
goto fail_2;
if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
goto fail_3;
pci_set_master(dev);
scc_ports[i].ctl = (unsigned long)ctl_addr;
scc_ports[i].dma = (unsigned long)dma_addr;
pci_set_drvdata(dev, (void *) &scc_ports[i]);
return 1;
fail_3:
iounmap(ctl_addr);
fail_2:
release_mem_region(dma_base, dma_size);
fail_1:
release_mem_region(ctl_base, ctl_size);
fail_0:
return -ENOMEM;
}
/**
* init_setup_scc - set up an SCC PATA Controller
* @dev: PCI device
* @d: IDE port info
*
* Perform the initial set up for this device.
*/
static int __devinit init_setup_scc(struct pci_dev *dev,
const struct ide_port_info *d)
{
unsigned long ctl_base;
unsigned long dma_base;
unsigned long cckctrl_port;
unsigned long intmask_port;
unsigned long mode_port;
unsigned long ecmode_port;
unsigned long dma_status_port;
u32 reg = 0;
struct scc_ports *ports;
int rc;
rc = setup_mmio_scc(dev, d->name);
if (rc < 0) {
return rc;
}
ports = pci_get_drvdata(dev);
ctl_base = ports->ctl;
dma_base = ports->dma;
cckctrl_port = ctl_base + 0xff0;
intmask_port = dma_base + 0x010;
mode_port = ctl_base + 0x024;
ecmode_port = ctl_base + 0xf00;
dma_status_port = dma_base + 0x004;
/* controller initialization */
reg = 0;
out_be32((void*)cckctrl_port, reg);
reg |= CCKCTRL_ATACLKOEN;
out_be32((void*)cckctrl_port, reg);
reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
out_be32((void*)cckctrl_port, reg);
reg |= CCKCTRL_CRST;
out_be32((void*)cckctrl_port, reg);
for (;;) {
reg = in_be32((void*)cckctrl_port);
if (reg & CCKCTRL_CRST)
break;
udelay(5000);
}
reg |= CCKCTRL_ATARESET;
out_be32((void*)cckctrl_port, reg);
out_be32((void*)ecmode_port, ECMODE_VALUE);
out_be32((void*)mode_port, MODE_JCUSFEN);
out_be32((void*)intmask_port, INTMASK_MSK);
return ide_setup_pci_device(dev, d);
}
/**
* init_mmio_iops_scc - set up the iops for MMIO
* @hwif: interface to set up
*
*/
static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct scc_ports *ports = pci_get_drvdata(dev);
unsigned long dma_base = ports->dma;
ide_set_hwifdata(hwif, ports);
hwif->INB = scc_ide_inb;
hwif->INW = scc_ide_inw;
hwif->INSW = scc_ide_insw;
hwif->INSL = scc_ide_insl;
hwif->OUTB = scc_ide_outb;
hwif->OUTBSYNC = scc_ide_outbsync;
hwif->OUTW = scc_ide_outw;
hwif->OUTSW = scc_ide_outsw;
hwif->OUTSL = scc_ide_outsl;
hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
hwif->irq = dev->irq;
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
hwif->mmio = 1;
}
/**
* init_iops_scc - set up iops
* @hwif: interface to set up
*
* Do the basic setup for the SCC hardware interface
* and then do the MMIO setup.
*/
static void __devinit init_iops_scc(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->hwif_data = NULL;
if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_scc(hwif);
}
static u8 __devinit scc_cable_detect(ide_hwif_t *hwif)
{
return ATA_CBL_PATA80;
}
/**
* init_hwif_scc - set up hwif
* @hwif: interface to set up
*
* We do the basic set up of the interface structure. The SCC
* requires several custom handlers so we override the default
* ide DMA handlers appropriately.
*/
static void __devinit init_hwif_scc(ide_hwif_t *hwif)
{
struct scc_ports *ports = ide_get_hwifdata(hwif);
ports->hwif_id = hwif->index;
hwif->dma_command = hwif->dma_base;
hwif->dma_status = hwif->dma_base + 0x04;
hwif->dma_prdtable = hwif->dma_base + 0x08;
/* PTERADD */
out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
hwif->dma_setup = scc_dma_setup;
hwif->ide_dma_end = scc_ide_dma_end;
hwif->set_pio_mode = scc_set_pio_mode;
hwif->set_dma_mode = scc_set_dma_mode;
hwif->ide_dma_test_irq = scc_dma_test_irq;
hwif->udma_filter = scc_udma_filter;
if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
else
hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
hwif->cable_detect = scc_cable_detect;
}
#define DECLARE_SCC_DEV(name_str) \
{ \
.name = name_str, \
.init_iops = init_iops_scc, \
.init_hwif = init_hwif_scc, \
.host_flags = IDE_HFLAG_SINGLE | \
IDE_HFLAG_BOOTABLE, \
.pio_mask = ATA_PIO4, \
}
static const struct ide_port_info scc_chipsets[] __devinitdata = {
/* 0 */ DECLARE_SCC_DEV("sccIDE"),
};
/**
* scc_init_one - pci layer discovery entry
* @dev: PCI device
* @id: ident table entry
*
* Called by the PCI code when it finds an SCC PATA controller.
* We then use the IDE PCI generic helper to do most of the work.
*/
static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
}
/**
* scc_remove - pci layer remove entry
* @dev: PCI device
*
* Called by the PCI code when it removes an SCC PATA controller.
*/
static void __devexit scc_remove(struct pci_dev *dev)
{
struct scc_ports *ports = pci_get_drvdata(dev);
ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id];
unsigned long ctl_base = pci_resource_start(dev, 0);
unsigned long dma_base = pci_resource_start(dev, 1);
unsigned long ctl_size = pci_resource_len(dev, 0);
unsigned long dma_size = pci_resource_len(dev, 1);
if (hwif->dmatable_cpu) {
pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
ide_unregister(hwif->index);
hwif->chipset = ide_unknown;
iounmap((void*)ports->dma);
iounmap((void*)ports->ctl);
release_mem_region(dma_base, dma_size);
release_mem_region(ctl_base, ctl_size);
memset(ports, 0, sizeof(*ports));
}
static const struct pci_device_id scc_pci_tbl[] = {
{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
static struct pci_driver driver = {
.name = "SCC IDE",
.id_table = scc_pci_tbl,
.probe = scc_init_one,
.remove = scc_remove,
};
static int scc_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(scc_ide_init);
/* -- No exit code?
static void scc_ide_exit(void)
{
ide_pci_unregister_driver(&driver);
}
module_exit(scc_ide_exit);
*/
MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink