kevin/linux
1
Fork 0
Code
fbc90c042c
linux/include/video/tdfx.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

210 lines
5.3 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _TDFX_H
#define _TDFX_H
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
/* membase0 register offsets */
#define STATUS 0x00
#define PCIINIT0 0x04
#define SIPMONITOR 0x08
#define LFBMEMORYCONFIG 0x0c
#define MISCINIT0 0x10
#define MISCINIT1 0x14
#define DRAMINIT0 0x18
#define DRAMINIT1 0x1c
#define AGPINIT 0x20
#define TMUGBEINIT 0x24
#define VGAINIT0 0x28
#define VGAINIT1 0x2c
#define DRAMCOMMAND 0x30
#define DRAMDATA 0x34
/* reserved 0x38 */
/* reserved 0x3c */
#define PLLCTRL0 0x40
#define PLLCTRL1 0x44
#define PLLCTRL2 0x48
#define DACMODE 0x4c
#define DACADDR 0x50
#define DACDATA 0x54
#define RGBMAXDELTA 0x58
#define VIDPROCCFG 0x5c
#define HWCURPATADDR 0x60
#define HWCURLOC 0x64
#define HWCURC0 0x68
#define HWCURC1 0x6c
#define VIDINFORMAT 0x70
#define VIDINSTATUS 0x74
#define VIDSERPARPORT 0x78
#define VIDINXDELTA 0x7c
#define VIDININITERR 0x80
#define VIDINYDELTA 0x84
#define VIDPIXBUFTHOLD 0x88
#define VIDCHRMIN 0x8c
#define VIDCHRMAX 0x90
#define VIDCURLIN 0x94
#define VIDSCREENSIZE 0x98
#define VIDOVRSTARTCRD 0x9c
#define VIDOVRENDCRD 0xa0
#define VIDOVRDUDX 0xa4
#define VIDOVRDUDXOFF 0xa8
#define VIDOVRDVDY 0xac
/* ... */
#define VIDOVRDVDYOFF 0xe0
#define VIDDESKSTART 0xe4
#define VIDDESKSTRIDE 0xe8
#define VIDINADDR0 0xec
#define VIDINADDR1 0xf0
#define VIDINADDR2 0xf4
#define VIDINSTRIDE 0xf8
#define VIDCUROVRSTART 0xfc
#define INTCTRL (0x00100000 + 0x04)
#define CLIP0MIN (0x00100000 + 0x08)
#define CLIP0MAX (0x00100000 + 0x0c)
#define DSTBASE (0x00100000 + 0x10)
#define DSTFORMAT (0x00100000 + 0x14)
#define SRCBASE (0x00100000 + 0x34)
#define COMMANDEXTRA_2D (0x00100000 + 0x38)
#define CLIP1MIN (0x00100000 + 0x4c)
#define CLIP1MAX (0x00100000 + 0x50)
#define SRCFORMAT (0x00100000 + 0x54)
#define SRCSIZE (0x00100000 + 0x58)
#define SRCXY (0x00100000 + 0x5c)
#define COLORBACK (0x00100000 + 0x60)
#define COLORFORE (0x00100000 + 0x64)
#define DSTSIZE (0x00100000 + 0x68)
#define DSTXY (0x00100000 + 0x6c)
#define COMMAND_2D (0x00100000 + 0x70)
#define LAUNCH_2D (0x00100000 + 0x80)
#define COMMAND_3D (0x00200000 + 0x120)
/* register bitfields (not all, only as needed) */
/* COMMAND_2D reg. values */
#define TDFX_ROP_COPY 0xcc /* src */
#define TDFX_ROP_INVERT 0x55 /* NOT dst */
#define TDFX_ROP_XOR 0x66 /* src XOR dst */
#define AUTOINC_DSTX BIT(10)
#define AUTOINC_DSTY BIT(11)
#define COMMAND_2D_FILLRECT 0x05
#define COMMAND_2D_S2S_BITBLT 0x01 /* screen to screen */
#define COMMAND_2D_H2S_BITBLT 0x03 /* host to screen */
#define COMMAND_3D_NOP 0x00
#define STATUS_RETRACE BIT(6)
#define STATUS_BUSY BIT(9)
#define MISCINIT1_CLUT_INV BIT(0)
#define MISCINIT1_2DBLOCK_DIS BIT(15)
#define DRAMINIT0_SGRAM_NUM BIT(26)
#define DRAMINIT0_SGRAM_TYPE BIT(27)
#define DRAMINIT0_SGRAM_TYPE_MASK (BIT(27) | BIT(28) | BIT(29))
#define DRAMINIT0_SGRAM_TYPE_SHIFT 27
#define DRAMINIT1_MEM_SDRAM BIT(30)
#define VGAINIT0_VGA_DISABLE BIT(0)
#define VGAINIT0_EXT_TIMING BIT(1)
#define VGAINIT0_8BIT_DAC BIT(2)
#define VGAINIT0_EXT_ENABLE BIT(6)
#define VGAINIT0_WAKEUP_3C3 BIT(8)
#define VGAINIT0_LEGACY_DISABLE BIT(9)
#define VGAINIT0_ALT_READBACK BIT(10)
#define VGAINIT0_FAST_BLINK BIT(11)
#define VGAINIT0_EXTSHIFTOUT BIT(12)
#define VGAINIT0_DECODE_3C6 BIT(13)
#define VGAINIT0_SGRAM_HBLANK_DISABLE BIT(22)
#define VGAINIT1_MASK 0x1fffff
#define VIDCFG_VIDPROC_ENABLE BIT(0)
#define VIDCFG_CURS_X11 BIT(1)
#define VIDCFG_INTERLACE BIT(3)
#define VIDCFG_HALF_MODE BIT(4)
#define VIDCFG_DESK_ENABLE BIT(7)
#define VIDCFG_CLUT_BYPASS BIT(10)
#define VIDCFG_2X BIT(26)
#define VIDCFG_HWCURSOR_ENABLE BIT(27)
#define VIDCFG_PIXFMT_SHIFT 18
#define DACMODE_2X BIT(0)
/* I2C bit locations in the VIDSERPARPORT register */
#define DDC_ENAB 0x00040000
#define DDC_SCL_OUT 0x00080000
#define DDC_SDA_OUT 0x00100000
#define DDC_SCL_IN 0x00200000
#define DDC_SDA_IN 0x00400000
#define I2C_ENAB 0x00800000
#define I2C_SCL_OUT 0x01000000
#define I2C_SDA_OUT 0x02000000
#define I2C_SCL_IN 0x04000000
#define I2C_SDA_IN 0x08000000
/* VGA rubbish, need to change this for multihead support */
#define MISC_W 0x3c2
#define MISC_R 0x3cc
#define SEQ_I 0x3c4
#define SEQ_D 0x3c5
#define CRT_I 0x3d4
#define CRT_D 0x3d5
#define ATT_IW 0x3c0
#define IS1_R 0x3da
#define GRA_I 0x3ce
#define GRA_D 0x3cf
#ifdef __KERNEL__
struct banshee_reg {
/* VGA rubbish */
unsigned char att[21];
unsigned char crt[25];
unsigned char gra[9];
unsigned char misc[1];
unsigned char seq[5];
/* Banshee extensions */
unsigned char ext[2];
unsigned long vidcfg;
unsigned long vidpll;
unsigned long mempll;
unsigned long gfxpll;
unsigned long dacmode;
unsigned long vgainit0;
unsigned long vgainit1;
unsigned long screensize;
unsigned long stride;
unsigned long cursloc;
unsigned long curspataddr;
unsigned long cursc0;
unsigned long cursc1;
unsigned long startaddr;
unsigned long clip0min;
unsigned long clip0max;
unsigned long clip1min;
unsigned long clip1max;
unsigned long miscinit0;
};
struct tdfx_par;
struct tdfxfb_i2c_chan {
struct tdfx_par *par;
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
};
struct tdfx_par {
u32 max_pixclock;
u32 palette[16];
void __iomem *regbase_virt;
unsigned long iobase;
int wc_cookie;
#ifdef CONFIG_FB_3DFX_I2C
struct tdfxfb_i2c_chan chan[2];
#endif
};
#endif /* __KERNEL__ */
#endif /* _TDFX_H */
View Git Blame Copy Permalink